{"title":"2007.5-2009 6.7L 24V Cummins Intakes \u0026 Manifolds","description":"0","products":[{"product_id":"banks-power-ram-air-cold-air-intake-system-dry-filter-07-09-dodge-6-7l-bkqc-42175-d","title":"Banks Power Ram-Air Cold-Air Intake System Dry Filter 07-09 Dodge 6.7L","description":"\u003cp\u003eBanks Ram-Air Superiority. Testing, testing and more testing. Banks Ram-Air Intake Systems are tested and proven. They start out as CAD software prototypes and are put through flow simulations. After a hardware prototype is made, it's tested on a flowbench. Then it's tested on the vehicle. And finally, Banks density-tests the Ram-Air against stock and many competitors. Proven design. Proven performance. Thanks to its enclosed cold-air housing, huge inlet, giant dome-shaped lifetime filter and streamlined design, Banks Ram-Air Intake maximizes the flow of cool, dense air to the engine for greater power and fuel economy. It flows 50 percent better than stock-and delivers greater air density to the turbo's inlet than the stock system and all competitors tested. Longer service life, too. An aftermarket exclusive: with 4.5 inch bellows, Banks Ram-Air accommodates engine movement, which protects the components and extends service life. What's more, Ram-Air is designed to not cause fault or error codes. It's all about density. And Banks Ram-Air Intake delivers. The harder you work your truck, the more Banks Ram-Air Intake improves power and fuel economy!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtensively tested and validated\u003c\/li\u003e\n\u003cli\u003eEnclosed housing keeps out hot, power-robbing engine air\u003c\/li\u003e\n\u003cli\u003eInhales cooler outside air for more power and MPG\u003c\/li\u003e\n\u003cli\u003eGiant filter maximizes high-flow filtration\u003c\/li\u003e\n\u003cli\u003eHelps engine run cooler\u003c\/li\u003e\n\u003cli\u003eAccommodates engine movement\u003c\/li\u003e\n\u003cli\u003ePrevents component damage\u003c\/li\u003e\n\u003cli\u003eExtends service life and requires fewer cleanings\u003c\/li\u003e\n\u003cli\u003e5-year Limited Warranty (Filter: Lifetime Limited Warranty)\u003c\/li\u003e\n\u003cli\u003eOutflows stock up to 50 percent\u003c\/li\u003e\n\u003cli\u003eReduces exhaust gas temps (EGTs)\u003c\/li\u003e\n\u003cli\u003eExclusive 4.5 inch bellows to accommodate engine movement\u003c\/li\u003e\n\u003cli\u003eDRY Air Filter Element\u003c\/li\u003e\n\u003cli\u003eEmissions compliant: CARB EO D-161-103\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRam-Air Cold-Air Intake System, Dry Filter for use with 2007-2009 Dodge 6.7L\u003c\/p\u003e","brand":"Banks Power","offers":[{"title":"Default Title","offer_id":44932604821661,"sku":"BKQC-42175-D","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198711243.jpg?v=1712571631"},{"product_id":"sb-cold-air-intake-for-07-09-dodge-ram-2500-3500-4500-5500-6-7l-cummins-dry-extendable-white-75-5093d-bkjf-75-5093d","title":"S\u0026B Cold Air Intake For 07-09 Dodge Ram 2500 3500 4500 5500 6.7L Cummins Dry Extendable White 75-5093D","description":"\u003cp\u003eMaximum Performance Our cold air intake for the 2007-2009 Dodge Ram Cummins 6.7L was engineered to minimize air restriction and flows 37.06 percent better than stock.\u003c\/p\u003e\n\u003cp\u003eThis kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.\u003c\/p\u003e\n\u003cp\u003eProtect Your Engine. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.\u003c\/p\u003e\n\u003cp\u003eAvailable in either 8-layer Cotton Cleanable or Dry Extendable media.