{"title":"2006-2007 6.6L LBZ Duramax Fuel System Components","description":null,"products":[{"product_id":"aeromotive-130gph-fuel-pump-pump-only-11802","title":"Aeromotive 130GPH Fuel Pump (Pump Only)","description":"\u003cp\u003eThe Aeromotive 11802 Fuel Pump offers a true solution to Duramax, Cummins and Powerstroke owners looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel Pump addresses the common failure points and issues that have plagued the market for years.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFiltration:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1\"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eShaft Seals \u0026amp; Pump Design:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eLike all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eExtreme Climates:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAeromotive understands that some need their trucks in harsh environments. For the extreme cold, the Aeromotive 11802 features (2) 8-AN ports to allow engine coolant to warm the pump body. In addition, the pump is a completely sealed unit allowing it to get wet or be submerged without skipping a beat.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFuel Pressure:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. The 11802 also comes standard with a pump mounted gauge so you can refine your pressure tuning without having to guess.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e||||\u003cul\u003e\n\u003cli\u003e130 GPH @ 10 PSI\u003c\/li\u003e\n\u003cli\u003ePump Only (No Installation Kit)\u003c\/li\u003e\n\u003cli\u003eIdeal For Custom Applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e Quick-Connect fittings shown installed in pump are for display only. Pump fittings and installation kit are not included. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073138581661,"sku":"11802","price":1414.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662903.jpg?v=1713403400"},{"product_id":"aeromotive-135gph-fuel-pump-retro-fit-kit-for-1-2-lines-11803","title":"Aeromotive 135GPH Fuel Pump (Retro-Fit  Kit For 1\/2\" Lines)","description":"\u003cp\u003eThe Aeromotive 11803 Fuel System offers a true solution to any 2001-2010 GM 6.6L Duramax owner looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel System addresses the common failure points and issues that have plagued the market for years.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFiltration:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1\"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eShaft Seals \u0026amp; Pump Design:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eLike all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eExtreme Climates:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAeromotive understands that some need their trucks in harsh environments. For the extreme cold, the Aeromotive 11803 features (2) 8-AN ports to allow engine coolant to warm the pump body. In addition, the pump is a completely sealed unit allowing it to get wet or be submerged without skipping a beat.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInstallation:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAeromotive has worked hard to provide an easy installation for this fuel system. Featuring high-quality Delphi sealed weatherpack connectors, the plug and play wiring harness provides power to the pump with 10-gauge power and ground wires. Aeromotive includes a steel zinc-plated bracket, hoses, pickup tube and all the components needed to complete this installation on your Duramax pickup.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFuel Delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAeromotive has addressed the 1\/4 tank issues associated with aftermarket draw straws by including their patented and proven foam baffle technology borrowed from their Phantom systems. This baffle keeps fuel at the pickup point of the 3\/4\" draw straw and houses the 100 micron pre-filter and return line. By doing this, there is no need to drill a hole in the bottom of the tank or modify the filler neck.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFuel Pressure:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. The 11803 also comes standard with a pump mounted gauge so you can refine your pressure tuning without having to guess.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e||||\u003cul\u003e\n\u003cli\u003e135 GPH\u003c\/li\u003e\n\u003cli\u003eSelf-Priming\u003c\/li\u003e\n\u003cli\u003eRetro-Fit Kit, Replaces Existing Fuel Pump\u003c\/li\u003e\n\u003cli\u003eIn-Tank Baffle - Eliminates 1\/4 Tank Issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e The 11803 Retro-Fit Kit is for use in applications where your current aftermarket fuel system with 1\/2\" lines is being replaced with the Aeromotive pump. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073138811037,"sku":"11803","price":1819.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662906.jpg?v=1713403405"},{"product_id":"aeromotive-135gph-fuel-system-11801","title":"Aeromotive 135GPH Fuel System","description":"\u003cp\u003eThe Aeromotive 11801 Fuel System offers a true solution to any 2001-2010 GM 6.6L Duramax owner looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel System addresses the common failure points and issues that have plagued the market for years.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFiltration:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1\"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eShaft Seals \u0026amp; Pump Design:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eLike all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eExtreme Climates:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAeromotive understands that some need their trucks in harsh environments. For the extreme cold, the Aeromotive 11801 features (2) 8-AN ports to allow engine coolant to warm the pump body. In addition, the pump is a completely sealed unit allowing it to get wet or be submerged without skipping a beat.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInstallation:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAeromotive has worked hard to provide an easy installation for this fuel system. Featuring high-quality Delphi sealed weatherpack connectors, the plug and play wiring harness provides power to the pump with 10-gauge power and ground wires. Aeromotive includes a steel zinc-plated bracket, hoses, pickup tube and all the components needed to complete this installation on your Duramax pickup.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFuel Delivery:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAeromotive has addressed the 1\/4 tank issues associated with aftermarket draw straws by including their patented and proven foam baffle technology borrowed from their Phantom systems. This baffle keeps fuel at the pickup point of the 3\/4\" draw straw and houses the 100 micron pre-filter and return line. By doing this, there is no need to drill a hole in the bottom of the tank or modify the filler neck.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFuel Pressure:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. The 11801 also comes standard with a pump mounted gauge so you can refine your pressure tuning without having to guess.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e135 GPH\u003c\/li\u003e\n\u003cli\u003eSelf-Priming\u003c\/li\u003e\n\u003cli\u003eQuick-Disconnect Fittings\u003c\/li\u003e\n\u003cli\u003eComplete Bolt-On \u0026amp; Plug-In Installation\u003c\/li\u003e\n\u003cli\u003eIn-Tank Baffle - Eliminates 1\/4 Tank Issues\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073138843805,"sku":"AER11801","price":2412.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662899.jpg?v=1713403405"},{"product_id":"aeromotive-230gph-fuel-pump-pump-only-11806","title":"Aeromotive 230GPH Fuel Pump (Pump Only)","description":"\u003cp\u003eThe Aeromotive 11806 Fuel Pump offers a true solution to Duramax, Cummins and Powerstroke owners looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel Pump addresses the common failure points and issues that have plagued the market for years.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFiltration:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1\"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eShaft Seals \u0026amp; Pump Design:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eLike all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFuel Pressure:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRace Pump \u003c\/li\u003e\n\u003cli\u003e230 GPH @ 10 PSI \u003c\/li\u003e\n\u003cli\u003ePump Only (No Installation Kit)\u003c\/li\u003e\n\u003cli\u003eIdeal For Custom Applications \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e Quick-Connect fittings shown installed in pump are for display only. Pump fittings and installation kit are not included. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073139171485,"sku":"11806","price":1760.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662912.jpg?v=1713403413"},{"product_id":"aeromotive-5-8-pickup-1-2-return-kit","title":"Aeromotive 5\/8\" Pickup \u0026 1\/2\" Return Kit","description":"\u003cp\u003e\n\u003c\/p\u003e\u003cp\u003eThe Aeromotive 11805 5\/8\" Pickup \u0026amp; 1\/2\" Return Kit provides you with the necessary plumbing components for installing the Aeromotive 11802 Fuel Pump on your truck. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073139237021,"sku":"11805","price":490.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662911.jpg?v=1713403415"},{"product_id":"aeromotive-fuel-line-wiring-kit","title":"Aeromotive Fuel Line \u0026 Wiring Kit","description":"\u003cp\u003eThe Aeromotive 11804 Fuel Line \u0026amp; Wiring Kit provides you with the needed components to install the Aeromotive Fuel System on your 2001-2010 GM 6.6L Duramax. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073139302557,"sku":"11804","price":346.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662910.jpg?v=1713403416"},{"product_id":"airdog-100-gph-fuel-lift-pump-for-01-10-6-6l-duramax-a4spbc185","title":"AirDog 100 GPH Fuel Lift Pump For 01-10 6.6L Duramax","description":"\u003cp\u003e\u003cstrong\u003eAirDog 100 GPH Fuel Lift Pump For 2001-2010 Chevy\/GMC 6.6L Duramax\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003eThis is the AirDog I FP-100 fuel system for the 2001-2010 Chevy\/GMC Duramax 6.6L. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. This system utilizes the factory suction port in the fuel module for suction and plugs into the factory fuel line on the pressure side to supply fuel to the CP3 injection pump. The return is sent back to the tank through a filler neck tee. This is one of the easiest fuel systems to install. This is a 100GPH (Gallon Per Hour) lift pump system.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAirDog 100 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePreset @ 8-10 PSI\u003c\/li\u003e\n\n\u003cli\u003eFlows 100 Gallons Per Hour\u003c\/li\u003e\n\n\u003cli\u003eSupports Stock-500HP Applications\u003c\/li\u003e\n\n\u003cli\u003eSmoother Idle \u0026amp; Acceleration\u003c\/li\u003e\n\n\u003cli\u003eImproved Throttle Response\u003c\/li\u003e\n\n\u003cli\u003eCARB E.O. Number D-595-3\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/ujokaEkF8Z0\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Pictures of the Fuel System may vary. Please refer to the listing title and product description for correct Fuel System.\u003c\/p\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073142612125,"sku":"A4SPBC185","price":738.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198709489.png?v=1713403492"},{"product_id":"airdog-raptor-4g-100-gph-fuel-lift-pump-for-01-10-6-6l-duramax-r4sbc133","title":"AirDog Raptor 4G 100 GPH Fuel Lift Pump For 01-10 6.6L Duramax","description":"\u003cp\u003e\u003cstrong\u003eAirDog Raptor 4G 100 GPH Fuel Lift Pump For 2001-2010 Chevy\/GMC 6.6L Duramax  \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003eThis is the Raptor-4G RP-100 fuel system for the 2001-2010 6.6L Duramax. This system mounts to the frame rail using the supplied sandwich plate mounting system. The suction line connects to the factory suction fitting on top of the fuel module. The pressure side connects to the factory injection pump feed line on the frame back by the fuel cooler. These pumps are internally regulated and do not require a return line. This is a 100GPH (Gallon Per Hour) fuel system for stock fuel trucks.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAirDog Raptor 4G 100 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePreset @ 8-10 PSI\u003c\/li\u003e\n\n\u003cli\u003eFlows 100 Gallons Per Hour\u003c\/li\u003e\n\n\u003cli\u003eNo Return Line Needed\u003c\/li\u003e\n\n\u003cli\u003e4G Technology\u003c\/li\u003e\n\n\u003cli\u003eSmoother Idle \u0026amp; Acceleration\u003c\/li\u003e\n\n\u003cli\u003eGerotor Pump Design\u003c\/li\u003e\n\n\u003cli\u003eImproved Throttle Response\u003c\/li\u003e\n\n\u003cli\u003eCARB E.O. Number D-595-3\u003c\/li\u003e\n\n\u003c\/ul\u003emulch spreader\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Pictures of the Fuel System may vary. Please refer to the listing title and product description for correct Fuel System.