{"title":"6.7L Powerstroke Fuel System Components","description":null,"products":[{"product_id":"aeromotive-130gph-fuel-pump-pump-only-11802","title":"Aeromotive 130GPH Fuel Pump (Pump Only)","description":"\u003cp\u003eThe Aeromotive 11802 Fuel Pump offers a true solution to Duramax, Cummins and Powerstroke owners looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel Pump addresses the common failure points and issues that have plagued the market for years.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFiltration:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1\"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eShaft Seals \u0026amp; Pump Design:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eLike all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eExtreme Climates:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAeromotive understands that some need their trucks in harsh environments. For the extreme cold, the Aeromotive 11802 features (2) 8-AN ports to allow engine coolant to warm the pump body. In addition, the pump is a completely sealed unit allowing it to get wet or be submerged without skipping a beat.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFuel Pressure:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. The 11802 also comes standard with a pump mounted gauge so you can refine your pressure tuning without having to guess.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e||||\u003cul\u003e\n\u003cli\u003e130 GPH @ 10 PSI\u003c\/li\u003e\n\u003cli\u003ePump Only (No Installation Kit)\u003c\/li\u003e\n\u003cli\u003eIdeal For Custom Applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e Quick-Connect fittings shown installed in pump are for display only. Pump fittings and installation kit are not included. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073138581661,"sku":"11802","price":1414.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662903.jpg?v=1713403400"},{"product_id":"aeromotive-230gph-fuel-pump-pump-only-11806","title":"Aeromotive 230GPH Fuel Pump (Pump Only)","description":"\u003cp\u003eThe Aeromotive 11806 Fuel Pump offers a true solution to Duramax, Cummins and Powerstroke owners looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel Pump addresses the common failure points and issues that have plagued the market for years.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFiltration:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1\"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eShaft Seals \u0026amp; Pump Design:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eLike all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFuel Pressure:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRace Pump \u003c\/li\u003e\n\u003cli\u003e230 GPH @ 10 PSI \u003c\/li\u003e\n\u003cli\u003ePump Only (No Installation Kit)\u003c\/li\u003e\n\u003cli\u003eIdeal For Custom Applications \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e Quick-Connect fittings shown installed in pump are for display only. Pump fittings and installation kit are not included. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073139171485,"sku":"11806","price":1760.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662912.jpg?v=1713403413"},{"product_id":"aeromotive-5-8-pickup-1-2-return-kit","title":"Aeromotive 5\/8\" Pickup \u0026 1\/2\" Return Kit","description":"\u003cp\u003e\n\u003c\/p\u003e\u003cp\u003eThe Aeromotive 11805 5\/8\" Pickup \u0026amp; 1\/2\" Return Kit provides you with the necessary plumbing components for installing the Aeromotive 11802 Fuel Pump on your truck. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073139237021,"sku":"11805","price":490.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662911.jpg?v=1713403415"},{"product_id":"airdog-fuel-filter-2-micron-replacement-water-separator","title":"AirDog Fuel Filter (2 Micron) \u0026 Replacement Water Separator","description":"\u003cp\u003e\n\n\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cbr\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits All AirDog \u0026amp; AirDog II Kits \u003c\/li\u003e\n\u003cli\u003eGenuine AirDog Replacement \u003c\/li\u003e\n\u003cli\u003e2 Micron Filtration Rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cbr\u003eThe AirDog Replacement Water Separator WS100 is a direct replacement for your AirDog Fuel System. The built-in drain allows you to empty any water from the filter during routine maintenance. The life expectancy for the Airdog Water Separator could be up to 25K miles or a year. However, those figures can change drastically depending on fuel quality. Order a few extra and keep them in your cab or toolbox. \u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits All AirDog \u0026amp; AirDog II Kits \u003c\/li\u003e\n\u003cli\u003eGenuine AirDog Replacement \u003c\/li\u003e\n\u003cli\u003eReplaces Part# WS80\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAirDog FF100-2 \u0026amp; WS100\u003c\/p\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073151819933,"sku":"FF100-2-WS100","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198666722.jpg?v=1713403655"},{"product_id":"airdog-replacement-10-micron-fuel-filter","title":"AirDog Replacement 10 Micron Fuel Filter","description":"\u003cp\u003e\u003cstrong\u003eAirDog Replacement 10 Micron Fuel Filter\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThis is the 10 micron fuel filter that is a direct fit for all AirDog I, AirDog II, and AirDog II-4G models.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCross Reference Numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNAPA: 3420\u003c\/li\u003e\n\n\u003cli\u003eWIX: 33420\u003c\/li\u003e\n\n\u003cli\u003eBaldwin: BF-7531\u003c\/li\u003e\n\n\u003cli\u003eFleetguard: 5613\u003c\/li\u003e\n\n\u003cli\u003eDonaldson: P551315\u003c\/li\u003e\n\n\u003cli\u003eLuberFiner: LFF3545\u003c\/li\u003e\n\n\u003cli\u003eNote, this is for fitment and not micron rating.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073152606365,"sku":"FF100-10","price":32.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198717858.jpg?v=1713403667"},{"product_id":"airdog-replacement-water-separator","title":"AirDog Replacement Water Separator","description":"\u003cp\u003e\u003cstrong\u003eAirDog Replacement Water Separator\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThis is the water separator  that is a direct fit for all AirDog I, AirDog II, and AirDog II-4G models.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCross Reference Numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNAPA: 3616\u003c\/li\u003e\n\n\u003cli\u003eWIX: 33616\u003c\/li\u003e\n\n\u003cli\u003eBaldwin: BF-1275\u003c\/li\u003e\n\n\u003cli\u003eFleetguard: FS19768\u003c\/li\u003e\n\n\u003cli\u003eDonaldson: P550550\u003c\/li\u003e\n\n\u003cli\u003eLuberFiner: LFF9594\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073152802973,"sku":"WS100","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198717856.jpg?v=1713403673"},{"product_id":"bean-machine-multi-function-fuel-tank-sump-280002","title":"Bean Machine Multi Function Fuel Tank Sump","description":"\u003cp\u003e\u003cstrong\u003eNew and Improved Multi-Function Fuel Sump Design\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Beans Diesel Bean Machine Multi-Function Fuel Sump takes the proven single-hole sump design to the next level. Constructed from billet 6061 aluminum, this heavy-duty sump provides improved fuel delivery, simple installation, and versatile plumbing options for a wide range of aftermarket fuel systems.\u003c\/p\u003e\n\n\u003cp\u003eInstallation requires only a single 3\" hole and one mounting bolt, eliminating the need to remove the fuel tank while minimizing potential leak points.\u003c\/p\u003e\n\n\u003ch3\u003eMultiple Configuration Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eSupply and return configuration\u003c\/li\u003e\n\u003cli\u003eSingle outlet operation\u003c\/li\u003e\n\u003cli\u003eDual outlet setup for high-horsepower applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eEliminates common quarter-tank fuel starvation issues\u003c\/li\u003e\n\u003cli\u003eProvides access to nearly all available fuel in the tank\u003c\/li\u003e\n\u003cli\u003eReduces fuel pump strain and operating noise\u003c\/li\u003e\n\u003cli\u003eNo tank removal required during installation\u003c\/li\u003e\n\u003cli\u003eImproves fuel flow for high-output lift pump systems\u003c\/li\u003e\n\u003cli\u003eCompatible with many aftermarket fuel systems, including FASS and AirDog\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eBillet 6061 aluminum construction\u003c\/li\u003e\n\u003cli\u003eOriginal single-hole sump design\u003c\/li\u003e\n\u003cli\u003eSingle-bolt installation for reduced leak potential\u003c\/li\u003e\n\u003cli\u003eRequires only one 3\" hole in the fuel tank\u003c\/li\u003e\n\u003cli\u003eIntegrated sediment bowl helps reduce debris pickup\u003c\/li\u003e\n\u003cli\u003eExclusive O-ring sealing design for leak-free operation\u003c\/li\u003e\n\u003cli\u003eUses ORB fittings instead of pipe-thread fittings\u003c\/li\u003e\n\u003cli\u003eHigh-flow quick-disconnect and push-lock compatible fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel drain plug for future servicing\u003c\/li\u003e\n\u003cli\u003eInner ring design eliminates the need to drop the tank\u003c\/li\u003e\n\u003cli\u003eCompatible with metal and plastic fuel tanks\u003c\/li\u003e\n\u003cli\u003eWorks with gasoline and diesel applications\u003c\/li\u003e\n\u003cli\u003eRequires a minimum 4\" flat mounting area\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in Woodbury, Tennessee, USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Advantages\u003c\/h3\u003e\n\n\u003cp\u003eUnlike traditional draw-straw systems, the Bean Machine Fuel Sump draws fuel directly from the bottom of the tank. This helps reduce restrictions, lower fuel pump noise, and prevent low-fuel starvation issues commonly experienced with top-mounted pickup systems.\u003c\/p\u003e\n\n\u003cp\u003eThe single-hole design also eliminates the need to lower the fuel tank, reducing installation time and simplifying aftermarket fuel system upgrades.\u003c\/p\u003e\n\n\u003ch3\u003eKit Includes\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eSump body\u003c\/li\u003e\n\u003cli\u003eSump \"Pacman\" in-tank backer ring\u003c\/li\u003e\n\u003cli\u003e3\" hole saw\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting bolt\u003c\/li\u003e\n\u003cli\u003eSealing washer\u003c\/li\u003e\n\u003cli\u003eO-ring\u003c\/li\u003e\n\u003cli\u003e(2) -8 ORB to 1\/2\" QDC\/push-lock fittings with O-rings\u003c\/li\u003e\n\u003cli\u003e(1) -8 ORB plug for single-outlet operation\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT stainless steel drain plug fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBuilt for Real-World Durability\u003c\/h3\u003e\n\n\u003cp\u003eThe Bean Machine Fuel Sump has been tested in demanding conditions including towing, off-road use, and severe-duty environments. Its billet construction and proven sealing design deliver reliable performance in both daily-driven and high-performance applications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWatch the durability torture test:\u003c\/strong\u003e\u003cbr\u003e\n\u003ca href=\"https:\/\/www.youtube.com\/watch?v=n_GaBRX6SMY\" target=\"_blank\" rel=\"noopener\"\u003eBeans Diesel Sump Torture Test Video\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWatch the bubble demonstration video:\u003c\/strong\u003e\u003cbr\u003e\n\u003ca href=\"https:\/\/www.youtube.com\/watch?v=_9GbXYBftVA\u0026amp;t=2s\" target=\"_blank\" rel=\"noopener\"\u003eMulti-Function Sump Bubble Test Video\u003c\/a\u003e\u003c\/p\u003e","brand":"Beans Diesel","offers":[{"title":"Default Title","offer_id":45073159520413,"sku":"280002","price":157.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198706723.jpg?v=1713403814"},{"product_id":"oem-fuel-system-contamination-repair-kit-for-11-16-6-7-powerstroke-ec3z-9b246-b","title":"OEM Fuel System Contamination Repair Kit For 11-16 6.7 Powerstroke","description":"\u003cp\u003eThis kit is used to properly service the entire engine fuel system, that contains everything that is to be replaced in cases of contamination.\u003c\/p\u003e\n\n\u003cp\u003eComes with all injectors, steel lines, return line\/harness, fuel pump etc. It does not come with the DCFM or the fuel cooler assembly. Those can be flushed or replaced as necessary.\u003c\/p\u003e","brand":"OEM Ford","offers":[{"title":"Default Title","offer_id":45073458462877,"sku":"EC3Z-9B246-B","price":3650.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198713406.jpg?v=1713404958"},{"product_id":"rudys-dual-o-ring-fuel-tank-sump-kit-w-holesaw-dp0028","title":"Rudy's Dual O-Ring Fuel Tank Sump Kit w\/ Holesaw","description":"\u003cp\u003eFuel Sumps are nothing new these days, you see them everywhere and every company seems to have one. What we have done is step the tank sump up a notch. Made from 6061 Billet aluminum this sump is built like a tank and is super simple to install. While still using a no-tank drop design we have made this sump to where it will install with 1 single bolt with one single 3\" hole in your tank. This means less places to leak and much quicker install.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eBuilt-In Drain Plug\u003c\/li\u003e\n\n\u003cli\u003eDual O-Ring Design\u003c\/li\u003e\n\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\n\u003cli\u003eLarge Opening for Unrestricted Fuel Flow\u003c\/li\u003e\n\n\u003cli\u003eWorks Great With Stock \u0026amp; Aftermarket Fuel Tanks\u003c\/li\u003e\n\n\u003cli\u003e1-Year Warranty\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eNot recommended for off-road applications or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling\u003c\/p\u003e","brand":"Rudy's","offers":[{"title":"Default Title","offer_id":45073511350429,"sku":"DP0028","price":47.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198666338.jpg?v=1713405089"},{"product_id":"alliant-power-fuel-transfer-pump-for-12-15-6-7l-powerstroke-ap63527","title":"Alliant Power Fuel Transfer Pump For 12-15 6.7L Powerstroke","description":"\u003cp\u003e\u003cstrong\u003eAlliant Power Fuel Transfer Pump For 2012-2015 Ford 6.7L Powerstroke\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngines built BEFORE 05\/26\/2015.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eOEM Part Numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"field-item even\"\u003eBC3Z9G282E\u003c\/li\u003e\n\u003cli class=\"field-item odd\"\u003ePFB103\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alliant Power","offers":[{"title":"Default Title","offer_id":45074524274845,"sku":"AP63527","price":971.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198717645.jpg?v=1784753801"},{"product_id":"rudys-fuel-tank-sump-kit-w-integrated-return-holesaw-dp0267","title":"Rudy's Fuel Tank Sump Kit w\/ Integrated Return \u0026 Holesaw","description":"\u003csection class=\"cmp-product-section cmp-product-description open animate--fade-in\" data-scroll=\"\"\u003e\n\u003cdiv class=\"cmp-product-section__inner\"\u003e\n\u003cdiv class=\"cmp-product-description__content\"\u003e\n\u003csection class=\"cmp-product-section cmp-product-description open animate--fade-in\" data-scroll=\"\"\u003e\n\u003cdiv class=\"cmp-product-section__inner\"\u003e\n\u003cdiv class=\"cmp-product-description__content\"\u003e\n\u003cp\u003eThe Rudy's Fuel Tank Sump with Built-In Fuel Return provides you with a perfect option to maximize fuel delivery, and customization when installing your aftermarket fuel system. Avoid the common 1\/4 tank issues associated with in-tank draw straws used with fuel systems such as AirDog, FASS and many others. The Rudy's sump features a one-hole design that only requires drilling a single hole for installation. A machined groove for the o-ring gasket ensures a leak-free seal, and the inner-ring is designed to fit into the bottom of the tank without requiring you to remove it from the truck. We even include a 3\" hole saw for drilling your tank! \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWhat sets this sump apart from the other sumps in the Rudy's lineup is the built-in return. Installation of most aftermarket fuel systems require you to cut and \"tee\" into your factory fuel filler neck. In some cases, modifications to the filler neck can cause leaks, and also cause fuel pumps to \"click off\" when refueling. Using the built-in return port, you can easily route return fuel back to the tank without having to modify any other components for a clean and easy installation. For optimal fuel quality, the Rudy's Sump features a stand pipe that places the returned fuel above the fuel feed. This design eliminates the possibility of feeding your engine the aerated return fuel coming back to your fuel tank. Includes barbed fittings for 1\/2\" hose. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-In Fuel Return \u003c\/li\u003e\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\u003cli\u003eStand Pipe Separates Return Fuel \u0026amp; Feed\u003c\/li\u003e\n\u003cli\u003e3\" Hole Saw Included For Easy Installation\u003c\/li\u003e\n\u003cli\u003eMade From Aircraft Grade T6 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eWorks Great With Stock \u0026amp; Aftermarket Fuel Tanks \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Not recommended for off-road s or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eUniversal - Cutting Required\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"cmp-product-section cmp-product-specification animate--fade-in\" data-scroll=\"\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"cmp-product-section cmp-product-specification animate--fade-in\" data-scroll=\"\"\u003e\u003c\/section\u003e","brand":"Rudy's","offers":[{"title":"Default Title","offer_id":45074701582493,"sku":"DP0267","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198713402.jpg?v=1713408921"},{"product_id":"oem-fuel-system-contamination-repair-kit-for-17-19-6-7-powerstroke-hc3z-9b246-b","title":"OEM Fuel System Contamination Repair Kit For 17-19 6.7 Powerstroke","description":"\u003cp\u003eThis kit is used to properly service the entire engine fuel system, that contains everything that is to be replaced in cases of contamination.\u003c\/p\u003e\n\n\u003cp\u003eComes with all injectors, steel lines, return line\/harness, fuel pump etc. It does not come with the DCFM or the fuel cooler assembly. Those can be flushed or replaced as necessary.\u003c\/p\u003e","brand":"OEM Ford","offers":[{"title":"Default Title","offer_id":45074773016733,"sku":"HC3Z-9B246-B","price":5495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198713408.jpg?v=1713409458"},{"product_id":"bean-machine-micro-fuel-sump-280032","title":"Bean Machine Micro Fuel Sump","description":"\u003cp\u003eThe \u003cstrong\u003eBeans Diesel Bean Machine Micro Fuel Sump\u003c\/strong\u003e delivers the same proven performance and quality as the original Beans Diesel fuel sump in a more compact, budget-friendly design. Manufactured from billet 6061 aluminum, the Micro Sump features a simple one-bolt, one-hole installation that eliminates the need to drop the fuel tank.\u003c\/p\u003e\n\n\u003cp\u003eDesigned for use with aftermarket fuel systems such as FASS and AirDog, the Micro Sump improves fuel delivery, reduces pump strain, and helps eliminate common quarter-tank fuel starvation issues associated with traditional draw straw installations.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe Micro Sump can also be used as a fuel return.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eEliminates quarter-tank fuel starvation issues\u003c\/li\u003e\n\u003cli\u003eAllows use of nearly the entire fuel tank capacity\u003c\/li\u003e\n\u003cli\u003eReduces fuel pump strain and operating noise\u003c\/li\u003e\n\u003cli\u003eNo tank removal required for installation\u003c\/li\u003e\n\u003cli\u003eCompatible with high-flow lift pump systems\u003c\/li\u003e\n\u003cli\u003eSuitable for fuel supply or fuel return applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eMade from billet 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eSingle-bolt, single-hole installation design\u003c\/li\u003e\n\u003cli\u003eRequires only a 1-1\/2\" hole in the tank\u003c\/li\u003e\n\u003cli\u003eOne-piece machined billet construction\u003c\/li\u003e\n\u003cli\u003eExclusive no-leak O-ring sealing design\u003c\/li\u003e\n\u003cli\u003eStainless steel installation hardware included\u003c\/li\u003e\n\u003cli\u003eIntegrated standpipe helps reduce sediment pickup\u003c\/li\u003e\n\u003cli\u003eInner ring design eliminates the need to drop the fuel tank\u003c\/li\u003e\n\u003cli\u003eCompatible with metal or plastic fuel tanks\u003c\/li\u003e\n\u003cli\u003eRequires a minimum 3\" flat mounting area\u003c\/li\u003e\n\u003cli\u003eCompatible with gasoline or diesel applications\u003c\/li\u003e\n\u003cli\u003eInstalls in minutes\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Choose a Fuel Sump?\u003c\/h3\u003e\n\n\u003cp\u003eMany aftermarket fuel systems use draw straws that pull fuel from the top of the tank. These systems can experience fuel starvation below a quarter tank, increased pump noise, and restricted fuel flow.\u003c\/p\u003e\n\n\u003cp\u003eThe Bean Machine Micro Sump draws fuel directly from the bottom of the tank, improving fuel delivery while reducing pump strain and helping eliminate common low-fuel issues.