{"title":"1989-1993 5.9L 12V Cummins Lift Pumps, Fuel Pumps \u0026 Fuel System","description":null,"products":[{"product_id":"aeromotive-130gph-fuel-pump-pump-only-11802","title":"Aeromotive 130GPH Fuel Pump (Pump Only)","description":"\u003cp\u003eThe Aeromotive 11802 Fuel Pump offers a true solution to Duramax, Cummins and Powerstroke owners looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel Pump addresses the common failure points and issues that have plagued the market for years.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFiltration:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1\"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eShaft Seals \u0026amp; Pump Design:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eLike all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eExtreme Climates:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAeromotive understands that some need their trucks in harsh environments. For the extreme cold, the Aeromotive 11802 features (2) 8-AN ports to allow engine coolant to warm the pump body. In addition, the pump is a completely sealed unit allowing it to get wet or be submerged without skipping a beat.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFuel Pressure:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. The 11802 also comes standard with a pump mounted gauge so you can refine your pressure tuning without having to guess.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e||||\u003cul\u003e\n\u003cli\u003e130 GPH @ 10 PSI\u003c\/li\u003e\n\u003cli\u003ePump Only (No Installation Kit)\u003c\/li\u003e\n\u003cli\u003eIdeal For Custom Applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e Quick-Connect fittings shown installed in pump are for display only. Pump fittings and installation kit are not included. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073138581661,"sku":"11802","price":1414.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662903.jpg?v=1713403400"},{"product_id":"aeromotive-230gph-fuel-pump-pump-only-11806","title":"Aeromotive 230GPH Fuel Pump (Pump Only)","description":"\u003cp\u003eThe Aeromotive 11806 Fuel Pump offers a true solution to Duramax, Cummins and Powerstroke owners looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel Pump addresses the common failure points and issues that have plagued the market for years.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFiltration:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1\"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eShaft Seals \u0026amp; Pump Design:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eLike all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFuel Pressure:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRace Pump \u003c\/li\u003e\n\u003cli\u003e230 GPH @ 10 PSI \u003c\/li\u003e\n\u003cli\u003ePump Only (No Installation Kit)\u003c\/li\u003e\n\u003cli\u003eIdeal For Custom Applications \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e Quick-Connect fittings shown installed in pump are for display only. Pump fittings and installation kit are not included. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073139171485,"sku":"11806","price":1760.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662912.jpg?v=1713403413"},{"product_id":"aeromotive-5-8-pickup-1-2-return-kit","title":"Aeromotive 5\/8\" Pickup \u0026 1\/2\" Return Kit","description":"\u003cp\u003e\n\u003c\/p\u003e\u003cp\u003eThe Aeromotive 11805 5\/8\" Pickup \u0026amp; 1\/2\" Return Kit provides you with the necessary plumbing components for installing the Aeromotive 11802 Fuel Pump on your truck. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073139237021,"sku":"11805","price":490.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662911.jpg?v=1713403415"},{"product_id":"airdog-100-gph-fuel-lift-pump-for-89-93-5-9l-cummins-a4spbd136","title":"AirDog 100 GPH Fuel Lift Pump For 89-93 5.9L Cummins","description":"\u003cp\u003e\u003cstrong\u003eAirDog 100 GPH Fuel Lift Pump For 1989-1993 Dodge Ram 5.9L Cummins\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003eThis is the AirDog I FP-100 fuel system for the 1989-1993 Dodge Ram with the VE44 Cummins. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. The AirDog picks up fuel through the factory suction line, in the fuel module. The pressure side connects directly to the VE injection pump, bypassing the factory fuel filter housing and factory fuel pump. The AirDog Air\/Vapor return is sent back to the tank through a filler neck tee. This is a 100GPH (Gallon Per Hour) lift pump system.