\u003c\/p\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073146183837,"sku":"R4SBC133","price":491.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198709864.png?v=1713403543"},{"product_id":"airdog-150-gph-fuel-lift-pump-for-01-10-6-6l-duramax-a4spbc188","title":"AirDog 150 GPH Fuel Lift Pump For 01-10 6.6L Duramax","description":"\u003cp\u003e\u003cstrong\u003eAirDog 150 GPH Fuel Lift Pump For 2001-2010 Chevy\/GMC 6.6L Duramax\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003eThis is the AirDog I FP-150 fuel system for the 2001-2010 Chevy\/GMC Duramax 6.6L. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system.A 1\/2\" draw straw is used to pull fuel from the tank. The supply side is hooked up to the factory fuel line feeding the CP3 injection pump. The return is sent back to the tank through a filler neck tee. This is a 150GPH (Gallon Per Hour) lift pump system.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAirDog 150 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePreset @ 8-10 PSI\u003c\/li\u003e\n\n\u003cli\u003eFlows 150 Gallons Per Hour\u003c\/li\u003e\n\n\u003cli\u003eSupports Stock-500HP Applications\u003c\/li\u003e\n\n\u003cli\u003eSmoother Idle \u0026amp; Acceleration\u003c\/li\u003e\n\n\u003cli\u003eImproved Throttle Response\u003c\/li\u003e\n\n\u003cli\u003eCARB E.O. Number D-595-3\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cdiv class=\"iframe-wrap embed-responsive embed-responsive-16by9\"\u003e\n\n\u003cdiv class=\"iframe-wrap embed-responsive embed-responsive-16by9\"\u003e\u003ciframe class=\"embed-responsive-item\" src=\"https:\/\/www.youtube.com\/embed\/ujokaEkF8Z0\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\" data-mce-fragment=\"1\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Pictures of the Fuel System may vary. Please refer to the listing title and product description for correct Fuel System.\u003c\/p\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073149296797,"sku":"A4SPBC188","price":761.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198709504.png?v=1713403585"},{"product_id":"airdog-raptor-4g-150-gph-fuel-lift-pump-for-01-10-6-6l-duramax-r4sbc136","title":"AirDog Raptor 4G 150 GPH Fuel Lift Pump For 01-10 6.6L Duramax","description":"\u003cp\u003e\u003cstrong\u003eAirDog Raptor 4G 150 GPH Fuel Lift Pump For 2001-2010 Chevy\/GMC 6.6L Duramax\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003eThis is the Raptor-4G RP-150 fuel system for the 2001-2010 6.6L Duramax. This system mounts to the frame rail using the supplied sandwich plate mounting system. The suction line connects to the factory suction fitting on top of the fuel module. The pressure side connects to the factory injection pump feed line on the frame back by the fuel cooler. These pumps are internally regulated and do not require a return line. This is a 150GPH (Gallon Per Hour) fuel system for moderately modified trucks.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAirDog Raptor 4G 150 Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePreset @ 8-10 PSI\u003c\/li\u003e\n\n\u003cli\u003eFlows 150 Gallons Per Hour\u003c\/li\u003e\n\n\u003cli\u003eNo Return Line Needed\u003c\/li\u003e\n\n\u003cli\u003e4G Technology\u003c\/li\u003e\n\n\u003cli\u003eSmoother Idle \u0026amp; Acceleration\u003c\/li\u003e\n\n\u003cli\u003eGerotor Pump Design\u003c\/li\u003e\n\n\u003cli\u003eImproved Throttle Response\u003c\/li\u003e\n\n\u003cli\u003eCARB E.O. Number D-595-3\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Pictures of the Fuel System may vary. Please refer to the listing title and product description for correct Fuel System.\u003c\/p\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073150345373,"sku":"R4SBC136","price":503.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198709876.png?v=1713403611"},{"product_id":"airdog-fuel-filter-2-micron-replacement-water-separator","title":"AirDog Fuel Filter (2 Micron) \u0026 Replacement Water Separator","description":"\u003cp\u003e\n\n\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cbr\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits All AirDog \u0026amp; AirDog II Kits \u003c\/li\u003e\n\u003cli\u003eGenuine AirDog Replacement \u003c\/li\u003e\n\u003cli\u003e2 Micron Filtration Rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cbr\u003eThe AirDog Replacement Water Separator WS100 is a direct replacement for your AirDog Fuel System. The built-in drain allows you to empty any water from the filter during routine maintenance. The life expectancy for the Airdog Water Separator could be up to 25K miles or a year. However, those figures can change drastically depending on fuel quality. Order a few extra and keep them in your cab or toolbox. \u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits All AirDog \u0026amp; AirDog II Kits \u003c\/li\u003e\n\u003cli\u003eGenuine AirDog Replacement \u003c\/li\u003e\n\u003cli\u003eReplaces Part# WS80\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAirDog FF100-2 \u0026amp; WS100\u003c\/p\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073151819933,"sku":"FF100-2-WS100","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198666722.jpg?v=1713403655"},{"product_id":"airdog-replacement-10-micron-fuel-filter","title":"AirDog Replacement 10 Micron Fuel Filter","description":"\u003cp\u003e\u003cstrong\u003eAirDog Replacement 10 Micron Fuel Filter\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThis is the 10 micron fuel filter that is a direct fit for all AirDog I, AirDog II, and AirDog II-4G models.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCross Reference Numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNAPA: 3420\u003c\/li\u003e\n\n\u003cli\u003eWIX: 33420\u003c\/li\u003e\n\n\u003cli\u003eBaldwin: BF-7531\u003c\/li\u003e\n\n\u003cli\u003eFleetguard: 5613\u003c\/li\u003e\n\n\u003cli\u003eDonaldson: P551315\u003c\/li\u003e\n\n\u003cli\u003eLuberFiner: LFF3545\u003c\/li\u003e\n\n\u003cli\u003eNote, this is for fitment and not micron rating.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073152606365,"sku":"FF100-10","price":32.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198717858.jpg?v=1713403667"},{"product_id":"airdog-replacement-water-separator","title":"AirDog Replacement Water Separator","description":"\u003cp\u003e\u003cstrong\u003eAirDog Replacement Water Separator\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThis is the water separator  that is a direct fit for all AirDog I, AirDog II, and AirDog II-4G models.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCross Reference Numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNAPA: 3616\u003c\/li\u003e\n\n\u003cli\u003eWIX: 33616\u003c\/li\u003e\n\n\u003cli\u003eBaldwin: BF-1275\u003c\/li\u003e\n\n\u003cli\u003eFleetguard: FS19768\u003c\/li\u003e\n\n\u003cli\u003eDonaldson: P550550\u003c\/li\u003e\n\n\u003cli\u003eLuberFiner: LFF9594\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073152802973,"sku":"WS100","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198717856.jpg?v=1713403673"},{"product_id":"bean-machine-multi-function-fuel-tank-sump-280002","title":"Bean Machine Multi Function Fuel Tank Sump","description":"\u003cp\u003e\u003cstrong\u003eNew and Improved Multi-Function Fuel Sump Design\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Beans Diesel Bean Machine Multi-Function Fuel Sump takes the proven single-hole sump design to the next level. Constructed from billet 6061 aluminum, this heavy-duty sump provides improved fuel delivery, simple installation, and versatile plumbing options for a wide range of aftermarket fuel systems.\u003c\/p\u003e\n\n\u003cp\u003eInstallation requires only a single 3\" hole and one mounting bolt, eliminating the need to remove the fuel tank while minimizing potential leak points.\u003c\/p\u003e\n\n\u003ch3\u003eMultiple Configuration Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eSupply and return configuration\u003c\/li\u003e\n\u003cli\u003eSingle outlet operation\u003c\/li\u003e\n\u003cli\u003eDual outlet setup for high-horsepower applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eEliminates common quarter-tank fuel starvation issues\u003c\/li\u003e\n\u003cli\u003eProvides access to nearly all available fuel in the tank\u003c\/li\u003e\n\u003cli\u003eReduces fuel pump strain and operating noise\u003c\/li\u003e\n\u003cli\u003eNo tank removal required during installation\u003c\/li\u003e\n\u003cli\u003eImproves fuel flow for high-output lift pump systems\u003c\/li\u003e\n\u003cli\u003eCompatible with many aftermarket fuel systems, including FASS and AirDog\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eBillet 6061 aluminum construction\u003c\/li\u003e\n\u003cli\u003eOriginal single-hole sump design\u003c\/li\u003e\n\u003cli\u003eSingle-bolt installation for reduced leak potential\u003c\/li\u003e\n\u003cli\u003eRequires only one 3\" hole in the fuel tank\u003c\/li\u003e\n\u003cli\u003eIntegrated sediment bowl helps reduce debris pickup\u003c\/li\u003e\n\u003cli\u003eExclusive O-ring sealing design for leak-free operation\u003c\/li\u003e\n\u003cli\u003eUses ORB fittings instead of pipe-thread fittings\u003c\/li\u003e\n\u003cli\u003eHigh-flow quick-disconnect and push-lock compatible fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel drain plug for future servicing\u003c\/li\u003e\n\u003cli\u003eInner ring design eliminates the need to drop the tank\u003c\/li\u003e\n\u003cli\u003eCompatible with metal and plastic fuel tanks\u003c\/li\u003e\n\u003cli\u003eWorks with gasoline and diesel applications\u003c\/li\u003e\n\u003cli\u003eRequires a minimum 4\" flat mounting area\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in Woodbury, Tennessee, USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Advantages\u003c\/h3\u003e\n\n\u003cp\u003eUnlike traditional draw-straw systems, the Bean Machine Fuel Sump draws fuel directly from the bottom of the tank. This helps reduce restrictions, lower fuel pump noise, and prevent low-fuel starvation issues commonly experienced with top-mounted pickup systems.\u003c\/p\u003e\n\n\u003cp\u003eThe single-hole design also eliminates the need to lower the fuel tank, reducing installation time and simplifying aftermarket fuel system upgrades.\u003c\/p\u003e\n\n\u003ch3\u003eKit Includes\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eSump body\u003c\/li\u003e\n\u003cli\u003eSump \"Pacman\" in-tank backer ring\u003c\/li\u003e\n\u003cli\u003e3\" hole saw\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting bolt\u003c\/li\u003e\n\u003cli\u003eSealing washer\u003c\/li\u003e\n\u003cli\u003eO-ring\u003c\/li\u003e\n\u003cli\u003e(2) -8 ORB to 1\/2\" QDC\/push-lock fittings with O-rings\u003c\/li\u003e\n\u003cli\u003e(1) -8 ORB plug for single-outlet operation\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT stainless steel drain plug fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBuilt for Real-World Durability\u003c\/h3\u003e\n\n\u003cp\u003eThe Bean Machine Fuel Sump has been tested in demanding conditions including towing, off-road use, and severe-duty environments. Its billet construction and proven sealing design deliver reliable performance in both daily-driven and high-performance applications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWatch the durability torture test:\u003c\/strong\u003e\u003cbr\u003e\n\u003ca href=\"https:\/\/www.youtube.com\/watch?v=n_GaBRX6SMY\" target=\"_blank\" rel=\"noopener\"\u003eBeans Diesel Sump Torture Test Video\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWatch the bubble demonstration video:\u003c\/strong\u003e\u003cbr\u003e\n\u003ca href=\"https:\/\/www.youtube.com\/watch?v=_9GbXYBftVA\u0026amp;t=2s\" target=\"_blank\" rel=\"noopener\"\u003eMulti-Function Sump Bubble Test Video\u003c\/a\u003e\u003c\/p\u003e","brand":"Beans Diesel","offers":[{"title":"Default Title","offer_id":45073159520413,"sku":"280002","price":157.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198706723.jpg?v=1713403814"},{"product_id":"fleece-performance-modified-cp3-injection-pump-for-01-10-6-6-duramax","title":"Fleece Performance Modified CP3 Injection Pump For 01-10 6.6 Duramax","description":"\u003cp\u003eThe Fleece Performance FPE-DMAX-CP3K is a modified Duramax LBZ CP3 designed to eliminate the factory fuel flow restriction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This cost effective upgrade will allow you to maintain desired fuel rail pressure through your entire RPM range.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEliminates Factory Fuel Flow Restriction\u003c\/li\u003e\n\u003cli\u003eMaintains Rail Pressure Through Entire RPM Range \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e The FPR Table must be rescaled when being used on LB7\/LLY Trucks. This can be done through custom tuning.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eCA Residents: \u003c\/b\u003eNot legal for sale or use in California on pollution controlled motor vehicles.