\u003c\/p\u003e\n\n\u003ch3\u003eBuilt for Real-World Use\u003c\/h3\u003e\n\n\u003cp\u003eThe original Beans Diesel one-hole fuel sump design has been proven in daily-driven trucks, towing applications, off-road environments, and severe-duty conditions. Its billet construction and leak-resistant design provide long-term durability even in demanding environments.\u003c\/p\u003e\n\n\u003ch3\u003eKit Includes\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eMicro Sump body\u003c\/li\u003e\n\u003cli\u003eSump Pacman\u003c\/li\u003e\n\u003cli\u003eStainless steel bolt\u003c\/li\u003e\n\u003cli\u003eSealing washer\u003c\/li\u003e\n\u003cli\u003eO-ring\u003c\/li\u003e\n\u003cli\u003e8 ORB to 1\/2\" push-lock fitting with O-ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eRequires a 1-1\/2\" hole saw (not included)\u003c\/li\u003e\n\u003cli\u003eHole saw and tank drain are not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/n_GaBRX6SMY\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Beans Diesel","offers":[{"title":"Default Title","offer_id":45075058851997,"sku":"280032","price":79.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198719270.jpg?v=1713411562"},{"product_id":"bean-machine-universal-multi-function-fuel-tank-sump-kit-280003","title":"Bean Machine Universal Multi Function Fuel Tank Sump Kit","description":"\u003cp\u003e\u003cstrong\u003eBean Machine Universal Multi Function Fuel Tank Sump\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eWhat they have done at Beans Diesel\/Bean Machine is step up the tank sump another notch. Made from 6061 Billet aluminum, this guy is built like a tank and is super simple to install. Just like Beans original and revolutionary design, install is as easy as it gets, requiring a single 3\" hole and a single bolt. This means super easy and quick install time as well as minimal places to develop a leak. Bean's is not the only sump manufacturer on the market, but if you do purchase theirs you will be purchasing a 100% USA manufactured product from the company that invented the single hole design sump!\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eAll of Bean's tank sumps come with a 3\" hole saw and all the fittings you will need, (so no extra trips to the hardware store), as well as all stainless or aluminum hardware. The single O-ring design creates the perfect seal insuring you have zero leaks. Bean's manufacture the only tank sump on the market that uses O-ring Boss style fittings instead of a pipe thread style fitting. This means less possibility for leaks and a perfect seal. Their fittings can be used with a quick disconnect fitting (found on many aftermarket fuel systems) or 1\/2\" push-lock style fuel hose. That means it is going to be plug and play for the largest percentage of aftermarket fuel systems out there! They even include a plug if you only need a single outlet style sump.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUses all available fuel from the tank. No issues with sucking air when below 1\/8th of a tank. Perfect for use with today's high flow lift pump systems. (Airdog, FASS, etc)\u003c\/li\u003e\n\n\u003cli\u003eSediment bowl area machined inside of the sump to reduce the amount of sediments that get to your filter system.\u003c\/li\u003e\n\n\u003cli\u003eStainless Drain Plug for future tank servicing or sediment draining.\u003c\/li\u003e\n\n\u003cli\u003eSingle bolt design that allows for 5 minute install. A single bolt offers less chances for leaks than tanks sumps using multiple bolts drilled into the tank.\u003c\/li\u003e\n\n\u003cli\u003eStainless Steel hardware, High Flow aluminum Quick Disconnect\/pushlock fittings, and a -8 ORB Plug are provided in the kit.\u003c\/li\u003e\n\n\u003cli\u003eComes with 3” hole saw to make the only hole needed in your tank for install.\u003c\/li\u003e\n\n\u003cli\u003eInner ring designed to go through the 3” hole so tank does not need to be dropped.\u003c\/li\u003e\n\n\u003cli\u003eO-ring design for a perfect seal.\u003c\/li\u003e\n\n\u003cli\u003eSuper strong 1 piece machined billet design.\u003c\/li\u003e\n\n\u003cli\u003eCan be installed on any fuel tank with an available 4” diameter flat area\u003c\/li\u003e\n\n\u003cli\u003eSupporting the Company that Invented the Single Hole Design Sump!\u003c\/li\u003e\n\n\u003cli\u003eCan be used on metal or plastic tanks\u003c\/li\u003e\n\n\u003cli\u003eWorks on gas or diesel applications\u003c\/li\u003e\n\n\u003cli\u003eDESIGNED AND MANUFACTURED IN WOODBURY,TN USA!!!\u003cbr\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eSump Body\u003c\/li\u003e\n\n\u003cli\u003eSump \"Pacman\" in Tank Backer Ring\u003c\/li\u003e\n\n\u003cli\u003e3\" Hole Saw (Plastic Tank Only. If Installing On Metal Tank You Will Need To Purchase A Metal Hole Saw)\u003c\/li\u003e\n\n\u003cli\u003eStainless Steel Bolt\u003c\/li\u003e\n\n\u003cli\u003eSealing Washer\u003c\/li\u003e\n\n\u003cli\u003eO-Ring\u003c\/li\u003e\n\n\u003cli\u003e(2) -8 O-Ring Boss (ORB) to 1\/2\" QDC\/Push-lock Fittings\u003c\/li\u003e\n\n\u003cli\u003e(1) -8 O-Ring Boss (ORB) 1\/2\" Plug For Single Outlet Operation\u003c\/li\u003e\n\n\u003cli\u003e(1) -8 O-Ring Boss (ORB) to 5\/8\" QDC\/Push-lock Fitting\u003c\/li\u003e\n\n\u003cli\u003e(1) -8 O-Ring Boss (ORB) to 3\/8\" QDC\/Push-lock Fitting\u003c\/li\u003e\n\n\u003cli\u003e(1) 5\/16' Plug\u003c\/li\u003e\n\n\u003cli\u003e(1) 3\/8\" Plug\u003c\/li\u003e\n\n\u003cli\u003e(1) 1\/2\" Plug\u003c\/li\u003e\n\n\u003cli\u003e(3) O-Rings For the Fittings\u003c\/li\u003e\n\n\u003cli\u003e1\/4\" NPT Stainless Steel Drain Plug Fitting\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/n_GaBRX6SMY\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e \u003ciframe src=\"\/\/www.youtube.com\/embed\/_9GbXYBftVA\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Beans Diesel","offers":[{"title":"Default Title","offer_id":45075074908317,"sku":"280003","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198719614.jpg?v=1713411701"},{"product_id":"s-s-gen2-1-disaster-prevention-return-filter-assembly","title":"S\u0026S Gen2.1 Disaster Prevention \u0026 Return Filter Assembly Kit for 2011-2027 Ford 6.7L Powerstroke Diesel","description":"\u003cp\u003eS\u0026amp;S Diesel Motorsport, the creator of the original Disaster Prevention Kit for the 6.7 Power Stroke, is at it again with a much-improved second generation kit. Since its debut in 2016, the original S\u0026amp;S 6.7L Power Stroke CP4 Bypass Kit (Disaster Prevention Kit) has safeguarded thousands of injectors from CP4 debris. In fact, it works so well that it has been copied by multiple opportunists within the aftermarket. Being a company founded by fuel system engineers, S\u0026amp;S Diesel Motorsport has the ability, and responsibility, to offer the best solutions to fuel system problems. While the original bypass kit offers really good protection from a CP4 failure, the last four years have given the S\u0026amp;S engineers plenty of time to discover and eliminate potential problems.\u003c\/p\u003e\n\u003cp\u003eThe S\u0026amp;S Diesel Motorsport Gen2.1 6.7L Power Stroke CP4 Bypass Kit features all quick connect lines that will eliminate the need for cutting the factory supply line, which is a debris introduction point, especially if the cut is not thoroughly deburred. It also eliminates the need to use a compression fitting, which is a potential leak point. The OE-style quick connect lines also eliminate any threaded joints that are further leak points and have the potential of generating debris during install.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003e2011+ compatibility\u003c\/li\u003e\n\u003cli\u003eAll OE-style quick connects\u003c\/li\u003e\n\u003cli\u003eClear filter bowl for inspection\u003c\/li\u003e\n\u003cli\u003e9-micron (at 99% efficiency) return filter\u003c\/li\u003e\n\u003cli\u003eNew and improved Disaster Prevention Kit\u003c\/li\u003e\n\u003cli\u003eFuel supply split-off 25 inches away from the CP4 pump\u003c\/li\u003e\n\u003cli\u003eSafeguards fuel injectors, rails, lines, and tank from CP4 debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2011+ Ford F-250\/F-350\/F-450\/F-550 6.7L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFitment of aftermarket items may interfere with placement of return filter.\u003c\/li\u003e\n\u003cli\u003eCARB EO #D-756-6\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45075424903325,"sku":"CP4-6.7F-BP-G2.1","price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198757336.jpg?v=1713415188"},{"product_id":"rudys-mini-fuel-tank-sump-kit-w-integrated-return-holesaw-dp0267-mini","title":"Rudy's Mini Fuel Tank Sump Kit w\/ Holesaw","description":"\u003cp\u003eThe Rudy's Mini Fuel Tank Sump provides you with a perfect option to maximize fuel delivery, and customization when installing your aftermarket fuel system. The Mini Design allows for a more versatile mounting locations.  Avoid the common 1\/4 tank issues associated with in-tank draw straws used with fuel systems such as AirDog, FASS and many others. The Rudy's mini sump features a one-hole design that only requires drilling a single hole for installation. A machined groove for the o-ring gasket ensures a leak-free seal, and the o-ring is designed to fit onto the bottom of the tank without requiring you to remove it from the truck. We even include a 2\" hole saw for drilling your tank!\u003c\/p\u003e\n\u003cp\u003eIncludes barbed fittings for 1\/2\" \u0026amp; 5\/8\" hose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-In Fuel Return\u003c\/li\u003e\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\u003cli\u003eSmall design for easier mounting\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2\" Hole Saw Included For Easy Installation\u003c\/li\u003e\n\u003cli\u003eMade From Aircraft Grade T6 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eWorks Great With Stock \u0026amp; Aftermarket Fuel Tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal - Cutting Required \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNot recommended for off-road applications or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Rudy's","offers":[{"title":"Default Title","offer_id":45075475792029,"sku":"DP0267-Mini","price":89.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/267.png?v=1726686088"},{"product_id":"airdog-ii-5g-diaphragm-regulated-fuel-pump-kit-for-11-16-ford-6-7l-powerstroke-a7sabf589","title":"AirDog II 5G Diaphragm Regulated Fuel Pump Kit For 11-16 Ford 6.7L Powerstroke","description":"\u003cp\u003eAn industry first! The AirDog® II-5G is the first diesel Fuel Air Separation System to include an integrated diaphragm fuel pressure regulator. This regulator allows for more fuel pressure adjustability, offers better fuel flow at pressure, and can be boost compensated! This system has larger porting to allow less cavitation and noise at the inlet of the higher flowing 220GPH pumps. All AirDog II-5G systems come with improved wiring harnesses and connectors as well! The wiring harness is now 12ga from the battery all the way to the internal connections in the motor. A Metri-Pack 280 connector replaces the Deutch 2 pin connector which allows more more current flow without creating excessive heat. All other connectors in the harness are weather pack to keep the elements out. This system has the same 4G motor technology that has proven itself to be a reliable, quiet operating system. It also retains the \"Demand Flow\" of the older AirDog II variants. Demand Flow means whatever fuel the injection system does not consume gets recirculated back through the filter base.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eLifetime Warranty\u003c\/li\u003e\n\n\u003cli\u003eLarger Ports Over Previous Pumps\u003c\/li\u003e\n\n\u003cli\u003eDiaphragm Fuel Pressure Regulator\u003c\/li\u003e\n\n\u003cli\u003eDemand Flow Design\u003c\/li\u003e\n\n\u003cli\u003eAdjustable From 7-70 PSI\u003c\/li\u003e\n\n\u003cli\u003eIncreased Fuel Economy\u003c\/li\u003e\n\n\u003cli\u003eIncreased Horsepower \u0026amp; Torque Output\u003c\/li\u003e\n\n\u003cli\u003eIncreased Injection Pump Life\u003c\/li\u003e\n\n\u003cli\u003eLonger Injector Life\u003c\/li\u003e\n\n\u003cli\u003eImproved Throttle Response\u003c\/li\u003e\n\n\u003cli\u003eReduced Exhaust Emissions\u003c\/li\u003e\n\n\u003cli\u003eIncreased Fuel Flow Rates\u003c\/li\u003e\n\n\u003cli\u003eRemoves Air\/Vapor from Diesel Fuel\u003c\/li\u003e\n\n\u003cli\u003eComplete Installation Kit and Detailed Instructions\u003c\/li\u003e\n\n\u003cli\u003e1\/2\" Fuel Lines with OEM-Style Quick Connect Fittings\u003c\/li\u003e\n\n\u003cli\u003e4 Bearing Motor with Intermediate Shaft For Reduced Pump Noise\u003c\/li\u003e\n\n\u003cli\u003eThis Is A Complete Kit – Includes Pump \u0026amp; All Needed Mounting Hardware\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2011-2016 Ford F-250\/F-350 6.7L Powerstroke \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eWe recommend installing the AirDog® on the inside of the frame rail, but we understand some applications just don’t have the room.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45075988971677,"sku":"A7SABF589","price":855.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198748719.png?v=1713418679"},{"product_id":"airdog-150-gph-lift-pump-fuel-bowl-bypass-sump-for-2001-2010-gm-6-6l-duramax-a4spbc188-dp0056-dp0028","title":"AirDog 150 GPH Lift Pump\/Fuel Bowl Bypass\/Sump For 2001-2010 GM 6.6L Duramax","description":"\u003cp\u003eThe PureFlow AirDog 150GPH Air\/Fuel Separation System for your 2001-2010 GM 6.6L Duramax provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel. The AirDog is lift pump and filter system, that enhances the fuel delivery to your engine with a commercial duty system.\u003c\/p\u003e\n\n\u003cp\u003eYour High Performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air\/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air\/vapor can cause galling and pitting of the injector barrel\/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time!\u003c\/p\u003e\n\n\u003cp\u003eThe Airdog works by pulling fuel from the fuel tank containing entrained air\/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air\/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air\/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation.\u003c\/p\u003e\n\n\u003cp\u003eThe Rudy's Duramax Fuel Filter Delete for your 2001-2016 GM 6.6L Duramax is for use after the installation of an AirDog or FASS Fuel Air Separation System. Once installed the factory fuel filter is no longer needed and can be easily removed by using this factory fuel filter canister delete. Because your Duramax fuel filter is located after the AirDog or FASS filtration system you will still need to replace the factory filter every 5,000-8,000 miles. This filter delete kit will replace your now useless fuel filter with a spin on canister that will allow fuel to flow freely into the engine, saving you even more money. This spin on fuel filter delete kit is a perfect addition to your AirDog or FASS Titanium diesel fuel pump and comes with all required hardware for a professional installation.\u003c\/p\u003e\n\n\u003cp\u003eFuel Sumps are nothing new these days, you see them everywhere and every company seems to have one. What we have done is step the tank sump up a notch. Made from 6061 Billet aluminum this sump is built like a tank and is super simple to install. While still using a no-tank drop design we have made this sump to where it will install with 1 single bolt with one single 3\" hole in your tank. This means less places to leak and much quicker install.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eSmall \u0026amp; Compact\u003c\/li\u003e\n\n\u003cli\u003eDual Feed Gerotor Pump\u003c\/li\u003e\n\n\u003cli\u003eLow Amperage Motor for Efficiency and Endurance\u003c\/li\u003e\n\n\u003cli\u003eSelf-aligning Motor for Less Maintenance \u0026amp; Less Noise\u003c\/li\u003e\n\n\u003cli\u003eIntermediate Pump Shaft to Separate the Motor from Fuel\u003c\/li\u003e\n\n\u003cli\u003eQuick Connect Components\u003c\/li\u003e\n\n\u003cli\u003eFlow Rate of 150 GPH\u003c\/li\u003e\n\n\u003cli\u003eMounts to Frame\u003c\/li\u003e\n\n\u003cli\u003eRetains WIF (Water In Fuel) Sensor\u003c\/li\u003e\n\n\u003cli\u003eInstalls In Place Of Stock Filter\u003c\/li\u003e\n\n\u003cli\u003eAllows For Unrestricted Fuel Flow To Engine\u003c\/li\u003e\n\n\u003cli\u003eBuilt-In Drain Plug\u003c\/li\u003e\n\n\u003cli\u003eDual O-Ring Design\u003c\/li\u003e\n\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2001-2010 Chevrolet Silverado 2500HD\/3500HD 6.6L Duramax LB7\/LLY\/LBZ\/LMM\u003c\/li\u003e\n\n\u003cli\u003e2001-2010 GMC Sierra 2500HD\/3500HD 6.6L Duramax LB7\/LLY\/LBZ\/LMM\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAirdog comes with Limited Lifetime Warranty, when registered properly\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45076116504733,"sku":"A4SPBC188 | DP0056 | DP0028","price":868.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198753509.jpg?v=1713420038"},{"product_id":"purepower-fuel-injector-cylinders-3-4-5-6-for-2015-2019-ford-6-7l-powerstroke","title":"PurePower Fuel Injector Cylinders 3-4-5-6 For 2015-2019 Ford 6.7L Powerstroke","description":"\u003cp\u003ePurePower Remanufactured Fuel Injectors are designed as a direct replacement for your failed factory injector. Each remanufactured fuel injector is built to the highest standards that meet or exceed the OE specifications for factory quality, reliability, and performance. Rigorous final testing checks delivery, leakage, and opening characteristics to ensure flawless operation of each fuel injector. PurePower Technologies is an industry leading supplier to both the OEM and aftermarket industry.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eStock HP Rating \u0026amp; Flow\u003c\/li\u003e\n\n\u003cli\u003eRemanufactured Fuel Injector\u003c\/li\u003e\n\n\u003cli\u003eMeets Or Exceeds OE Specs\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2015-2019 6.7L Powerstroke Diesel\u003c\/li\u003e\n\n\u003cli\u003eCylinder 3-4-5-6 Only\u003c\/li\u003e\n\n\u003cli\u003eIndividual Injector\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2 Years\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"PurePower Technologies","offers":[{"title":"Default Title","offer_id":45076198916253,"sku":"7781-PP","price":231.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198770236.jpg?v=1713422647"},{"product_id":"purepower-fuel-injector-cylinders-1-2-7-8-for-2015-2019-ford-6-7l-powerstroke","title":"PurePower Fuel Injector Cylinders 1-2-7-8 For 2015-2019 Ford 6.7L Powerstroke","description":"\u003cp\u003ePurePower Remanufactured Fuel Injectors are designed as a direct replacement for your failed factory injector. Each remanufactured fuel injector is built to the highest standards that meet or exceed the OE specifications for factory quality, reliability, and performance. Rigorous final testing checks delivery, leakage, and opening characteristics to ensure flawless operation of each fuel injector. PurePower Technologies is an industry leading supplier to both the OEM and aftermarket industry.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eStock HP Rating \u0026amp; Flow\u003c\/li\u003e\n\n\u003cli\u003eRemanufactured Fuel Injector\u003c\/li\u003e\n\n\u003cli\u003eMeets Or Exceeds OE Specs\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2015-2019 6.7L Powerstroke Diesel\u003c\/li\u003e\n\n\u003cli\u003eCylinder 1-2-7-8 Only\u003c\/li\u003e\n\n\u003cli\u003eIndividual Injector\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2 Years\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"PurePower Technologies","offers":[{"title":"Default Title","offer_id":45076199080093,"sku":"7780-PP","price":231.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198770244.jpg?v=1713422652"},{"product_id":"xdp-remanufactured-cp3-fuel-pump-for-2003-2007-dodge-5-9l-cummins-xd520","title":"XDP Remanufactured CP3 Fuel Pump For 2003-2007 Dodge 5.9L Cummins","description":"\u003cdiv\u003eThe XDP Remanufactured CP3 Fuel Pump XD520 will replace the underperforming high-pressure pump in your 2003-2007 Dodge 5.9L Cummins. A poorly functioning or bad pump can cause a loss of power or potentially leave you on the side of the road. This CP3 pump will help get your truck back on the road and running as it should. Each pump is assembled using the highest quality components and is built to meet or exceed the stringent factory specifications. All pumps are end-of-line tested to ensure a long service life and include a 2-year warranty for peace of mind. \u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cbr\u003e\n\n\u003cdiv\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eRemanufactured CP3 Pump \u003c\/li\u003e\n\n\u003cli\u003eMeets or Exceeds OE Specifications \u003c\/li\u003e\n\n\u003cli\u003eEnd-Of-Line Testing To Ensure Quality \u003c\/li\u003e\n\n\u003cli\u003eAssembled With High-Quality Components \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan data-sheets-value=\"{\" dodge cummins data-sheets-userformat=\"{\"\u003e2003-2007 Dodge 5.9L Cummins\u003c\/span\u003e\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan data-sheets-value=\"{\" remanufactured cp3 fuel pump xd520 data-sheets-userformat=\"{\"\u003eXDP Remanufactured CP3 Fuel Pump XD520\u003c\/span\u003e\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"XDP","offers":[{"title":"Default Title","offer_id":45078831104157,"sku":"XD520","price":725.