{"title":"1994-1998 7.3L Powerstroke Lift Pumps, Fuel Pumps \u0026 Fuel System","description":null,"products":[{"product_id":"aeromotive-130gph-fuel-pump-pump-only-11802","title":"Aeromotive 130GPH Fuel Pump (Pump Only)","description":"\u003cp\u003eThe Aeromotive 11802 Fuel Pump offers a true solution to Duramax, Cummins and Powerstroke owners looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel Pump addresses the common failure points and issues that have plagued the market for years.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFiltration:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1\"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eShaft Seals \u0026amp; Pump Design:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eLike all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eExtreme Climates:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAeromotive understands that some need their trucks in harsh environments. For the extreme cold, the Aeromotive 11802 features (2) 8-AN ports to allow engine coolant to warm the pump body. In addition, the pump is a completely sealed unit allowing it to get wet or be submerged without skipping a beat.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFuel Pressure:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. The 11802 also comes standard with a pump mounted gauge so you can refine your pressure tuning without having to guess.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e||||\u003cul\u003e\n\u003cli\u003e130 GPH @ 10 PSI\u003c\/li\u003e\n\u003cli\u003ePump Only (No Installation Kit)\u003c\/li\u003e\n\u003cli\u003eIdeal For Custom Applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e Quick-Connect fittings shown installed in pump are for display only. Pump fittings and installation kit are not included. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073138581661,"sku":"11802","price":1414.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662903.jpg?v=1713403400"},{"product_id":"aeromotive-230gph-fuel-pump-pump-only-11806","title":"Aeromotive 230GPH Fuel Pump (Pump Only)","description":"\u003cp\u003eThe Aeromotive 11806 Fuel Pump offers a true solution to Duramax, Cummins and Powerstroke owners looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel Pump addresses the common failure points and issues that have plagued the market for years.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFiltration:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1\"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eShaft Seals \u0026amp; Pump Design:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eLike all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFuel Pressure:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRace Pump \u003c\/li\u003e\n\u003cli\u003e230 GPH @ 10 PSI \u003c\/li\u003e\n\u003cli\u003ePump Only (No Installation Kit)\u003c\/li\u003e\n\u003cli\u003eIdeal For Custom Applications \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e Quick-Connect fittings shown installed in pump are for display only. Pump fittings and installation kit are not included. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073139171485,"sku":"11806","price":1760.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662912.jpg?v=1713403413"},{"product_id":"aeromotive-5-8-pickup-1-2-return-kit","title":"Aeromotive 5\/8\" Pickup \u0026 1\/2\" Return Kit","description":"\u003cp\u003e\n\u003c\/p\u003e\u003cp\u003eThe Aeromotive 11805 5\/8\" Pickup \u0026amp; 1\/2\" Return Kit provides you with the necessary plumbing components for installing the Aeromotive 11802 Fuel Pump on your truck. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073139237021,"sku":"11805","price":490.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662911.jpg?v=1713403415"},{"product_id":"alliant-power-mechanical-fuel-transfer-pump-for-94-98-7-3l-powerstroke-apm61067","title":"Alliant Power Mechanical Fuel Transfer Pump For 94-98 7.3L Powerstroke","description":"\u003cp\u003e\u003cstrong\u003eAlliant Power Mechanical Fuel Transfer Pump For 1994-1998 Ford 7.3L Powerstroke\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes two banjo gaskets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eOEM Part Numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"field-item even\"\u003e1824415C93\u003c\/li\u003e\n\u003cli class=\"field-item odd\"\u003e1826794C93\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alliant Power","offers":[{"title":"Default Title","offer_id":45074570870941,"sku":"APM61067","price":206.