\u003c\/p\u003e\n\u003cp\u003eMillion Mile Warranty - S\u0026amp;B Air Filters and Intake Kits purchased from Authorized dealers are backed by S\u0026amp;B's Million Mile Limited Warranty. Only when used under the typical driving conditions and on vehicles or which they were designed. If one of our products is not performing properly or is defective, S\u0026amp;B replace it.\u003c\/p\u003e\n\u003cp\u003eBreath Easy. Your Engine and warranty are protected - Installing a S\u0026amp;B Intake Kit or Air Filter will not void your vehicles warranty, as long as you properly install and maintain your intake kit or filter.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 07-09 Dodge Ram 2500 \/ 3500 \/ 4500 \/ 5500 L6-6.7L Cummins\u003c\/li\u003e\n\u003cli\u003eFilter Type Dry\u003c\/li\u003e\n\u003cli\u003eFilter Dry Extendable\u003c\/li\u003e\n\u003cli\u003eReplacement Filter KF-1035D\u003c\/li\u003e\n\u003cli\u003eFilter Material Paper\u003c\/li\u003e\n\u003cli\u003eFilter Color White\u003c\/li\u003e\n\u003cli\u003eColor Black\u003c\/li\u003e\n\u003cli\u003eEngine Manufacturer Cummins\u003c\/li\u003e\n\u003cli\u003eStreet Legal In All US States Yes\u003c\/li\u003e\n\u003cli\u003eCARB Exempt ID D-590-19\u003c\/li\u003e\n\u003cli\u003eFuel Type Diesel\u003c\/li\u003e\n\u003cli\u003eLiter 6.7 Liter\u003c\/li\u003e\n\u003cli\u003eWarranty Million Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"S\u0026B","offers":[{"title":"Default Title","offer_id":45073564467357,"sku":"75-5093D","price":399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198738561.png?v=1713405254"},{"product_id":"sb-cold-air-intake-for-07-09-dodge-ram-2500-3500-4500-5500-6-7l-cummins-cotton-cleanable-red-75-5093-bkjf-75-5093","title":"S\u0026B Cold Air Intake For 07-09 Dodge Ram 2500 3500 4500 5500 6.7L Cummins Cotton Cleanable Red 75-5093","description":"\u003cp\u003eMaximum Performance Our cold air intake for the 2007-2009 Dodge Ram Cummins 6.7L was engineered to minimize air restriction and flows 37.06 percent better than stock.\u003c\/p\u003e\n\u003cp\u003eThis kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.\u003c\/p\u003e\n\u003cp\u003eProtect Your Engine. This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine.\u003c\/p\u003e\n\u003cp\u003eAvailable in either 8-layer Cotton Cleanable or Dry Extendable media.\u003c\/p\u003e\n\u003cp\u003eMillion Mile Warranty - S\u0026amp;B Air Filters and Intake Kits purchased from Authorized dealers are backed by S\u0026amp;B's Million Mile Limited Warranty. Only when used under the typical driving conditions and on vehicles or which they were designed. If one of our products is not performing properly or is defective, S\u0026amp;B replace it.\u003c\/p\u003e\n\u003cp\u003eBreath Easy. Your Engine and warranty are protected - Installing a S\u0026amp;B Intake Kit or Air Filter will not void your vehicles warranty, as long as you properly install and maintain your intake kit or filter.\u003cbr\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 07-09 Dodge Ram 2500 \/ 3500 \/ 4500 \/ 5500 L6-6.7L Cummins\u003c\/li\u003e\n\u003cli\u003eFilter Type Oiled\u003c\/li\u003e\n\u003cli\u003eFilter Cotton Cleanable\u003c\/li\u003e\n\u003cli\u003eQuantity Of Oil 87 Grams\u003c\/li\u003e\n\u003cli\u003eReplacement Filter KF-1035\u003c\/li\u003e\n\u003cli\u003eQuantity Of Oil Power Stack 17 Grams\u003c\/li\u003e\n\u003cli\u003eFilter Material Cotton Gause\u003c\/li\u003e\n\u003cli\u003eFilter Color Red\u003c\/li\u003e\n\u003cli\u003eOil Color Red\u003c\/li\u003e\n\u003cli\u003eColor Black\u003c\/li\u003e\n\u003cli\u003eEngine Manufacturer Cummins\u003c\/li\u003e\n\u003cli\u003eStreet Legal In All US States Yes\u003c\/li\u003e\n\u003cli\u003eCARB Exempt ID D-590-19\u003c\/li\u003e\n\u003cli\u003eFuel Type Diesel\u003c\/li\u003e\n\u003cli\u003eLiter 6.7 Liter\u003c\/li\u003e\n\u003cli\u003eWarranty Million Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"S\u0026B","offers":[{"title":"Default Title","offer_id":45073605492893,"sku":"75-5093","price":399.