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198806957.jpg?v=1713430429"},{"product_id":"precision-parts-billet-aluminum-diesel-sump-with-integrated-return-for-cummins-duramax-powerstroke-dp0477","title":"Precision Parts Billet Aluminum Diesel Sump with Integrated Return For Cummins Duramax Powerstroke","description":"\u003csection data-scroll=\"\" class=\"cmp-product-section cmp-product-description open animate--fade-in\"\u003e\n\u003cdiv class=\"cmp-product-section__inner\"\u003e\n\u003cdiv class=\"cmp-product-description__content\"\u003e\n\u003csection data-scroll=\"\" class=\"cmp-product-section cmp-product-description open animate--fade-in\"\u003e\n\u003cdiv class=\"cmp-product-section__inner\"\u003e\n\u003cdiv class=\"cmp-product-description__content\"\u003e\n\u003cp\u003eThe Precision Parts Billet Fuel Tank Sump with a built-in fuel return is the superior choice for optimizing fuel delivery and facilitating seamless customization when integrating your aftermarket fuel system. Say goodbye to the common 1\/4 tank issues associated with in-tank draw straws used in systems like AirDog and FASS. Our billet sump boasts a one-hole design, simplifying installation with only a single hole to drill.\u003c\/p\u003e\n\u003cp\u003eCrafted with precision, the Precision Parts billet sump features a machined groove for the o-ring gasket, ensuring a leak-free seal. The inner-ring is thoughtfully designed to fit snugly into the tank without necessitating removal from the truck. As part of our commitment to convenience, we even include a hole saw for effortless tank drilling!\u003c\/p\u003e\n\u003cp\u003eWhat sets this sump apart from others in the Precision Parts lineup is its innovative built-in return. Unlike traditional aftermarket fuel systems that may require cutting and \"teeing\" into the factory fuel filler neck, our design eliminates this need. By utilizing the built-in return port, you can effortlessly route return fuel back to the tank without modifying other components, ensuring a clean and straightforward installation.\u003c\/p\u003e\n\u003cp\u003eFor superior fuel quality, the Precision Parts Sump incorporates a stand pipe that positions the returned fuel above the fuel feed. This ingenious design prevents the possibility of feeding your engine aerated return fuel, enhancing overall performance. The package includes barbed fittings for 1\/2\" hose, adding to the versatility of this top-tier sump.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-In Fuel Return\u003c\/li\u003e\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\u003cli\u003eStand Pipe Separates Return Fuel \u0026amp; Feed\u003c\/li\u003e\n\u003cli\u003eCrafted From Aircraft Grade T6 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eCompatible with Stock \u0026amp; Aftermarket Fuel Tanks\u003c\/li\u003e\n\u003cli\u003e1\/4 NPT Drain - Should You Need To Drain Your Tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"b-desc\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Precision Parts Billet Sump\u003c\/li\u003e\n\u003cli\u003e1 x Holesaw\u003c\/li\u003e\n\u003cli\u003e2 x Mounting Bolts\u003c\/li\u003e\n\u003cli\u003e1 x Drain Plug \u003c\/li\u003e\n\u003cli\u003e2 x Washers\u003c\/li\u003e\n\u003cli\u003e1 x O-ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"b-desc\"\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal - Cutting Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cdiv class=\"b-desc\"\u003e\n\u003cstrong\u003eNote: \u003c\/strong\u003eWhile this sump is ideal for a wide range of applications, it is not recommended for off-road use or vehicles with potential ground clearance issues. Exercise extra caution to ensure the fuel tank is free of debris after drilling.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection data-scroll=\"\" class=\"cmp-product-section cmp-product-specification animate--fade-in\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection data-scroll=\"\" class=\"cmp-product-section cmp-product-specification animate--fade-in\"\u003e\u003c\/section\u003e","brand":"Precision Parts","offers":[{"title":"Default Title","offer_id":45082661453981,"sku":"DP0477","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198823669.png?v=1713437419"},{"product_id":"ss-diesel-motorsport-2020-2022-6-7l-ford-powerstroke-cp4-to-dcr-conversion-kit-6-7f-dcr","title":"S\u0026S Diesel Motorsport 2011-2024 6.7L Ford Powerstroke CP4 to DCR Conversion Kit","description":"\u003cp\u003eThe CP4 high-pressure fuel pump in 2011-2024 Ford Super Duty diesel trucks has a well-earned reputation for failing without warning, creating sudden power loss, and taking out the expensive high-pressure fuel system in the process. Despite having to deal with being broken down on the side of the road, truck owners will be facing fuel system repairs that can easily exceed $10,000. The unreliable reputation is supported by recalls and lawsuits leveled at various auto manufacturers that use the CP4 in their production vehicles.\u003c\/p\u003e\n\u003cp\u003eS\u0026amp;S Diesel Motorsport™, the common rail diesel injection experts, teamed up with PurePower Technologies, Inc.®, the aftermarket division of longstanding fuel system manufacturer, Stanadyne®, to do the impossible. Collectively, they solved the widely-known CP4 fuel pump problem plaguing Ford Super Duty trucks using the 6.7L Power Stroke diesel engine.\u003c\/p\u003e\n\u003cp\u003eThe joint S\u0026amp;S Diesel Motorsport and PurePower engineering team has changed the game by developing a more durable plug-and-play-replacement pump, with OE fit and function, for the CP4.\u003c\/p\u003e\n\u003cp\u003eWith a price of $2,400.00 USD, the S\u0026amp;S Diesel Motorsport Ford 6.7L CP4 to DCR Pump Conversion can save Ford truck owners $10,000 to $15,000 in repairs. Owners can install peace of mind knowing their daily workhorse isn’t going to lay down on them.\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\u003cli\u003eOE-Style Quick Connects\u003c\/li\u003e\n\u003cli\u003eBrand new PurePower DCR Pump\u003c\/li\u003e\n\u003cli\u003eIncludes all fuel lines and hardware\u003c\/li\u003e\n\u003cli\u003eCan save Ford 6.7 truck owners $10,000 to $15,000 in fuel system repairs \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2011-2024 Ford F-250\/F-350\/F-450\/F-550\/F-650\/F-750 6.7L Powerstroke Diesel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eNo Tuning Required\u003c\/p\u003e\n\u003ciframe height=\"315\" width=\"560\" src=\"https:\/\/www.youtube.com\/embed\/hNXIH-JNg30\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082668728477,"sku":"6.7F-DCR-1","price":2400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/6.7F-DCR-1_ebe064de-27f7-4939-b2f2-087fbba0a5a6.jpg?v=1790779539"},{"product_id":"hs-motorsports-lower-fuel-filter-upgrade-kit-for-23-24-ford-6-7l-power-stroke-121010","title":"HS-Motorsports Lower Fuel Filter Upgrade Kit For 23-25 Ford 6.7L Power-Stroke","description":"\u003cp\u003e2023-2025 Ford 6.7L Power Stroke Lower Fuel Filter Upgrade Kit\u003cbr\u003eThis kit converts the 2023-2025 6.7 Ford Power Stroke Diesel fuel-tank-mounted (lower) fuel filter to a superior screw-on style Advanced Efficiency CAT or Baldwin water-separating fuel filter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMetal Drain valve on the fuel filter.\u003c\/li\u003e\n\u003cli\u003eNo more dealing with broken factory plastic drain valves and factory plastic fuel filter housings!\u003c\/li\u003e\n\u003cli\u003eNo more messy fuel filter changes.\u003c\/li\u003e\n\u003cli\u003eCheaper and much quicker fuel filter changes.\u003c\/li\u003e\n\u003cli\u003eHigh-quality, patent-pending HSM billet filter plate.\u003c\/li\u003e\n\u003cli\u003eHigh-quality hoses, fittings, and hardware.\u003c\/li\u003e\n\u003cli\u003eFuel Filter\/Water Separator.\u003c\/li\u003e\n\u003cli\u003eEasy kit installation.\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2023-2025 Ford 6.7L Power Stroke\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"H\u0026S Motorsports","offers":[{"title":"Default Title","offer_id":45082718109853,"sku":"121010","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198826041.jpg?v=1713438562"},{"product_id":"hs-motorsports-lower-fuel-filter-upgrade-kit-for-23-24-ford-6-7l-power-stroke-121010-at","title":"HS-Motorsports Lower Fuel Filter Upgrade Kit For 23-25 Ford 6.7L Power Stroke","description":"\u003cp\u003e2023-2025 Ford 6.7L Power Stroke Lower Fuel Filter Upgrade Kit\u003cbr\u003eThis kit converts the 2023-2025 6.7 Ford Power Stroke Diesel fuel-tank-mounted (lower) fuel filter to a superior screw-on style Advanced Efficiency CAT or Baldwin water-separating fuel filter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMetal Drain valve on the fuel filter.\u003c\/li\u003e\n\u003cli\u003eNo more dealing with broken factory plastic drain valves and factory plastic fuel filter housings!\u003c\/li\u003e\n\u003cli\u003eNo more messy fuel filter changes.\u003c\/li\u003e\n\u003cli\u003eCheaper and much quicker fuel filter changes.\u003c\/li\u003e\n\u003cli\u003eHigh-quality, patent-pending HSM billet filter plate.\u003c\/li\u003e\n\u003cli\u003eHigh-quality hoses, fittings, and hardware.\u003c\/li\u003e\n\u003cli\u003eFuel Filter\/Water Separator.\u003c\/li\u003e\n\u003cli\u003eEasy kit installation.\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2023-2025 Ford 6.7L Power Stroke\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"H\u0026S Motorsports","offers":[{"title":"Default Title","offer_id":45082718142621,"sku":"121010-AT","price":539.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198826045.jpg?v=1713438564"},{"product_id":"hs-motorsports-lower-fuel-filter-upgrade-kit-for-23-24-ford-6-7l-power-stroke-121011","title":"HS Motorsports Lower Fuel Filter Upgrade Kit For 23-25 Ford 6.7L Power Stroke","description":"\u003cp\u003e2023-2025 Ford 6.7L Power Stroke Lower Fuel Filter Upgrade Kit\u003cbr\u003eThis kit converts the 2023-2025 6.7 Ford Power Stroke Diesel fuel-tank-mounted (lower) fuel filter to a superior screw-on style Advanced Efficiency CAT or Baldwin water-separating fuel filter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMetal Drain valve on the fuel filter.\u003c\/li\u003e\n\u003cli\u003eNo more dealing with broken factory plastic drain valves and factory plastic fuel filter housings!\u003c\/li\u003e\n\u003cli\u003eNo more messy fuel filter changes.\u003c\/li\u003e\n\u003cli\u003eCheaper and much quicker fuel filter changes.\u003c\/li\u003e\n\u003cli\u003eHigh-quality, patent-pending HSM billet filter plate.\u003c\/li\u003e\n\u003cli\u003eHigh-quality hoses, fittings, and hardware.\u003c\/li\u003e\n\u003cli\u003eFuel Filter\/Water Separator.\u003c\/li\u003e\n\u003cli\u003eEasy kit installation.\u003c\/li\u003e\n\u003cli\u003eMade in the U.S.A!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2023-2025 Ford 6.7L Power Stroke\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"H\u0026S Motorsports","offers":[{"title":"Default Title","offer_id":45082718339229,"sku":"121011","price":539.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198826053.jpg?v=1713438567"},{"product_id":"hs-motorsports-upper-fuel-filter-relocation-kit-for-11-16-ford-6-7l-power-stroke-121012","title":"HS-Motorsports Upper Fuel Filter Relocation Kit For 11-16 Ford 6.7L Power Stroke","description":"\u003cp\u003eWe all share a passion for our 2011-2016 6.7L Power Strokes, but let's face it, they come straight from the factory with an abundance of troublesome plastic components. Ford, unfortunately, tends to overcomplicate what should be straightforward maintenance procedures. That's where we come in.\u003c\/p\u003e\n\n\u003cp\u003eOur meticulously crafted kit is designed to revolutionize your 2011-2016 6.7L Power Stroke experience. It includes everything necessary to replace that inconveniently located under-the-hood fuel filter with our precision-engineered fuel filter relocation kit. We also swap out the fuel filter itself with a top-of-the-line, screw-on style Baldwin fuel filter.\u003c\/p\u003e\n\n\u003cp\u003eNot only does this kit relocate your filter to a more accessible and user-friendly location under the truck, but it also enhances filtration efficiency, outperforming the factory setup. Say goodbye to that frustrating plastic filter housing and welcome a logical, easy-to-maintain solution that can be installed in under 30 minutes.\u003c\/p\u003e\n\n\u003cp\u003eUpgrade your Power Stroke with the \"Upper Fuel Filter Relocation Kit\" today and experience the difference in both convenience and performance. Don't settle for factory complexities; choose a smarter, better way to maintain your 2011-2016 6.7L Power Stroke.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eRe-locates the prone-to-crack and catch-fire upper plastic factory fuel filter with a higher quality spin-on 4-micron absolute fuel filter underneath the truck.\u003c\/li\u003e\n\n\u003cli\u003eMakes fuel filter maintenance cheaper and easier.\u003c\/li\u003e\n\n\u003cli\u003eLarger fuel filtration media\u003c\/li\u003e\n\n\u003cli\u003eRetains fuel injector return filtration with HSM filter screen fitting, unlike any competitors.\u003c\/li\u003e\n\n\u003cli\u003eEasy, quick plug-and-play installation, no cutting or removal of any factory components.\u003c\/li\u003e\n\n\u003cli\u003eWill work with HSM lower fuel filter upgrade\u003c\/li\u003e\n\n\u003cli\u003eThe fuel filter system can be returned to stock in a matter of minutes if needed.\u003c\/li\u003e\n\n\u003cli\u003eHigh-quality, made-in-the-USA, HSM billet fuel system components.\u003c\/li\u003e\n\n\u003cli\u003eHighest quality braided diesel fuel lines.\u003c\/li\u003e\n\n\u003cli\u003eNote: If you have a 2016 model year truck, please call before ordering.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2011-2016 Ford 6.7L Power Stroke\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"H\u0026S Motorsports","offers":[{"title":"Default Title","offer_id":45082718470301,"sku":"121012","price":409.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198826057.jpg?v=1713438574"},{"product_id":"hs-motorsports-upper-fuel-filter-relocation-kit-for-17-24-ford-6-7l-power-stroke-121013","title":"HS-Motorsports Upper Fuel Filter Relocation Kit For 17-25 Ford 6.7L Power Stroke","description":"\u003cp\u003eLet's be real, our 2017-2025 6.7L Power Strokes are awesome - but man, they come with a ton of plastic parts that can really cramp your style. Ford's handling of maintenance can be a bit convoluted. Luckily, we're here to make everything simpler!\u003c\/p\u003e\n\u003cp\u003eOur meticulously crafted kit is designed to revolutionize your 2017-2025 6.7L Power Stroke experience. It includes everything necessary to replace that inconveniently located under-the-hood fuel filter with our precision-engineered fuel filter relocation kit. We also swap out the fuel filter itself with a top-of-the-line, screw-on style Baldwin fuel filter.\u003c\/p\u003e\n\u003cp\u003eNot only does this kit relocate your filter to a more accessible and user-friendly location under the truck, but it also enhances filtration efficiency, outperforming the factory setup. Say goodbye to that frustrating plastic filter housing and welcome a logical, easy-to-maintain solution that can be installed in under 30 minutes.\u003c\/p\u003e\n\u003cp\u003eUpgrade your Power Stroke with the \"Upper Fuel Filter Relocation Kit\" today and experience the difference in both convenience and performance. Don't settle for factory complexities; choose a smarter, better way to maintain your 2017-2025 6.7L Power Stroke.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRe-locates the prone-to-crack and catch-fire upper plastic factory fuel filter with a higher quality spin-on 4-micron absolute fuel filter underneath the truck.\u003c\/li\u003e\n\u003cli\u003eMakes fuel filter maintenance cheaper and easier.\u003c\/li\u003e\n\u003cli\u003eLarger fuel filtration media\u003c\/li\u003e\n\u003cli\u003eRetains fuel injector return filtration with HSM filter screen fitting, unlike any competitors.\u003c\/li\u003e\n\u003cli\u003eEasy, quick plug-and-play installation, no cutting or removal of any factory components.\u003c\/li\u003e\n\u003cli\u003eWill work with HSM lower fuel filter upgrade\u003c\/li\u003e\n\u003cli\u003eThe fuel filter system can be returned to stock in a matter of minutes if needed.\u003c\/li\u003e\n\u003cli\u003eHigh-quality, made-in-the-USA, HSM billet fuel system components.\u003c\/li\u003e\n\u003cli\u003eHighest quality braided diesel fuel lines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2017-2025 Ford 6.7L Power Stroke\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"H\u0026S Motorsports","offers":[{"title":"Default Title","offer_id":45082720272541,"sku":"121013","price":409.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198826110.jpg?v=1713438599"},{"product_id":"airdog-ii-5g-165gph-lift-pump-ss-cp4-to-dcr-conversion-kit-for-2011-2016-ford-6-7l-powerstroke-a7sabf589-6-7f-dcr","title":"AirDog II 5G 165GPH Lift Pump \u0026 S\u0026S CP4 To DCR Conversion Kit For 2011-2016 Ford 6.7L Powerstroke","description":"\u003cp\u003e\u003cem\u003eLooking to switch to the popular S\u0026amp;S Diesel CP4 to DCR kit, and add an AirDog lift pump to your truck? Rudy's has put a package together including both! Both the AirDog and DCR conversion kit include all parts needed to complete installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe CP4 high-pressure fuel pump in 2011 to 2022 Ford Super Duty diesel trucks has a well-earned reputation for failing without warning, creating sudden power loss, and taking out the expensive high-pressure fuel system in the process. Despite having to deal with being broken down on the side of the road, truck owners will be facing fuel system repairs that can easily exceed $10,000. The unreliable reputation is supported by recalls and lawsuits leveled at various auto manufacturers that use the CP4 in their production vehicles.\u003c\/p\u003e\n\u003cp\u003eS\u0026amp;S Diesel Motorsport™, the common rail diesel injection experts, teamed up with PurePower Technologies, Inc.®, the aftermarket division of longstanding fuel system manufacturer, Stanadyne®, to do the impossible. Collectively, they solved the widely-known CP4 fuel pump problem plaguing Ford Super Duty trucks using the 6.7L Power Stroke diesel engine.\u003c\/p\u003e\n\u003cp\u003eThe joint S\u0026amp;S Diesel Motorsport and PurePower engineering team has changed the game by developing a more durable plug-and-play-replacement pump, with OE fit and function, for the CP4.\u003c\/p\u003e\n\u003cp\u003eWith a price of $2,400.00 USD, the S\u0026amp;S Diesel Motorsport Ford 6.7L CP4 to DCR Pump Conversion can save Ford truck owners $10,000 to $15,000 in repairs. Owners can install peace of mind knowing their daily workhorse isn’t going to lay down on them. The DCR Pump Conversion is emissions compliant (SEMA Cert #SC-SDM01-0034) and fits 2011 to 2022 Ford F250-F750 diesel trucks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\u003cli\u003eOE-Style Quick Connects\u003c\/li\u003e\n\u003cli\u003eBrand new PurePower DCR Pump\u003c\/li\u003e\n\u003cli\u003eIncludes all fuel lines and hardware\u003c\/li\u003e\n\u003cli\u003eCan save Ford 6.7 truck owners $10,000 to $15,000 in fuel system repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eAirDog 5G\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAn industry first! The AirDog® II-5G is the first diesel Fuel Air Separation System to include an integrated diaphragm fuel pressure regulator. This regulator allows for more fuel pressure adjustability, offers better fuel flow at pressure, and can be boost compensated! This system has larger porting to allow less cavitation and noise at the inlet of the higher flowing 220GPH pumps. All AirDog II-5G systems come with improved wiring harnesses and connectors as well! The wiring harness is now 12ga from the battery all the way to the internal connections in the motor. A Metri-Pack 280 connector replaces the Deutch 2 pin connector which allows more more current flow without creating excessive heat. All other connectors in the harness are weather pack to keep the elements out. This system has the same 4G motor technology that has proven itself to be a reliable, quiet operating system. It also retains the \"Demand Flow\" of the older AirDog II variants. Demand Flow means whatever fuel the injection system does not consume gets recirculated back through the filter base.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLifetime Warranty\u003c\/li\u003e\n\u003cli\u003eLarger Ports Over Previous Pumps\u003c\/li\u003e\n\u003cli\u003eDiaphragm Fuel Pressure Regulator\u003c\/li\u003e\n\u003cli\u003eDemand Flow Design\u003c\/li\u003e\n\u003cli\u003eAdjustable From 7-70 PSI\u003c\/li\u003e\n\u003cli\u003eIncreased Fuel Economy\u003c\/li\u003e\n\u003cli\u003eIncreased Horsepower \u0026amp; Torque Output\u003c\/li\u003e\n\u003cli\u003eIncreased Injection Pump Life\u003c\/li\u003e\n\u003cli\u003eLonger Injector Life\u003c\/li\u003e\n\u003cli\u003eImproved Throttle Response\u003c\/li\u003e\n\u003cli\u003eReduced Exhaust Emissions\u003c\/li\u003e\n\u003cli\u003eIncreased Fuel Flow Rates\u003c\/li\u003e\n\u003cli\u003eRemoves Air\/Vapor from Diesel Fuel\u003c\/li\u003e\n\u003cli\u003eComplete Installation Kit and Detailed Instructions\u003c\/li\u003e\n\u003cli\u003e1\/2\" Fuel Lines with OEM-Style Quick Connect Fittings\u003c\/li\u003e\n\u003cli\u003e4 Bearing Motor with Intermediate Shaft For Reduced Pump Noise\u003c\/li\u003e\n\u003cli\u003eThis Is A Complete Kit – Includes Pump \u0026amp; All Needed Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2011-2016 Ford F-250\/F-350 6.7L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eNo Tuning Required\u003c\/p\u003e\n\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/hNXIH-JNg30\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082736722077,"sku":"A7SABF589 | 6.7F-DCR-1","price":3216.