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAirDog 100 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePreset @ 10-13 PSI\u003c\/li\u003e\n\n\u003cli\u003eFlows 100 Gallons Per Hour\u003c\/li\u003e\n\n\u003cli\u003eSupports Stock-500HP Applications\u003c\/li\u003e\n\n\u003cli\u003eSmoother Idle \u0026amp; Acceleration\u003c\/li\u003e\n\n\u003cli\u003eImproved Throttle Response\u003c\/li\u003e\n\n\u003cli\u003eCARB E.O. Number D-595-3\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cdiv class=\"iframe-wrap embed-responsive embed-responsive-16by9\"\u003e\n\n\u003cdiv class=\"iframe-wrap embed-responsive embed-responsive-16by9\"\u003e\u003ciframe class=\"embed-responsive-item\" src=\"https:\/\/www.youtube.com\/embed\/ujokaEkF8Z0\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\" data-mce-fragment=\"1\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Pictures of the Fuel System may vary. Please refer to the listing title and product description for correct Fuel System.\u003c\/p\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073144512669,"sku":"A4SPBD136","price":751.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198709554.png?v=1713403525"},{"product_id":"airdog-raptor-4g-100-gph-fuel-lift-pump-for-89-93-5-9l-cummins-r4sbd348","title":"AirDog Raptor 4G 100 GPH Fuel Lift Pump For 89-93 5.9L Cummins","description":"\u003cp\u003e\u003cstrong\u003eAirDog Raptor 4G 100 GPH Fuel Lift Pump For 1989-1993 Dodge Ram 5.9L Cummins\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThis is the Raptor-4G RP-100 fuel system for the 1989-1993 VE-44 12V Cummins. This system mounts to the frame rail using the supplied sandwich plate mounting system. The suction line connects to the factory suction fitting on top of the fuel module. The pressure side connects directly into the side of the fuel filter housing on the engine block. These pumps are internally regulated and do not require a return line. This is a 100GPH (Gallon Per Hour) fuel system for stock fuel trucks.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAirDog Raptor 4G 100 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePreset @ 10-13 PSI\u003c\/li\u003e\n\n\u003cli\u003eFlows 100 Gallons Per Hour\u003c\/li\u003e\n\n\u003cli\u003eNo Return Line Needed\u003c\/li\u003e\n\n\u003cli\u003e4G Technology\u003c\/li\u003e\n\n\u003cli\u003eSmoother Idle \u0026amp; Acceleration\u003c\/li\u003e\n\n\u003cli\u003eGerotor Pump Design\u003c\/li\u003e\n\n\u003cli\u003eImproved Throttle Response\u003c\/li\u003e\n\n\u003cli\u003eCARB E.O. Number D-595-3\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Pictures of the Fuel System may vary. Please refer to the listing title and product description for correct Fuel System.\u003c\/p\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073146970269,"sku":"R4SBD348","price":504.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198709924.png?v=1713403570"},{"product_id":"airdog-fp-150-4g-fuel-system-for-1989-1993-dodge-ram-5-9l-cummins-a4spbd137","title":"AirDog FP-150-4G Fuel System For 1989-1993 Dodge\/Ram 5.9L CUMMINS","description":"\u003cp\u003eThis is the AirDog I FP-150-4G fuel system for the 1989-1993 Dodge Ram with the VE44 Cummins. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. A 1\/2\" draw straw is used to pull fuel from the tank. The pressure side connects directly to the VE injection pump, bypassing the factory fuel filter housing and fuel pump. The AirDog Air\/Vapor return is sent back to the tank through a filler neck tee. This is a 150GPH (Gallon Per Hour) lift pump system. Check out our installation manual for a list of parts that are included with this kit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePreset @ 10 PSI\u003c\/li\u003e\n\n\u003cli\u003eFlows 150 Gallons Per Hour\u003c\/li\u003e\n\n\u003cli\u003eSupports Stock-800HP Applications\u003c\/li\u003e\n\n\u003cli\u003eSmoother Idle \u0026amp; Acceleration\u003c\/li\u003e\n\n\u003cli\u003eImproved Throttle Response\u003c\/li\u003e\n\n\u003cli\u003eCARB E.O. Number D-595-3\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul class=\"productInfo\"\u003e\n\n\u003cli class=\"wsm_product_info_weight\"\u003e\n\u003clabel\u003eWeight:\u003c\/label\u003e 27.0 lbs.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e1993 Dodge\/Ram 5.9L CUMMINS\u003c\/li\u003e\n\n\u003cli\u003e1992 Dodge\/Ram 5.9L CUMMINS\u003c\/li\u003e\n\n\u003cli\u003e1991 Dodge\/Ram 5.9L CUMMINS\u003c\/li\u003e\n\n\u003cli\u003e1990 Dodge\/Ram 5.9L CUMMINS\u003c\/li\u003e\n\n\u003cli\u003e1989 Dodge\/Ram 5.9L CUMMINS 11 USA\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073149919389,"sku":"A4SPBD137","price":774.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198814944.jpg?v=1713403599"},{"product_id":"airdog-raptor-4g-150-gph-fuel-lift-pump-for-89-93-5-9l-cummins-r4sbd349","title":"AirDog Raptor 4G 150 GPH Fuel Lift Pump For 89-93 5.9L Cummins","description":"\u003cp\u003e\u003cstrong\u003eAirDog Raptor 4G 150 GPH Fuel Lift Pump For 1989-1993 Dodge Ram 5.9L Cummins\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003eThis is the Raptor-4G RP-150 fuel system for the 1989-1993 VE-44 12V Cummins. This system mounts to the frame rail using the supplied sandwich plate mounting system. The suction line connects to the factory suction fitting on top of the fuel module. The pressure side connects directly into the side of the fuel filter housing on the engine block. These pumps are internally regulated and do not require a return line. This is a 150GPH (Gallon Per Hour) fuel system for moderately modified trucks.