\u003cbr\u003e\u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":45073197858973,"sku":"FPE-DMAX-CP3K","price":1349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198666759.jpg?v=1713404221"},{"product_id":"rudys-dual-o-ring-fuel-tank-sump-kit-w-holesaw-dp0028","title":"Rudy's Dual O-Ring Fuel Tank Sump Kit w\/ Holesaw","description":"\u003cp\u003eFuel Sumps are nothing new these days, you see them everywhere and every company seems to have one. What we have done is step the tank sump up a notch. Made from 6061 Billet aluminum this sump is built like a tank and is super simple to install. While still using a no-tank drop design we have made this sump to where it will install with 1 single bolt with one single 3\" hole in your tank. This means less places to leak and much quicker install.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eBuilt-In Drain Plug\u003c\/li\u003e\n\n\u003cli\u003eDual O-Ring Design\u003c\/li\u003e\n\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\n\u003cli\u003eLarge Opening for Unrestricted Fuel Flow\u003c\/li\u003e\n\n\u003cli\u003eWorks Great With Stock \u0026amp; Aftermarket Fuel Tanks\u003c\/li\u003e\n\n\u003cli\u003e1-Year Warranty\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eNot recommended for off-road applications or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling\u003c\/p\u003e","brand":"Rudy's","offers":[{"title":"Default Title","offer_id":45073511350429,"sku":"DP0028","price":47.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198666338.jpg?v=1713405089"},{"product_id":"rudys-fuel-tank-sump-kit-w-integrated-return-holesaw-dp0267","title":"Rudy's Fuel Tank Sump Kit w\/ Integrated Return \u0026 Holesaw","description":"\u003csection class=\"cmp-product-section cmp-product-description open animate--fade-in\" data-scroll=\"\"\u003e\n\u003cdiv class=\"cmp-product-section__inner\"\u003e\n\u003cdiv class=\"cmp-product-description__content\"\u003e\n\u003csection class=\"cmp-product-section cmp-product-description open animate--fade-in\" data-scroll=\"\"\u003e\n\u003cdiv class=\"cmp-product-section__inner\"\u003e\n\u003cdiv class=\"cmp-product-description__content\"\u003e\n\u003cp\u003eThe Rudy's Fuel Tank Sump with Built-In Fuel Return provides you with a perfect option to maximize fuel delivery, and customization when installing your aftermarket fuel system. Avoid the common 1\/4 tank issues associated with in-tank draw straws used with fuel systems such as AirDog, FASS and many others. The Rudy's sump features a one-hole design that only requires drilling a single hole for installation. A machined groove for the o-ring gasket ensures a leak-free seal, and the inner-ring is designed to fit into the bottom of the tank without requiring you to remove it from the truck. We even include a 3\" hole saw for drilling your tank! \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWhat sets this sump apart from the other sumps in the Rudy's lineup is the built-in return. Installation of most aftermarket fuel systems require you to cut and \"tee\" into your factory fuel filler neck. In some cases, modifications to the filler neck can cause leaks, and also cause fuel pumps to \"click off\" when refueling. Using the built-in return port, you can easily route return fuel back to the tank without having to modify any other components for a clean and easy installation. For optimal fuel quality, the Rudy's Sump features a stand pipe that places the returned fuel above the fuel feed. This design eliminates the possibility of feeding your engine the aerated return fuel coming back to your fuel tank. Includes barbed fittings for 1\/2\" hose. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-In Fuel Return \u003c\/li\u003e\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\u003cli\u003eStand Pipe Separates Return Fuel \u0026amp; Feed\u003c\/li\u003e\n\u003cli\u003e3\" Hole Saw Included For Easy Installation\u003c\/li\u003e\n\u003cli\u003eMade From Aircraft Grade T6 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eWorks Great With Stock \u0026amp; Aftermarket Fuel Tanks \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Not recommended for off-road s or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eUniversal - Cutting Required\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"cmp-product-section cmp-product-specification animate--fade-in\" data-scroll=\"\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"cmp-product-section cmp-product-specification animate--fade-in\" data-scroll=\"\"\u003e\u003c\/section\u003e","brand":"Rudy's","offers":[{"title":"Default Title","offer_id":45074701582493,"sku":"DP0267","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198713402.jpg?v=1713408921"},{"product_id":"ppe-universal-diesel-lift-pump-for-cummins-duramax-powerstroke","title":"PPE Universal Diesel Lift Pump For Cummins, Duramax \u0026 Powerstroke","description":"\u003cp\u003eThe PPE Diesel Lift Pump 113050000 is capable of pumping up to 160 gallons of fuel per hour! It's a key component to a reliable fuel system, rather than depending on the OEM CP3 to pull fuel from the tank, the PPE Diesel Fuel Lift Pump pushes fuel through the lines and filter. It eliminates the possibility of air being drawn into the system, and reduces stress on the factory CP3.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUp to 160 gallons per hour (GPH) fuel flow\u003c\/li\u003e\n\n\u003cli\u003eOperating pressure 4-8 PSI with engine idling\u003c\/li\u003e\n\n\u003cli\u003eHigh flow 1\/2 inch NPT inlet and outlet helps increase longevity of the stock CP3 pump\u003c\/li\u003e\n\n\u003cli\u003eCompatible with biodiesel, low and ultra low-sulfur diesel\u003c\/li\u003e\n\n\u003cli\u003eCARB E.O.# D-701-23\u003c\/li\u003e\n\n\u003cli\u003e1 year warranty\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePump\u003c\/li\u003e\n\n\u003cli\u003eMounting Bracket \u003c\/li\u003e\n\n\u003cli\u003eDual 12V Fuel Pump Relays\u003c\/li\u003e\n\n\u003cli\u003eWiring Diagram\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eApplication Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eHoses, fittings and additional components are not included.\u003c\/li\u003e\n\n\u003cli\u003eFor Powerstroke equipped Fords this pump must be used with a good working factory frame mounted pump.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"PPE","offers":[{"title":"Default Title","offer_id":45074750636189,"sku":"113050000","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198728450.jpg?v=1713409284"},{"product_id":"rudys-black-fuel-filter-bypass-for-01-16-gm-6-6l-duramax-lb7-lly-lbz-lmm-lml-dp0056-black","title":"Rudy's Black Fuel Filter Bypass For 01-16 GM 6.6L Duramax LB7 LLY LBZ LMM LML","description":"\u003cp\u003eThe Rudy's Duramax Fuel Filter Bypass for your 2001-2016 GM 6.6L Duramax is for use after the installation of an AirDog or FASS Fuel Air Separation System. Once installed the factory fuel filter is no longer needed and can be easily removed by using this factory fuel filter canister bypass. Because your Duramax fuel filter is located after the AirDog or FASS filtration system you will still need to replace the factory filter every 5,000-8,000 miles. This filter bypass kit will replace your now useless fuel filter with a spin on canister that will allow fuel to flow freely into the engine, saving you even more money. This spin on fuel filter bypass kit is a perfect addition to your AirDog or FASS Titanium diesel fuel pump and comes with all required hardware for a professional installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003cli\u003eInstalls In Place Of Stock Filter\u003c\/li\u003e\n\u003cli\u003eRetains WIF (Water In Fuel) Sensor\u003c\/li\u003e\n\u003cli\u003eAllows For Unrestricted Fuel Flow To Engine\u003c\/li\u003e\n\u003cli\u003eEliminates Costs Associated With Changing Stock Filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2001-2016 GMC Sierra 2500HD\/3500HD 6.6L LB7\/LLY\/LBZ\/LMM\/LML Duramax Diesel\u003c\/li\u003e\n\u003cli\u003e2001-2016 Chevrolet Silverado 2500HD\/3500HD 6.6L LB7\/LLY\/LBZ\/LMM\/LML Duramax Diesel\u003cstrong style=\"font-size: 0.875rem;\"\u003e \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect Replacement For 6.6L LB7\/LLY\/LBZ\/LMM\/LML Duramax Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Rudy's","offers":[{"title":"Default Title","offer_id":45074912149661,"sku":"DP0056-BLACK","price":59.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198715616.jpg?v=1713410429"},{"product_id":"bean-machine-micro-fuel-sump-280032","title":"Bean Machine Micro Fuel Sump","description":"\u003cp\u003eThe \u003cstrong\u003eBeans Diesel Bean Machine Micro Fuel Sump\u003c\/strong\u003e delivers the same proven performance and quality as the original Beans Diesel fuel sump in a more compact, budget-friendly design. Manufactured from billet 6061 aluminum, the Micro Sump features a simple one-bolt, one-hole installation that eliminates the need to drop the fuel tank.\u003c\/p\u003e\n\n\u003cp\u003eDesigned for use with aftermarket fuel systems such as FASS and AirDog, the Micro Sump improves fuel delivery, reduces pump strain, and helps eliminate common quarter-tank fuel starvation issues associated with traditional draw straw installations.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe Micro Sump can also be used as a fuel return.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eEliminates quarter-tank fuel starvation issues\u003c\/li\u003e\n\u003cli\u003eAllows use of nearly the entire fuel tank capacity\u003c\/li\u003e\n\u003cli\u003eReduces fuel pump strain and operating noise\u003c\/li\u003e\n\u003cli\u003eNo tank removal required for installation\u003c\/li\u003e\n\u003cli\u003eCompatible with high-flow lift pump systems\u003c\/li\u003e\n\u003cli\u003eSuitable for fuel supply or fuel return applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eMade from billet 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eSingle-bolt, single-hole installation design\u003c\/li\u003e\n\u003cli\u003eRequires only a 1-1\/2\" hole in the tank\u003c\/li\u003e\n\u003cli\u003eOne-piece machined billet construction\u003c\/li\u003e\n\u003cli\u003eExclusive no-leak O-ring sealing design\u003c\/li\u003e\n\u003cli\u003eStainless steel installation hardware included\u003c\/li\u003e\n\u003cli\u003eIntegrated standpipe helps reduce sediment pickup\u003c\/li\u003e\n\u003cli\u003eInner ring design eliminates the need to drop the fuel tank\u003c\/li\u003e\n\u003cli\u003eCompatible with metal or plastic fuel tanks\u003c\/li\u003e\n\u003cli\u003eRequires a minimum 3\" flat mounting area\u003c\/li\u003e\n\u003cli\u003eCompatible with gasoline or diesel applications\u003c\/li\u003e\n\u003cli\u003eInstalls in minutes\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Choose a Fuel Sump?\u003c\/h3\u003e\n\n\u003cp\u003eMany aftermarket fuel systems use draw straws that pull fuel from the top of the tank. These systems can experience fuel starvation below a quarter tank, increased pump noise, and restricted fuel flow.\u003c\/p\u003e\n\n\u003cp\u003eThe Bean Machine Micro Sump draws fuel directly from the bottom of the tank, improving fuel delivery while reducing pump strain and helping eliminate common low-fuel issues.\u003c\/p\u003e\n\n\u003ch3\u003eBuilt for Real-World Use\u003c\/h3\u003e\n\n\u003cp\u003eThe original Beans Diesel one-hole fuel sump design has been proven in daily-driven trucks, towing applications, off-road environments, and severe-duty conditions. Its billet construction and leak-resistant design provide long-term durability even in demanding environments.\u003c\/p\u003e\n\n\u003ch3\u003eKit Includes\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eMicro Sump body\u003c\/li\u003e\n\u003cli\u003eSump Pacman\u003c\/li\u003e\n\u003cli\u003eStainless steel bolt\u003c\/li\u003e\n\u003cli\u003eSealing washer\u003c\/li\u003e\n\u003cli\u003eO-ring\u003c\/li\u003e\n\u003cli\u003e8 ORB to 1\/2\" push-lock fitting with O-ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eRequires a 1-1\/2\" hole saw (not included)\u003c\/li\u003e\n\u003cli\u003eHole saw and tank drain are not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/n_GaBRX6SMY\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Beans Diesel","offers":[{"title":"Default Title","offer_id":45075058851997,"sku":"280032","price":79.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198719270.jpg?v=1713411562"},{"product_id":"bean-machine-universal-multi-function-fuel-tank-sump-kit-280003","title":"Bean Machine Universal Multi Function Fuel Tank Sump Kit","description":"\u003cp\u003e\u003cstrong\u003eBean Machine Universal Multi Function Fuel Tank Sump\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eWhat they have done at Beans Diesel\/Bean Machine is step up the tank sump another notch. Made from 6061 Billet aluminum, this guy is built like a tank and is super simple to install. Just like Beans original and revolutionary design, install is as easy as it gets, requiring a single 3\" hole and a single bolt. This means super easy and quick install time as well as minimal places to develop a leak. Bean's is not the only sump manufacturer on the market, but if you do purchase theirs you will be purchasing a 100% USA manufactured product from the company that invented the single hole design sump!