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198827149.png?v=1713438910"},{"product_id":"airdog-ii-5g-165gph-ss-cp4-disaster-prevention-kit-for-11-16-ford-powerstroke-a7sabf589-cp4-6-7f-bp-g2","title":"AirDog II 5G 165GPH \u0026 S\u0026S CP4 Disaster Prevention Kit For 11-16 Ford Powerstroke","description":"\u003cdiv class=\"b-desc\"\u003e\n\n\u003cp\u003e\u003cstrong\u003eS\u0026amp;S Diesel Motorsport\u003c\/strong\u003e, the creator of the original Disaster Prevention Kit for the 6.7 Power Stroke, is at it again with a much-improved second generation kit. Since its debut in 2016, the original S\u0026amp;S 6.7L Power Stroke CP4 Bypass Kit (Disaster Prevention Kit) has safeguarded thousands of injectors from CP4 debris. In fact, it works so well that it has been copied by multiple opportunists within the aftermarket. Being a company founded by fuel system engineers, S\u0026amp;S Diesel Motorsport has the ability, and responsibility, to offer the best solutions to fuel system problems. While the original bypass kit offers really good protection from a CP4 failure, the last four years have given the S\u0026amp;S engineers plenty of time to discover and eliminate potential problems.\u003c\/p\u003e\n\n\u003cp\u003eThe S\u0026amp;S Diesel Motorsport Gen2.1 6.7L Power Stroke CP4 Disaster Prevention Kit features all quick connect lines that will eliminate the need for cutting the factory supply line, which is a debris introduction point, especially if the cut is not thoroughly deburred. It also eliminates the need to use a compression fitting, which is a potential leak point. The OE-style quick connect lines also eliminate any threaded joints that are further leak points and have the potential of generating debris during install.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNew and improved Gen2.1 Disaster Prevention Kit\u003c\/li\u003e\n\n\u003cli\u003eSafeguards fuel injectors, rails, lines, and tank from CP4 debris\u003c\/li\u003e\n\n\u003cli\u003eThoroughly validated and proven to work in real-world testing\u003c\/li\u003e\n\n\u003cli\u003eAll OE-style quick connects (easy install)\u003c\/li\u003e\n\n\u003cli\u003eFuel supply split-off 25 inches away from the CP4 pump\u003c\/li\u003e\n\n\u003cli\u003eReturn filter isolates CP4 debris before it goes on to the tank\u003c\/li\u003e\n\n\u003cli\u003eGen2.1 billet filter head accepts standard spin-on fuel filters\u003c\/li\u003e\n\n\u003cli\u003eComes with Donaldson P550943 fuel filter (9-micron at 99% efficiency)\u003c\/li\u003e\n\n\u003cli\u003eOne part number fits all years (2011+)\u003c\/li\u003e\n\n\u003cli\u003eImproves CP4 output past 3,000 RPM (see data below)\u003c\/li\u003e\n\n\u003cli\u003eCan extend the range of a truck during a CP4 failure\u003c\/li\u003e\n\n\u003cli\u003eCARB Compliant (EO# D-756-6)\u003c\/li\u003e\n\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAirDog®\u003c\/strong\u003e This replaces the factory frame rail fuel pump. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. The suction side hooks up to the factory suction line on the frame rail. The pressure side connects to the factory feed line to the injection pump. The AirDog Air\/Vapor return is sent back to the tank through a return “y” that ties the AirDog return to the factory engine return. This system has the same 4G motor technology that has proven itself to be a reliable, quiet operating system. It also retains the \"Demand Flow\" of the older AirDog II variants. Demand Flow means whatever fuel the injection system does not consume gets recirculated back through the filter base.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAirDog II-5G products remove all entrained air, water, and particulates down to 2 micron from your diesel fuel. This helps increase fuel mileage, horsepower and torque, all while extending the life of your injection system parts.\u003c\/li\u003e\n\n\u003cli\u003eThe AirDog® II-5G is diaphragm regulated for maximum fuel pressure stabilization.\u003c\/li\u003e\n\n\u003cli\u003eThis system has the same 4G motor technology that has proven itself to be a reliable, quiet operating system. It also retains the \"Demand Flow\" of the older AirDog II variants. Demand Flow means whatever fuel the injection system does not consume gets recirculated back through the filter base.\u003c\/li\u003e\n\n\u003cli\u003eAll-Inclusive Installation Kit\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2011-2016 Ford F250\/F350 6.7L Powerstoke\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDisaster Prevention Kit\u003c\/li\u003e\n\n\u003cli\u003eAirDog II-5G Lift Pump Diesel Fuel System 165 GPH \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082739048605,"sku":"A7SABF589 | CP4-6.7F-BP-G2.1","price":1216.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198827164.png?v=1713438917"},{"product_id":"airdog-ii-5g-165gph-ss-cp4-disaster-prevention-kit-for-17-22-ford-powerstroke","title":"AirDog II 5G 165GPH \u0026 S\u0026S CP4 Disaster Prevention Kit For 17-22 Ford Powerstroke","description":"\u003cdiv class=\"b-desc\"\u003e\n\n\u003cp\u003e\u003cstrong\u003eS\u0026amp;S Diesel Motorsport\u003c\/strong\u003e, the creator of the original Disaster Prevention Kit for the 6.7 Power Stroke, is at it again with a much-improved second generation kit. Since its debut in 2016, the original S\u0026amp;S 6.7L Power Stroke CP4 Bypass Kit (Disaster Prevention Kit) has safeguarded thousands of injectors from CP4 debris. In fact, it works so well that it has been copied by multiple opportunists within the aftermarket. Being a company founded by fuel system engineers, S\u0026amp;S Diesel Motorsport has the ability, and responsibility, to offer the best solutions to fuel system problems. While the original bypass kit offers really good protection from a CP4 failure, the last four years have given the S\u0026amp;S engineers plenty of time to discover and eliminate potential problems.\u003c\/p\u003e\n\n\u003cp\u003eThe S\u0026amp;S Diesel Motorsport Gen2.1 6.7L Power Stroke CP4 Disaster Prevention Kit features all quick connect lines that will eliminate the need for cutting the factory supply line, which is a debris introduction point, especially if the cut is not thoroughly deburred. It also eliminates the need to use a compression fitting, which is a potential leak point. The OE-style quick connect lines also eliminate any threaded joints that are further leak points and have the potential of generating debris during install.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNew and improved Gen2.1 Disaster Prevention Kit\u003c\/li\u003e\n\n\u003cli\u003eSafeguards fuel injectors, rails, lines, and tank from CP4 debris\u003c\/li\u003e\n\n\u003cli\u003eThoroughly validated and proven to work in real-world testing\u003c\/li\u003e\n\n\u003cli\u003eAll OE-style quick connects (easy install)\u003c\/li\u003e\n\n\u003cli\u003eFuel supply split-off 25 inches away from the CP4 pump\u003c\/li\u003e\n\n\u003cli\u003eReturn filter isolates CP4 debris before it goes on to the tank\u003c\/li\u003e\n\n\u003cli\u003eGen2.1 billet filter head accepts standard spin-on fuel filters\u003c\/li\u003e\n\n\u003cli\u003eComes with Donaldson P550943 fuel filter (9-micron at 99% efficiency)\u003c\/li\u003e\n\n\u003cli\u003eOne part number fits all years (2011+)\u003c\/li\u003e\n\n\u003cli\u003eImproves CP4 output past 3,000 RPM (see data below)\u003c\/li\u003e\n\n\u003cli\u003eCan extend the range of a truck during a CP4 failure\u003c\/li\u003e\n\n\u003cli\u003eCARB Compliant (EO# D-756-6)\u003c\/li\u003e\n\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAirDog®\u003c\/strong\u003e This replaces the factory frame rail fuel pump. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. The suction side hooks up to the factory suction line on the frame rail. The pressure side connects to the factory feed line to the injection pump. The AirDog Air\/Vapor return is sent back to the tank through a return “y” that ties the AirDog return to the factory engine return. This system has the same 4G motor technology that has proven itself to be a reliable, quiet operating system. It also retains the \"Demand Flow\" of the older AirDog II variants. Demand Flow means whatever fuel the injection system does not consume gets recirculated back through the filter base.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAirDog II-5G products remove all entrained air, water, and particulates down to 2 micron from your diesel fuel. This helps increase fuel mileage, horsepower and torque, all while extending the life of your injection system parts.\u003c\/li\u003e\n\n\u003cli\u003eThe AirDog® II-5G is diaphragm regulated for maximum fuel pressure stabilization.\u003c\/li\u003e\n\n\u003cli\u003eThis system has the same 4G motor technology that has proven itself to be a reliable, quiet operating system. It also retains the \"Demand Flow\" of the older AirDog II variants. Demand Flow means whatever fuel the injection system does not consume gets recirculated back through the filter base.\u003c\/li\u003e\n\n\u003cli\u003eAll-Inclusive Installation Kit\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2017-2022 Ford F250\/F350 6.7L Powerstoke\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDisaster Prevention Kit\u003c\/li\u003e\n\n\u003cli\u003eAirDog II-5G Lift Pump Diesel Fuel System 165 GPH \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082739114141,"sku":"A7SABF590 | CP4-6.7F-BP-G2.1","price":1254.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198827175.png?v=1713438920"},{"product_id":"airdog-ii-5g-165gph-ss-cp4-to-dcr-kit-for-2017-2022-ford-6-7l-powerstroke-a7sabf590-6-7f-dcr","title":"AirDog II-5G 165GPH \u0026 S\u0026S CP4 To DCR Kit For 2017-2022 Ford 6.7L Powerstroke","description":"\u003cp\u003e\u003cstrong\u003eS\u0026amp;S Diesel Motorsport:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eUpgrade your Ford diesel engine's fuel system with the reliable and efficient S\u0026amp;S Diesel Motorsport Ford 6.7L CP4 to DCR Pump Conversion. This cutting-edge aftermarket product replaces the problematic CP4 fuel pump with a more dependable DCR pump, solving the widely-known CP4 high-pressure fuel pump problem plaguing Ford Super Duty trucks using the 6.7L Power Stroke diesel engine.\u003c\/p\u003e\n\n\u003cp\u003eThe CP4 has a well-earned reputation for failing without warning, creating sudden power loss, and taking out the expensive high-pressure fuel system in the process. Despite having to deal with being broken down on the side of the road, truck owners will be facing fuel system repairs that can easily exceed $10,000. The unreliable reputation is supported by recalls and lawsuits leveled at various auto manufacturers that use the CP4 in their production vehicles.\u003c\/p\u003e\n\n\u003cp\u003eRemoving the CP4 is the obvious solution, yet developing a durable plug-and-play CP4 replacement with OE fit and function is the game-changing catalyst created by S\u0026amp;S Diesel Motorsport and PurePower Technologies. Starting off with a proven Stanadyne DCR fuel pump design, a joint team of S\u0026amp;S and PurePower engineers developed a variant specifically for the Ford 6.7L Power Stroke that matches the CP4 output curve and does not require any calibration changes. Combining that with OE-grade braided hose and steel fuel lines gives Ford Super Duty owners a more-reliable CP4 replacement that fits and performs like original equipment.\u003c\/p\u003e\n\n\u003cp\u003eThe S\u0026amp;S Diesel FORD 6.7L CP4 TO DCR PUMP CONVERSION is a direct drop-in solution. The two-piston DCR pump is based on a compact and modular design for easy integration, has low hydraulic and acoustical noise, features ultra-fast response times, and is low-lubricity fuel compatible. It uses a patented eccentric drive pumping technology, with pressure-lubricated cam and bushings, for increased performance, efficiency, and benchmark durability. The Fuel Control Actuator (FCA) uses high-quality corrosion-resistant components and proprietary features to prevent large debris from entering the actuator, providing exceptional robustness for longevity and durability in harsh environmental conditions. The DCR can provide a max fuel delivery of 1,250 mm3 per revolution (25% more than a CP4.2), producing plenty of flow for worn injectors that have a high return.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAirDog:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Pureflow AirDog II-5G 165 GPH Air\/Fuel Separation System is the newest generation in fuel delivery systems for your Ford 6.7L Powerstroke. The 5G is engineered to be the longest lasting, most efficient, and quietest lift pump system AirDog has to offer.\u003c\/p\u003e\n\n\u003cp\u003eThe AirDog II-5G features a 4-bearing motor with an intermediate shaft that reduces pump noise and improves reliability. A dual feed design supplies fuel to both sides of the gerotor pump to decrease air bubbles and cavitation. The demand flow design allows the pump to only send the necessary amount of fuel to the engine.\u003c\/p\u003e\n\n\u003cp\u003eThe AirDog II-5G utilizes a diaphragm style fuel pressure regulator allowing the pump to be boost referenced and adjusted from 7-70 PSI The 5G system features larger 3\/4-16 O-ring boss inlet and outlet ports. A 7\/16-20 (-4) low-flow return is used to prevent aeration in the fuel being sent to back to the tank.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eS\u0026amp;S CP4 to DCR Conversion Kit Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDurable Plug-and-Play CP4 replacement with OE fit and function\u003c\/li\u003e\n\n\u003cli\u003eMatches the CP4 output curve and does not require any calibration changes\u003c\/li\u003e\n\n\u003cli\u003eThe two-piston DCR pump is based on a compact and modular design for easy integration\u003c\/li\u003e\n\n\u003cli\u003ePatented Eccentric Drive Pumping Technology for increased Performance, Efficiency, and Benchmark Durability\u003c\/li\u003e\n\n\u003cli\u003eLow Hydraulic and Acoustical Noise\u003c\/li\u003e\n\n\u003cli\u003eUltra-fast Response Times\u003c\/li\u003e\n\n\u003cli\u003eBiofuel and Low-Lubricity Fuel Compatible\u003c\/li\u003e\n\n\u003cli\u003eProvide a Max Fuel delivery of 1,250 mm3 per revolution\u003c\/li\u003e\n\n\u003cli\u003eEquipped with Stanadyne’s New Corrosion-Resistant Inlet Metering Valve (IMV) designed to extend DCR fuel pump life\u003c\/li\u003e\n\n\u003cli\u003eIMV uses high-quality corrosion-resistant components and proprietary features to prevent large debris from entering the valve, providing exceptional robustness for longevity and durability in harsh environmental conditions\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAirDog II-5G (165 GPH) Air\/Fuel Separation System Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e165 GPH Pump\u003c\/li\u003e\n\n\u003cli\u003e4 Bearing Motor with Intermediate Shaft\u003c\/li\u003e\n\n\u003cli\u003eLarger Ports Over Previous Pumps\u003c\/li\u003e\n\n\u003cli\u003eDiaphragm Fuel Pressure Regulator\u003c\/li\u003e\n\n\u003cli\u003eDemand Flow Design\u003c\/li\u003e\n\n\u003cli\u003eReduced Aeration From Low Flow Return\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2017-2022 Ford F-250\/F-350 6.7L Powerstroke\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eS\u0026amp;S CP4 to DCR Conversion Kit\u003c\/li\u003e\n\n\u003cli\u003eAirDog II-5G (165 GPH) Air\/Fuel Separation System\u003c\/li\u003e\n\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082739146909,"sku":"A7SABF590 | 6.7F-DCR-1","price":3254.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198827201.png?v=1713438921"},{"product_id":"fass-140gph-fuel-system-ss-cp4-to-dcr-kit-for-2011-2016-ford-6-7l-powerstroke-tsf17140g-6-7f-dcr","title":"FASS 140GPH Fuel System \u0026 S\u0026S CP4 To DCR Kit For 2011-2016 Ford 6.7L Powerstroke","description":"\u003cp\u003eLooking to switch to the popular S\u0026amp;S Diesel CP4 to DCR kit, and add an FASS lift pump to your truck? Rudy's has put a package together including both! Both the FASS and S\u0026amp;S DCR conversion kit include all parts needed to complete installation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eS\u0026amp;S CP4 to DCR Conversion Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe CP4 high-pressure fuel pump in 2011 to current Ford Super Duty diesel trucks has a well-earned reputation for failing without warning, creating sudden power loss, and taking out the expensive high-pressure fuel system in the process. Despite having to deal with being broken down on the side of the road, truck owners will be facing fuel system repairs that can easily exceed $10,000. The unreliable reputation is supported by recalls and lawsuits leveled at various auto manufacturers that use the CP4 in their production vehicles.\u003c\/p\u003e\n\u003cp\u003eS\u0026amp;S Diesel Motorsport™, the common rail diesel injection experts, teamed up with PurePower Technologies, Inc.®, the aftermarket division of longstanding fuel system manufacturer, Stanadyne®, to do the impossible. Collectively, they solved the widely-known CP4 fuel pump problem plaguing Ford Super Duty trucks using the 6.7L Power Stroke diesel engine.\u003c\/p\u003e\n\u003cp\u003eThe joint S\u0026amp;S Diesel Motorsport and PurePower engineering team has changed the game by developing a more durable plug-and-play-replacement pump, with OE fit and function, for the CP4.\u003c\/p\u003e\n\u003cp\u003eWith a price of $2,400.00 USD, the S\u0026amp;S Diesel Motorsport Ford 6.7L CP4 to DCR Pump Conversion can save Ford truck owners $10,000 to $15,000 in repairs. Owners can install peace of mind knowing their daily workhorse isn’t going to lay down on them. The DCR Pump Conversion is emissions compliant (SEMA Cert #SC-SDM01-0034) and fits 2011 to 2022 Ford F250-F750 diesel trucks.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMore durable plug-and-play replacement for the CP4\u003c\/li\u003e\n\u003cli\u003eDoes not require any ECU calibration\u003c\/li\u003e\n\u003cli\u003eOE fit and function\u003c\/li\u003e\n\u003cli\u003eTwo-piston DCR pump co-developed by S\u0026amp;S\/PurePower\u003c\/li\u003e\n\u003cli\u003eBiofuel and low-lubricity fuel compatible\u003c\/li\u003e\n\u003cli\u003ePatented Eccentric Drive pumping technology\u003c\/li\u003e\n\u003cli\u003ePressure-lubricated cam and bushings\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant FCA\u003c\/li\u003e\n\u003cli\u003e1,250 mm\u003csup\u003e3\u003c\/sup\u003e\/revolution displacement\u003c\/li\u003e\n\u003cli\u003eSEMA Certified Emissions Compliant\u003c\/li\u003e\n\u003cli\u003eTwo-year, unlimited-mile warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFASS Fuel System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Titanium Signature Series diesel fuel System Featuring our Revolutionary Whisper Technology was engineered by FASS Diesel Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration System in the diesel industry.  Rated at 140 gallons per hour, high pressures of 70PSI and backed by our limited lifetime warranty the Titanium Signature Series fuel System is capable of supporting your Ford Powerstroke 6.7L diesel engine with enough fuel for aggressive tuning and fuel System upgrades up to 700 HP A Titanium Signature Series fuel System also offers advanced filtration benefits that will help protect your Powerstroke injection Systems, effectively extending the life of both your Injection System and Injectors. These Benefits include an improved filtration rating of 2 Microns, a built-in water separation filter, and FASS Diesel Fuel Systems patented air\/vapor removal process.   Aftermarket Systems are important for both drivers and high-performance applications when looking to improve either fuel economy or increase horsepower\/torque.\u003c\/p\u003e\n\u003cp\u003eThis kit includes a FASS BHF-1005 (Bulkhead and Suction Tube Kit).  Machined from 6061 T-6 Billet Aluminum. This Bulkhead fitting is designed to mount directly to the factory fuel tank module (sending unit) to allow the FASS to directly draw and return fuel to the fuel tank module, effectively eliminating all 1\/4 tank and 1\/8 tank issues when installed correctly. The pickup tube is fabricated out of PTFE Teflon which can be easily cut to adapt to different depth of fuel tanks. Properly installed, you can safely operate down to approximately 0 miles until empty.\u003c\/p\u003e\n\u003cp\u003eThe Titanium Signature Series diesel fuel Systems are the superior fuel System and filtration System, in the diesel industry.  This is because here at FASS Diesel Fuel Systems we focus on perfecting our Systems and how they are engineered, taking the extra steps that our competitors ignore while they rush to get the product out the door.  