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAirDog Raptor 4G 150 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePreset @ 8-10 PSI\u003c\/li\u003e\n\n\u003cli\u003eFlows 150 Gallons Per Hour\u003c\/li\u003e\n\n\u003cli\u003eNo Return Line Needed\u003c\/li\u003e\n\n\u003cli\u003e4G Technology\u003c\/li\u003e\n\n\u003cli\u003eSmoother Idle \u0026amp; Acceleration\u003c\/li\u003e\n\n\u003cli\u003eGerotor Pump Design\u003c\/li\u003e\n\n\u003cli\u003eImproved Throttle Response\u003c\/li\u003e\n\n\u003cli\u003eCARB E.O. Number D-595-3\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Pictures of the Fuel System may vary. Please refer to the listing title and product description for correct Fuel System.\u003c\/p\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073150967965,"sku":"R4SBD349","price":509.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198709928.png?v=1713403632"},{"product_id":"airdog-ii-5g-df-100-5g-fuel-system-for-1989-1993-dodge-ram-5-9l-cummins-a7spbd338","title":"AirDog II-5G, DF-100-5G Fuel System For 1989-1993 Dodge\/Ram 5.9L Cummins","description":"\u003cp\u003eThis is the AirDog II-5G DF-100 fuel system for the 1989-1993 Dodge Ram 12V VE-44 5.9L Cummins. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. The suction side hooks up to the factory suction fitting in the fuel module. The pressure side connects directly into the side of the injection pump, bypassing the factory fuel filter housing and factory , block mounted, fuel pump. The AirDog Air\/Vapor return is sent back to the tank through a filler neck tee. This is a 100GPH (Gallon Per Hour) lift pump system for stock fuel trucks. Check out our installation manual for a list of parts that are included with this kit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePreset @ 10-13 PSI\u003c\/li\u003e\n\n\u003cli\u003eFlows 100 Gallons Per Hour\u003c\/li\u003e\n\n\u003cli\u003eSupports Stock-500HP Applications\u003c\/li\u003e\n\n\u003cli\u003eSmoother Idle \u0026amp; Acceleration\u003c\/li\u003e\n\n\u003cli\u003eImproved Throttle Response\u003c\/li\u003e\n\n\u003cli\u003eCARB E.O. Number D-595-3\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul class=\"productInfo\"\u003e\n\n\u003cli class=\"wsm_product_info_weight\"\u003e\n\u003clabel\u003eWeight:\u003c\/label\u003e 27.0 lbs.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e1993 Dodge\/Ram 5.9L CUMMINS\u003c\/li\u003e\n\n\u003cli\u003e1992 Dodge\/Ram 5.9L CUMMINS\u003c\/li\u003e\n\n\u003cli\u003e1991 Dodge\/Ram 5.9L CUMMINS\u003c\/li\u003e\n\n\u003cli\u003e1990 Dodge\/Ram 5.9L CUMMINS\u003c\/li\u003e\n\n\u003cli\u003e1989 Dodge\/Ram 5.9L CUMMINS\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cdiv class=\"iframe-wrap embed-responsive embed-responsive-16by9\"\u003e \u003c\/div\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073152049309,"sku":"A7SPBD338","price":858.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198814949.jpg?v=1713403660"},{"product_id":"fass-titanium-100gph-signature-series-diesel-fuel-lift-pump-for-89-93-5-9l-cummins-tsd02100g","title":"FASS Titanium 100GPH Signature Series Diesel Fuel Lift Pump For 89-93 5.9L Cummins","description":"\u003ch2\u003eFASS FUEL SYSTEMS DIESEL LIFT PUMP 1989-1993 Dodge Cummins 5.9L TITANIUM SIGNATURE SERIES 100GPH (TS D02 100G)\u003c\/h2\u003e\n\u003cp\u003eThe Titanium Signature Series diesel fuel system was engineered by FASS Diesel Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration system in the diesel industry. Rated at 100 gallons per hour and backed by our limited lifetime warranty the Titanium Signature Series fuel system can support your Dodge Cummins engine with enough fuel for up to 600 HP. A Titanium Signature Series fuel system also offers advanced filtration benefits that will help protect your injection system, effectively extending the life of both your Injection Pump and Injectors. Benefits include FASS Diesel Fuel Systems patented air\/vapor removal process.\u003c\/p\u003e\n\u003cp\u003eThe Titanium Signature Series diesel fuel systems are the superior fuel pump and filtration system, in the diesel industry. This is because here at FASS Diesel Fuel Systems we focus on perfecting our pumps and how they are engineered, taking the extra steps that our competitors ignore while they rush to get product out the door. By doing this we have less than a 2% failure rating with our motor and a design that implements unique design features you can only get with FASS Diesel Fuel Systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca\u003e\u003cstrong\u003eFASS Whisper Technology (FWT)\u003c\/strong\u003e\u003c\/a\u003e was engineered to meet the stringent demands of today’s quiet diesel engines. FASS Whisper Technology was in development and testing for over two and a half years to meet FASS Fuel System’s high quality and durability standards. FASS Whisper Technology effectively and drastically reduces the sound levels of the Signature Series FASS Diesel Fuel System to a “whisper”while at the same time increasing fuel flow rates. Our competition reduces noise levels by reducing flow rates.