\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eAll of Bean's tank sumps come with a 3\" hole saw and all the fittings you will need, (so no extra trips to the hardware store), as well as all stainless or aluminum hardware. The single O-ring design creates the perfect seal insuring you have zero leaks. Bean's manufacture the only tank sump on the market that uses O-ring Boss style fittings instead of a pipe thread style fitting. This means less possibility for leaks and a perfect seal. Their fittings can be used with a quick disconnect fitting (found on many aftermarket fuel systems) or 1\/2\" push-lock style fuel hose. That means it is going to be plug and play for the largest percentage of aftermarket fuel systems out there! They even include a plug if you only need a single outlet style sump.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUses all available fuel from the tank. No issues with sucking air when below 1\/8th of a tank. Perfect for use with today's high flow lift pump systems. (Airdog, FASS, etc)\u003c\/li\u003e\n\n\u003cli\u003eSediment bowl area machined inside of the sump to reduce the amount of sediments that get to your filter system.\u003c\/li\u003e\n\n\u003cli\u003eStainless Drain Plug for future tank servicing or sediment draining.\u003c\/li\u003e\n\n\u003cli\u003eSingle bolt design that allows for 5 minute install. A single bolt offers less chances for leaks than tanks sumps using multiple bolts drilled into the tank.\u003c\/li\u003e\n\n\u003cli\u003eStainless Steel hardware, High Flow aluminum Quick Disconnect\/pushlock fittings, and a -8 ORB Plug are provided in the kit.\u003c\/li\u003e\n\n\u003cli\u003eComes with 3” hole saw to make the only hole needed in your tank for install.\u003c\/li\u003e\n\n\u003cli\u003eInner ring designed to go through the 3” hole so tank does not need to be dropped.\u003c\/li\u003e\n\n\u003cli\u003eO-ring design for a perfect seal.\u003c\/li\u003e\n\n\u003cli\u003eSuper strong 1 piece machined billet design.\u003c\/li\u003e\n\n\u003cli\u003eCan be installed on any fuel tank with an available 4” diameter flat area\u003c\/li\u003e\n\n\u003cli\u003eSupporting the Company that Invented the Single Hole Design Sump!\u003c\/li\u003e\n\n\u003cli\u003eCan be used on metal or plastic tanks\u003c\/li\u003e\n\n\u003cli\u003eWorks on gas or diesel applications\u003c\/li\u003e\n\n\u003cli\u003eDESIGNED AND MANUFACTURED IN WOODBURY,TN USA!!!\u003cbr\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eSump Body\u003c\/li\u003e\n\n\u003cli\u003eSump \"Pacman\" in Tank Backer Ring\u003c\/li\u003e\n\n\u003cli\u003e3\" Hole Saw (Plastic Tank Only. If Installing On Metal Tank You Will Need To Purchase A Metal Hole Saw)\u003c\/li\u003e\n\n\u003cli\u003eStainless Steel Bolt\u003c\/li\u003e\n\n\u003cli\u003eSealing Washer\u003c\/li\u003e\n\n\u003cli\u003eO-Ring\u003c\/li\u003e\n\n\u003cli\u003e(2) -8 O-Ring Boss (ORB) to 1\/2\" QDC\/Push-lock Fittings\u003c\/li\u003e\n\n\u003cli\u003e(1) -8 O-Ring Boss (ORB) 1\/2\" Plug For Single Outlet Operation\u003c\/li\u003e\n\n\u003cli\u003e(1) -8 O-Ring Boss (ORB) to 5\/8\" QDC\/Push-lock Fitting\u003c\/li\u003e\n\n\u003cli\u003e(1) -8 O-Ring Boss (ORB) to 3\/8\" QDC\/Push-lock Fitting\u003c\/li\u003e\n\n\u003cli\u003e(1) 5\/16' Plug\u003c\/li\u003e\n\n\u003cli\u003e(1) 3\/8\" Plug\u003c\/li\u003e\n\n\u003cli\u003e(1) 1\/2\" Plug\u003c\/li\u003e\n\n\u003cli\u003e(3) O-Rings For the Fittings\u003c\/li\u003e\n\n\u003cli\u003e1\/4\" NPT Stainless Steel Drain Plug Fitting\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/n_GaBRX6SMY\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e \u003ciframe src=\"\/\/www.youtube.com\/embed\/_9GbXYBftVA\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Beans Diesel","offers":[{"title":"Default Title","offer_id":45075074908317,"sku":"280003","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198719614.jpg?v=1713411701"},{"product_id":"rudys-cat-fuel-filter-adapter-for-01-16-gm-lb7-lly-lbz-lmm-lml-duramax-diesel","title":"Rudy's CAT Fuel Filter Adapter For 01-16 GM LB7 LLY LBZ LMM LML Duramax Diesel","description":"\u003cp\u003eThe Rudy's CAT fuel filter adapter allows you to install a 2 micron CAT fuel filter on your 2001-2016 GM 6.6L Duramax diesel without any major modifications. Includes all necessary hardware for a complete installation.\n\n\n\n\u003c\/p\u003e\u003cp\u003eThe Rudy's CAT fuel filter adapter allows you to install a 2 micron CAT fuel filter on your 2001-2016 GM 6.6L Duramax diesel without any major modifications. Includes all necessary hardware for a complete installation.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eHardware\u003c\/li\u003e\n\n\u003cli\u003eStandoff Spacer\u003c\/li\u003e\n\n\u003cli\u003eCAT Fuel Filter Adapter\u003c\/li\u003e\n\n\u003cli\u003e2 Micron Fuel Filter (Interchangeable with the 1R-0750 CAT fuel filter)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2001-2016 GM 6.6L Duramax Diesel\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement For 6.6L Duramax Diesel Engines ONLY\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Rudy's","offers":[{"title":"Default Title","offer_id":45075124584605,"sku":"DP0064-RAW","price":59.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198721200.jpg?v=1713412078"},{"product_id":"fuelab-velocity-200-fuel-system-for-01-10-6-6l-duramax","title":"Fuelab Velocity 200 Fuel System For 01-10 6.6L Duramax","description":"\u003cp\u003e\u003cstrong\u003eFuelab Velocity 200 Fuel System For 2001-2010 Chevy\/GMC 6.6L Duramax Diesel\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThe most advanced diesel lift pump system available on the market today. Includes a speed controllable dc brushless pump, Vortex Air Separation technology, and fuel filtration with water separation to provide pure diesel fuel to the injector pump for optimal performance.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePump Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eInternal bypass at 8psi\u003c\/li\u003e\n\n\u003cli\u003eHigh efficiency sling vane positive displacement pump\u003c\/li\u003e\n\n\u003cli\u003eSpecial housing shape for extremely quiet operation and steady pressure\u003c\/li\u003e\n\n\u003cli\u003eCarbon 9-vane construction with pressure balanced rotor for high reliability\u003c\/li\u003e\n\n\u003cli\u003eBacked by a 2-year limited warranty\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMotor Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eLightweight super-efficient DC brushless motor reduces current draw\u003c\/li\u003e\n\n\u003cli\u003eLow mass rotor for high speed reaction to changes in speed and flow\u003c\/li\u003e\n\n\u003cli\u003ePowerful high flux density Neodymium rare earth magnets\u003c\/li\u003e\n\n\u003cli\u003eNo motor brushes to wear out or corrode (low-Sulfur diesel, no problem)\u003c\/li\u003e\n\n\u003cli\u003eWet motor design, no dynamic shaft seals that can wear out\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eElectronic Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eInternal Speed control for variable flow operation\u003c\/li\u003e\n\n\u003cli\u003e12 to 16 volt vehicle electrical system compatibility\u003c\/li\u003e\n\n\u003cli\u003eAccepts PWM input for speed control\u003c\/li\u003e\n\n\u003cli\u003eContinuous dutymotor speed can be adjusted for appropriate demand\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eConstruction Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eCompact, lightweight design\u003c\/li\u003e\n\n\u003cli\u003eVortex Air Separation Chamber\u003c\/li\u003e\n\n\u003cli\u003ePre-set check valve at 18psi\u003c\/li\u003e\n\n\u003cli\u003eSuperior valve design and components for stable pressure\u003c\/li\u003e\n\n\u003cli\u003eBillet Aluminum Construction with anodize per MIL-A-8625, Type II\u003c\/li\u003e\n\n\u003cli\u003eHigh quality mounting brackets that mount directly to frame no drilling\u003c\/li\u003e\n\n\u003cli\u003eLong-life, multi-fuel compatible Fluorosilicone static seals\u003c\/li\u003e\n\n\u003cli\u003eAccepts standard or port style 10AN fittings.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Required install kit 20202 sold separately!\u003c\/p\u003e","brand":"Fuelab","offers":[{"title":"Default Title","offer_id":45075373752477,"sku":"30304","price":798.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198728178.jpg?v=1713414328"},{"product_id":"fuelab-fuel-system-installation-kit-for-01-10-6-6l-duramax","title":"Fuelab Fuel System Installation Kit For 01-10 6.6L Duramax","description":"\u003cp\u003e\u003cstrong\u003eFuelab Fuel System Installation Kit For 2001-2010 Chevy\/GMC 6.6L Duramax Diesel\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThis Installation Kit is intended to work with Fuelab Velocity Series 200 Fuel System, Model 30304. Consult instructions included with Fuelab Velocity Series 200 Fuel System. This Installation Kit is also intended to be used for replacement of OEM lift pump systems that are originally installed on vehicle. This kit applies to GM Duramax Diesel Vehicles, between and including the years of 2001-2010.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFL500 Fuel Line, 1\/2 , Superflex Qty 12\u003c\/li\u003e\n\n\u003cli\u003eFL375 Fuel Line, 3\/8 , Superflex Qty 7\u003c\/li\u003e\n\n\u003cli\u003e10ORB08 10 ORB x 08 MJIC adapter, Steel Qty 1\u003c\/li\u003e\n\n\u003cli\u003e08ORB08 08 ORB x 08 MJIC adapter, Steel Qty 1\u003c\/li\u003e\n\n\u003cli\u003e08ORB06 08 ORB x 06 MJIC adapter, Steel Qty 1\u003c\/li\u003e\n\n\u003cli\u003ePO188 08 FJIC swivel x 1\/2 pushlock Qty 2\u003c\/li\u003e\n\n\u003cli\u003ePO166 08 FJIC swivel x 3\/8 pushlock Qty 1\u003c\/li\u003e\n\n\u003cli\u003eQC500 1\/2 QC for return Qty 1\u003c\/li\u003e\n\n\u003cli\u003eWCL500 Clamp for Inlet Straining Filter Qty 3\u003c\/li\u003e\n\n\u003cli\u003eCBT6 Cable Ties, Nylon 5\" Qty 6\u003c\/li\u003e\n\n\u003cli\u003e551770 Inlet Straining Filter Qty 1\u003c\/li\u003e\n\n\u003cli\u003eEPH15 Extended pump harness with fused adapter kit Qty 1\u003c\/li\u003e\n\n\u003cli\u003eCL32 Filler Neck Clamp Qty 2\u003c\/li\u003e\n\n\u003cli\u003eFNR Filler Neck Return Qty 1\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e This listing is for the installation kit \u003cstrong\u003eONLY\u003c\/strong\u003e. Fuel Pump Sold Separately \u003c\/div\u003e","brand":"Fuelab","offers":[{"title":"Default Title","offer_id":45075373785245,"sku":"20202","price":599.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198728194.jpg?v=1713414330"},{"product_id":"rudys-mini-fuel-tank-sump-kit-w-integrated-return-holesaw-dp0267-mini","title":"Rudy's Mini Fuel Tank Sump Kit w\/ Holesaw","description":"\u003cp\u003eThe Rudy's Mini Fuel Tank Sump provides you with a perfect option to maximize fuel delivery, and customization when installing your aftermarket fuel system. The Mini Design allows for a more versatile mounting locations.  Avoid the common 1\/4 tank issues associated with in-tank draw straws used with fuel systems such as AirDog, FASS and many others. The Rudy's mini sump features a one-hole design that only requires drilling a single hole for installation. A machined groove for the o-ring gasket ensures a leak-free seal, and the o-ring is designed to fit onto the bottom of the tank without requiring you to remove it from the truck. We even include a 2\" hole saw for drilling your tank!\u003c\/p\u003e\n\u003cp\u003eIncludes barbed fittings for 1\/2\" \u0026amp; 5\/8\" hose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-In Fuel Return\u003c\/li\u003e\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\u003cli\u003eSmall design for easier mounting\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2\" Hole Saw Included For Easy Installation\u003c\/li\u003e\n\u003cli\u003eMade From Aircraft Grade T6 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eWorks Great With Stock \u0026amp; Aftermarket Fuel Tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal - Cutting Required \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNot recommended for off-road applications or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Rudy's","offers":[{"title":"Default Title","offer_id":45075475792029,"sku":"DP0267-Mini","price":89.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/267.png?v=1726686088"},{"product_id":"2-gallons-allison-transynd-tes-668-synthetic-trans-fluid-allison-spin-on-filter-2-15e2e1-29539579","title":"2 Gallons Allison Transynd TES 668 Synthetic Trans Fluid\/Allison Spin On Filter","description":"\u003cp\u003eCastrol TranSynd 668 is a premium, full-synthetic automatic transmission fluid specifically formulated for Allison Transmission® on-highway automatic transmissions. TranSynd 668 provides oxidative stability, anti-wear performance, and friction durability, as well as TES 668™ specification differentiators such as extended anti-shudder durability and extended clutch friction durability.\u003c\/p\u003e\u003cp\u003eCastrol TranSynd 668 is a premium, full-synthetic automatic transmission fluid specifically formulated for Allison Transmission® on-highway automatic transmissions. TranSynd 668 provides oxidative stability, anti-wear performance, and friction durability, as well as TES 668™ specification differentiators such as extended anti-shudder durability and extended clutch friction durability. This fluid features an Allison TES 668 approval. The TES 668 spec is fully backwards compatible for TES 295® applications, but is not backwards compatible for TES 468™ applications.