By doing this we have less than a 2% failure rating with our motor and a design that implements unique design features you can only get with FASS Diesel Fuel Systems\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew Whisper Technology\u003c\/li\u003e\n\u003cli\u003eBolt On Bracket Installation\u003c\/li\u003e\n\u003cli\u003ePreset 60-65 PSI Fuel Pressure\u003c\/li\u003e\n\u003cli\u003eComplete Replacement System\u003c\/li\u003e\n\u003cli\u003e140 Gallons Per Hour Flow Rating\u003c\/li\u003e\n\u003cli\u003eRemoves Water, Air and Debris From Diesel Fuel\u003c\/li\u003e\n\u003cli\u003e2 Micron Filtration Rating\u003c\/li\u003e\n\u003cli\u003eProtects and Extends The Life Of Your Injectors\u003c\/li\u003e\n\u003cli\u003eImproved Cold Weather Starts\u003c\/li\u003e\n\u003cli\u003eDecreases Carbon Monoxide and Carbon Dioxide Emissions\u003c\/li\u003e\n\u003cli\u003e½ Inch Fuel Lines and Ports\u003c\/li\u003e\n\u003cli\u003eFuel Mileage Improvement\u003c\/li\u003e\n\u003cli\u003eImproved Fuel Volume Delivery\u003c\/li\u003e\n\u003cli\u003eSmoother Engine Idle\u003c\/li\u003e\n\u003cli\u003eOptional Electric Heater Ports\u003c\/li\u003e\n\u003cli\u003eOptional Fuel Pressure Gauge Port\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003e1,000,000 Mile Motor\u003c\/li\u003e\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\u003cli\u003eQuietest Motor On The Market\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2011-2016 Ford F-250\/F-350 6.7L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eS\u0026amp;S CP4 to DCR Conversion Kit\u003c\/li\u003e\n\u003cli\u003eFASS Titanium Signature Series Diesel Fuel System 180F 140GPH, (60-65 PSI)\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082739769501,"sku":"TSF17180F140G | 6.7F-DCR-1","price":3159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198827219.png?v=1784815873"},{"product_id":"fass-220gph-fuel-system-ss-cp4-to-dcr-kit-for-2011-2016-ford-6-7l-powerstroke-tsf17220g-6-7f-dcr","title":"FASS 220GPH Fuel System \u0026 S\u0026S CP4 To DCR Kit For 2011-2016 Ford 6.7L Powerstroke","description":"\u003cp\u003eLooking to switch to the popular S\u0026amp;S Diesel CP4 to DCR kit, and add an FASS lift pump to your truck? Rudy's has put a package together including both! Both the FASS lift pump and S\u0026amp;S DCR conversion kit include all parts needed to complete installation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eS\u0026amp;S CP4 to DCR Conversion Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CP4 high-pressure fuel pump in 2011 to current Ford Super Duty diesel trucks has a well-earned reputation for failing without warning, creating sudden power loss, and taking out the expensive high-pressure fuel system in the process. Despite having to deal with being broken down on the side of the road, truck owners will be facing fuel system repairs that can easily exceed $10,000. The unreliable reputation is supported by recalls and lawsuits leveled at various auto manufacturers that use the CP4 in their production vehicles.\u003c\/p\u003e\n\u003cp\u003eS\u0026amp;S Diesel Motorsport™, the common rail diesel injection experts, teamed up with PurePower Technologies, Inc.®, the aftermarket division of longstanding fuel system manufacturer, Stanadyne®, to do the impossible. Collectively, they solved the widely-known CP4 fuel pump problem plaguing Ford Super Duty trucks using the 6.7L Power Stroke diesel engine.\u003c\/p\u003e\n\u003cp\u003eThe joint S\u0026amp;S Diesel Motorsport and PurePower engineering team has changed the game by developing a more durable plug-and-play-replacement pump, with OE fit and function, for the CP4.\u003c\/p\u003e\n\u003cp\u003eWith a price of $2,400.00 USD, the S\u0026amp;S Diesel Motorsport Ford 6.7L CP4 to DCR Pump Conversion can save Ford truck owners $10,000 to $15,000 in repairs. Owners can install peace of mind knowing their daily workhorse isn’t going to lay down on them. The DCR Pump Conversion is emissions compliant (SEMA Cert #SC-SDM01-0034) and fits 2011 to 2022 Ford F250-F750 diesel trucks.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMore durable plug-and-play replacement for the CP4\u003c\/li\u003e\n\u003cli\u003eDoes not require any ECU calibration\u003c\/li\u003e\n\u003cli\u003eOE fit and function\u003c\/li\u003e\n\u003cli\u003eTwo-piston DCR pump co-developed by S\u0026amp;S\/PurePower\u003c\/li\u003e\n\u003cli\u003eBiofuel and low-lubricity fuel compatible\u003c\/li\u003e\n\u003cli\u003ePatented Eccentric Drive pumping technology\u003c\/li\u003e\n\u003cli\u003ePressure-lubricated cam and bushings\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant FCA\u003c\/li\u003e\n\u003cli\u003e1,250 mm\u003csup\u003e3\u003c\/sup\u003e\/revolution displacement\u003c\/li\u003e\n\u003cli\u003eSEMA Certified Emissions Compliant\u003c\/li\u003e\n\u003cli\u003eTwo-year, unlimited-mile warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFASS Fuel System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Titanium Signature Series diesel fuel System was engineered by FASS Diesel Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration System in the diesel industry. Rated at 220 gallons per hour, high pressures of 65PSI and backed by our limited lifetime warranty the Titanium Signature Series System can support your Ford Powerstroke 6.7L diesel engine with enough fuel for 900-1200 HP aggressive tuning and high-performance fuel System upgrades. A Titanium Signature Series fuel System also offers advanced filtration benefits that will help protect your Powerstroke injection Systems, effectively extending the life of both your Injection System and Injectors. These Benefits include an improved filtration rating of 2 Microns, a built-in water separation filter and FASS Diesel Fuel Systems patented air\/vapor removal process. Aftermarket Systems are important for both drivers and high-performance applications when looking to improve either fuel economy or increase horsepower\/torque.\u003c\/p\u003e\n\u003cp\u003eThis kit includes a FASS BHF-1005 (Bulkhead and Suction Tube Kit). Machined from 6061 T-6 Billet Aluminum. This Bulkhead fitting is designed to mount directly to the factory fuel tank module (sending unit) to allow the FASS to directly draw and return fuel to the fuel tank module, effectively eliminating all 1\/4 tank and 1\/8 tank issues when installed correctly. The pickup tube is fabricated out of PTFE Teflon which can be easily cut to adapt to different depth of fuel tanks. Properly installed, you can safely operate down to approximately 0 miles until empty.\u003c\/p\u003e\n\u003cp\u003eThe Titanium Signature Series diesel fuel Systems are the superior fuel System and filtration System, in the diesel industry. This is because here at FASS Diesel Fuel Systems we focus on perfecting our Systems and how they are engineered, taking the extra steps that our competitors ignore while they rush to get product out the door. By doing this we have less than a 2% failure rating with our motor and a design that implements unique design features you can only get with FASS Diesel Fuel Systems\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew Whisper Technology\u003c\/li\u003e\n\u003cli\u003eBolt On Bracket Installation\u003c\/li\u003e\n\u003cli\u003ePreset 60-65 PSI Fuel Pressure\u003c\/li\u003e\n\u003cli\u003eComplete Replacement System\u003c\/li\u003e\n\u003cli\u003e200 Gallons Per Hour Flow Rating\u003c\/li\u003e\n\u003cli\u003eRemoves Water, Air and Debris From Diesel Fuel\u003c\/li\u003e\n\u003cli\u003e2 Micron Filtration Rating\u003c\/li\u003e\n\u003cli\u003eProtects and Extends The Life Of Your Injectors\u003c\/li\u003e\n\u003cli\u003eImproved Cold Weather Starts\u003c\/li\u003e\n\u003cli\u003eDecreases Carbon Monoxide and Carbon Dioxide Emissions\u003c\/li\u003e\n\u003cli\u003e½ Inch Fuel Lines and Ports\u003c\/li\u003e\n\u003cli\u003eFuel Mileage Improvement\u003c\/li\u003e\n\u003cli\u003eImproved Fuel Volume Delivery\u003c\/li\u003e\n\u003cli\u003eSmoother Engine Idle\u003c\/li\u003e\n\u003cli\u003eOptional Electric Heater Ports\u003c\/li\u003e\n\u003cli\u003eOptional Fuel Pressure Gauge Port\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003e1,000,000 Mile Motor\u003c\/li\u003e\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\u003cli\u003eQuietest Motor On The Market\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2011-2016 Ford F-250\/F-350 6.7L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eS\u0026amp;S CP4 to DCR Conversion Kit\u003c\/li\u003e\n\u003cli\u003eFASS Titanium Signature Series Diesel Fuel System 250F 220GPH, (60-65 PSI)\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082740555933,"sku":"TSF17250F220G | 6.7F-DCR-1","price":3199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198827234.png?v=1784815123"},{"product_id":"fass-240gph-fuel-lift-pump-ss-cp4-to-dcr-kit-for-11-16-ford-6-7l-powerstroke-tsf17240g-6-7f-dcr","title":"FASS 240GPH Fuel Lift Pump \u0026 S\u0026S CP4 To DCR Kit For 11-16 Ford 6.7L Powerstroke","description":"\u003cp\u003eLooking to switch to the popular S\u0026amp;S Diesel CP4 to DCR kit, and add an FASS lift pump to your truck? Rudy's has put a package together including both! Both the FASS lift pump and S\u0026amp;S DCR conversion kit include all parts needed to complete installation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eS\u0026amp;S CP4 to DCR Conversion Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CP4 high-pressure fuel pump in 2011 to current Ford Super Duty diesel trucks has a well-earned reputation for failing without warning, creating sudden power loss, and taking out the expensive high-pressure fuel system in the process. Despite having to deal with being broken down on the side of the road, truck owners will be facing fuel system repairs that can easily exceed $10,000. The unreliable reputation is supported by recalls and lawsuits leveled at various auto manufacturers that use the CP4 in their production vehicles.\u003c\/p\u003e\n\u003cp\u003eS\u0026amp;S Diesel Motorsport™, the common rail diesel injection experts, teamed up with PurePower Technologies, Inc.®, the aftermarket division of longstanding fuel system manufacturer, Stanadyne®, to do the impossible. Collectively, they solved the widely-known CP4 fuel pump problem plaguing Ford Super Duty trucks using the 6.7L Power Stroke diesel engine.\u003c\/p\u003e\n\u003cp\u003eThe joint S\u0026amp;S Diesel Motorsport and PurePower engineering team has changed the game by developing a more durable plug-and-play-replacement pump, with OE fit and function, for the CP4.\u003c\/p\u003e\n\u003cp\u003eWith a price of $2,400.00 USD, the S\u0026amp;S Diesel Motorsport Ford 6.7L CP4 to DCR Pump Conversion can save Ford truck owners $10,000 to $15,000 in repairs. Owners can install peace of mind knowing their daily workhorse isn’t going to lay down on them. The DCR Pump Conversion is emissions compliant (SEMA Cert #SC-SDM01-0034) and fits 2011 to 2022 Ford F250-F750 diesel trucks.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMore durable plug-and-play replacement for the CP4\u003c\/li\u003e\n\u003cli\u003eDoes not require any ECU calibration\u003c\/li\u003e\n\u003cli\u003eOE fit and function\u003c\/li\u003e\n\u003cli\u003eTwo-piston DCR pump co-developed by S\u0026amp;S\/PurePower\u003c\/li\u003e\n\u003cli\u003eBiofuel and low-lubricity fuel compatible\u003c\/li\u003e\n\u003cli\u003ePatented Eccentric Drive pumping technology\u003c\/li\u003e\n\u003cli\u003ePressure-lubricated cam and bushings\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant FCA\u003c\/li\u003e\n\u003cli\u003e1,250 mm\u003csup\u003e3\u003c\/sup\u003e\/revolution displacement\u003c\/li\u003e\n\u003cli\u003eSEMA Certified Emissions Compliant\u003c\/li\u003e\n\u003cli\u003eTwo-year, unlimited-mile warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFASS Fuel System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Titanium Signature Series diesel fuel System was engineered by FASS Diesel Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration System in the diesel industry. Rated at 240 gallons per hour, high pressures of 70PSI perfect for competition use and backed by our limited lifetime warranty the Titanium Signature Series fuel System can support your Ford Powerstroke 6.7L diesel engine with enough fuel for 900-1200 HP aggressive tuning and high-performance fuel System upgrades. A Titanium Signature Series fuel System also offers advanced filtration benefits that will help protect your Powerstroke injection Systems, effectively extending the life of both your Injection System and Injectors. These Benefits include an improved filtration rating of 2 Microns, a built-in water separation filter and FASS Fuel Systems patented air\/vapor removal process. Aftermarket Systems are important for both drivers and high-performance applications when looking to improve either fuel economy or increase horsepower\/torque.\u003c\/p\u003e\n\u003cp\u003eThis kit includes a FASS BHF-1005 (Bulkhead and Suction Tube Kit). Machined from 6061 T-6 Billet Aluminum. This Bulkhead fitting is designed to mount directly to the factory fuel tank module (sending unit) to allow the FASS to directly draw and return fuel to the fuel tank module, effectively eliminating all 1\/4 tank and 1\/8 tank issues when installed correctly. The pickup tube is fabricated out of PTFE Teflon which can be easily cut to adapt to different depth of fuel tanks. Properly installed, you can safely operate down to approximately 0 miles until empty.\u003c\/p\u003e\n\u003cp\u003eThe Titanium Signature Series diesel fuel Systems are the superior fuel System and filtration System, in the diesel industry. This is because here at FASS Diesel Fuel Systems we focus on perfecting our Systems and how they are engineered, taking the extra steps that our competitors ignore while they rush to get product out the door. By doing this we have less than a 2% failure rating with our motor and a design that implements unique design features you can only get with FASS Diesel Fuel Systems.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew Whisper Technology\u003c\/li\u003e\n\u003cli\u003eBolt On Bracket Installation\u003c\/li\u003e\n\u003cli\u003ePreset 60-65 PSI Fuel Pressure\u003c\/li\u003e\n\u003cli\u003eComplete Replacement System\u003c\/li\u003e\n\u003cli\u003e240 Gallons Per Hour Flow Rating\u003c\/li\u003e\n\u003cli\u003eRemoves Water, Air and Debris From Diesel Fuel\u003c\/li\u003e\n\u003cli\u003e2 Micron Filtration Rating\u003c\/li\u003e\n\u003cli\u003eProtects and Extends The Life Of Your Injectors\u003c\/li\u003e\n\u003cli\u003eImproved Cold Weather Starts\u003c\/li\u003e\n\u003cli\u003eDecreases Carbon Monoxide and Carbon Dioxide Emissions\u003c\/li\u003e\n\u003cli\u003e½ Inch Fuel Lines and Ports\u003c\/li\u003e\n\u003cli\u003eIncludes Bulkhead Fitting and Suction Tube Kit\u003c\/li\u003e\n\u003cli\u003eFuel Mileage Improvement\u003c\/li\u003e\n\u003cli\u003eImproved Fuel Volume Delivery\u003c\/li\u003e\n\u003cli\u003eSmoother Engine Idle\u003c\/li\u003e\n\u003cli\u003eOptional Electric Heater Ports\u003c\/li\u003e\n\u003cli\u003eOptional Fuel Pressure Gauge Port\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003e1,000,000 Mile Motor\u003c\/li\u003e\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\u003cli\u003eQuietest Motor On The Market\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2011-2016 Ford F-250\/F-350 6.7L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eS\u0026amp;S CP4 to DCR Conversion Kit\u003c\/li\u003e\n\u003cli\u003eFASS Titanium Signature Series Diesel Fuel System 290F 240GPH ( 60-65 PSI)\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082740719773,"sku":"TSF17290F240G | 6.7F-DCR-1","price":3249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198827242.png?v=1784823272"},{"product_id":"fass-140gph-fuel-lift-pump-ss-cp4-to-dcr-kit-for-17-21-ford-6-7l-powerstroke-tsf18140g-6-7f-dcr","title":"FASS 140GPH Fuel Lift Pump \u0026 S\u0026S CP4 To DCR Kit For 17-21 Ford 6.7L Powerstroke","description":"\u003cp\u003eLooking to switch to the popular S\u0026amp;S Diesel CP4 to DCR kit, and add an FASS lift pump to your truck? Rudy's has put a package together including both! Both the FASS lift pump and S\u0026amp;S DCR conversion kit include all parts needed to complete installation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eS\u0026amp;S CP4 to DCR Conversion Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CP4 high-pressure fuel pump in 2011 to current Ford Super Duty diesel trucks has a well-earned reputation for failing without warning, creating sudden power loss, and taking out the expensive high-pressure fuel system in the process. Despite having to deal with being broken down on the side of the road, truck owners will be facing fuel system repairs that can easily exceed $10,000. The unreliable reputation is supported by recalls and lawsuits leveled at various auto manufacturers that use the CP4 in their production vehicles.\u003c\/p\u003e\n\u003cp\u003eS\u0026amp;S Diesel Motorsport™, the common rail diesel injection experts, teamed up with PurePower Technologies, Inc.®, the aftermarket division of longstanding fuel system manufacturer, Stanadyne®, to do the impossible. Collectively, they solved the widely-known CP4 fuel pump problem plaguing Ford Super Duty trucks using the 6.7L Power Stroke diesel engine.\u003c\/p\u003e\n\u003cp\u003eThe joint S\u0026amp;S Diesel Motorsport and PurePower engineering team has changed the game by developing a more durable plug-and-play-replacement pump, with OE fit and function, for the CP4.\u003c\/p\u003e\n\u003cp\u003eWith a price of $2,400.00 USD, the S\u0026amp;S Diesel Motorsport Ford 6.7L CP4 to DCR Pump Conversion can save Ford truck owners $10,000 to $15,000 in repairs. Owners can install peace of mind knowing their daily workhorse isn’t going to lay down on them. The DCR Pump Conversion is emissions compliant (SEMA Cert #SC-SDM01-0034) and fits 2011 to 2022 Ford F250-F750 diesel trucks.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMore durable plug-and-play replacement for the CP4\u003c\/li\u003e\n\u003cli\u003eDoes not require any ECU calibration\u003c\/li\u003e\n\u003cli\u003eOE fit and function\u003c\/li\u003e\n\u003cli\u003eTwo-piston DCR pump co-developed by S\u0026amp;S\/PurePower\u003c\/li\u003e\n\u003cli\u003eBiofuel and low-lubricity fuel compatible\u003c\/li\u003e\n\u003cli\u003ePatented Eccentric Drive pumping technology\u003c\/li\u003e\n\u003cli\u003ePressure-lubricated cam and bushings\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant FCA\u003c\/li\u003e\n\u003cli\u003e1,250 mm\u003csup\u003e3\u003c\/sup\u003e\/revolution displacement\u003c\/li\u003e\n\u003cli\u003eSEMA Certified Emissions Compliant\u003c\/li\u003e\n\u003cli\u003eTwo-year, unlimited-mile warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFASS Fuel System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Titanium Signature Series diesel fuel System was engineered by FASS Diesel Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration System in the diesel industry. Rated at 140 gallons per hour and backed by our limited lifetime warranty the Titanium Signature Series fuel System can support your Ford Powerstroke 6.7L diesel engine with enough fuel for up to 700 HP.\u003c\/p\u003e\n\u003cp\u003eA Titanium Signature Series fuel System also offers advanced filtration benefits that will help protect your Powerstroke injection Systems, effectively extending the life of both your Injection System and Injectors. These Benefits include an improved filtration rating of 2 Microns, a built-in water separation filter and FASS Diesel Fuel Systems patented air\/vapor removal process. Powerstroke diesel engines are known for having injector failure issues; this can be caused by several different factors and FASS Filtration Systems is designed to eliminate those that are fuel related.\u003c\/p\u003e\n\u003cp\u003eThe Titanium Signature Series diesel fuel Systems are the superior fuel System and filtration System, in the diesel industry. This is because here at FASS Diesel Fuel Systems we focus on perfecting our Systems and how they are engineered, taking the extra steps that our competitors ignore while they rush to get product out the door. By doing this we have less than a 2% failure rating with our motor and a design that implements unique design features you can only get with FASS Diesel Fuel Systems.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew Whisper Technology\u003c\/li\u003e\n\u003cli\u003eComplete Replacement System\u003c\/li\u003e\n\u003cli\u003e140 Gallons Per Hour Flow Rating\u003c\/li\u003e\n\u003cli\u003eRemoves Water, Air and Debris From Diesel Fuel\u003c\/li\u003e\n\u003cli\u003e2 Micron Filtration Rating\u003c\/li\u003e\n\u003cli\u003eProtects and Extends The Life Of Your Injectors\u003c\/li\u003e\n\u003cli\u003eImproved Cold Weather Starts\u003c\/li\u003e\n\u003cli\u003eDecreases Carbon Monoxide and Carbon Dioxide Emissions\u003c\/li\u003e\n\u003cli\u003e½ Inch Fuel Lines and Ports\u003c\/li\u003e\n\u003cli\u003eFuel Mileage Improvement\u003c\/li\u003e\n\u003cli\u003eImproved Fuel Volume Delivery\u003c\/li\u003e\n\u003cli\u003eSmoother Engine Idle\u003c\/li\u003e\n\u003cli\u003eOptional Electric Heater Ports\u003c\/li\u003e\n\u003cli\u003eOptional Fuel Pressure Gauge Port\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003e1,000,000 Mile Motor\u003c\/li\u003e\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\u003cli\u003eQuietest Motor On The Market\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2017-2021 Ford F-250\/F-350 6.7L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eS\u0026amp;S DCR Conversion Kit\u003c\/li\u003e\n\u003cli\u003eFASS Titanium Signature Series Diesel Fuel System 180F 140GPH, (65 PSI)\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082741768349,"sku":"TSF18180F140G | 6.7F-DCR-1","price":3249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198827251.png?v=1784750588"},{"product_id":"fass-220gph-fuel-lift-pump-ss-cp4-to-dcr-kit-for-17-22-ford-6-7l-powerstroke-tsf18220g-6-7f-dcr","title":"FASS 220GPH Fuel Lift Pump \u0026 S\u0026S CP4 To DCR Kit For 17-22 Ford 6.7L Powerstroke","description":"\u003cp\u003eLooking to switch to the popular S\u0026amp;S Diesel CP4 to DCR kit, and add an FASS lift pump to your truck? Rudy's has put a package together including both! Both the FASS lift pump and S\u0026amp;S DCR conversion kit include all parts needed to complete installation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eS\u0026amp;S CP4 to DCR Conversion Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CP4 high-pressure fuel pump in 2011 to current Ford Super Duty diesel trucks has a well-earned reputation for failing without warning, creating sudden power loss, and taking out the expensive high-pressure fuel system in the process. Despite having to deal with being broken down on the side of the road, truck owners will be facing fuel system repairs that can easily exceed $10,000. The unreliable reputation is supported by recalls and lawsuits leveled at various auto manufacturers that use the CP4 in their production vehicles.