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca\u003e\u003cstrong\u003ePerformance Radius Cuts (PRC)\u003c\/strong\u003e\u003c\/a\u003e are an advanced machining technique used to improve the flow of fuel through the FASS System by creating smooth flowing cuts within the aluminum housing. This prevents the reintroduction of air and vapor back into the fuel and to prevent eddy currents from forming within the corner of a 90-degree sharp angle. FASS Titanium Signature Fuel Systems are the only Fuel Air Separation System that incorporates these exclusive Performance Radius Cuts, lesser competitors commonly use T-Bone and square 90-degree fittings that can limit fuel flow, cause restrictions and reintroduce air back into your fuel.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca\u003e\u003cstrong\u003eMass Flow Return (MFR)\u003c\/strong\u003e\u003c\/a\u003e technology is used to continually polish your fuel by keeping a positive pressure on the fuel being delivered to the engine to prevent cavitation along with galling and scoring. Then returning the fuel, that’s not yet needed, back to the tank after it has been passed through the filtration process, removing dirt, air, vapor and water. This means your fuel is being constantly “Polished” (cleaned), guaranteeing that your diesel truck always has the cleanest fuel possible. The MFR in combination with the optional FASS Fuel Heater options will help insure “EXTREME” cold weather operations!\u003c\/li\u003e\n\u003cli\u003e\n\u003ca\u003e\u003cstrong\u003eBolt On Bracket Mounts\u003c\/strong\u003e\u003c\/a\u003e old mounting styles required drilling or welding when mounting your new pump. This has now been simplified with our new bolt on brackets that utilize your Ford Super Duty factory bed bolt, the bolt that secures your truck bed to your frame. Mounting your Titanium Signature Series lift pump takes only minutes and all brackets are made from machined steel for superior support and strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e1989-1993 DODGE CUMMINS 5.9L LIFT PUMP FEATURES:\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eNew Whisper Technology\u003c\/li\u003e\n\u003cli\u003eComplete Replacement Pump\u003c\/li\u003e\n\u003cli\u003e100 Gallons Per Hour Flow Rating\u003c\/li\u003e\n\u003cli\u003eRemoves Water, Air and Debris From Diesel Fuel\u003c\/li\u003e\n\u003cli\u003e2 Micron Filtration Rating\u003c\/li\u003e\n\u003cli\u003eProtects and Extends The Life Of Your Injectors\u003c\/li\u003e\n\u003cli\u003eImproved Cold Weather Starts\u003c\/li\u003e\n\u003cli\u003eDecreases Carbon Monoxide and Carbon Dioxide Emissions\u003c\/li\u003e\n\u003cli\u003e½ Inch Fuel Lines and Ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eFuel Mileage Improvement\u003c\/li\u003e\n\u003cli\u003eImproved Fuel Volume Delivery\u003c\/li\u003e\n\u003cli\u003eSmoother Engine Idle\u003c\/li\u003e\n\u003cli\u003eOptional Electric Heater Ports\u003c\/li\u003e\n\u003cli\u003eOptional Fuel Pressure Gauge Port\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\u003cli\u003eQuietest Motor On The Market\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"FASS","offers":[{"title":"Default Title","offer_id":45074894160029,"sku":"TSD02100G","price":694.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198715435.png?v=1713410336"},{"product_id":"fass-titanium-165gph-signature-series-diesel-fuel-lift-pump-for-89-93-5-9l-cummins-tsd02165g","title":"FASS Titanium 165GPH Signature Series Diesel Fuel Lift Pump For 89-93 5.9L Cummins","description":"\u003ch2\u003eFASS FUEL SYSTEMS DIESEL LIFT PUMP 1989-1993 Dodge Cummins 5.9L TITANIUM SIGNATURE SERIES 165GPH (TS F16 165G)\u003c\/h2\u003e\n\u003cp\u003eThe Titanium Signature Series diesel fuel system was engineered by FASS Diesel Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration system in the diesel industry. Rated at 165 gallons per hour and backed by our limited lifetime warranty the Titanium Signature Series fuel system can support your Dodge Cummins engine with enough fuel for up to 600-900 HP. A Titanium Signature Series fuel system also offers advanced filtration benefits that will help protect your injection system, effectively extending the life of both your Injection Pump and Injectors. Benefits include FASS Diesel Fuel Systems patented air\/vapor removal process.\u003c\/p\u003e\n\u003cp\u003eThe Titanium Signature Series diesel fuel systems are the superior fuel pump and filtration system, in the diesel industry. This is because here at FASS Diesel Fuel Systems we focus on perfecting our pumps and how they are engineered, taking the extra steps that our competitors ignore while they rush to get product out the door. By doing this we have less than a 2% failure rating with our motor and a design that implements unique design features you can only get with FASS Diesel Fuel Systems.