\u003c\/p\u003e\n\n\u003cp\u003eWhen servicing the Allison 1000 or Allison 2000 transmission on your GM vehicle, don’t forget about the external filter. This Allison Spin-On Filter is the correct OEM replacement for Allison 1000 and Allison 2000 transmissions. To keep your transmission healthy, Rudy's recommends replacing the spin-on filter every 12,000 miles. When changing this filter, ensure that you clean and reuse the filter magnet that is sandwiched between the filter and the transmission. Oftentimes, this magnet will stick to the filter and be discarded by mistake. \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eOEM Allison Spin-on filter\u003c\/li\u003e\n\n\u003cli\u003eDelivers improved gear protection.\u003c\/li\u003e\n\n\u003cli\u003eDelivers extended anti-shudder durability.\u003c\/li\u003e\n\n\u003cli\u003eDelivers extended clutch-friction durability.\u003c\/li\u003e\n\n\u003cli\u003eExcellent corrosion and foaming resistance.\u003c\/li\u003e\n\n\u003cli\u003eExcellent thermal and oxidative stability that helps to prevent deposits and oil thickening.\u003c\/li\u003e\n\n\u003cli\u003eExcellent temperature reduction through reduced friction leads to longer oil and component life.\u003c\/li\u003e\n\n\u003cli\u003eExcellent shear stability properties help to retain full transmission performance over entire oil-drain interval.\u003c\/li\u003e\n\n\u003cli\u003eOutstanding cold-flow properties enables faster oil flow to all critical components particularly during cold starts.\u003c\/li\u003e\n\n\u003cli\u003eOptimized frictional characteristics gives smoother gear changing at all ambient temperatures and load conditions.\u003c\/li\u003e\n\n\u003cli\u003eExcellent transmission cleanliness under all conditions permits extended oil-drain intervals and decreased servicing.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2001-2019 Chevrolet Silverado 2500HD\/3500HD With Allison Transmission \u003c\/li\u003e\n\n\u003cli\u003e2001-2019 GMC Sierra 2500HD\/3500HD With Allison Transmission\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eBackwards Compatible with Allison TES 295\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Allison Transmission","offers":[{"title":"Default Title","offer_id":45075970883741,"sku":"(2) 15E2E1 | 29539579","price":148.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198748505.jpg?v=1713418639"},{"product_id":"airdog-ii-5g-220-gph-fuel-pump-kit-for-01-10-gm-6-6l-duramax-lb7-lly-lbz-lmm-a7sabc512","title":"AirDog II 5G 220 GPH Fuel Pump Kit For 01-10 GM 6.6L Duramax LB7\/LLY\/LBZ\/LMM","description":"\u003cp\u003eAn industry first! The AirDog® II-5G is the first diesel Fuel Air Separation System to include an integrated diaphragm fuel pressure regulator. This regulator allows for more fuel pressure adjustability, offers better fuel flow at pressure, and can be boost compensated! This system has larger porting to allow less cavitation and noise at the inlet of the higher flowing 220GPH pumps. All AirDog II-5G systems come with improved wiring harnesses and connectors as well! The wiring harness is now 12ga from the battery all the way to the internal connections in the motor. A Metri-Pack 280 connector replaces the Deutch 2 pin connector which allows more more current flow without creating excessive heat. All other connectors in the harness are weather pack to keep the elements out. This system has the same 4G motor technology that has proven itself to be a reliable, quiet operating system. It also retains the \"Demand Flow\" of the older AirDog II variants. Demand Flow means whatever fuel the injection system does not consume gets recirculated back through the filter base.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e220 GPH Pump\u003c\/li\u003e\n\n\u003cli\u003eLifetime Warranty\u003c\/li\u003e\n\n\u003cli\u003eLarger Ports Over Previous Pumps\u003c\/li\u003e\n\n\u003cli\u003eDiaphragm Fuel Pressure Regulator\u003c\/li\u003e\n\n\u003cli\u003eDemand Flow Design\u003c\/li\u003e\n\n\u003cli\u003eAdjustable From 7-70 PSI\u003c\/li\u003e\n\n\u003cli\u003eIncreased Fuel Economy\u003c\/li\u003e\n\n\u003cli\u003eIncreased Horsepower \u0026amp; Torque Output\u003c\/li\u003e\n\n\u003cli\u003eIncreased Injection Pump Life\u003c\/li\u003e\n\n\u003cli\u003eLonger Injector Life\u003c\/li\u003e\n\n\u003cli\u003eImproved Throttle Response\u003c\/li\u003e\n\n\u003cli\u003eReduced Exhaust Emissions\u003c\/li\u003e\n\n\u003cli\u003eIncreased Fuel Flow Rates\u003c\/li\u003e\n\n\u003cli\u003eRemoves Air\/Vapor from Diesel Fuel\u003c\/li\u003e\n\n\u003cli\u003eComplete Installation Kit and Detailed Instructions\u003c\/li\u003e\n\n\u003cli\u003e1\/2\" Fuel Lines with OEM-Style Quick Connect Fittings\u003c\/li\u003e\n\n\u003cli\u003e4 Bearing Motor with Intermediate Shaft For Reduced Pump Noise\u003c\/li\u003e\n\n\u003cli\u003eThis Is A Complete Kit – Includes Pump \u0026amp; All Needed Mounting Hardware\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2001-2010 Chevrolet Silverado 2500\/3500 6.6L Duramax\u003c\/li\u003e\n\n\u003cli\u003e2001-2010 GMC Sierra 2500\/3500 6.6L Duramax\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eWe recommend installing the AirDog® on the inside of the frame rail, but we understand some applications just don’t have the room.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45075992608925,"sku":"A7SABC512","price":902.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198748814.png?v=1713418690"},{"product_id":"airdog-150-gph-lift-pump-fuel-bowl-bypass-for-01-10-6-6l-lb7-lly-lbz-lmm-duramax-a4spbc188-dp0056-1","title":"AirDog 150 GPH Lift Pump\/Fuel Bowl Bypass For 01-10 6.6L LB7 LLY LBZ LMM Duramax","description":"\u003cp\u003eThe PureFlow AirDog 150GPH Air\/Fuel Separation System for your 2001-2010 GM 6.6L Duramax provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel. The AirDog is lift pump and filter system, that enhances the fuel delivery to your engine with a commercial duty system.\u003c\/p\u003e\n\n\u003cp\u003eYour High Performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air\/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air\/vapor can cause galling and pitting of the injector barrel\/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time!\u003c\/p\u003e\n\n\u003cp\u003eThe Airdog works by pulling fuel from the fuel tank containing entrained air\/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air\/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air\/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation.\u003c\/p\u003e\n\n\u003cp\u003eThe Rudy's Duramax Fuel Filter Delete for your 2001-2016 GM 6.6L Duramax is for use after the installation of an AirDog or FASS Fuel Air Separation System. Once installed the factory fuel filter is no longer needed and can be easily removed by using this factory fuel filter canister delete. Because your Duramax fuel filter is located after the AirDog or FASS filtration system you will still need to replace the factory filter every 5,000-8,000 miles. This filter delete kit will replace your now useless fuel filter with a spin on canister that will allow fuel to flow freely into the engine, saving you even more money. This spin on fuel filter delete kit is a perfect addition to your AirDog or FASS Titanium diesel fuel pump and comes with all required hardware for a professional installation.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eSmall \u0026amp; Compact\u003c\/li\u003e\n\n\u003cli\u003eDual Feed Gerotor Pump\u003c\/li\u003e\n\n\u003cli\u003eLow Amperage Motor for Efficiency and Endurance\u003c\/li\u003e\n\n\u003cli\u003eSelf-aligning Motor for Less Maintenance \u0026amp; Less Noise\u003c\/li\u003e\n\n\u003cli\u003eIntermediate Pump Shaft to Separate the Motor from Fuel\u003c\/li\u003e\n\n\u003cli\u003eQuick Connect Components\u003c\/li\u003e\n\n\u003cli\u003eFlow Rate of 150 GPH\u003c\/li\u003e\n\n\u003cli\u003eMounts to Frame\u003c\/li\u003e\n\n\u003cli\u003eRetains WIF (Water In Fuel) Sensor\u003c\/li\u003e\n\n\u003cli\u003eInstalls In Place Of Stock Filter\u003c\/li\u003e\n\n\u003cli\u003eAllows For Unrestricted Fuel Flow To Engine\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2001-2010 Chevrolet Silverado 2500HD\/3500HD 6.6L Duramax LB7\/LLY\/LBZ\/LMM\u003c\/li\u003e\n\n\u003cli\u003e2001-2010 GMC Sierra 2500HD\/3500HD 6.6L Duramax LB7\/LLY\/LBZ\/LMM\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAirdog comes with Limited Lifetime Warranty, when registered properly\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45076116144285,"sku":"A4SPBC188 | DP0056-1","price":820.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198753493.jpg?v=1713420025"},{"product_id":"airdog-150-gph-lift-pump-fuel-bowl-bypass-sump-for-2001-2010-gm-6-6l-duramax-a4spbc188-dp0056-dp0028","title":"AirDog 150 GPH Lift Pump\/Fuel Bowl Bypass\/Sump For 2001-2010 GM 6.6L Duramax","description":"\u003cp\u003eThe PureFlow AirDog 150GPH Air\/Fuel Separation System for your 2001-2010 GM 6.6L Duramax provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel. The AirDog is lift pump and filter system, that enhances the fuel delivery to your engine with a commercial duty system.\u003c\/p\u003e\n\n\u003cp\u003eYour High Performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air\/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air\/vapor can cause galling and pitting of the injector barrel\/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time!\u003c\/p\u003e\n\n\u003cp\u003eThe Airdog works by pulling fuel from the fuel tank containing entrained air\/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air\/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air\/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation.\u003c\/p\u003e\n\n\u003cp\u003eThe Rudy's Duramax Fuel Filter Delete for your 2001-2016 GM 6.6L Duramax is for use after the installation of an AirDog or FASS Fuel Air Separation System. Once installed the factory fuel filter is no longer needed and can be easily removed by using this factory fuel filter canister delete. Because your Duramax fuel filter is located after the AirDog or FASS filtration system you will still need to replace the factory filter every 5,000-8,000 miles. This filter delete kit will replace your now useless fuel filter with a spin on canister that will allow fuel to flow freely into the engine, saving you even more money. This spin on fuel filter delete kit is a perfect addition to your AirDog or FASS Titanium diesel fuel pump and comes with all required hardware for a professional installation.\u003c\/p\u003e\n\n\u003cp\u003eFuel Sumps are nothing new these days, you see them everywhere and every company seems to have one. What we have done is step the tank sump up a notch. Made from 6061 Billet aluminum this sump is built like a tank and is super simple to install. While still using a no-tank drop design we have made this sump to where it will install with 1 single bolt with one single 3\" hole in your tank. This means less places to leak and much quicker install.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eSmall \u0026amp; Compact\u003c\/li\u003e\n\n\u003cli\u003eDual Feed Gerotor Pump\u003c\/li\u003e\n\n\u003cli\u003eLow Amperage Motor for Efficiency and Endurance\u003c\/li\u003e\n\n\u003cli\u003eSelf-aligning Motor for Less Maintenance \u0026amp; Less Noise\u003c\/li\u003e\n\n\u003cli\u003eIntermediate Pump Shaft to Separate the Motor from Fuel\u003c\/li\u003e\n\n\u003cli\u003eQuick Connect Components\u003c\/li\u003e\n\n\u003cli\u003eFlow Rate of 150 GPH\u003c\/li\u003e\n\n\u003cli\u003eMounts to Frame\u003c\/li\u003e\n\n\u003cli\u003eRetains WIF (Water In Fuel) Sensor\u003c\/li\u003e\n\n\u003cli\u003eInstalls In Place Of Stock Filter\u003c\/li\u003e\n\n\u003cli\u003eAllows For Unrestricted Fuel Flow To Engine\u003c\/li\u003e\n\n\u003cli\u003eBuilt-In Drain Plug\u003c\/li\u003e\n\n\u003cli\u003eDual O-Ring Design\u003c\/li\u003e\n\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2001-2010 Chevrolet Silverado 2500HD\/3500HD 6.6L Duramax LB7\/LLY\/LBZ\/LMM\u003c\/li\u003e\n\n\u003cli\u003e2001-2010 GMC Sierra 2500HD\/3500HD 6.6L Duramax LB7\/LLY\/LBZ\/LMM\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAirdog comes with Limited Lifetime Warranty, when registered properly\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45076116504733,"sku":"A4SPBC188 | DP0056 | DP0028","price":868.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198753509.jpg?v=1713420038"},{"product_id":"airdog-ii-5g-100-gph-fuel-lift-pump-for-01-10-gm-6-6l-lb7-lly-lbz-lmm-duramax-a7spbc259","title":"AirDog II 5G 100 GPH Fuel Lift Pump For 01-10 GM 6.6L LB7 LLY LBZ LMM Duramax","description":"\u003cdiv class=\"discription\"\u003e\n\n\u003cdiv class=\"warraper\"\u003e\n\n\u003cdiv class=\"discription-1\"\u003e\n\n\u003cdiv class=\"tab\"\u003e\n\n\u003cdiv id=\"content1\" class=\"section\"\u003e\n\n\u003cdiv class=\"b-desc\"\u003eThis is the AirDog II-5G DF-100-5G fuel system for the 2001-2010 Chevy\/GMC Duramax 6.6L Diesel. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. The suction side hooks up to the factory suction fitting in the fuel module. The pressure side connects directly to the factory injection pump feed line on the frame. The AirDog Air\/Vapor return is sent back to the tank through a filler neck tee. This system is one of our easiest installations. Our Duramax kits usually see the largest performance gains as these trucks do not come with a lift pump from the factory. This is a 100GPH (Gallon Per Hour) lift pump system for stock fuel system trucks.