\u003c\/p\u003e\n\u003cp\u003eS\u0026amp;S Diesel Motorsport™, the common rail diesel injection experts, teamed up with PurePower Technologies, Inc.®, the aftermarket division of longstanding fuel system manufacturer, Stanadyne®, to do the impossible. Collectively, they solved the widely-known CP4 fuel pump problem plaguing Ford Super Duty trucks using the 6.7L Power Stroke diesel engine.\u003c\/p\u003e\n\u003cp\u003eThe joint S\u0026amp;S Diesel Motorsport and PurePower engineering team has changed the game by developing a more durable plug-and-play-replacement pump, with OE fit and function, for the CP4.\u003c\/p\u003e\n\u003cp\u003eWith a price of $2,400.00 USD, the S\u0026amp;S Diesel Motorsport Ford 6.7L CP4 to DCR Pump Conversion can save Ford truck owners $10,000 to $15,000 in repairs. Owners can install peace of mind knowing their daily workhorse isn’t going to lay down on them. The DCR Pump Conversion is emissions compliant (SEMA Cert #SC-SDM01-0034) and fits 2011 to 2022 Ford F250-F750 diesel trucks.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMore durable plug-and-play replacement for the CP4\u003c\/li\u003e\n\u003cli\u003eDoes not require any ECU calibration\u003c\/li\u003e\n\u003cli\u003eOE fit and function\u003c\/li\u003e\n\u003cli\u003eTwo-piston DCR pump co-developed by S\u0026amp;S\/PurePower\u003c\/li\u003e\n\u003cli\u003eBiofuel and low-lubricity fuel compatible\u003c\/li\u003e\n\u003cli\u003ePatented Eccentric Drive pumping technology\u003c\/li\u003e\n\u003cli\u003ePressure-lubricated cam and bushings\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant FCA\u003c\/li\u003e\n\u003cli\u003e1,250 mm\u003csup\u003e3\u003c\/sup\u003e\/revolution displacement\u003c\/li\u003e\n\u003cli\u003eSEMA Certified Emissions Compliant\u003c\/li\u003e\n\u003cli\u003eTwo-year, unlimited-mile warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFASS Fuel System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Titanium Signature Series diesel fuel System was engineered by FASS Diesel Fuel Systems to be the top-performing, longest-lasting and most reliable aftermarket filtration System in the diesel industry. Rated at 220 gallons per hour, at 65 PSI, and backed by our limited lifetime warranty the Titanium Signature Series fuel System can support your Ford Powerstroke Diesel engine with enough fuel for 600-900 HP. A Titanium Signature Series fuel System also offers advanced filtration benefits that will help protect your Powerstroke’s injection Systems, effectively extending the life of your Diesel Injectors. These Benefits include FASS Diesel Fuel Systems patented air\/vapor removal process. Powerstroke diesel engines are known for having injector failure issues; this can be caused by several different factors and FASS Filtration Systems is designed to eliminate those that are fuel related.\u003c\/p\u003e\n\u003cp\u003eThe Titanium Signature Series diesel fuel Systems are the superior fuel System and filtration System, in the diesel industry. This is because here at FASS Diesel Fuel Systems we focus on perfecting our Systems and how they are engineered, taking the extra steps that our competitors ignore while they rush to get product out the door. By doing this we have less than a 2% failure rating with our motor and a design that implements unique design features you can only get with FASS Diesel Fuel Systems.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew Whisper Technology\u003c\/li\u003e\n\u003cli\u003eBolt On Bracket Installation\u003c\/li\u003e\n\u003cli\u003ePreset 65 PSI Fuel Pressure\u003c\/li\u003e\n\u003cli\u003eComplete Replacement System\u003c\/li\u003e\n\u003cli\u003e220 Gallons Per Hour Flow Rating\u003c\/li\u003e\n\u003cli\u003eRemoves Water, Air and Debris From Diesel Fuel\u003c\/li\u003e\n\u003cli\u003e2 Microns Absolute Filtration Rating\u003c\/li\u003e\n\u003cli\u003eProtects and Extends The Life Of Your Injectors\u003c\/li\u003e\n\u003cli\u003eImproved Cold Weather Starts\u003c\/li\u003e\n\u003cli\u003eDecreases Carbon Monoxide and Carbon Dioxide Emissions\u003c\/li\u003e\n\u003cli\u003e½ Inch Fuel Lines and Ports\u003c\/li\u003e\n\u003cli\u003eFuel Mileage Improvement\u003c\/li\u003e\n\u003cli\u003eImproved Fuel Volume Delivery\u003c\/li\u003e\n\u003cli\u003eSmoother Engine Idle\u003c\/li\u003e\n\u003cli\u003eOptional Electric Heater Ports\u003c\/li\u003e\n\u003cli\u003eOptional Fuel Pressure Gauge Port\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003e1,000,000 Mile Motor\u003c\/li\u003e\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\u003cli\u003eQuietest Motor On The Market\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2017-2022 Ford F-250\/F-350 6.7L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eS\u0026amp;S DCR Conversion Kit\u003c\/li\u003e\n\u003cli\u003eFASS Titanium Signature Series Diesel Fuel System 250F 220GPH (65 PSI)\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082743734429,"sku":"TSF18250F220G | 6.7F-DCR-1","price":3299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198827268.png?v=1784817926"},{"product_id":"fass-240gph-fuel-lift-pump-ss-cp4-to-dcr-kit-for-17-21-ford-6-7l-powerstroke-tsf18240g-6-7f-dcr","title":"FASS 240GPH Fuel Lift Pump \u0026 S\u0026S CP4 To DCR Kit For 17-21 Ford 6.7L Powerstroke","description":"\u003cp\u003eLooking to switch to the popular S\u0026amp;S Diesel CP4 to DCR kit, and add an FASS lift pump to your truck? Rudy's has put a package together including both! Both the FASS lift pump and S\u0026amp;S DCR conversion kit include all parts needed to complete installation.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eS\u0026amp;S CP4 to DCR Conversion Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe CP4 high-pressure fuel pump in 2011 to current Ford Super Duty diesel trucks has a well-earned reputation for failing without warning, creating sudden power loss, and taking out the expensive high-pressure fuel system in the process. Despite having to deal with being broken down on the side of the road, truck owners will be facing fuel system repairs that can easily exceed $10,000. The unreliable reputation is supported by recalls and lawsuits leveled at various auto manufacturers that use the CP4 in their production vehicles.\u003c\/p\u003e\n\u003cp\u003eS\u0026amp;S Diesel Motorsport™, the common rail diesel injection experts, teamed up with PurePower Technologies, Inc.®, the aftermarket division of longstanding fuel system manufacturer, Stanadyne®, to do the impossible. Collectively, they solved the widely-known CP4 fuel pump problem plaguing Ford Super Duty trucks using the 6.7L Power Stroke diesel engine.\u003c\/p\u003e\n\u003cp\u003eThe joint S\u0026amp;S Diesel Motorsport and PurePower engineering team has changed the game by developing a more durable plug-and-play-replacement pump, with OE fit and function, for the CP4.\u003c\/p\u003e\n\u003cp\u003eWith a price of $2,400.00 USD, the S\u0026amp;S Diesel Motorsport Ford 6.7L CP4 to DCR Pump Conversion can save Ford truck owners $10,000 to $15,000 in repairs. Owners can install peace of mind knowing their daily workhorse isn’t going to lay down on them. The DCR Pump Conversion is emissions compliant (SEMA Cert #SC-SDM01-0034) and fits 2011 to 2022 Ford F250-F750 diesel trucks.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMore durable plug-and-play replacement for the CP4\u003c\/li\u003e\n\u003cli\u003eDoes not require any ECU calibration\u003c\/li\u003e\n\u003cli\u003eOE fit and function\u003c\/li\u003e\n\u003cli\u003eTwo-piston DCR pump co-developed by S\u0026amp;S\/PurePower\u003c\/li\u003e\n\u003cli\u003eBiofuel and low-lubricity fuel compatible\u003c\/li\u003e\n\u003cli\u003ePatented Eccentric Drive pumping technology\u003c\/li\u003e\n\u003cli\u003ePressure-lubricated cam and bushings\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant FCA\u003c\/li\u003e\n\u003cli\u003e1,250 mm3\/revolution displacement\u003c\/li\u003e\n\u003cli\u003eSEMA Certified Emissions Compliant\u003c\/li\u003e\n\u003cli\u003eTwo-year, unlimited-mile warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFASS Fuel System\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Titanium Signature Series diesel fuel System was engineered by FASS Diesel Fuel Systems to be the top-performing, longest-lasting, and most reliable aftermarket filtration System in the diesel industry. Rated at 240 gallons per hour, at 65 PSI, and backed by our limited lifetime warranty the Titanium Signature Series fuel System can support your Ford Powerstroke Diesel engine with enough fuel for 900-1200 HP. A Titanium Signature Series fuel System also offers advanced filtration benefits that will help protect your Powerstroke’s injection Systems, effectively extending the life of your Diesel Injectors. These Benefits include FASS Diesel Fuel Systems patented air\/vapor removal process. Powerstroke diesel engines are known for having injector failure issues; this can be caused by several different factors and FASS Filtration Systems is designed to eliminate those that are fuel related.\u003c\/p\u003e\n\u003cp\u003eThe Titanium Signature Series diesel fuel Systems are the superior fuel System and filtration System, in the diesel industry. This is because here at FASS Diesel Fuel Systems we focus on perfecting our Systems and how they are engineered, taking the extra steps that our competitors ignore while they rush to get product out the door. By doing this we have less than a 2% failure rating with our motor and a design that implements unique design features you can only get with FASS Diesel Fuel Systems.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew Whisper Technology\u003c\/li\u003e\n\u003cli\u003eBolt On Bracket Installation\u003c\/li\u003e\n\u003cli\u003ePreset 65 PSI Fuel Pressure\u003c\/li\u003e\n\u003cli\u003eComplete Replacement System\u003c\/li\u003e\n\u003cli\u003e240 Gallons Per Hour Flow Rating\u003c\/li\u003e\n\u003cli\u003eRemoves Water, Air and Debris From Diesel Fuel\u003c\/li\u003e\n\u003cli\u003e2 Microns Absolute Filtration Rating\u003c\/li\u003e\n\u003cli\u003eProtects and Extends The Life Of Your Injectors\u003c\/li\u003e\n\u003cli\u003eImproved Cold Weather Starts\u003c\/li\u003e\n\u003cli\u003eDecreases Carbon Monoxide and Carbon Dioxide Emissions\u003c\/li\u003e\n\u003cli\u003e½ Inch Fuel Lines and Ports\u003c\/li\u003e\n\u003cli\u003eFuel Mileage Improvement\u003c\/li\u003e\n\u003cli\u003eImproved Fuel Volume Delivery\u003c\/li\u003e\n\u003cli\u003eSmoother Engine Idle\u003c\/li\u003e\n\u003cli\u003eOptional Electric Heater Ports\u003c\/li\u003e\n\u003cli\u003eOptional Fuel Pressure Gauge Port\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003e1,000,000 Mile Motor\u003c\/li\u003e\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\u003cli\u003eQuietest Motor On The Market\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2017-2021 Ford F-250\/F-350 6.7L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eS\u0026amp;S DCR Conversion Kit\u003c\/li\u003e\n\u003cli\u003eFASS Titanium Signature Series Diesel Fuel System 290F 240GPH (65 PSI)\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082744062109,"sku":"TSF18290F240G | 6.7F-DCR-1","price":3349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198827278.png?v=1784823367"},{"product_id":"fass-140gph-pump-ss-disaster-prevention-kit-for-11-16-ford-6-7l-powerstroke-tsf17140g-cp4-6-7f-bp-g2-1","title":"FASS 140GPH Pump \u0026 S\u0026S Disaster Prevention Kit For 11-16 Ford 6.7L Powerstroke","description":"\u003cp\u003e\u003cstrong\u003eS\u0026amp;S CP4 Disaster Prevention Kit\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eS\u0026amp;S Diesel Motorsport, the creator of the original Disaster Prevention Kit for the 6.7 Power Stroke, is at it again with a much-improved second generation kit. Since its debut in 2016, the original S\u0026amp;S 6.7L Power Stroke CP4 Bypass Kit (Disaster Prevention Kit) has safeguarded thousands of injectors from CP4 debris. In fact, it works so well that it has been copied by multiple opportunists within the aftermarket. Being a company founded by fuel system engineers, S\u0026amp;S Diesel Motorsport has the ability, and responsibility, to offer the best solutions to fuel system problems. While the original bypass kit offers really good protection from a CP4 failure, the last four years have given the S\u0026amp;S engineers plenty of time to discover and eliminate potential problems.\u003c\/p\u003e\n\n\u003cp\u003eThe S\u0026amp;S Diesel Motorsport Gen2.1 6.7L Power Stroke CP4 Disaster Prevention Kit features all quick connect lines that will eliminate the need for cutting the factory supply line, which is a debris introduction point, especially if the cut is not thoroughly deburred. It also eliminates the need to use a compression fitting, which is a potential leak point. The OE-style quick connect lines also eliminate any threaded joints that are further leak points and have the potential of generating debris during install.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNew and improved Gen2.1 Disaster Prevention Kit\u003c\/li\u003e\n\n\u003cli\u003eSafeguards fuel injectors, rails, lines, and tank from CP4 debris\u003c\/li\u003e\n\n\u003cli\u003eThoroughly validated and proven to work in real-world testing\u003c\/li\u003e\n\n\u003cli\u003eAll OE-style quick connects (easy install)\u003c\/li\u003e\n\n\u003cli\u003eFuel supply split-off 25 inches away from the CP4 pump\u003c\/li\u003e\n\n\u003cli\u003eReturn filter isolates CP4 debris before it goes on to the tank\u003c\/li\u003e\n\n\u003cli\u003eGen2.1 billet filter head accepts standard spin-on fuel filters\u003c\/li\u003e\n\n\u003cli\u003eComes with Donaldson P550943 fuel filter (9-micron at 99% efficiency)\u003c\/li\u003e\n\n\u003cli\u003eOne part number fits all years (2011+)\u003c\/li\u003e\n\n\u003cli\u003eImproves CP4 output past 3,000 RPM (see data below)\u003c\/li\u003e\n\n\u003cli\u003eCan extend the range of a truck during a CP4 failure\u003c\/li\u003e\n\n\u003cli\u003eCARB Compliant (EO# D-756-6)\u003c\/li\u003e\n\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFASS Fuel System\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Titanium Signature Series diesel fuel System Featuring our Revolutionary Whisper Technology was engineered by FASS Diesel Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration System in the diesel industry. Rated at 140 gallons per hour, high pressures of 70PSI and backed by our limited lifetime warranty the Titanium Signature Series fuel System is capable of supporting your Ford Powerstroke 6.7L diesel engine with enough fuel for aggressive tuning and fuel System upgrades up to 700 HP A Titanium Signature Series fuel System also offers advanced filtration benefits that will help protect your Powerstroke injection Systems, effectively extending the life of both your Injection System and Injectors. These Benefits include an improved filtration rating of 2 Microns, a built-in water separation filter, and FASS Diesel Fuel Systems patented air\/vapor removal process. Aftermarket Systems are important for both drivers and high-performance applications when looking to improve either fuel economy or increase horsepower\/torque.\u003c\/p\u003e\n\n\u003cp\u003eThis kit includes a FASS BHF-1005 (Bulkhead and Suction Tube Kit). Machined from 6061 T-6 Billet Aluminum. This Bulkhead fitting is designed to mount directly to the factory fuel tank module (sending unit) to allow the FASS to directly draw and return fuel to the fuel tank module, effectively eliminating all 1\/4 tank and 1\/8 tank issues when installed correctly. The pickup tube is fabricated out of PTFE Teflon which can be easily cut to adapt to different depth of fuel tanks. Properly installed, you can safely operate down to approximately 0 miles until empty.\u003c\/p\u003e\n\n\u003cp\u003eThe Titanium Signature Series diesel fuel Systems are the superior fuel System and filtration System, in the diesel industry. This is because here at FASS Diesel Fuel Systems we focus on perfecting our Systems and how they are engineered, taking the extra steps that our competitors ignore while they rush to get the product out the door. By doing this we have less than a 2% failure rating with our motor and a design that implements unique design features you can only get with FASS Diesel Fuel Systems\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNew Whisper Technology\u003c\/li\u003e\n\n\u003cli\u003eNew Bolt On Bracket Installation\u003c\/li\u003e\n\n\u003cli\u003ePreset 60-65 PSI Fuel Pressure\u003c\/li\u003e\n\n\u003cli\u003eComplete Replacement System\u003c\/li\u003e\n\n\u003cli\u003e140 Gallons Per Hour Flow Rating\u003c\/li\u003e\n\n\u003cli\u003eRemoves Water, Air and Debris From Diesel Fuel\u003c\/li\u003e\n\n\u003cli\u003e2 Micron Filtration Rating\u003c\/li\u003e\n\n\u003cli\u003eProtects and Extends The Life Of Your Injectors\u003c\/li\u003e\n\n\u003cli\u003eImproved Cold Weather Starts\u003c\/li\u003e\n\n\u003cli\u003eDecreases Carbon Monoxide and Carbon Dioxide Emissions\u003c\/li\u003e\n\n\u003cli\u003e½ Inch Fuel Lines and Ports\u003c\/li\u003e\n\n\u003cli\u003eFuel Mileage Improvement\u003c\/li\u003e\n\n\u003cli\u003eImproved Fuel Volume Delivery\u003c\/li\u003e\n\n\u003cli\u003eSmoother Engine Idle\u003c\/li\u003e\n\n\u003cli\u003eOptional Electric Heater Ports\u003c\/li\u003e\n\n\u003cli\u003eOptional Fuel Pressure Gauge Port\u003c\/li\u003e\n\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\n\u003cli\u003e1,000,000 Mile Motor\u003c\/li\u003e\n\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\n\u003cli\u003eQuietest Motor On The Market\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2011-2016 Ford F-250\/F-350 6.7L Powerstroke\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eS\u0026amp;S CP4 Disaster Prevention Kit\u003c\/li\u003e\n\n\u003cli\u003eFASS Titanium Signature Series Diesel Fuel System 180F 140GPH, (60-65 PSI)\u003c\/li\u003e\n\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082744291485,"sku":"TSF17180F140G | CP4-6.7F-BP-G2.1","price":1159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198827288.png?v=1784830426"},{"product_id":"fass-220gph-pump-ss-disaster-prevention-kit-for-11-16-ford-6-7l-powerstroke-tsf17220g-cp4-6-7f-bp-g2-1","title":"FASS 220GPH Pump \u0026 S\u0026S Disaster Prevention Kit For 11-16 Ford 6.7L Powerstroke","description":"\u003cp\u003e\u003cstrong\u003eS\u0026amp;S CP4 Disaster Prevention Kit\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eS\u0026amp;S Diesel Motorsport, the creator of the original Disaster Prevention Kit for the 6.7 Power Stroke, is at it again with a much-improved second generation kit. Since its debut in 2016, the original S\u0026amp;S 6.7L Power Stroke CP4 Bypass Kit (Disaster Prevention Kit) has safeguarded thousands of injectors from CP4 debris. In fact, it works so well that it has been copied by multiple opportunists within the aftermarket. Being a company founded by fuel system engineers, S\u0026amp;S Diesel Motorsport has the ability, and responsibility, to offer the best solutions to fuel system problems. While the original bypass kit offers really good protection from a CP4 failure, the last four years have given the S\u0026amp;S engineers plenty of time to discover and eliminate potential problems.\u003c\/p\u003e\n\n\u003cp\u003eThe S\u0026amp;S Diesel Motorsport Gen2.1 6.7L Power Stroke CP4 Disaster Prevention Kit features all quick connect lines that will eliminate the need for cutting the factory supply line, which is a debris introduction point, especially if the cut is not thoroughly deburred. It also eliminates the need to use a compression fitting, which is a potential leak point. The OE-style quick connect lines also eliminate any threaded joints that are further leak points and have the potential of generating debris during install.