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca\u003e\u003cstrong\u003eFASS Whisper Technology (FWT)\u003c\/strong\u003e\u003c\/a\u003e was engineered to meet the stringent demands of today’s quiet diesel engines. FASS Whisper Technology was in development and testing for over two and a half years to meet FASS Fuel System’s high quality and durability standards. FASS Whisper Technology effectively and drastically reduces the sound levels of the Signature Series FASS Diesel Fuel System to a “whisper”while at the same time increasing fuel flow rates. Our competition reduces noise levels by reducing flow rates.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca\u003e\u003cstrong\u003ePerformance Radius Cuts (PRC)\u003c\/strong\u003e\u003c\/a\u003e are an advanced machining technique used to improve the flow of fuel through the FASS System by creating smooth flowing cuts within the aluminum housing. This prevents the reintroduction of air and vapor back into the fuel and to prevent eddy currents from forming within the corner of a 90-degree sharp angle. FASS Titanium Signature Fuel Systems are the only Fuel Air Separation System that incorporates these exclusive Performance Radius Cuts, lesser competitors commonly use T-Bone and square 90-degree fittings that can limit fuel flow, cause restrictions and reintroduce air back into your fuel.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca\u003e\u003cstrong\u003eMass Flow Return (MFR)\u003c\/strong\u003e\u003c\/a\u003e technology is used to continually polish your fuel by keeping a positive pressure on the fuel being delivered to the engine to prevent cavitation along with galling and scoring. Then returning the fuel, that’s not yet needed, back to the tank after it has been passed through the filtration process, removing dirt, air, vapor and water. This means your fuel is being constantly “Polished” (cleaned), guaranteeing that your diesel truck always has the cleanest fuel possible. The MFR in combination with the optional FASS Fuel Heater options will help insure “EXTREME” cold weather operations!\u003c\/li\u003e\n\u003cli\u003e\n\u003ca\u003e\u003cstrong\u003eBolt On Bracket Mounts\u003c\/strong\u003e\u003c\/a\u003e old mounting styles required drilling or welding when mounting your new pump. This has now been simplified with our new bolt on brackets that utilize your Ford Super Duty factory bed bolt, the bolt that secures your truck bed to your frame. Mounting your Titanium Signature Series lift pump takes only minutes and all brackets are made from machined steel for superior support and strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e1989-1993 DODGE CUMMINS 5.9L LIFT PUMP FEATURES:\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eNew Whisper Technology\u003c\/li\u003e\n\u003cli\u003eComplete Replacement Pump\u003c\/li\u003e\n\u003cli\u003e165 Gallons Per Hour Flow Rating\u003c\/li\u003e\n\u003cli\u003eRemoves Water, Air and Debris From Diesel Fuel\u003c\/li\u003e\n\u003cli\u003e2 Micron Filtration Rating\u003c\/li\u003e\n\u003cli\u003eProtects and Extends The Life Of Your Injectors\u003c\/li\u003e\n\u003cli\u003eImproved Cold Weather Starts\u003c\/li\u003e\n\u003cli\u003eDecreases Carbon Monoxide and Carbon Dioxide Emissions\u003c\/li\u003e\n\u003cli\u003e½ Inch Fuel Lines and Ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eFuel Mileage Improvement\u003c\/li\u003e\n\u003cli\u003eImproved Fuel Volume Delivery\u003c\/li\u003e\n\u003cli\u003eSmoother Engine Idle\u003c\/li\u003e\n\u003cli\u003eOptional Electric Heater Ports\u003c\/li\u003e\n\u003cli\u003eOptional Fuel Pressure Gauge Port\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\u003cli\u003eQuietest Motor On The Market\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e \u003c\/h3\u003e","brand":"FASS","offers":[{"title":"Default Title","offer_id":45074894717085,"sku":"TSD02165G","price":744.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198715438.png?v=1713410337"},{"product_id":"fass-adjustable-diesel-fuel-lift-pump-100gph-for-89-93-5-9l-cummins-fasd02100g","title":"FASS Adjustable Diesel Fuel Lift Pump 100GPH For 89-93 5.9L Cummins","description":"\u003ch2\u003eFASS FUEL SYSTEMS ADJUSTABLE DIESEL FUEL LIFT PUMP 100GPH 1989-1993 DODGE 5.9L CUMMINS (FAS D02 100G)\u003c\/h2\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eOur FASS Fuel Systems Signature Series Adjustable Diesel Fuel Pumps are designed to be the most versatile high performance fuel pump on the market that allows for adjustable fuel pressures to meet the demand of high performance Dodge Cummins 12 Valve applications. Manufactured with the same motor used in our Titanium Signature Series pumps, this adjustable fuel pump is rated at 100 gallons of diesel fuel per hour and offers adjustable fuel pressure from 1-20 PSI to customize fuel delivery for race or competition diesel engines. To aid in proper performance we built in a boost compensation port, air pressure from your intake manifold raises fuel pressures while under full throttle, maintaining fuel pressure when it matters most.