\u003c\/div\u003e\n\n\u003cdiv class=\"b-desc\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"b-desc\"\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePreset @ 8-10 PSI \u003c\/li\u003e\n\n\u003cli\u003eSupports Stock - 500HP\u003c\/li\u003e\n\n\u003cli\u003eLifetime Limited Warranty\u003c\/li\u003e\n\n\u003cli\u003eIncreased Engine Efficiency\u003c\/li\u003e\n\n\u003cli\u003eLow Flow Return For Reduced Aeration\u003c\/li\u003e\n\n\u003cli\u003eIntegrated Diaphragm Fuel Pressure Regulator\u003c\/li\u003e\n\n\u003cli\u003eMaintains Reliable \u0026amp; Quiet 5G Motor Technology\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n  \u003cstrong\u003eFitment:\u003c\/strong\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2001-2004 GM 6.6L Duramax LB7 \u003c\/li\u003e\n\n\u003cli\u003e2004.5-2005 GM 6.6L Duramax LLY\u003c\/li\u003e\n\n\u003cli\u003e2006-2007 GM 6.6L Duramax LBZ\u003c\/li\u003e\n\n\u003cli\u003e2007.5-2010 GM 6.6L Duramax LMM\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n  \u003cstrong\u003eIncluded:\u003c\/strong\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eWiring \u003c\/li\u003e\n\n\u003cli\u003ePlumbing\u003c\/li\u003e\n\n\u003cli\u003eHardware\u003c\/li\u003e\n\n\u003cli\u003eMounting Brackets\u003c\/li\u003e\n\n\u003cli\u003e100 GPH Fuel Pump\u003c\/li\u003e\n\n\u003cli\u003eInstallation Instructions\u003c\/li\u003e\n\n\u003cli\u003eFuel Filter \u0026amp; Water Seperator \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n  \u003cstrong\u003eNote:\u003c\/strong\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eBuyer acknowledges that some products may only be used when off-roading, and Buyer will comply with all vehicle and road safety guidelines\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"detail\"\u003e \u003c\/div\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45077768863901,"sku":"A7SPBC259","price":844.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198796040.jpg?v=1713428008"},{"product_id":"airdog-ii-5g-165-gph-fuel-lift-pump-for-01-10-gm-6-6l-lb7-lly-lbz-lmm-duramax-a7sabc509","title":"AirDog II 5G 165 GPH Fuel Lift Pump For 01-10 GM 6.6L LB7 LLY LBZ LMM Duramax","description":"\u003cdiv class=\"b-desc\"\u003eThis is the AirDog II-5G DF-165-5G fuel system for the 2001-2010 Chevy\/GMC Duramax 6.6L Diesel. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. The suction side hooks up to the factory suction fitting in the fuel module. The pressure side connects directly to the factory injection pump feed line on the frame. The AirDog Air\/Vapor return is sent back to the tank through a filler neck tee. This system is one of our easiest installations. Our Duramax kits usually see the largest performance gains as these trucks do not come with a lift pump from the factory. This is a 165GPH (Gallon Per Hour) lift pump system for moderately modified trucks.\u003c\/div\u003e\n\n\u003cdiv class=\"b-desc\"\u003e \u003c\/div\u003e\n\n\u003cdiv class=\"b-desc\"\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePreset @ 8-10 PSI \u003c\/li\u003e\n\n\u003cli\u003eSupports 500HP - 800HP\u003c\/li\u003e\n\n\u003cli\u003eLifetime Limited Warranty\u003c\/li\u003e\n\n\u003cli\u003eIncreased Engine Efficiency\u003c\/li\u003e\n\n\u003cli\u003eLow Flow Return For Reduced Aeration\u003c\/li\u003e\n\n\u003cli\u003eIntegrated Diaphragm Fuel Pressure Regulator\u003c\/li\u003e\n\n\u003cli\u003eMaintains Reliable \u0026amp; Quiet 5G Motor Technology\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"b-desc\"\u003e \u003c\/div\u003e\n\n\u003cdiv class=\"b-desc\"\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2001-2004 GM 6.6L Duramax LB7 \u003c\/li\u003e\n\n\u003cli\u003e2004.5-2005 GM 6.6L Duramax LLY\u003c\/li\u003e\n\n\u003cli\u003e2006-2007 GM 6.6L Duramax LBZ\u003c\/li\u003e\n\n\u003cli\u003e2007.5-2010 GM 6.6L Duramax LMM\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"b-desc\"\u003e \u003c\/div\u003e\n\n\u003cdiv class=\"b-desc\"\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eWiring \u003c\/li\u003e\n\n\u003cli\u003ePlumbing\u003c\/li\u003e\n\n\u003cli\u003eHardware\u003c\/li\u003e\n\n\u003cli\u003eMounting Brackets\u003c\/li\u003e\n\n\u003cli\u003e165 GPH Fuel Pump\u003c\/li\u003e\n\n\u003cli\u003eInstallation Instructions\u003c\/li\u003e\n\n\u003cli\u003eFuel Filter \u0026amp; Water Seperator \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"b-desc\"\u003e \u003c\/div\u003e\n\n\u003cdiv class=\"b-desc\"\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eBuyer acknowledges that some products may only be used when off-roading, and Buyer will comply with all vehicle and road safety guidelines\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45077768896669,"sku":"A7SABC509","price":866.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198796043.jpg?v=1713428010"},{"product_id":"xdp-remanufactured-cp3-fuel-pump-for-2006-2010-gm-6-6l-duramax-lbz-lmm-xd523","title":"XDP Remanufactured CP3 Fuel Pump For 2006-2010 GM 6.6L Duramax LBZ\/LMM","description":"\u003cdiv\u003eReplace the failed CP3 fuel pump on your 2006-2010 GM 6.6L Duramax LBZ\/LMM with the XDP Remanufactured CP3 Fuel Pump XD523. If your fuel rail pressure is low or you’re experiencing a loss of power, it could be due to a failed CP3 pump. This CP3 Fuel Pump from XDP is assembled using high-quality components and is remanufactured to meet or exceed strict factory specifications. Every pump is end-of-line tested to ensure a long service life and includes a 2-year warranty. \u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cbr\u003e\n\n\u003cdiv\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eRemanufactured CP3 Pump \u003c\/li\u003e\n\n\u003cli\u003eMeets or Exceeds OE Specifications \u003c\/li\u003e\n\n\u003cli\u003eEnd-Of-Line Testing To Ensure Quality \u003c\/li\u003e\n\n\u003cli\u003eAssembled With High-Quality Components \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan data-sheets-value=\"{\" gm duramax lbz data-sheets-userformat=\"{\"\u003e2006-2010 GM 6.6L Duramax LBZ\/LMM\u003c\/span\u003e\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan data-sheets-value=\"{\" remanufactured cp3 fuel pump xd523 data-sheets-userformat=\"{\"\u003eXDP Remanufactured CP3 Fuel Pump XD523\u003c\/span\u003e\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":45078842409117,"sku":"XD523","price":669.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198807051.jpg?v=1713430461"},{"product_id":"fleece-powerflo-750-10mm-stroker-cp3-injection-pump-01-10-gm-6-6l-duramax-diesel","title":"Fleece PowerFlo 750 10mm Stroker CP3 Injection Pump 01-10 GM 6.6L Duramax Diesel","description":"\u003cp\u003eThe Fleece Performance PowerFlo 750 CP3 for the GM Duramax is a straight forward, no inflated numbers, CP3 upgrade proven to support 750 RWHP with the proper complimenting modifications. Not only will it support 750 RWHP, but it also eliminates the factory fuel flow restiction that begins at 3,000 RPM. If you have a stock CP3 pump you are losing fuel flow and rail pressure after 3000 RPM, which correlates to lost horsepower when you need it most. This cost effective upgrade will allow you to maintain desired fuel rail pressure through your entire RPM range, as well as provide enough fuel to support 750rwhp. \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eBrand new Bosch CP3\u003c\/li\u003e\n\n\u003cli\u003eNo core charge or core to return\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded\u003c\/strong\u003e:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFleece PowerFlo 750 10mm Stroker CP3 Injection Pump\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2001-2010 GM 6.6L Duramax Diesel\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eThe fuel pressure regulator will need to be scaled appropriately when installed in a 2001-2005 (LB7 or LLY)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":45079152591005,"sku":"FPE-DMAX-CP3-10MM","price":2049.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198810195.jpg?v=1713431167"},{"product_id":"fleece-performance-powerflo-in-tank-lift-pump-for-2004-5-2007-gm-6-6l-duramax-fpe-34789","title":"Fleece Performance PowerFlo In-Tank Lift Pump For 2004.5-2007 Gm 6.6L Duramax","description":"\u003cp\u003eThe 2004.5-2010 Duramax PowerFlo In-Tank Lift Pump, available at Fleece Performance Engineering, is a high-performance fuel system upgrade designed to enhance the fuel delivery capabilities of your Duramax engine. Engineered with precision and durability in mind, this in-tank lift pump effectively increases fuel flow rates, ensuring consistent fuel pressure even under high-demand conditions. With its innovative design, it provides a reliable and steady fuel supply to your engine, preventing fuel starvation and potential power loss. The installation process is straightforward, as it is designed as a direct replacement for the stock lift pump, making it compatible with the OEM wiring harness and fuel lines. Trust in Fleece Performance Engineering's commitment to quality and performance, as this Duramax PowerFlo In-Tank Lift Pump undergoes rigorous testing to ensure its reliability and functionality. Upgrade your Duramax engine with confidence, knowing that you have a top-of-the-line component that will improve fuel delivery and support optimal engine performance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eHigh-performance fuel system upgrade for 2004.5-2010 Duramax engines.\u003c\/li\u003e\n\n\u003cli\u003eIncreases fuel flow rates for enhanced fuel delivery capabilities.\u003c\/li\u003e\n\n\u003cli\u003eMaintains consistent fuel pressure under high-demand conditions.\u003c\/li\u003e\n\n\u003cli\u003ePrevents fuel starvation and potential power loss.\u003c\/li\u003e\n\n\u003cli\u003eDirect replacement for the stock lift pump for easy installation.\u003c\/li\u003e\n\n\u003cli\u003eCompatible with OEM wiring harness and fuel lines.\u003c\/li\u003e\n\n\u003cli\u003ePrecision-engineered for durability and reliability.\u003c\/li\u003e\n\n\u003cli\u003eRigorously tested to ensure functionality and performance.\u003c\/li\u003e\n\n\u003cli\u003eImproves fuel delivery for optimal engine performance.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded\u003c\/strong\u003e:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFleece Performance PowerFlo In-Tank Lift Pump\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2004.5-2007 Gm 6.6L Duramax\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":45079237361821,"sku":"FPE-34789","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198810558.jpg?v=1713431325"},{"product_id":"fleece-performance-sureflo-sending-unit-for-04-5-07-chevrolet-gmc-6-6l-duramax-fpe-sf-gm-0410","title":"Fleece Performance SureFlo Sending Unit For 04.5-07 Chevrolet\/GMC 6.6L Duramax","description":"\u003cp\u003eThe Fleece FPE-SF-GM-0410 SureFlo Performance Sending Unit eliminated the need for drill holes in the fuel tank when install a lift pump in your 2004.5-2010 GM 6.6L Duramax. This sending unit is uniquely designed to work with aftermarket lift pump kits. Featuring factory-style quick disconnects, this direct-fit replacement sending unit requires no tank modification and is simple to install. This sending unit pulls diesel directly from the bottom of this bucket assembly and returns the fuel to the bucket assembly as well. This prevents air from being drawn into the pump and removes the risk of a 1\/4 tank issues. Even at low fuel levels, the integrated one-way check valves allow diesel to flow freely inside this unit. This sending unit is a great alternative for trucks that need to repair a malfunctioning level sender or if you need run custom fuel lines directly to the tank.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNew O-ring Or Flange Seal\u003c\/li\u003e\n\n\u003cli\u003eHeavy Duty Billet Aluminum Cap\u003c\/li\u003e\n\n\u003cli\u003eNew Fuel Level Electronics \u0026amp; Fuel Float\u003c\/li\u003e\n\n\u003cli\u003e-8 AN To 3\/4'-16 Straight Male Fitting With O-Ring\u003c\/li\u003e\n\n\u003cli\u003eOEM Style Fitment That Requires No Tank Cutting Or Drilling\u003c\/li\u003e\n\n\u003cli\u003eUniversal -8 AN Ports For Professional Plumbing Of A Custom Fuel Setup\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFleece Performance SureFlo Sending Unit\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2004.5-2010 Chevrolet Silverado 2500\/3500 6.6L Duramax\u003c\/li\u003e\n\n\u003cli\u003e2004.5-2010 GMC Sierra 2500\/3500 6.6L Duramax\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eSureFlo performance sending units are designed for use in conjunction with an aftermarket externally mounted fuel pump OR as a replacement sending unit for trucks originally equipped without an in-tank low pressure lift pump.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":45079370367133,"sku":"FPE-SF-GM-0410","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198811025.jpg?v=1713431571"},{"product_id":"lift-pump-113058000-install-kit-for-01-10-gmc-sierra-2500hd-3500hd-8-cyl-6-6l","title":"Lift Pump 113058000 Install Kit For 01-10 GMC Sierra 2500HD\/ 3500HD 8 Cyl 6.6L","description":"\u003cp\u003eLift Pump Install Kit - 1\/2\" to 1\/2\" (use with stock fuel pickup)\n\nThere is more to installing that new electric lift pump onto your 6.6L Duramax than just bolting it up.