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNew and improved Gen2.1 Disaster Prevention Kit\u003c\/li\u003e\n\n\u003cli\u003eSafeguards fuel injectors, rails, lines, and tank from CP4 debris\u003c\/li\u003e\n\n\u003cli\u003eThoroughly validated and proven to work in real-world testing\u003c\/li\u003e\n\n\u003cli\u003eAll OE-style quick connects (easy install)\u003c\/li\u003e\n\n\u003cli\u003eFuel supply split-off 25 inches away from the CP4 pump\u003c\/li\u003e\n\n\u003cli\u003eReturn filter isolates CP4 debris before it goes on to the tank\u003c\/li\u003e\n\n\u003cli\u003eGen2.1 billet filter head accepts standard spin-on fuel filters\u003c\/li\u003e\n\n\u003cli\u003eComes with Donaldson P550943 fuel filter (9-micron at 99% efficiency)\u003c\/li\u003e\n\n\u003cli\u003eOne part number fits all years (2011+)\u003c\/li\u003e\n\n\u003cli\u003eImproves CP4 output past 3,000 RPM (see data below)\u003c\/li\u003e\n\n\u003cli\u003eCan extend the range of a truck during a CP4 failure\u003c\/li\u003e\n\n\u003cli\u003eCARB Compliant (EO# D-756-6)\u003c\/li\u003e\n\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFASS Fuel System\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Titanium Signature Series diesel fuel System was engineered by FASS Diesel Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration System in the diesel industry. Rated at 220 gallons per hour, high pressures of 65PSI and backed by our limited lifetime warranty the Titanium Signature Series System can support your Ford Powerstroke 6.7L diesel engine with enough fuel for 900-1200 HP aggressive tuning and high-performance fuel System upgrades. A Titanium Signature Series fuel System also offers advanced filtration benefits that will help protect your Powerstroke injection Systems, effectively extending the life of both your Injection System and Injectors. These Benefits include an improved filtration rating of 2 Microns, a built-in water separation filter and FASS Diesel Fuel Systems patented air\/vapor removal process. Aftermarket Systems are important for both drivers and high-performance applications when looking to improve either fuel economy or increase horsepower\/torque.\u003c\/p\u003e\n\n\u003cp\u003eThis kit includes a FASS BHF-1005 (Bulkhead and Suction Tube Kit). Machined from 6061 T-6 Billet Aluminum. This Bulkhead fitting is designed to mount directly to the factory fuel tank module (sending unit) to allow the FASS to directly draw and return fuel to the fuel tank module, effectively eliminating all 1\/4 tank and 1\/8 tank issues when installed correctly. The pickup tube is fabricated out of PTFE Teflon which can be easily cut to adapt to different depth of fuel tanks. Properly installed, you can safely operate down to approximately 0 miles until empty.\u003c\/p\u003e\n\n\u003cp\u003eThe Titanium Signature Series diesel fuel Systems are the superior fuel System and filtration System, in the diesel industry. This is because here at FASS Diesel Fuel Systems we focus on perfecting our Systems and how they are engineered, taking the extra steps that our competitors ignore while they rush to get product out the door. By doing this we have less than a 2% failure rating with our motor and a design that implements unique design features you can only get with FASS Diesel Fuel Systems\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNew Whisper Technology\u003c\/li\u003e\n\n\u003cli\u003eNew Bolt On Bracket Installation\u003c\/li\u003e\n\n\u003cli\u003ePreset 60-65 PSI Fuel Pressure\u003c\/li\u003e\n\n\u003cli\u003eComplete Replacement System\u003c\/li\u003e\n\n\u003cli\u003e200 Gallons Per Hour Flow Rating\u003c\/li\u003e\n\n\u003cli\u003eRemoves Water, Air and Debris From Diesel Fuel\u003c\/li\u003e\n\n\u003cli\u003e2 Micron Filtration Rating\u003c\/li\u003e\n\n\u003cli\u003eProtects and Extends The Life Of Your Injectors\u003c\/li\u003e\n\n\u003cli\u003eImproved Cold Weather Starts\u003c\/li\u003e\n\n\u003cli\u003eDecreases Carbon Monoxide and Carbon Dioxide Emissions\u003c\/li\u003e\n\n\u003cli\u003e½ Inch Fuel Lines and Ports\u003c\/li\u003e\n\n\u003cli\u003eFuel Mileage Improvement\u003c\/li\u003e\n\n\u003cli\u003eImproved Fuel Volume Delivery\u003c\/li\u003e\n\n\u003cli\u003eSmoother Engine Idle\u003c\/li\u003e\n\n\u003cli\u003eOptional Electric Heater Ports\u003c\/li\u003e\n\n\u003cli\u003eOptional Fuel Pressure Gauge Port\u003c\/li\u003e\n\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\n\u003cli\u003e1,000,000 Mile Motor\u003c\/li\u003e\n\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\n\u003cli\u003eQuietest Motor On The Market\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2011-2016 Ford F-250\/F-350 6.7L Powerstroke\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eS\u0026amp;S CP4 Disaster Prevention Kit\u003c\/li\u003e\n\n\u003cli\u003eFASS Titanium Signature Series Diesel Fuel System 250F 220GPH, (60-65 PSI)\u003c\/li\u003e\n\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082745077917,"sku":"TSF17250F220G | CP4-6.7F-BP-G2.1","price":1199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198827304.png?v=1713438975"},{"product_id":"fass-240gph-pump-ss-disaster-prevention-kit-for-11-16-ford-6-7l-powerstroke-tsf17240g-cp4-6-7f-bp-g2-1","title":"FASS 240GPH Pump \u0026 S\u0026S Disaster Prevention Kit For 11-16 Ford 6.7L Powerstroke","description":"\u003cp\u003e\u003cstrong\u003eS\u0026amp;S CP4 Disaster Prevention Kit\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eS\u0026amp;S Diesel Motorsport, the creator of the original Disaster Prevention Kit for the 6.7 Power Stroke, is at it again with a much-improved second generation kit. Since its debut in 2016, the original S\u0026amp;S 6.7L Power Stroke CP4 Bypass Kit (Disaster Prevention Kit) has safeguarded thousands of injectors from CP4 debris. In fact, it works so well that it has been copied by multiple opportunists within the aftermarket. Being a company founded by fuel system engineers, S\u0026amp;S Diesel Motorsport has the ability, and responsibility, to offer the best solutions to fuel system problems. While the original bypass kit offers really good protection from a CP4 failure, the last four years have given the S\u0026amp;S engineers plenty of time to discover and eliminate potential problems.\u003c\/p\u003e\n\n\u003cp\u003eThe S\u0026amp;S Diesel Motorsport Gen2.1 6.7L Power Stroke CP4 Disaster Prevention Kit features all quick connect lines that will eliminate the need for cutting the factory supply line, which is a debris introduction point, especially if the cut is not thoroughly deburred. It also eliminates the need to use a compression fitting, which is a potential leak point. The OE-style quick connect lines also eliminate any threaded joints that are further leak points and have the potential of generating debris during install.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNew and improved Gen2.1 Disaster Prevention Kit\u003c\/li\u003e\n\n\u003cli\u003eSafeguards fuel injectors, rails, lines, and tank from CP4 debris\u003c\/li\u003e\n\n\u003cli\u003eThoroughly validated and proven to work in real-world testing\u003c\/li\u003e\n\n\u003cli\u003eAll OE-style quick connects (easy install)\u003c\/li\u003e\n\n\u003cli\u003eFuel supply split-off 25 inches away from the CP4 pump\u003c\/li\u003e\n\n\u003cli\u003eReturn filter isolates CP4 debris before it goes on to the tank\u003c\/li\u003e\n\n\u003cli\u003eGen2.1 billet filter head accepts standard spin-on fuel filters\u003c\/li\u003e\n\n\u003cli\u003eComes with Donaldson P550943 fuel filter (9-micron at 99% efficiency)\u003c\/li\u003e\n\n\u003cli\u003eOne part number fits all years (2011+)\u003c\/li\u003e\n\n\u003cli\u003eImproves CP4 output past 3,000 RPM (see data below)\u003c\/li\u003e\n\n\u003cli\u003eCan extend the range of a truck during a CP4 failure\u003c\/li\u003e\n\n\u003cli\u003eCARB Compliant (EO# D-756-6)\u003c\/li\u003e\n\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFASS Fuel System\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Titanium Signature Series diesel fuel System was engineered by FASS Diesel Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration System in the diesel industry. Rated at 240 gallons per hour, high pressures of 70PSI perfect for competition use and backed by our limited lifetime warranty the Titanium Signature Series fuel System can support your Ford Powerstroke 6.7L diesel engine with enough fuel for 900-1200 HP aggressive tuning and high-performance fuel System upgrades. A Titanium Signature Series fuel System also offers advanced filtration benefits that will help protect your Powerstroke injection Systems, effectively extending the life of both your Injection System and Injectors. These Benefits include an improved filtration rating of 2 Microns, a built-in water separation filter and FASS Fuel Systems patented air\/vapor removal process. Aftermarket Systems are important for both drivers and high-performance applications when looking to improve either fuel economy or increase horsepower\/torque.\u003c\/p\u003e\n\n\u003cp\u003eThis kit includes a FASS BHF-1005 (Bulkhead and Suction Tube Kit). Machined from 6061 T-6 Billet Aluminum. This Bulkhead fitting is designed to mount directly to the factory fuel tank module (sending unit) to allow the FASS to directly draw and return fuel to the fuel tank module, effectively eliminating all 1\/4 tank and 1\/8 tank issues when installed correctly. The pickup tube is fabricated out of PTFE Teflon which can be easily cut to adapt to different depth of fuel tanks. Properly installed, you can safely operate down to approximately 0 miles until empty.\u003c\/p\u003e\n\n\u003cp\u003eThe Titanium Signature Series diesel fuel Systems are the superior fuel System and filtration System, in the diesel industry. This is because here at FASS Diesel Fuel Systems we focus on perfecting our Systems and how they are engineered, taking the extra steps that our competitors ignore while they rush to get product out the door. By doing this we have less than a 2% failure rating with our motor and a design that implements unique design features you can only get with FASS Diesel Fuel Systems.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNew Whisper Technology\u003c\/li\u003e\n\n\u003cli\u003eNew Bolt On Bracket Installation\u003c\/li\u003e\n\n\u003cli\u003ePreset 60-65 PSI Fuel Pressure\u003c\/li\u003e\n\n\u003cli\u003eComplete Replacement System\u003c\/li\u003e\n\n\u003cli\u003e240 Gallons Per Hour Flow Rating\u003c\/li\u003e\n\n\u003cli\u003eRemoves Water, Air and Debris From Diesel Fuel\u003c\/li\u003e\n\n\u003cli\u003e2 Micron Filtration Rating\u003c\/li\u003e\n\n\u003cli\u003eProtects and Extends The Life Of Your Injectors\u003c\/li\u003e\n\n\u003cli\u003eImproved Cold Weather Starts\u003c\/li\u003e\n\n\u003cli\u003eDecreases Carbon Monoxide and Carbon Dioxide Emissions\u003c\/li\u003e\n\n\u003cli\u003e½ Inch Fuel Lines and Ports\u003c\/li\u003e\n\n\u003cli\u003eIncludes Bulkhead Fitting and Suction Tube Kit\u003c\/li\u003e\n\n\u003cli\u003eFuel Mileage Improvement\u003c\/li\u003e\n\n\u003cli\u003eImproved Fuel Volume Delivery\u003c\/li\u003e\n\n\u003cli\u003eSmoother Engine Idle\u003c\/li\u003e\n\n\u003cli\u003eOptional Electric Heater Ports\u003c\/li\u003e\n\n\u003cli\u003eOptional Fuel Pressure Gauge Port\u003c\/li\u003e\n\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\n\u003cli\u003e1,000,000 Mile Motor\u003c\/li\u003e\n\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\n\u003cli\u003eQuietest Motor On The Market\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2011-2016 Ford F-250\/F-350 6.7L Powerstroke\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eS\u0026amp;S CP4 Disaster Prevention Kit\u003c\/li\u003e\n\n\u003cli\u003eFASS Titanium Signature Series Diesel Fuel System 290F 240GPH ( 60-65 PSI)\u003c\/li\u003e\n\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082746618013,"sku":"TSF17290F240G | CP4-6.7F-BP-G2.1","price":1249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198827319.png?v=1784821271"},{"product_id":"fass-140gph-pump-ss-disaster-prevention-kit-for-17-21-ford-6-7l-powerstroke-tsf18140g-cp4-6-7f-bp-g2-1","title":"FASS 140GPH Pump \u0026 S\u0026S Disaster Prevention Kit For 17-21 Ford 6.7L Powerstroke","description":"\u003cp\u003e\u003cstrong\u003eS\u0026amp;S CP4 Disaster Prevention Kit\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eS\u0026amp;S Diesel Motorsport, the creator of the original Disaster Prevention Kit for the 6.7 Power Stroke, is at it again with a much-improved second generation kit. Since its debut in 2016, the original S\u0026amp;S 6.7L Power Stroke CP4 Bypass Kit (Disaster Prevention Kit) has safeguarded thousands of injectors from CP4 debris. In fact, it works so well that it has been copied by multiple opportunists within the aftermarket. Being a company founded by fuel system engineers, S\u0026amp;S Diesel Motorsport has the ability, and responsibility, to offer the best solutions to fuel system problems. While the original bypass kit offers really good protection from a CP4 failure, the last four years have given the S\u0026amp;S engineers plenty of time to discover and eliminate potential problems.\u003c\/p\u003e\n\n\u003cp\u003eThe S\u0026amp;S Diesel Motorsport Gen2.1 6.7L Power Stroke CP4 Disaster Prevention Kit features all quick connect lines that will eliminate the need for cutting the factory supply line, which is a debris introduction point, especially if the cut is not thoroughly deburred. It also eliminates the need to use a compression fitting, which is a potential leak point. The OE-style quick connect lines also eliminate any threaded joints that are further leak points and have the potential of generating debris during install.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNew and improved Gen2.1 Disaster Prevention Kit\u003c\/li\u003e\n\n\u003cli\u003eSafeguards fuel injectors, rails, lines, and tank from CP4 debris\u003c\/li\u003e\n\n\u003cli\u003eThoroughly validated and proven to work in real-world testing\u003c\/li\u003e\n\n\u003cli\u003eAll OE-style quick connects (easy install)\u003c\/li\u003e\n\n\u003cli\u003eFuel supply split-off 25 inches away from the CP4 pump\u003c\/li\u003e\n\n\u003cli\u003eReturn filter isolates CP4 debris before it goes on to the tank\u003c\/li\u003e\n\n\u003cli\u003eGen2.1 billet filter head accepts standard spin-on fuel filters\u003c\/li\u003e\n\n\u003cli\u003eComes with Donaldson P550943 fuel filter (9-micron at 99% efficiency)\u003c\/li\u003e\n\n\u003cli\u003eOne part number fits all years (2011+)\u003c\/li\u003e\n\n\u003cli\u003eImproves CP4 output past 3,000 RPM (see data below)\u003c\/li\u003e\n\n\u003cli\u003eCan extend the range of a truck during a CP4 failure\u003c\/li\u003e\n\n\u003cli\u003eCARB Compliant (EO# D-756-6)\u003c\/li\u003e\n\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFASS Fuel System\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Titanium Signature Series diesel fuel System was engineered by FASS Diesel Fuel Systems to be the top performing, longest lasting and most reliable aftermarket filtration System in the diesel industry. Rated at 140 gallons per hour and backed by our limited lifetime warranty the Titanium Signature Series fuel System can support your Ford Powerstroke 6.7L diesel engine with enough fuel for up to 700 HP.\u003c\/p\u003e\n\n\u003cp\u003eA Titanium Signature Series fuel System also offers advanced filtration benefits that will help protect your Powerstroke injection Systems, effectively extending the life of both your Injection System and Injectors. These Benefits include an improved filtration rating of 2 Microns, a built-in water separation filter and FASS Diesel Fuel Systems patented air\/vapor removal process. Powerstroke diesel engines are known for having injector failure issues; this can be caused by several different factors and FASS Filtration Systems is designed to eliminate those that are fuel related.\u003c\/p\u003e\n\n\u003cp\u003eThe Titanium Signature Series diesel fuel Systems are the superior fuel System and filtration System, in the diesel industry. This is because here at FASS Diesel Fuel Systems we focus on perfecting our Systems and how they are engineered, taking the extra steps that our competitors ignore while they rush to get product out the door. By doing this we have less than a 2% failure rating with our motor and a design that implements unique design features you can only get with FASS Diesel Fuel Systems.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNew Whisper Technology\u003c\/li\u003e\n\n\u003cli\u003eComplete Replacement System\u003c\/li\u003e\n\n\u003cli\u003e140 Gallons Per Hour Flow Rating\u003c\/li\u003e\n\n\u003cli\u003eRemoves Water, Air and Debris From Diesel Fuel\u003c\/li\u003e\n\n\u003cli\u003e2 Micron Filtration Rating\u003c\/li\u003e\n\n\u003cli\u003eProtects and Extends The Life Of Your Injectors\u003c\/li\u003e\n\n\u003cli\u003eImproved Cold Weather Starts\u003c\/li\u003e\n\n\u003cli\u003eDecreases Carbon Monoxide and Carbon Dioxide Emissions\u003c\/li\u003e\n\n\u003cli\u003e½ Inch Fuel Lines and Ports\u003c\/li\u003e\n\n\u003cli\u003eFuel Mileage Improvement\u003c\/li\u003e\n\n\u003cli\u003eImproved Fuel Volume Delivery\u003c\/li\u003e\n\n\u003cli\u003eSmoother Engine Idle\u003c\/li\u003e\n\n\u003cli\u003eOptional Electric Heater Ports\u003c\/li\u003e\n\n\u003cli\u003eOptional Fuel Pressure Gauge Port\u003c\/li\u003e\n\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\n\u003cli\u003e1,000,000 Mile Motor\u003c\/li\u003e\n\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\n\u003cli\u003eQuietest Motor On The Market\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2017-2021 Ford F-250\/F-350 6.7L Powerstroke\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eS\u0026amp;S CP4 Disaster Prevention Kit\u003c\/li\u003e\n\n\u003cli\u003eFASS Titanium Signature Series Diesel Fuel System 180F 140GPH, (65 PSI)\u003c\/li\u003e\n\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082746650781,"sku":"TSF18180F140G | CP4-6.7F-BP-G2.1","price":1249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198827328.png?v=1784830447"},{"product_id":"fass-220gph-pump-ss-disaster-prevention-kit-for-17-22-ford-6-7l-powerstroke-tsf18220g-cp4-6-7f-bp-g2-1","title":"FASS 220GPH Pump \u0026 S\u0026S Disaster Prevention Kit For 17-22 Ford 6.7L Powerstroke","description":"\u003cp\u003e\u003cstrong\u003eS\u0026amp;S CP4 Disaster Prevention Kit\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eS\u0026amp;S Diesel Motorsport, the creator of the original Disaster Prevention Kit for the 6.7 Power Stroke, is at it again with a much-improved second generation kit. Since its debut in 2016, the original S\u0026amp;S 6.7L Power Stroke CP4 Bypass Kit (Disaster Prevention Kit) has safeguarded thousands of injectors from CP4 debris. In fact, it works so well that it has been copied by multiple opportunists within the aftermarket. Being a company founded by fuel system engineers, S\u0026amp;S Diesel Motorsport has the ability, and responsibility, to offer the best solutions to fuel system problems. While the original bypass kit offers really good protection from a CP4 failure, the last four years have given the S\u0026amp;S engineers plenty of time to discover and eliminate potential problems.\u003c\/p\u003e\n\n\u003cp\u003eThe S\u0026amp;S Diesel Motorsport Gen2.1 6.7L Power Stroke CP4 Disaster Prevention Kit features all quick connect lines that will eliminate the need for cutting the factory supply line, which is a debris introduction point, especially if the cut is not thoroughly deburred. It also eliminates the need to use a compression fitting, which is a potential leak point. The OE-style quick connect lines also eliminate any threaded joints that are further leak points and have the potential of generating debris during install.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNew and improved Gen2.1 Disaster Prevention Kit\u003c\/li\u003e\n\n\u003cli\u003eSafeguards fuel injectors, rails, lines, and tank from CP4 debris\u003c\/li\u003e\n\n\u003cli\u003eThoroughly validated and proven to work in real-world testing\u003c\/li\u003e\n\n\u003cli\u003eAll OE-style quick connects (easy install)\u003c\/li\u003e\n\n\u003cli\u003eFuel supply split-off 25 inches away from the CP4 pump\u003c\/li\u003e\n\n\u003cli\u003eReturn filter isolates CP4 debris before it goes on to the tank\u003c\/li\u003e\n\n\u003cli\u003eGen2.1 billet filter head accepts standard spin-on fuel filters\u003c\/li\u003e\n\n\u003cli\u003eComes with Donaldson P550943 fuel filter (9-micron at 99% efficiency)\u003c\/li\u003e\n\n\u003cli\u003eOne part number fits all years (2011+)\u003c\/li\u003e\n\n\u003cli\u003eImproves CP4 output past 3,000 RPM (see data below)\u003c\/li\u003e\n\n\u003cli\u003eCan extend the range of a truck during a CP4 failure\u003c\/li\u003e\n\n\u003cli\u003eCARB Compliant (EO# D-756-6)\u003c\/li\u003e\n\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFASS Fuel System\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Titanium Signature Series diesel fuel System was engineered by FASS Diesel Fuel Systems to be the top-performing, longest-lasting and most reliable aftermarket filtration System in the diesel industry. Rated at 220 gallons per hour, at 65 PSI, and backed by our limited lifetime warranty the Titanium Signature Series fuel System can support your Ford Powerstroke Diesel engine with enough fuel for 600-900 HP. A Titanium Signature Series fuel System also offers advanced filtration benefits that will help protect your Powerstroke’s injection Systems, effectively extending the life of your Diesel Injectors. These Benefits include FASS Diesel Fuel Systems patented air\/vapor removal process. Powerstroke diesel engines are known for having injector failure issues; this can be caused by several different factors and FASS Filtration Systems is designed to eliminate those that are fuel related.\u003c\/p\u003e\n\n\u003cp\u003eThe Titanium Signature Series diesel fuel Systems are the superior fuel System and filtration System, in the diesel industry. This is because here at FASS Diesel Fuel Systems we focus on perfecting our Systems and how they are engineered, taking the extra steps that our competitors ignore while they rush to get product out the door. By doing this we have less than a 2% failure rating with our motor and a design that implements unique design features you can only get with FASS Diesel Fuel Systems.