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eCUMMINS ADJUSTABLE LIFT PUMP FEATURES:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eWhisper Technology\u003c\/li\u003e\n\n\u003cli\u003eAdjustable Fuel Pressure 1-20 PSI\u003c\/li\u003e\n\n\u003cli\u003eHigh Performance 100GPH\u003c\/li\u003e\n\n\u003cli\u003eImproves Fuel Flow\u003c\/li\u003e\n\n\u003cli\u003eBoost Compensation Port\u003c\/li\u003e\n\n\u003cli\u003eBuilt In Fuel Pressure Gauge Port\u003c\/li\u003e\n\n\u003cli\u003eAll Mounting Hardware Included\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is a fuel pump only and must be used with your factory fuel filter. It is suggested that all pumps be adjusted only if you have installed a fuel pressure gauge, for questions please contact our technical support team.\u003c\/p\u003e","brand":"FASS","offers":[{"title":"Default Title","offer_id":45074938953885,"sku":"FASD02100G","price":591.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198716129.png?v=1713410643"},{"product_id":"fass-adjustable-diesel-fuel-lift-pump-165gph-for-89-93-5-9l-cummins-fasd02165g","title":"FASS Adjustable Diesel Fuel Lift Pump 165GPH For 89-93 5.9L Cummins","description":"\u003ch2\u003eFASS FUEL SYSTEMS ADJUSTABLE DIESEL FUEL LIFT PUMP 165GPH 1989-1993 DODGE 5.9L CUMMINS (FAS D02 165G)\u003c\/h2\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eOur FASS Fuel Systems Signature Series Adjustable Diesel Fuel Pumps are designed to be the most versatile high performance fuel pump on the market that allows for adjustable fuel pressures to meet the demand of high performance Dodge Cummins 12 Valve applications. Manufactured with the same motor used in our Titanium Signature Series pumps, this adjustable fuel pump is rated at 165 gallons of diesel fuel per hour and offers adjustable fuel pressure from 1-20 PSI to customize fuel delivery for race or competition diesel engines. To aid in proper performance we built in a boost compensation port, air pressure from your intake manifold raises fuel pressures while under full throttle, maintaining fuel pressure when it matters most.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003ch3\u003eCUMMINS ADJUSTABLE LIFT PUMP FEATURES:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eWhisper Technology\u003c\/li\u003e\n\n\u003cli\u003eAdjustable Fuel Pressure 1-20 PSI\u003c\/li\u003e\n\n\u003cli\u003eHigh Performance 165GPH\u003c\/li\u003e\n\n\u003cli\u003eImproves Fuel Flow\u003c\/li\u003e\n\n\u003cli\u003eBoost Compensation Port\u003c\/li\u003e\n\n\u003cli\u003eBuilt In Fuel Pressure Gauge Port\u003c\/li\u003e\n\n\u003cli\u003eAll Mounting Hardware Included\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is a fuel pump only and must be used with your factory fuel filter. It is suggested that all pumps be adjusted only if you have installed a fuel pressure gauge, for questions please contact our technical support team.\u003c\/p\u003e","brand":"FASS","offers":[{"title":"Default Title","offer_id":45074938986653,"sku":"FASD02165G","price":644.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198716131.png?v=1713410643"},{"product_id":"fleece-performance-mechanical-fuel-pump-block-off-plate-for-89-18-5-9l-6-7l-cummins-fpe-cumm-fbop","title":"Fleece Performance Mechanical Fuel Pump Block-Off Plate For 89-18 5.9L \u0026 6.7L Cummins","description":"\u003cp\u003e\u003cstrong\u003eFleece Performance Mechanical Fuel Pump Block-Off Plate For 1989-2018 Dodge Ram 5.9L \u0026amp; 6.7L Cummins\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eHave you upgraded from your factory mechanical lift pump to an electric pump? This block off will eliminate the void left by your stock pump.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eBolts\u003c\/li\u003e\n\n\u003cli\u003eBillet Cover\u003c\/li\u003e\n\n\u003cli\u003eO-Ring\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e1989-2007 Dodge Ram 5.9L Cummins\u003c\/li\u003e\n\n\u003cli\u003e2007.5-2018 Dodge Ram 6.7L Cummins\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":45075132350621,"sku":"FPE-CUMM-FBOP","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198721313.png?v=1713412134"},{"product_id":"airdog-150-gph-lift-pump-fuel-bowl-bypass-sump-for-2001-2010-gm-6-6l-duramax-a4spbc188-dp0056-dp0028","title":"AirDog 150 GPH Lift Pump\/Fuel Bowl Bypass\/Sump For 2001-2010 GM 6.6L Duramax","description":"\u003cp\u003eThe PureFlow AirDog 150GPH Air\/Fuel Separation System for your 2001-2010 GM 6.6L Duramax provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel. The AirDog is lift pump and filter system, that enhances the fuel delivery to your engine with a commercial duty system.\u003c\/p\u003e\n\n\u003cp\u003eYour High Performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air\/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air\/vapor can cause galling and pitting of the injector barrel\/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time!\u003c\/p\u003e\n\n\u003cp\u003eThe Airdog works by pulling fuel from the fuel tank containing entrained air\/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air\/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air\/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation.\u003c\/p\u003e\n\n\u003cp\u003eThe Rudy's Duramax Fuel Filter Delete for your 2001-2016 GM 6.6L Duramax is for use after the installation of an AirDog or FASS Fuel Air Separation System. Once installed the factory fuel filter is no longer needed and can be easily removed by using this factory fuel filter canister delete. Because your Duramax fuel filter is located after the AirDog or FASS filtration system you will still need to replace the factory filter every 5,000-8,000 miles. This filter delete kit will replace your now useless fuel filter with a spin on canister that will allow fuel to flow freely into the engine, saving you even more money. This spin on fuel filter delete kit is a perfect addition to your AirDog or FASS Titanium diesel fuel pump and comes with all required hardware for a professional installation.\u003c\/p\u003e\n\n\u003cp\u003eFuel Sumps are nothing new these days, you see them everywhere and every company seems to have one. What we have done is step the tank sump up a notch. Made from 6061 Billet aluminum this sump is built like a tank and is super simple to install. While still using a no-tank drop design we have made this sump to where it will install with 1 single bolt with one single 3\" hole in your tank. This means less places to leak and much quicker install.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eSmall \u0026amp; Compact\u003c\/li\u003e\n\n\u003cli\u003eDual Feed Gerotor Pump\u003c\/li\u003e\n\n\u003cli\u003eLow Amperage Motor for Efficiency and Endurance\u003c\/li\u003e\n\n\u003cli\u003eSelf-aligning Motor for Less Maintenance \u0026amp; Less Noise\u003c\/li\u003e\n\n\u003cli\u003eIntermediate Pump Shaft to Separate the Motor from Fuel\u003c\/li\u003e\n\n\u003cli\u003eQuick Connect Components\u003c\/li\u003e\n\n\u003cli\u003eFlow Rate of 150 GPH\u003c\/li\u003e\n\n\u003cli\u003eMounts to Frame\u003c\/li\u003e\n\n\u003cli\u003eRetains WIF (Water In Fuel) Sensor\u003c\/li\u003e\n\n\u003cli\u003eInstalls In Place Of Stock Filter\u003c\/li\u003e\n\n\u003cli\u003eAllows For Unrestricted Fuel Flow To Engine\u003c\/li\u003e\n\n\u003cli\u003eBuilt-In Drain Plug\u003c\/li\u003e\n\n\u003cli\u003eDual O-Ring Design\u003c\/li\u003e\n\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2001-2010 Chevrolet Silverado 2500HD\/3500HD 6.6L Duramax LB7\/LLY\/LBZ\/LMM\u003c\/li\u003e\n\n\u003cli\u003e2001-2010 GMC Sierra 2500HD\/3500HD 6.6L Duramax LB7\/LLY\/LBZ\/LMM\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAirdog comes with Limited Lifetime Warranty, when registered properly\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45076116504733,"sku":"A4SPBC188 | DP0056 | DP0028","price":868.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198753509.jpg?v=1713420038"},{"product_id":"xdp-mechanical-fuel-pump-block-off-plate-for-1989-2002-dodge-5-9l-cummins-xd469","title":"XDP Mechanical Fuel Pump Block-Off Plate For 1989-2002 Dodge 5.9L Cummins","description":"\u003cp\u003eThe XDP Mechanical Fuel Pump Block-Off Plate XD469 will add a custom look under the hood while blocking off the unsightly hole on the side of the engine block in your Dodge 5.9L Cummins. This block-off plate features a billet aluminum construction with a built-in o-ring gasket to ensure a perfect fit and a leak-free seal. Each plate comes coated in a black anodized finish and is ready for installation with the included mounting hardware and o-ring seal.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e Features: \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eSimple Installation\u003c\/li\u003e\n\n\u003cli\u003ePrecision CNC-Machined\u003c\/li\u003e\n\n\u003cli\u003eBillet Aluminum Construction\u003c\/li\u003e\n\n\u003cli\u003eBlack Anodized Finish For Long-Lasting Looks\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e Fitment: \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e1989-2002 DODGE 5.9L CUMMINS\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e Included: \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eXDP Mechanical Fuel Pump Block-Off Plate\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e Notes: \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":45078775955613,"sku":"XD469","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198806476.jpg?v=1713430266"},{"product_id":"fleece-fuel-system-upgrade-with-powerflo-lift-pump-for-1991-1997-dodge-cummins","title":"Fleece Fuel System Upgrade with PowerFlo Lift Pump For 1991-1997 Dodge Cummins","description":"\u003cdiv class=\"b-desc\"\u003e\n\n\u003cp\u003eOnly from Fleece, a complete fuel supply upgrade kit for your 1991-1997 Dodge Cummins. Includes a new sending unit and float to get your fuel gauge working again! The PowerFlo Lift Pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance. The PowerFlo is the only in-tank lift pump capable of supporting up to 800 hp!