\n\nYou need to plumb it in as well.\n\nThis kit provides the exact hoses, fittings, and clamps that you will need to easily complete the installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e1\/2\" Fittings\/Hose\/Clamps - connecting fuel tank to lift pump\u003c\/li\u003e\n\n\u003cli\u003e1\/2\" Fitting\/Hose\/Clamps - connecting lift pump to truck\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePre-cut hoses for easy installation\u003c\/li\u003e\n\n\u003cli\u003eBrass fittings\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2001-2010 GMC Sierra 2500HD\/ Sierra 3500HD 8 Cyl 6.6L Duramax Turbocharger\u003c\/li\u003e\n\n\u003cli\u003e2007 GMC Sierra 3500 Classic\/ Sierra 2500HD Classic 8 Cyl 6.6L Duramax Turbocharger\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"PPE","offers":[{"title":"Default Title","offer_id":45080345247901,"sku":"113058000","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198814509.webp?v=1713433018"},{"product_id":"precision-parts-billet-aluminum-diesel-sump-with-integrated-return-for-cummins-duramax-powerstroke-dp0477","title":"Precision Parts Billet Aluminum Diesel Sump with Integrated Return For Cummins Duramax Powerstroke","description":"\u003csection data-scroll=\"\" class=\"cmp-product-section cmp-product-description open animate--fade-in\"\u003e\n\u003cdiv class=\"cmp-product-section__inner\"\u003e\n\u003cdiv class=\"cmp-product-description__content\"\u003e\n\u003csection data-scroll=\"\" class=\"cmp-product-section cmp-product-description open animate--fade-in\"\u003e\n\u003cdiv class=\"cmp-product-section__inner\"\u003e\n\u003cdiv class=\"cmp-product-description__content\"\u003e\n\u003cp\u003eThe Precision Parts Billet Fuel Tank Sump with a built-in fuel return is the superior choice for optimizing fuel delivery and facilitating seamless customization when integrating your aftermarket fuel system. Say goodbye to the common 1\/4 tank issues associated with in-tank draw straws used in systems like AirDog and FASS. Our billet sump boasts a one-hole design, simplifying installation with only a single hole to drill.\u003c\/p\u003e\n\u003cp\u003eCrafted with precision, the Precision Parts billet sump features a machined groove for the o-ring gasket, ensuring a leak-free seal. The inner-ring is thoughtfully designed to fit snugly into the tank without necessitating removal from the truck. As part of our commitment to convenience, we even include a hole saw for effortless tank drilling!\u003c\/p\u003e\n\u003cp\u003eWhat sets this sump apart from others in the Precision Parts lineup is its innovative built-in return. Unlike traditional aftermarket fuel systems that may require cutting and \"teeing\" into the factory fuel filler neck, our design eliminates this need. By utilizing the built-in return port, you can effortlessly route return fuel back to the tank without modifying other components, ensuring a clean and straightforward installation.\u003c\/p\u003e\n\u003cp\u003eFor superior fuel quality, the Precision Parts Sump incorporates a stand pipe that positions the returned fuel above the fuel feed. This ingenious design prevents the possibility of feeding your engine aerated return fuel, enhancing overall performance. The package includes barbed fittings for 1\/2\" hose, adding to the versatility of this top-tier sump.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-In Fuel Return\u003c\/li\u003e\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\u003cli\u003eStand Pipe Separates Return Fuel \u0026amp; Feed\u003c\/li\u003e\n\u003cli\u003eCrafted From Aircraft Grade T6 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eCompatible with Stock \u0026amp; Aftermarket Fuel Tanks\u003c\/li\u003e\n\u003cli\u003e1\/4 NPT Drain - Should You Need To Drain Your Tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"b-desc\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Precision Parts Billet Sump\u003c\/li\u003e\n\u003cli\u003e1 x Holesaw\u003c\/li\u003e\n\u003cli\u003e2 x Mounting Bolts\u003c\/li\u003e\n\u003cli\u003e1 x Drain Plug \u003c\/li\u003e\n\u003cli\u003e2 x Washers\u003c\/li\u003e\n\u003cli\u003e1 x O-ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"b-desc\"\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal - Cutting Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cdiv class=\"b-desc\"\u003e\n\u003cstrong\u003eNote: \u003c\/strong\u003eWhile this sump is ideal for a wide range of applications, it is not recommended for off-road use or vehicles with potential ground clearance issues. Exercise extra caution to ensure the fuel tank is free of debris after drilling.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection data-scroll=\"\" class=\"cmp-product-section cmp-product-specification animate--fade-in\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection data-scroll=\"\" class=\"cmp-product-section cmp-product-specification animate--fade-in\"\u003e\u003c\/section\u003e","brand":"Precision Parts","offers":[{"title":"Default Title","offer_id":45082661453981,"sku":"DP0477","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198823669.png?v=1713437419"},{"product_id":"rudys-black-fuel-filter-bypass-w-wif-plug-for-01-16-gm-6-6l-duramax-lb7-lly-lbz-lmm-lml-dp0056-black-dp0403","title":"Rudy's Black Fuel Filter Bypass w\/ WIF Plug For 01-16 GM 6.6L Duramax LB7 LLY LBZ LMM LML","description":"\u003cp\u003eThe Rudy's Duramax Fuel Filter Bypass for your 2001-2016 GM 6.6L Duramax is for use after the installation of an AirDog or FASS Fuel Air Separation System. Once installed the factory fuel filter is no longer needed and can be easily removed by using this factory fuel filter canister bypass. Because your Duramax fuel filter is located after the AirDog or FASS filtration system you will still need to replace the factory filter every 5,000-8,000 miles. This filter bypass kit will replace your now useless fuel filter with a spin on canister that will allow fuel to flow freely into the engine, saving you even more money. This spin on fuel filter bypass kit is a perfect addition to your AirDog or FASS Titanium diesel fuel pump and comes with all required hardware for a professional installation.\n\n\n\n\u003c\/p\u003e\u003cp\u003eThe Rudy's Duramax Fuel Filter Bypass for your 2001-2016 GM 6.6L Duramax is for use after the installation of an AirDog or FASS Fuel Air Separation System. Once installed the factory fuel filter is no longer needed and can be easily removed by using this factory fuel filter canister bypass. Because your Duramax fuel filter is located after the AirDog or FASS filtration system you will still need to replace the factory filter every 5,000-8,000 miles. This filter bypass kit will replace your now useless fuel filter with a spin on canister that will allow fuel to flow freely into the engine, saving you even more money. This spin on fuel filter bypass kit is a perfect addition to your AirDog or FASS Titanium diesel fuel pump and comes with all required hardware for a professional installation.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\n\u003cli\u003eInstalls In Place Of Stock Filter\u003c\/li\u003e\n\n\u003cli\u003eIncludes plug for WIF (Water In Fuel) Sensor\u003c\/li\u003e\n\n\u003cli\u003eAllows For Unrestricted Fuel Flow To Engine\u003c\/li\u003e\n\n\u003cli\u003eEliminates Costs Associated With Changing Stock Filter\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2001-2016 GMC Sierra 2500HD\/3500HD 6.6L LB7\/LLY\/LBZ\/LMM\/LML Duramax Diesel\u003c\/li\u003e\n\n\u003cli\u003e2001-2016 Chevrolet Silverado 2500HD\/3500HD 6.6L LB7\/LLY\/LBZ\/LMM\/LML Duramax Diesel\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement For 6.6L LB7\/LLY\/LBZ\/LMM\/LML Duramax Diesel\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Rudy's","offers":[{"title":"Default Title","offer_id":45082722697373,"sku":"DP0056-BLACK | DP0403","price":77.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198826234.png?v=1713438666"},{"product_id":"rudys-polished-fuel-filter-bypass-w-wif-plug-for-01-16-gm-6-6l-duramax-lb7-lly-lbz-lmm-lml","title":"Rudy's Polished Fuel Filter Bypass w\/ WIF Plug For 01-16 GM 6.6L Duramax LB7 LLY LBZ LMM LML","description":"\u003cp\u003eThe Rudy's Duramax Fuel Filter Bypass for your 2001-2016 GM 6.6L Duramax is for use after the installation of an AirDog or FASS Fuel Air Separation System. Once installed the factory fuel filter is no longer needed and can be easily removed by using this factory fuel filter canister bypass. Because your Duramax fuel filter is located after the AirDog or FASS filtration system you will still need to replace the factory filter every 5,000-8,000 miles. This filter bypass kit will replace your now useless fuel filter with a spin on canister that will allow fuel to flow freely into the engine, saving you even more money. This spin on fuel filter bypass kit is a perfect addition to your AirDog or FASS Titanium diesel fuel pump and comes with all required hardware for a professional installation.\n\n\n\n\u003c\/p\u003e\u003cp\u003eThe Rudy's Duramax Fuel Filter Bypass for your 2001-2016 GM 6.6L Duramax is for use after the installation of an AirDog or FASS Fuel Air Separation System. Once installed the factory fuel filter is no longer needed and can be easily removed by using this factory fuel filter canister bypass. Because your Duramax fuel filter is located after the AirDog or FASS filtration system you will still need to replace the factory filter every 5,000-8,000 miles. This filter bypass kit will replace your now useless fuel filter with a spin on canister that will allow fuel to flow freely into the engine, saving you even more money. This spin on fuel filter bypass kit is a perfect addition to your AirDog or FASS Titanium diesel fuel pump and comes with all required hardware for a professional installation.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\n\u003cli\u003eInstalls In Place Of Stock Filter\u003c\/li\u003e\n\n\u003cli\u003eIncludes plug for WIF (Water In Fuel) Sensor\u003c\/li\u003e\n\n\u003cli\u003eAllows For Unrestricted Fuel Flow To Engine\u003c\/li\u003e\n\n\u003cli\u003eEliminates Costs Associated With Changing Stock Filter\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2001-2016 GMC Sierra 2500HD\/3500HD 6.6L LB7\/LLY\/LBZ\/LMM\/LML Duramax Diesel\u003c\/li\u003e\n\n\u003cli\u003e2001-2016 Chevrolet Silverado 2500HD\/3500HD 6.6L LB7\/LLY\/LBZ\/LMM\/LML Duramax Diesel\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement For 6.6L LB7\/LLY\/LBZ\/LMM\/LML Duramax Diesel\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Rudy's","offers":[{"title":"Default Title","offer_id":45082722893981,"sku":"DP0056 | DP0403","price":77.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198826240.png?v=1713438668"},{"product_id":"ppe-fuel-lift-pump-w-install-kit-for-2001-2010-gmc-chevrolet-6-6l-duramax","title":"PPE Fuel Lift Pump w\/ Install Kit For 2001-2010 GMC\/Chevrolet 6.6L Duramax","description":"\u003cp\u003eThe PPE Diesel Fuel Lift Pump is a key component in a reliable fuel system. Rather than depending on the OEM CP3 to pull fuel from the tank, the PPE Diesel Fuel Lift Pump pushes fuel through the lines and filter. It eliminates the possibility of air being drawn into the system, collapsed hoses, and fuel restrictions from occurring. Includes pump, mounting bracket, dual 12V fuel pump relays (JD1914)(RL45), and wiring diagram.\u003c\/p\u003e\n\u003cp\u003eThere is more to installing that new electric lift pump onto your 6.6L Duramax than just bolting it up. You need to plumb it in as well. This kit provides the exact hoses, fittings, and clamps that you will need to easily complete the installation of the PPE Fuel Lift Pump.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 160 gallons per hour (GPH) fuel flow\u003c\/li\u003e\n\u003cli\u003eOperating pressure 4-8 PSI with engine idling\u003c\/li\u003e\n\u003cli\u003eHigh flow 1\/2 inch NPT inlet and outlet helps increase longevity of the stock CP3 pump\u003c\/li\u003e\n\u003cli\u003eCompatible with biodiesel, low and ultra low-sulfur diesel\u003c\/li\u003e\n\u003cli\u003ePre-cut hoses for easy installation\u003c\/li\u003e\n\u003cli\u003eBrass Fittings\u003c\/li\u003e\n\u003cli\u003e1 year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2001-2010 GMC Sierra 2500HD\/3500HD 6.6L Duramax\u003c\/li\u003e\n\u003cli\u003e2001-2010 Chevrolet Silverado 2500HD\/3500HD 6.6L Duramax\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePump\u003c\/li\u003e\n\u003cli\u003eMounting Bracket\u003c\/li\u003e\n\u003cli\u003eDual 12V Fuel Pump Relays\u003c\/li\u003e\n\u003cli\u003eWiring Diagram\u003c\/li\u003e\n\u003cli\u003e1\/2\" Fittings\/Hose\/Clamps - connecting fuel tank to lift pump\u003c\/li\u003e\n\u003cli\u003e1\/2\" Fitting\/Hose\/Clamps - connecting lift pump to truck\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect Fit\u003c\/li\u003e\n\u003cli\u003e50 States Emissions Legal\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PPE","offers":[{"title":"Default Title","offer_id":45164709904541,"sku":"113050000 | 113058000","price":215.