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNew Whisper Technology\u003c\/li\u003e\n\n\u003cli\u003eNew Bolt On Bracket Installation\u003c\/li\u003e\n\n\u003cli\u003ePreset 65 PSI Fuel Pressure\u003c\/li\u003e\n\n\u003cli\u003eComplete Replacement System\u003c\/li\u003e\n\n\u003cli\u003e220 Gallons Per Hour Flow Rating\u003c\/li\u003e\n\n\u003cli\u003eRemoves Water, Air and Debris From Diesel Fuel\u003c\/li\u003e\n\n\u003cli\u003e2 Microns Absolute Filtration Rating\u003c\/li\u003e\n\n\u003cli\u003eProtects and Extends The Life Of Your Injectors\u003c\/li\u003e\n\n\u003cli\u003eImproved Cold Weather Starts\u003c\/li\u003e\n\n\u003cli\u003eDecreases Carbon Monoxide and Carbon Dioxide Emissions\u003c\/li\u003e\n\n\u003cli\u003e½ Inch Fuel Lines and Ports\u003c\/li\u003e\n\n\u003cli\u003eFuel Mileage Improvement\u003c\/li\u003e\n\n\u003cli\u003eImproved Fuel Volume Delivery\u003c\/li\u003e\n\n\u003cli\u003eSmoother Engine Idle\u003c\/li\u003e\n\n\u003cli\u003eOptional Electric Heater Ports\u003c\/li\u003e\n\n\u003cli\u003eOptional Fuel Pressure Gauge Port\u003c\/li\u003e\n\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\n\u003cli\u003e1,000,000 Mile Motor\u003c\/li\u003e\n\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\n\u003cli\u003eQuietest Motor On The Market\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2017-2022 Ford F-250\/F-350 6.7L Powerstroke\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eS\u0026amp;S CP4 Disaster Prevention Kit\u003c\/li\u003e\n\n\u003cli\u003eFASS Titanium Signature Series Diesel Fuel System 250F 220GPH (65 PSI)\u003c\/li\u003e\n\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082746716317,"sku":"TSF18250F220G | CP4-6.7F-BP-G2.1","price":1299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198827343.png?v=1784816750"},{"product_id":"fass-240gph-pump-ss-disaster-prevention-kit-for-17-21-ford-6-7l-powerstroke-tsf18240g-cp4-6-7f-bp-g2-1","title":"FASS 240GPH Pump \u0026 S\u0026S Disaster Prevention Kit For 17-21 Ford 6.7L Powerstroke","description":"\u003cp\u003e\u003cstrong\u003eS\u0026amp;S CP4 Disaster Prevention Kit\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eS\u0026amp;S Diesel Motorsport, the creator of the original Disaster Prevention Kit for the 6.7 Power Stroke, is at it again with a much-improved second generation kit. Since its debut in 2016, the original S\u0026amp;S 6.7L Power Stroke CP4 Bypass Kit (Disaster Prevention Kit) has safeguarded thousands of injectors from CP4 debris. In fact, it works so well that it has been copied by multiple opportunists within the aftermarket. Being a company founded by fuel system engineers, S\u0026amp;S Diesel Motorsport has the ability, and responsibility, to offer the best solutions to fuel system problems. While the original bypass kit offers really good protection from a CP4 failure, the last four years have given the S\u0026amp;S engineers plenty of time to discover and eliminate potential problems.\u003c\/p\u003e\n\n\u003cp\u003eThe S\u0026amp;S Diesel Motorsport Gen2.1 6.7L Power Stroke CP4 Disaster Prevention Kit features all quick connect lines that will eliminate the need for cutting the factory supply line, which is a debris introduction point, especially if the cut is not thoroughly deburred. It also eliminates the need to use a compression fitting, which is a potential leak point. The OE-style quick connect lines also eliminate any threaded joints that are further leak points and have the potential of generating debris during install.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNew and improved Gen2.1 Disaster Prevention Kit\u003c\/li\u003e\n\n\u003cli\u003eSafeguards fuel injectors, rails, lines, and tank from CP4 debris\u003c\/li\u003e\n\n\u003cli\u003eThoroughly validated and proven to work in real-world testing\u003c\/li\u003e\n\n\u003cli\u003eAll OE-style quick connects (easy install)\u003c\/li\u003e\n\n\u003cli\u003eFuel supply split-off 25 inches away from the CP4 pump\u003c\/li\u003e\n\n\u003cli\u003eReturn filter isolates CP4 debris before it goes on to the tank\u003c\/li\u003e\n\n\u003cli\u003eGen2.1 billet filter head accepts standard spin-on fuel filters\u003c\/li\u003e\n\n\u003cli\u003eComes with Donaldson P550943 fuel filter (9-micron at 99% efficiency)\u003c\/li\u003e\n\n\u003cli\u003eOne part number fits all years (2011+)\u003c\/li\u003e\n\n\u003cli\u003eImproves CP4 output past 3,000 RPM (see data below)\u003c\/li\u003e\n\n\u003cli\u003eCan extend the range of a truck during a CP4 failure\u003c\/li\u003e\n\n\u003cli\u003eCARB Compliant (EO# D-756-6)\u003c\/li\u003e\n\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFASS Fuel System\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Titanium Signature Series diesel fuel System was engineered by FASS Diesel Fuel Systems to be the top-performing, longest-lasting, and most reliable aftermarket filtration System in the diesel industry. Rated at 240 gallons per hour, at 65 PSI, and backed by our limited lifetime warranty the Titanium Signature Series fuel System can support your Ford Powerstroke Diesel engine with enough fuel for 900-1200 HP. A Titanium Signature Series fuel System also offers advanced filtration benefits that will help protect your Powerstroke’s injection Systems, effectively extending the life of your Diesel Injectors. These Benefits include FASS Diesel Fuel Systems patented air\/vapor removal process. Powerstroke diesel engines are known for having injector failure issues; this can be caused by several different factors and FASS Filtration Systems is designed to eliminate those that are fuel related.\u003c\/p\u003e\n\n\u003cp\u003eThe Titanium Signature Series diesel fuel Systems are the superior fuel System and filtration System, in the diesel industry. This is because here at FASS Diesel Fuel Systems we focus on perfecting our Systems and how they are engineered, taking the extra steps that our competitors ignore while they rush to get product out the door. By doing this we have less than a 2% failure rating with our motor and a design that implements unique design features you can only get with FASS Diesel Fuel Systems.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNew Whisper Technology\u003c\/li\u003e\n\n\u003cli\u003eNew Bolt On Bracket Installation\u003c\/li\u003e\n\n\u003cli\u003ePreset 65 PSI Fuel Pressure\u003c\/li\u003e\n\n\u003cli\u003eComplete Replacement System\u003c\/li\u003e\n\n\u003cli\u003e240 Gallons Per Hour Flow Rating\u003c\/li\u003e\n\n\u003cli\u003eRemoves Water, Air and Debris From Diesel Fuel\u003c\/li\u003e\n\n\u003cli\u003e2 Microns Absolute Filtration Rating\u003c\/li\u003e\n\n\u003cli\u003eProtects and Extends The Life Of Your Injectors\u003c\/li\u003e\n\n\u003cli\u003eImproved Cold Weather Starts\u003c\/li\u003e\n\n\u003cli\u003eDecreases Carbon Monoxide and Carbon Dioxide Emissions\u003c\/li\u003e\n\n\u003cli\u003e½ Inch Fuel Lines and Ports\u003c\/li\u003e\n\n\u003cli\u003eFuel Mileage Improvement\u003c\/li\u003e\n\n\u003cli\u003eImproved Fuel Volume Delivery\u003c\/li\u003e\n\n\u003cli\u003eSmoother Engine Idle\u003c\/li\u003e\n\n\u003cli\u003eOptional Electric Heater Ports\u003c\/li\u003e\n\n\u003cli\u003eOptional Fuel Pressure Gauge Port\u003c\/li\u003e\n\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\n\u003cli\u003e1,000,000 Mile Motor\u003c\/li\u003e\n\n\u003cli\u003e30,000 Mile Filter Life Expectancy\u003c\/li\u003e\n\n\u003cli\u003eQuietest Motor On The Market\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2017-2021 Ford F-250\/F-350 6.7L Powerstroke\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eS\u0026amp;S CP4 Disaster Prevention Kit\u003c\/li\u003e\n\n\u003cli\u003eFASS Titanium Signature Series Diesel Fuel System 290F 240GPH (65 PSI)\u003c\/li\u003e\n\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"S\u0026S Diesel","offers":[{"title":"Default Title","offer_id":45082746880157,"sku":"TSF18290F240G | CP4-6.7F-BP-G2.1","price":1349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198827352.png?v=1784831752"},{"product_id":"h-s-lower-fuel-filter-bypass-kit-for-2017-2024-ford-6-7l-powerstroke-diesel","title":"H\u0026S Lower Fuel Filter Bypass Kit For 2017-2025 Ford 6.7L Powerstroke Diesel","description":"\u003cdiv class=\"s-item__title\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eUpgrade your Ford Power Stroke with the H\u0026amp;S Motorsports Lower Fuel Filter Bypass Kit. This kit is specifically designed for vehicles equipped with aftermarket fuel filter systems like FASS or AirDog. Avoid the messy and time- consuming process of changing the OE lower fuel filter and enjoy a cleaner, more efficient filtration setup by eliminating the stock lower fuel filter system. This upgrade not only saves you time and effort but also helps your engine receive the best possible fuel filtration, enhancing reliability and longevity. This kit includes everything that you need for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eComplete Bypass Solution\u003c\/strong\u003e\u003cbr\u003eEliminates the need for the stock lower fuel filter system.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eStraight Forward Installation\u003c\/strong\u003e\u003cbr\u003eIncludes the HS Motorsports Patent Pending Billet Filter Plate, along with hose fittings, hoses, and all necessary hardware.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eMess-Free Maintenance\u003c\/strong\u003e\u003cbr\u003ePrevents fuel spills and messes typically associated with changing the factory lower fuel filter.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eHigh-Quality Components\u003c\/strong\u003e\u003cbr\u003eMade from durable materials to ensure long-lasting performance and reliability.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eOptimized for Aftermarket Systems\u003c\/strong\u003e\u003cbr\u003eComplements FASS and AirDog systems perfectly for superior fuel filtration.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"s-item__title\"\u003e\n\u003cul\u003e\n\u003cli\u003eHS Motorsports Patent Pending Billet Filter Plate\u003c\/li\u003e\n\u003cli\u003eHoses \u0026amp; Hose Fittings\u003c\/li\u003e\n\u003cli\u003eIncludes Installation Hardware\u003c\/li\u003e\n\u003cli\u003eEffortless Maintenance (Eliminates Unnecessary Filters)\u003c\/li\u003e\n\u003cli\u003eLong-Term Savings\u003c\/li\u003e\n\u003cli\u003eClean and Efficient\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Lower Fuel Filter Bypass Kit\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2017-2025 Ford 6.7L Powerstroke\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Year Limited Warranty\u003c\/li\u003e\n\u003cli\u003eShipping Restrictions Apply This product can not be shipped to these states\/provinces: CA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"H\u0026S Motorsports","offers":[{"title":"Default Title","offer_id":45645536788637,"sku":"121016","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/Screenshot2024-07-01115446.png?v=1719856339"},{"product_id":"h-s-motorsports-upper-fuel-filter-bypass-kit-for-2017-2024-ford-6-7l-powerstroke","title":"H\u0026S Motorsports Upper Fuel Filter Bypass Kit For 2017-2025 Ford 6.7L Powerstroke","description":"\u003cdiv class=\"s-item__title\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe H\u0026amp;S Motorsports 121015 Ford 6.7L Power Stroke Upper Fuel Filter Bypass Kit is an ideal upgrade for your aftermarket fuel system equipped vehicle. This kit allows you to bypass and eliminate the stock fuel filter system entirely. Enjoy the full benefits of your aftermarket system without the hassle of changing factory fuel filters and enjoy a cleaner, more efficient filtration setup. This upgrade not only saves you time and effort but also helps your engine receive the best possible fuel filtration, enhancing reliability and longevity. This kit includes everything that you need for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eComplete Bypass Solution\u003c\/strong\u003e\u003cbr\u003eEliminates the need for the stock upper fuel filter system.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eStraight Forward Installation\u003c\/strong\u003e\u003cbr\u003eIncludes the HS Motorsports\u003cspan\u003e \u003c\/span\u003eBillet Distribution Block, along with hose fittings, hoses, and all necessary hardware.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eTime-Saver\u003c\/strong\u003e\u003cbr\u003eReduces maintenance time by relying solely on your aftermarket fuel filter system.\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eHigh-Quality Components\u003c\/strong\u003e\u003cbr\u003eMade from durable materials to ensure long-lasting performance and reliability.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eOptimized for Aftermarket Systems\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eComplements FASS and AirDog systems perfectly for superior fuel filtration provided by your aftermarket fuel system.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"s-item__title\"\u003e\n\u003cul\u003e\n\u003cli\u003eHS Motorsports\u003cspan\u003e \u003c\/span\u003eBillet Distribution Block\u003c\/li\u003e\n\u003cli\u003eHoses \u0026amp; Hose Fittings\u003c\/li\u003e\n\u003cli\u003eIncludes Installation Hardware\u003c\/li\u003e\n\u003cli\u003eEffortless Maintenance (Eliminates Unnecessary Filters)\u003c\/li\u003e\n\u003cli\u003eLong-Term Savings\u003c\/li\u003e\n\u003cli\u003eClean and Efficient\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"s-item__title\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Lower Upper\u003cspan\u003e \u003c\/span\u003eFilter Bypass Kit\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2017-2025 Ford 6.7L Powerstroke\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Year Limited Warranty\u003c\/li\u003e\n\u003cli\u003eShipping Restrictions Apply This product can not be shipped to these states\/provinces: CA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"H\u0026S Motorsports","offers":[{"title":"Default Title","offer_id":45645589872797,"sku":"121015","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/Screenshot2024-07-01140828.png?v=1719860092"},{"product_id":"h-s-motorsports-upper-fuel-filter-bypass-kit-for-2011-2016-ford-6-7l-powerstroke","title":"H\u0026S Motorsports Upper Fuel Filter Bypass Kit For 2011-2016 Ford 6.7L Powerstroke","description":"\u003cdiv class=\"s-item__title\"\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe H\u0026amp;S Motorsports 121014 Ford 6.7L Power Stroke Upper Fuel Filter Bypass Kit is an ideal upgrade for your aftermarket fuel system equipped vehicle. This kit allows you to bypass and eliminate the stock fuel filter system entirely. Enjoy the full benefits of your aftermarket system without the hassle of changing factory fuel filters and enjoy a cleaner, more efficient filtration setup. This upgrade not only saves you time and effort but also helps your engine receive the best possible fuel filtration, enhancing reliability and longevity. This kit includes everything that you need for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eComplete Bypass Solution\u003c\/strong\u003e\u003cbr\u003eEliminates the need for the stock upper fuel filter system.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eStraight Forward Installation\u003c\/strong\u003e\u003cbr\u003eIncludes the HS Motorsports Billet Distribution Block, along with hose fittings, hoses, and all necessary hardware.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eTime-Saver\u003c\/strong\u003e\u003cbr\u003eReduces maintenance time by relying solely on your aftermarket fuel filter system.\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eHigh-Quality Components\u003c\/strong\u003e\u003cbr\u003eMade from durable materials to ensure long-lasting performance and reliability.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003eOptimized for Aftermarket Systems\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eComplements FASS and AirDog systems perfectly for superior fuel filtration provided by your aftermarket fuel system.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"s-item__title\"\u003e\n\u003cul\u003e\n\u003cli\u003eHS Motorsports Billet Distribution Block\u003c\/li\u003e\n\u003cli\u003eHoses \u0026amp; Hose Fittings\u003c\/li\u003e\n\u003cli\u003eIncludes Installation Hardware\u003c\/li\u003e\n\u003cli\u003eEffortless Maintenance (Eliminates Unnecessary Filters)\u003c\/li\u003e\n\u003cli\u003eLong-Term Savings\u003c\/li\u003e\n\u003cli\u003eClean and Efficient\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"s-item__title\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Lower Upper Filter Bypass Kit\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2011-2016 Ford 6.7L Powerstroke\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Year Limited Warranty\u003c\/li\u003e\n\u003cli\u003eShipping Restrictions Apply This product can not be shipped to these states\/provinces: CA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!----\u003e","brand":"H\u0026S Motorsports","offers":[{"title":"Default Title","offer_id":45645642006685,"sku":"121014","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/Screenshot2024-07-01140821.png?v=1719861982"},{"product_id":"ford-oem-fuel-filter-kit-for-2017-2023-6-7l-powerstroke-diesel","title":"Ford OEM Fuel Filter Kit for 2017-2024 6.7L Powerstroke Diesel","description":"\u003cp\u003eThe Ford OEM Fuel Filter Kit for 2017-2023 6.7L Powerstroke engines is designed to maintain the performance and longevity of your vehicle's fuel system. It includes all necessary components for a complete filter replacement, ensuring proper filtration and protection against contaminants. This kit is engineered to meet Ford's high standards and is a direct fit for the specified models, making installation straightforward. It's ideal for those who want to maintain the reliability and efficiency of their Powerstroke engine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2017-2024 Ford 6.7L Powerstroke Engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eReplaces:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFD-4647, FD-4624, FD-4625-AA, FD-4641, PC3Z-9N184-C, HC3Z-9N184-B, HC3Z-9N184-C, HC3Z-9N184-J, LC3Z-9N184-A\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Motorcraft","offers":[{"title":"Default Title","offer_id":45852466806941,"sku":"FD4647","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/fd.png?v=1784750728"},{"product_id":"bd-diesel-fuel-injector-line-set-for-11-21-ford-f-250-f-350-6-7l-power-stroke","title":"BD Diesel Fuel Injector Line Set For 11-21 Ford F-250\/F-350 6.7L Power Stroke","description":"\u003cp\u003eThe BD-Power 1050165 Fuel Injector Line Set will replace the corroded, contaminated, or leaking lines in your 2011-2021 Ford 6.7L Powerstroke. The drop-in fuel lines are precisely pre-formed to the correct shame and are corrosion-resistant to provide a long service life. Sold as a complete set of 8 injectors lines.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Quality\u003c\/li\u003e\n\u003cli\u003eCorrosion Resistant\u003c\/li\u003e\n\u003cli\u003eDirect-Fit Replacement\u003c\/li\u003e\n\u003cli\u003e8 Injector Lines Included\u003c\/li\u003e\n\u003cli\u003eNo Need For Adjusting Or Bending Fuel Lines\u003c\/li\u003e\n\u003cli\u003ePreformed To The Correct Factory Specifications\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) BD Diesel Injector Line Kit (8 Lines) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2011-2021 Ford F-250 6.7L Powerstroke\u003c\/li\u003e\n\u003cli\u003e2011-2021 Ford F-350 6.7L Powerstroke\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BD-Power","offers":[{"title":"Default Title","offer_id":46087539392669,"sku":"1050165","price":320.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/Screenshot2024-10-22141821.png?v=1729623058"},{"product_id":"lift-pump-pigtail-for-2017-2024-ford-f-250-f-350-6-7l-powerstroke","title":"Fleece Lift Pump Pigtail For 2017-2024 Ford F-250\/F-350 6.7L Powerstroke","description":"\u003cp\u003eReplacement fuel pump pigtail for the 2017-2024 6.7L Powerstroke. Includes heat-sealable butt-style connectors. Produced in-house, our manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck back on the road quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDurable heat-sealable butt-style connectors included\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh-quality, in-house manufactured replacement part\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAutomated wire cutting ensures consistent quality\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eQuick-install pigtail for efficient Powerstroke repair\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrecision crimped terminals for secure connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2017-2024 Ford F-250 6.7L \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2017-2024 Ford F-350 6.7L \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Lift Pump Pigtail\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 Month Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fleece","offers":[{"title":"Default Title","offer_id":46105872957597,"sku":"FPE-HAR-FMC-LP-1724","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/Screenshot2024-10-29085515.png?v=1730206839"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/collections\/1_e8ca6545-4ff9-43eb-b667-2f7cc3e335f7.webp?v=1790362270","url":"https:\/\/rudysdiesel.com\/collections\/6-7l-powerstroke-fuel-system-components.oembed","provider":"Rudy's Performance Parts","version":"1.0","type":"link"}