\u003c\/p\u003e\n\n\u003cp\u003eThe PowerFlo Lift Pump requires no drilling, cutting, or sumps to cut into your fuel tank and installs in less than half the time of other high flow lift pumps. Two is always better than one, and the PowerFlo delivers with two OEM quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, and the ¼ tank issues typically encountered when seeking a higher flow lift pump to meet your engine’s need.\u003c\/p\u003e\n\n\u003cp\u003e IMPORTANT - Verify your existing MOPAR sending unit part number is listed in the table below. If your part number is not shown, then it is not verified to fit. Many trucks have been retrofitted over time to gasoline model tanks and the SureFlo will not fit into a retrofitted tank configuration. For Model Year 1998 trucks equipped with a 12 valve engine - your vehicle will require our 1998 12-valve specific kit (Part Number FPE-PF-CUMM-98-12V) . These trucks would have been originally equipped with sending unit part number 52102079AB.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect OEM In-Tank Fitmen\u003c\/li\u003e\n\n\u003cli\u003eDual Gerotor\u003c\/li\u003e\n\n\u003cli\u003eSeamless Integration\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e1991-1997 Dodge 5.9L Cummins\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePowerFlo Lift Pump with integral fuel sender\u003c\/li\u003e\n\n\u003cli\u003e16' of push lock hose and all necessary AN fittings\u003c\/li\u003e\n\n\u003cli\u003eMechanical fuel pump block off plate (FPE-CUMM-FBOP)\u003c\/li\u003e\n\n\u003cli\u003eWiring harness and fuse taps\u003c\/li\u003e\n\n\u003cli\u003eFlange tank seal\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":45164719538333,"sku":"FPE-PF-CUMM-9197","price":889.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198830679.png?v=1715218389"},{"product_id":"airdog-ii-5g-165-gph-fuel-pump-sump-kit-for-1989-1993-dodge-ram-5-9l-cummins","title":"AirDog II 5G 165 GPH Fuel Pump \u0026 Sump Kit For 1989-1993 Dodge Ram 5.9L Cummins","description":"\u003cp\u003eThis is the AirDog® II-5G DF-165-5G fuel system for the 1989-1993 Dodge Ram 12V VE-44 5.9L Cummins. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. A Fuel Module Upgrade Kit is installed in the factory fuel basket to pull fuel through a factory-style 1\/2\" bulkhead fitting. The pressure side connects directly into the side of the injection pump, bypassing the factory fuel filter housing and factory mechanical fuel pump. The AirDog® Air\/Vapor return is sent back to the tank through the factory 3\/8” suction line once the module is modified. This is a 165GPH (Gallon Per Hour) lift pump system for moderately modified trucks. Check out our installation manual for a list of parts that are included with this kit.\u003c\/p\u003e\n\u003cp\u003eThe PureFlow AirDog® universal fuel sump helps aid aftermarket fuel systems by utilizing gravity to pull fuel from the tank. Our redesigned sump has both a suction and return port! We integrated a dual o-ring seal to prevent leaks! The installation of our fuel sump eliminates the common 1\/4 tank suction issue associated with a draw straw-style fuel pickup. This sump is manufactured in America using corrosion resistant components. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFuel System Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarger Ports Over Previous Pumps\u003c\/li\u003e\n\u003cli\u003eIncreases Engine Efficiency\u003c\/li\u003e\n\u003cli\u003eProvides Better Fuel Flow At Pressure\u003c\/li\u003e\n\u003cli\u003eReliable \u0026amp; Quiet 5G Technology\u003c\/li\u003e\n\u003cli\u003e12-Gauge Wiring Harness \u003c\/li\u003e\n\u003cli\u003eLow Flow Return For Reduce Aeration\u003c\/li\u003e\n\u003cli\u003eIntegrated Diaphragm Fuel Pressure Regulator \u003c\/li\u003e\n\u003cli\u003eDemand Flow Design\u003c\/li\u003e\n\u003cli\u003e165 GPH Fuel Pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSump Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCan be Installed Without Dropping the Fuel Tank\u003c\/li\u003e\n\u003cli\u003eEliminate 1\/4 Tank Problems\u003c\/li\u003e\n\u003cli\u003eFeed and Return Port\u003c\/li\u003e\n\u003cli\u003eUses Corrosion Resistant Components\u003c\/li\u003e\n\u003cli\u003eInstallation Takes Less Than an Hour \u003c\/li\u003e\n\u003cli\u003eDual O-Ring Seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1989-1993 Dodge Ram 12V VE-44 5.9L Cummins \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) AirDog II 5G 165 GPH Fuel System \u003c\/li\u003e\n\u003cli\u003e(1) AirDog Fuel Sump \u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eNot For Sale Or Street Use In California\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":46965357740189,"sku":"A7SABD540 | AD09SMP","price":1086.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1.6_c7b61af0-f19d-4146-9ef3-c07d76a22926.png?v=1750951548"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/collections\/F198709924.png?v=1790660959","url":"https:\/\/rudysdiesel.com\/collections\/1989-1993-5-9l-12v-cummins-lift-pumps-fuel-pumps-fuel-system.oembed","provider":"Rudy's Performance Parts","version":"1.0","type":"link"}