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/5_4c0fb218-6dc2-4d9b-a8d0-47811b4128d4.png?v=1727274905"},{"product_id":"bd-diesel-common-rail-fuel-plug-for-07-18-dodge-cummins-6-7l-04-10-duramax-6-6l","title":"BD Diesel Common Rail Fuel Plug For 07-18 Dodge Cummins 6.7L 04-10 Duramax 6.6L","description":"\u003cp\u003eGet consistent fuel rail pressure from your 2004.5-2010 GM 6.6 Duramax or 2007.5-2018 Dodge Ram 6.7 Diesel with the BD-Power 1050071 Fuel Rail Plug. Weak or failing fuel pressure relief valves can cause starting and drivability issues. BD's Fuel Rail Plug holds up to 30,000 psi rail pressure, making it perfect for high performance engine applications. No modification is required and an O-ring is included for a complete installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReplace Failing Pressure Relief Valves\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSeals in 30,000 Psi Rail Pressure\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eImproves Engine Starting\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasily Replaces The Stock Relief Valve\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA Must For High Performance Engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) BD Diesel Common Rail Fuel Plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2007.5-2012 Dodge Cummins 6.7L\u003c\/li\u003e\n\u003cli\u003e2004.5-2010 Chevy Duramax 6.6L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e12-Months or 12,000 Miles warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BD-Power","offers":[{"title":"Default Title","offer_id":46087269449885,"sku":"1050071","price":55.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/Screenshot2024-10-22122955.png?v=1729620851"},{"product_id":"airdog-ii-5g-100-gph-fuel-pump-sump-kit-for-2001-2010-gmc-chevy-6-6l-duramax","title":"AirDog II 5G 100 GPH Fuel Pump \u0026 Sump Kit For 2001-2010 GMC\/Chevy 6.6L Duramax","description":"\u003cp\u003eThis is the AirDog® II-5G DF-100-5G fuel system for the 2001-2010 Chevy\/GMC Duramax 6.6L Diesel. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. The suction side hooks up to the factory suction fitting in the fuel module. The pressure side connects directly to the factory injection pump feed line on the frame. The AirDog® Air\/Vapor return is sent back to the tank through a filler neck tee. This system is one of our easiest installations. Our Duramax kits usually see the largest performance gains as these trucks do not come with a lift pump from the factory. This is a 100GPH (Gallon Per Hour) lift pump system for stock fuel system trucks. Check out our installation manual for a list of parts that are included with this kit.\u003c\/p\u003e\n\u003cp\u003eThe PureFlow AirDog® universal fuel sump helps aid aftermarket fuel systems by utilizing gravity to pull fuel from the tank. Our redesigned sump has both a suction and return port! We integrated a dual o-ring seal to prevent leaks! The installation of our fuel sump eliminates the common 1\/4 tank suction issue associated with a draw straw-style fuel pickup. This sump is manufactured in America using corrosion resistant components.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFuel System Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarger Ports Over Previous Pumps\u003c\/li\u003e\n\u003cli\u003eIncreases Engine Efficiency\u003c\/li\u003e\n\u003cli\u003eProvides Better Fuel Flow At Pressure\u003c\/li\u003e\n\u003cli\u003eReliable \u0026amp; Quiet 5G Technology\u003c\/li\u003e\n\u003cli\u003e12-Gauge Wiring Harness\u003c\/li\u003e\n\u003cli\u003eLow Flow Return For Reduce Aeration\u003c\/li\u003e\n\u003cli\u003eIntegrated Diaphragm Fuel Pressure Regulator\u003c\/li\u003e\n\u003cli\u003eDemand Flow Design\u003c\/li\u003e\n\u003cli\u003e100 GPH Fuel Pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSump Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCan be Installed Without Dropping the Fuel Tank\u003c\/li\u003e\n\u003cli\u003eEliminate 1\/4 Tank Problems\u003c\/li\u003e\n\u003cli\u003eFeed and Return Port\u003c\/li\u003e\n\u003cli\u003eUses Corrosion Resistant Components\u003c\/li\u003e\n\u003cli\u003eInstallation Takes Less Than an Hour\u003c\/li\u003e\n\u003cli\u003eDual O-Ring Seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2001-2010 GMC Sierra 2500\/3500 6.6L Duramax \u003c\/li\u003e\n\u003cli\u003e2001-2010 Chevrolet Silverado 2500\/3500 6.6L Duramax\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAirDog II 5G 100 GPH Fuel Pump\u003c\/li\u003e\n\u003cli\u003eAirDog Fuel Sump\u003c\/li\u003e\n\u003cli\u003eFuel Filter\u003c\/li\u003e\n\u003cli\u003eWater Separator\u003c\/li\u003e\n\u003cli\u003eWiring Harness\u003c\/li\u003e\n\u003cli\u003eFuel Lines \u0026amp; Fittings\u003c\/li\u003e\n\u003cli\u003eBrackets\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eNot For Sale Or Street Use In California\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":46967071834269,"sku":"A7SPBC259 | AD09SMP","price":1019.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1.6_13217741-41a1-41db-a52c-968a4872974a.png?v=1751029137"},{"product_id":"airdog-ii-5g-165-gph-fuel-pump-sump-kit-for-2001-2010-gmc-chevy-6-6l-duramax","title":"AirDog II 5G 165 GPH Fuel Pump \u0026 Sump Kit For 2001-2010 GMC\/Chevy 6.6L Duramax","description":"\u003cp\u003eThis is the AirDog® II-5G DF-165-5G fuel system for the 2001-2010 Chevy\/GMC Duramax 6.6L Diesel. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. The suction side hooks up to the factory suction fitting in the fuel module. The pressure side connects directly to the factory injection pump feed line on the frame. The AirDog® Air\/Vapor return is sent back to the tank through a filler neck tee. This system is one of our easiest installations. Our Duramax kits usually see the largest performance gains as these trucks do not come with a lift pump from the factory. This is a 165GPH (Gallon Per Hour) lift pump system for moderately modified trucks. Check out our installation manual for a list of parts that are included with this kit.\u003c\/p\u003e\n\u003cp\u003eThe PureFlow AirDog® universal fuel sump helps aid aftermarket fuel systems by utilizing gravity to pull fuel from the tank. Our redesigned sump has both a suction and return port! We integrated a dual o-ring seal to prevent leaks! The installation of our fuel sump eliminates the common 1\/4 tank suction issue associated with a draw straw-style fuel pickup. This sump is manufactured in America using corrosion resistant components.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFuel System Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarger Ports Over Previous Pumps\u003c\/li\u003e\n\u003cli\u003eIncreases Engine Efficiency\u003c\/li\u003e\n\u003cli\u003eProvides Better Fuel Flow At Pressure\u003c\/li\u003e\n\u003cli\u003eReliable \u0026amp; Quiet 5G Technology\u003c\/li\u003e\n\u003cli\u003e12-Gauge Wiring Harness\u003c\/li\u003e\n\u003cli\u003eLow Flow Return For Reduce Aeration\u003c\/li\u003e\n\u003cli\u003eIntegrated Diaphragm Fuel Pressure Regulator\u003c\/li\u003e\n\u003cli\u003eDemand Flow Design\u003c\/li\u003e\n\u003cli\u003e165 Gallons Per Hour\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSump Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCan be Installed Without Dropping the Fuel Tank\u003c\/li\u003e\n\u003cli\u003eEliminate 1\/4 Tank Problems\u003c\/li\u003e\n\u003cli\u003eFeed and Return Port\u003c\/li\u003e\n\u003cli\u003eUses Corrosion Resistant Components\u003c\/li\u003e\n\u003cli\u003eInstallation Takes Less Than an Hour\u003c\/li\u003e\n\u003cli\u003eDual O-Ring Seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2001-2010 GMC Sierra 2500\/3500 6.6L Duramax \u003c\/li\u003e\n\u003cli\u003e2001-2010 Chevrolet Silverado 2500\/3500 6.6L Duramax\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAirDog II 5G 165 GPH Fuel Pump\u003c\/li\u003e\n\u003cli\u003eAirDog Fuel Sump\u003c\/li\u003e\n\u003cli\u003eFuel Filter\u003c\/li\u003e\n\u003cli\u003eWater Separator\u003c\/li\u003e\n\u003cli\u003eWiring Harness\u003c\/li\u003e\n\u003cli\u003eFuel Lines \u0026amp; Fittings\u003c\/li\u003e\n\u003cli\u003eBrackets\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eNot For Sale Or Street Use In California\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":46967104602269,"sku":"A7SABC509 | AD09SMP","price":1041.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1.6_a9a938a2-dbec-411e-aace-d902f8d9e4e1.png?v=1751029846"},{"product_id":"airdog-ii-5g-220-gph-fuel-pump-sump-kit-for-2001-2010-gmc-chevy-6-6l-duramax","title":"AirDog II 5G 220 GPH Fuel Pump \u0026 Sump Kit For 2001-2010 GMC\/Chevy 6.6L Duramax","description":"\u003cp\u003eThis is the AirDog® II-5G DF-220-5G fuel system for the 2001-2010 Chevy\/GMC Duramax 6.6L Diesel. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. The suction side hooks up to the factory suction fitting in the fuel module. The pressure side connects directly to the factory injection pump feed line on the frame. The AirDog® Air\/Vapor return is sent back to the tank through a filler neck tee. This system is one of our easiest installations. Our Duramax kits usually see the largest performance gains as these trucks do not come with a lift pump from the factory. This is a 220GPH (Gallon Per Hour) lift pump system for moderately modified trucks. Check out our installation manual for a list of parts that are included with this kit.\u003c\/p\u003e\n\u003cp\u003eThe PureFlow AirDog® universal fuel sump helps aid aftermarket fuel systems by utilizing gravity to pull fuel from the tank. Our redesigned sump has both a suction and return port! We integrated a dual o-ring seal to prevent leaks! The installation of our fuel sump eliminates the common 1\/4 tank suction issue associated with a draw straw-style fuel pickup. This sump is manufactured in America using corrosion resistant components.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFuel System Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarger Ports Over Previous Pumps\u003c\/li\u003e\n\u003cli\u003eIncreases Engine Efficiency\u003c\/li\u003e\n\u003cli\u003eProvides Better Fuel Flow At Pressure\u003c\/li\u003e\n\u003cli\u003eReliable \u0026amp; Quiet 5G Technology\u003c\/li\u003e\n\u003cli\u003e12-Gauge Wiring Harness\u003c\/li\u003e\n\u003cli\u003eLow Flow Return For Reduce Aeration\u003c\/li\u003e\n\u003cli\u003eIntegrated Diaphragm Fuel Pressure Regulator\u003c\/li\u003e\n\u003cli\u003eDemand Flow Design\u003c\/li\u003e\n\u003cli\u003e220 Gallons Per Hour\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSump Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCan be Installed Without Dropping the Fuel Tank\u003c\/li\u003e\n\u003cli\u003eEliminate 1\/4 Tank Problems\u003c\/li\u003e\n\u003cli\u003eFeed and Return Port\u003c\/li\u003e\n\u003cli\u003eUses Corrosion Resistant Components\u003c\/li\u003e\n\u003cli\u003eInstallation Takes Less Than an Hour\u003c\/li\u003e\n\u003cli\u003eDual O-Ring Seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2001-2010 GMC Sierra 2500\/3500 6.6L Duramax \u003c\/li\u003e\n\u003cli\u003e2001-2010 Chevrolet Silverado 2500\/3500 6.6L Duramax\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAirDog II 5G 220 GPH Fuel Pump\u003c\/li\u003e\n\u003cli\u003eAirDog Fuel Sump\u003c\/li\u003e\n\u003cli\u003eFuel Filter\u003c\/li\u003e\n\u003cli\u003eWater Separator\u003c\/li\u003e\n\u003cli\u003eWiring Harness\u003c\/li\u003e\n\u003cli\u003eFuel Lines \u0026amp; Fittings\u003c\/li\u003e\n\u003cli\u003eBrackets\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eNot For Sale Or Street Use In California\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":46967113482397,"sku":"A7SABC512 | AD09SMP","price":1077.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1.6_be27557c-fbae-4794-a41e-ab9c9555576f.png?v=1751030740"},{"product_id":"airdog-fuel-filter-2-micron-replacement-water-separator-1","title":"AirDog Fuel Filter (2 Micron) \u0026 Replacement Water Separator","description":"\u003cp\u003e\n\n\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cbr\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits All AirDog \u0026amp; AirDog II Kits \u003c\/li\u003e\n\u003cli\u003eGenuine AirDog Replacement \u003c\/li\u003e\n\u003cli\u003e2 Micron Filtration Rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cbr\u003eThe AirDog Replacement Water Separator WS100 is a direct replacement for your AirDog Fuel System. The built-in drain allows you to empty any water from the filter during routine maintenance. The life expectancy for the Airdog Water Separator could be up to 25K miles or a year. However, those figures can change drastically depending on fuel quality. Order a few extra and keep them in your cab or toolbox. \u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits All AirDog \u0026amp; AirDog II Kits \u003c\/li\u003e\n\u003cli\u003eGenuine AirDog Replacement \u003c\/li\u003e\n\u003cli\u003eReplaces Part# WS80\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAirDog FF100-2 \u0026amp; WS100\u003c\/p\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":67979329405249,"sku":"FF100-2-WS100","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198666722.jpg?v=1713403655"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/collections\/F198716112.png?v=1791290969","url":"https:\/\/rudysdiesel.com\/collections\/2006-2007-6-6l-lbz-duramax-fuel-system-components.oembed","provider":"Rudy's Performance Parts","version":"1.0","type":"link"}