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198738359.png?v=1713405373"},{"product_id":"rudys-black-cold-air-intake-kit-with-oiled-filter-for-07-5-12-6-7-cummins","title":"Rudy's Black Cold Air Intake Kit With Oiled Filter For 07.5-12 6.7 Cummins","description":"\u003cp\u003e\u003cstrong\u003eRudy's Black Cold Air Intake Kit With Oiled Filter For 2007.5-2012 Dodge Ram 6.7L Cummins Diesel\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e4\" Aluminum Construction\u003c\/li\u003e\n\n\u003cli\u003eGloss Black Finish\u003c\/li\u003e\n\n\u003cli\u003eWashable\/Reusable Oiled Filter\u003c\/li\u003e\n\n\u003cli\u003eAll Hardware Included\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2007.5-2012 Dodge Ram 6.7L Cummins Diesel\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Rudy's","offers":[{"title":"Default Title","offer_id":45075435520157,"sku":"DP0190-BLACK","price":114.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198739893.jpg?v=1713415378"},{"product_id":"rudys-polished-oiled-filter-4-air-intake-for-07-5-12-dodge-6-7l-cummins-diesel","title":"Rudy's Polished Oiled Filter 4\" Air Intake For 07.5-12 Dodge 6.7L Cummins Diesel","description":"\u003cp\u003eThe Rudy's 4\" high flow intake elbow replaces the plastic intake elbow on your 6.7L Cummins engine. Not only will the larger diameter of this high flow intake elbow increase airflow to your turbocharger, but it will also lower EGT's with the unrestricted design. Utilizes Rudy's Oiled Filter for optimum breathability. The Rudy's 4\" high flow intake elbow has a Polished finish and is covered by a 1-year warranty.\u003c\/p\u003e\u003cp\u003eThe Rudy's 4\" high flow intake elbow replaces the plastic intake elbow on your 6.7L Cummins engine. Not only will the larger diameter of this high flow intake elbow increase airflow to your turbocharger, but it will also lower EGT's with the unrestricted design. Utilizes Rudy's Oiled Filter for optimum breathability. The Rudy's 4\" high flow intake elbow has a Polished finish and is covered by a 1-year warranty.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePolished finish\u003c\/li\u003e\n\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\n\u003cli\u003eCleanable oiled filter\u003c\/li\u003e\n\n\u003cli\u003eAll hardware included\u003c\/li\u003e\n\n\u003cli\u003e4\" aluminum construction\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2007.5-2012 Dodge Ram 6.7L Cummins Diesel Engine\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Rudy's","offers":[{"title":"Default Title","offer_id":45075435651229,"sku":"DP0190-POL","price":139.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198739895.jpg?v=1713415379"},{"product_id":"banks-raw-monster-ram-intake-system-w-plate-grid-heater-for-13-18-ram-cummins-copy","title":"Banks Raw Monster-Ram Intake System W\/ Grid Heater Upgrade For 07.5-12 Ram Cummins","description":"\u003cp\u003eThe Monster-Ram improves airflow from the intercooler. It flows 936 cfm (72.7 lbs\/min) with Banks’ High-Flow Heater and Billet Intake Plate compared to stock's 421 cfm (38.6 lbs\/min). Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.\u003c\/p\u003e\n\u003cp\u003eBanks’ High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.\u003c\/p\u003e\n\u003cp\u003eUtilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction. With four 1\/8” NPT ports, perfect for temperature and pressure sensors, the sky's the limit for data acquisition and expandability. Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003cli\u003e3-3\/8 inch inlet\u003c\/li\u003e\n\u003cli\u003eFour 1\/8 inch NPT ports\u003c\/li\u003e\n\u003cli\u003eQuicker throttle response\u003c\/li\u003e\n\u003cli\u003eOutflows stock over 122%\u003c\/li\u003e\n\u003cli\u003eNatural Raw Finish, ready for paint\u003c\/li\u003e\n\u003cli\u003eAccommodates stock mounting points\u003c\/li\u003e\n\u003cli\u003eOptimizes air pressure and distribution\u003c\/li\u003e\n\u003cli\u003eLarger and less restrictive than stock intake\u003c\/li\u003e\n\u003cli\u003eImproves flow of oxygen-rich air into cylinders\u003c\/li\u003e\n\u003cli\u003eRaises boost without increasing turbine drive pressure\u003c\/li\u003e\n\u003cli\u003eIncludes proprietary fuel line and all necessary hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2007.5-2012 Dodge Ram 2500\/3500 6.7L Cummins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmissions Compliant: CARB EO# Pending CARB Compliance\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eDoes NOT fit Cab and Chassis\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Banks Power","offers":[{"title":"Default Title","offer_id":45883191066781,"sku":"42797","price":718.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198747945.jpg?v=1712574081"},{"product_id":"banks-red-monster-ram-intake-system-w-grid-heater-upgrade-for-07-5-12-ram-cummins-copy","title":"Banks Red Monster-Ram Intake System W\/ Grid Heater Upgrade For 07.5-12 Ram Cummins","description":"\u003cp\u003eThe Monster-Ram improves airflow from the intercooler. It flows 936 cfm (72.7 lbs\/min) with Banks’ High-Flow Heater and Billet Intake Plate compared to stock's 421 cfm (38.6 lbs\/min). Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.\u003c\/p\u003e\n\u003cp\u003eBanks’ High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.\u003c\/p\u003e\n\u003cp\u003eUtilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction. With four 1\/8” NPT ports, perfect for temperature and pressure sensors, the sky's the limit for data acquisition and expandability. Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003cli\u003e3-3\/8 inch inlet\u003c\/li\u003e\n\u003cli\u003eFour 1\/8 inch NPT ports\u003c\/li\u003e\n\u003cli\u003eQuicker throttle response\u003c\/li\u003e\n\u003cli\u003eOutflows stock over 122%\u003c\/li\u003e\n\u003cli\u003ePowder coat red finish\u003c\/li\u003e\n\u003cli\u003eAccommodates stock mounting points\u003c\/li\u003e\n\u003cli\u003eOptimizes air pressure and distribution\u003c\/li\u003e\n\u003cli\u003eLarger and less restrictive than stock intake\u003c\/li\u003e\n\u003cli\u003eImproves flow of oxygen-rich air into cylinders\u003c\/li\u003e\n\u003cli\u003eRaises boost without increasing turbine drive pressure\u003c\/li\u003e\n\u003cli\u003eIncludes proprietary fuel line and all necessary hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2007.5-2012 Dodge Ram 2500\/3500 6.7L Cummins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmissions Compliant: CARB EO# Pending CARB Compliance\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eDoes NOT fit Cab and Chassis\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Banks Power","offers":[{"title":"Default Title","offer_id":45883681243293,"sku":"42797-PC","price":748.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/Red_Composite_PlateOnSide_720x_2d33c745-9535-4c41-8f5a-213363fe7ed5.webp?v=1724863489"},{"product_id":"banks-black-monster-ram-intake-system-w-grid-heater-upgrade-for-07-5-12-ram-cummins","title":"Banks Black Monster-Ram Intake System W\/ Grid Heater Upgrade For 07.5-12 Ram Cummins","description":"\u003cp\u003eThe Monster-Ram improves airflow from the intercooler. It flows 936 cfm (72.7 lbs\/min) with Banks’ High-Flow Heater and Billet Intake Plate compared to stock's 421 cfm (38.6 lbs\/min). Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.\u003c\/p\u003e\n\u003cp\u003eBanks’ High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.\u003c\/p\u003e\n\u003cp\u003eUtilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction. With four 1\/8” NPT ports, perfect for temperature and pressure sensors, the sky's the limit for data acquisition and expandability. Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in USA\u003c\/li\u003e\n\u003cli\u003e3-3\/8 inch inlet\u003c\/li\u003e\n\u003cli\u003eFour 1\/8 inch NPT ports\u003c\/li\u003e\n\u003cli\u003eQuicker throttle response\u003c\/li\u003e\n\u003cli\u003eOutflows stock over 122%\u003c\/li\u003e\n\u003cli\u003ePowder coat black finish\u003c\/li\u003e\n\u003cli\u003eAccommodates stock mounting points\u003c\/li\u003e\n\u003cli\u003eOptimizes air pressure and distribution\u003c\/li\u003e\n\u003cli\u003eLarger and less restrictive than stock intake\u003c\/li\u003e\n\u003cli\u003eImproves flow of oxygen-rich air into cylinders\u003c\/li\u003e\n\u003cli\u003eRaises boost without increasing turbine drive pressure\u003c\/li\u003e\n\u003cli\u003eIncludes proprietary fuel line and all necessary hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2007.5-2012 Dodge Ram 2500\/3500 6.7L Cummins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEmissions Compliant: CARB EO# Pending CARB Compliance\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eDoes NOT fit Cab and Chassis\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Banks Power","offers":[{"title":"Default Title","offer_id":45883737112733,"sku":"42797-B","price":748.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/Black_Composite_PlateOnSide_720x_fd996428-c25d-4502-a1f5-74dd46d2198d.webp?v=1724863753"},{"product_id":"fleece-performance-high-flow-intake-plenum-kit-for-2007-5-2024-ram-6-7l-cummins","title":"Fleece Performance High Flow Intake Plenum Kit For 2007.5-2024 Ram 6.7L Cummins","description":"\u003cp\u003eEliminate the risk of a failed grid heater nut dropping into your engine on your 2007.5-2024 6.7L Cummins with our high flow intake plenum! Our plenum replaces the troublesome factory grid heater plate to increase airflow and throttle response \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCast aluminum high flow intake plate\u003c\/li\u003e\n\u003cli\u003eNew gaskets\u003c\/li\u003e\n\u003cli\u003eCharge air temperature sensor extension harness\u003c\/li\u003e\n\u003cli\u003eMAP sensor port plugs\u003c\/li\u003e\n\u003cli\u003e1 year limited warranty \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2007.5-2024 Dodge Ram 2500 6.7L 24V Cummins\u003c\/li\u003e\n\u003cli\u003e2007.5-2024 Dodge Ram 3500 6.7L 24V Cummins\u003c\/li\u003e\n\u003cli\u003e2007.5-2024 Dodge Ram 4500 6.7L 24V Cummins C\u0026amp;C\u003c\/li\u003e\n\u003cli\u003e2007.5-2024 Dodge Ram 5500 6.7L 24V Cummins C\u0026amp;C \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFleece Performance High Flow Intake Plenum Kit\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eThis product fits both pickup truck and cab \u0026amp; chassis applications \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":47792414752925,"sku":"FPE-CUMM-IP-0724","price":213.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_eb5791e2-957e-474d-85bc-e1c2353d3467.png?v=1774974271"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/collections\/F198738359.png?v=1792071963","url":"https:\/\/rudysdiesel.com\/collections\/2007-5-2009-6-7l-24v-cummins-intakes-manifolds.oembed","provider":"Rudy's Performance Parts","version":"1.0","type":"link"}