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/APM61067_1.jpg?v=1784816536"},{"product_id":"airdog-150-gph-lift-pump-fuel-bowl-bypass-sump-for-2001-2010-gm-6-6l-duramax-a4spbc188-dp0056-dp0028","title":"AirDog 150 GPH Lift Pump\/Fuel Bowl Bypass\/Sump For 2001-2010 GM 6.6L Duramax","description":"\u003cp\u003eThe PureFlow AirDog 150GPH Air\/Fuel Separation System for your 2001-2010 GM 6.6L Duramax provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel. The AirDog is lift pump and filter system, that enhances the fuel delivery to your engine with a commercial duty system.\u003c\/p\u003e\n\n\u003cp\u003eYour High Performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air\/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air\/vapor can cause galling and pitting of the injector barrel\/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time!\u003c\/p\u003e\n\n\u003cp\u003eThe Airdog works by pulling fuel from the fuel tank containing entrained air\/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air\/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air\/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation.\u003c\/p\u003e\n\n\u003cp\u003eThe Rudy's Duramax Fuel Filter Delete for your 2001-2016 GM 6.6L Duramax is for use after the installation of an AirDog or FASS Fuel Air Separation System. Once installed the factory fuel filter is no longer needed and can be easily removed by using this factory fuel filter canister delete. Because your Duramax fuel filter is located after the AirDog or FASS filtration system you will still need to replace the factory filter every 5,000-8,000 miles. This filter delete kit will replace your now useless fuel filter with a spin on canister that will allow fuel to flow freely into the engine, saving you even more money. This spin on fuel filter delete kit is a perfect addition to your AirDog or FASS Titanium diesel fuel pump and comes with all required hardware for a professional installation.\u003c\/p\u003e\n\n\u003cp\u003eFuel Sumps are nothing new these days, you see them everywhere and every company seems to have one. What we have done is step the tank sump up a notch. Made from 6061 Billet aluminum this sump is built like a tank and is super simple to install. While still using a no-tank drop design we have made this sump to where it will install with 1 single bolt with one single 3\" hole in your tank. This means less places to leak and much quicker install.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eSmall \u0026amp; Compact\u003c\/li\u003e\n\n\u003cli\u003eDual Feed Gerotor Pump\u003c\/li\u003e\n\n\u003cli\u003eLow Amperage Motor for Efficiency and Endurance\u003c\/li\u003e\n\n\u003cli\u003eSelf-aligning Motor for Less Maintenance \u0026amp; Less Noise\u003c\/li\u003e\n\n\u003cli\u003eIntermediate Pump Shaft to Separate the Motor from Fuel\u003c\/li\u003e\n\n\u003cli\u003eQuick Connect Components\u003c\/li\u003e\n\n\u003cli\u003eFlow Rate of 150 GPH\u003c\/li\u003e\n\n\u003cli\u003eMounts to Frame\u003c\/li\u003e\n\n\u003cli\u003eRetains WIF (Water In Fuel) Sensor\u003c\/li\u003e\n\n\u003cli\u003eInstalls In Place Of Stock Filter\u003c\/li\u003e\n\n\u003cli\u003eAllows For Unrestricted Fuel Flow To Engine\u003c\/li\u003e\n\n\u003cli\u003eBuilt-In Drain Plug\u003c\/li\u003e\n\n\u003cli\u003eDual O-Ring Design\u003c\/li\u003e\n\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2001-2010 Chevrolet Silverado 2500HD\/3500HD 6.6L Duramax LB7\/LLY\/LBZ\/LMM\u003c\/li\u003e\n\n\u003cli\u003e2001-2010 GMC Sierra 2500HD\/3500HD 6.6L Duramax LB7\/LLY\/LBZ\/LMM\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAirdog comes with Limited Lifetime Warranty, when registered properly\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45076116504733,"sku":"A4SPBC188 | DP0056 | DP0028","price":868.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198753509.jpg?v=1713420038"},{"product_id":"driven-diesel-complete-electric-fuel-system-for-1994-1997-ford-7-3l-powerstroke-dd-73fs-obsfs-1p-v2","title":"Driven Diesel Complete Electric Fuel System For 1994-1997 Ford 7.3L Powerstroke","description":"\u003cdiv class=\"full_description\"\u003eThis Driven Diesel OBS Electric Fuel System Conversion kit for the 94-97 \"OBS\" 7.3L Powerstroke trucks is truly a COMPLETE fuel system solution. This package includes our proven OBS Regulated Return Kit along with the necessary electric fuel pump, fuel filters, hose, fittings and all necessary hardware...for a total \"tank to engine\" electric fuel system package. Fuel delivery is handled by the nearly bulletproof OEM Bosch fuel pump from the 99-03 Super Duty trucks, providing you with stellar reliability and enough fuel to supply up to about a 180cc injector (350-375hp). The result is a much more consistent fuel flow\/pressure delivered to the injectors, a primed fuel system BEFORE starting the engine, support for moderately upgraded power levels as well as filters that are easier to service and less expensive to replace!\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eCompatible with Both Stock and Aftermarket Turbochargers\u003c\/li\u003e\n\n\u003cli\u003eCompatible with \"Terminator\" Twin HPOP Setups\u003c\/li\u003e\n\n\u003cli\u003eOPTIONAL Driven Diesel S.S. High Flow Banjo Bolt Kit - RECOMMENDED Made in the USA\u003c\/li\u003e\n\n\u003cli\u003eAll Kits Feed Front Ports (away from Turbo Heat) and Return from Rear Ports\u003c\/li\u003e\n\n\u003cli\u003eCan be Upgraded to \"Dual Stock Pump\" Setup at a later date (support for more HP)\u003c\/li\u003e\n\n\u003cli\u003eComplete Pump\/Filters Assembly is only 13\" Wide\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e1994-1997 Ford F250\/350 OBS 7.3L\u003c\/li\u003e\n\n\u003cli\u003e1994-1998 Ford E-SERIES VAN\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eHigh Quality Fuelab Bypass Fuel Pressure Regulator Made in the USA\u003c\/li\u003e\n\n\u003cli\u003e3\/8\" CNC Bent S.S. Hard Line Used in High Temperature and Tight Radius Locations Made in the USA\u003c\/li\u003e\n\n\u003cli\u003eHigh Quality 3\/8\" S.S. Braided Teflon Hoses with BLACK Protective Covering Made in the USA\u003c\/li\u003e\n\n\u003cli\u003eStainless Steel Regulator Mounting Bracket Made in the USA\u003c\/li\u003e\n\n\u003cli\u003eDriven Diesel Liquid Filled Fuel Pressure Gauge\u003c\/li\u003e\n\n\u003cli\u003eBosch Electric Fuel Pump (same pump as 99-03 Ford Super Duty)\u003c\/li\u003e\n\n\u003cli\u003eNew Driven Diesel Mounting Bracket Assembly (Improved Fit and Flexibility) Made in the USA\u003c\/li\u003e\n\n\u003cli\u003eNEW DRIVEN DIESEL Billet Pre \u0026amp; Post Pump Fuel Filter Heads Made in the USA\u003c\/li\u003e\n\n\u003cli\u003eBaldwin Pre \u0026amp; Post Pump Fuel Filter Elements Made in the USA\u003c\/li\u003e\n\n\u003cli\u003e20' of #6 Fuel Line and All Necessary Fittings\u003c\/li\u003e\n\n\u003cli\u003eDriven Diesel OBS Fuel Pump Wiring Harness w\/Pump Controller Made in the USA\u003c\/li\u003e\n\n\u003cli\u003eAll Necessary Hardware for Installation\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eThis kit RETAINS the fuel tank selector valve...you will still be able to use BOTH fuel tanks using the switch on the dash, like you always have\u003c\/li\u003e\n\n\u003cli\u003eWhile we have done everything we can to make this the most compact fuel pump and filter mount on the market at only 13\" wide, there are a few applications where the mount will not fit inside the frame. If your truck doesn't have enough space inside the frame, this kit CAN be used outside the frame \u003c\/li\u003e\n\n\u003cli\u003e94-98 E-SERIES VAN OWNERS: This kit may NOT be a direct bolt-in for the van. Some customers have modified our kit or their van to use this product. While we don't believe that the modifications are significant, we are not aware of the specifics of the modifications and we can NOT provide support for fitting this kit to an E-Series Van\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Driven Diesel","offers":[{"title":"Default Title","offer_id":45082207977629,"sku":"DD-73FS-OBSFS-1P-V2","price":1644.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198818852.jpg?v=1713435367"}],"url":"https:\/\/rudysdiesel.com\/collections\/1994-1998-7-3l-powerstroke-lift-pumps-fuel-pumps-fuel-system.oembed","provider":"Rudy's Performance Parts","version":"1.0","type":"link"}