{"title":"7.3L Powerstroke Fuel System Components","description":null,"products":[{"product_id":"aeromotive-130gph-fuel-pump-pump-only-11802","title":"Aeromotive 130GPH Fuel Pump (Pump Only)","description":"\u003cp\u003eThe Aeromotive 11802 Fuel Pump offers a true solution to Duramax, Cummins and Powerstroke owners looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel Pump addresses the common failure points and issues that have plagued the market for years.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFiltration:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1\"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eShaft Seals \u0026amp; Pump Design:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eLike all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eExtreme Climates:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eAeromotive understands that some need their trucks in harsh environments. For the extreme cold, the Aeromotive 11802 features (2) 8-AN ports to allow engine coolant to warm the pump body. In addition, the pump is a completely sealed unit allowing it to get wet or be submerged without skipping a beat.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFuel Pressure:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. The 11802 also comes standard with a pump mounted gauge so you can refine your pressure tuning without having to guess.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e||||\u003cul\u003e\n\u003cli\u003e130 GPH @ 10 PSI\u003c\/li\u003e\n\u003cli\u003ePump Only (No Installation Kit)\u003c\/li\u003e\n\u003cli\u003eIdeal For Custom Applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e Quick-Connect fittings shown installed in pump are for display only. Pump fittings and installation kit are not included. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073138581661,"sku":"11802","price":1414.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662903.jpg?v=1713403400"},{"product_id":"aeromotive-230gph-fuel-pump-pump-only-11806","title":"Aeromotive 230GPH Fuel Pump (Pump Only)","description":"\u003cp\u003eThe Aeromotive 11806 Fuel Pump offers a true solution to Duramax, Cummins and Powerstroke owners looking to upgrade the fuel system on their truck. Built to be more reliable, more efficient, and more advanced than other products on the market, the Aeromotive Fuel Pump addresses the common failure points and issues that have plagued the market for years.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFiltration:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Aeromotive Fuel System separates air and debris to provide your engine with the cleanest fuel. This kit comes standard with one of the best filters on the market, the CATERPILLAR 1R-750. Because the pump was designed with a standard 1\"-14 thread, it can fit a wide range of aftermarket filters so cross-referencing or changing filters is never an issue.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eShaft Seals \u0026amp; Pump Design:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eLike all Aeromotive In-Line Pumps, the Aeromotive Diesel Fuel System features a flow-through design. This means that fuel actually flows across the motor, because of this, there's no shaft seal to fail which increases reliability and durability of the pump.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFuel Pressure:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike other diesel lift pumps, Aeromotive chose to use a spring and diaphragm design for precise pressure control. The design provides more control over exact system pressures. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRace Pump \u003c\/li\u003e\n\u003cli\u003e230 GPH @ 10 PSI \u003c\/li\u003e\n\u003cli\u003ePump Only (No Installation Kit)\u003c\/li\u003e\n\u003cli\u003eIdeal For Custom Applications \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e Quick-Connect fittings shown installed in pump are for display only. Pump fittings and installation kit are not included. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073139171485,"sku":"11806","price":1760.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662912.jpg?v=1713403413"},{"product_id":"aeromotive-5-8-pickup-1-2-return-kit","title":"Aeromotive 5\/8\" Pickup \u0026 1\/2\" Return Kit","description":"\u003cp\u003e\n\u003c\/p\u003e\u003cp\u003eThe Aeromotive 11805 5\/8\" Pickup \u0026amp; 1\/2\" Return Kit provides you with the necessary plumbing components for installing the Aeromotive 11802 Fuel Pump on your truck. \u003c\/p\u003e","brand":"Aeromotive","offers":[{"title":"Default Title","offer_id":45073139237021,"sku":"11805","price":490.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662911.jpg?v=1713403415"},{"product_id":"airdog-raptor-4g-150-gph-high-pressure-fuel-lift-pump-for-99-03-7-3l-powerstroke-r4spbf357","title":"AirDog Raptor 4G 150 GPH High Pressure Fuel Lift Pump For 99-03 7.3L Powerstroke","description":"\u003cp\u003e\u003cstrong\u003eAirDog Raptor 4G 150 GPH High Pressure Fuel Lift Pump For 1999-2003 Ford 7.3L Powerstroke\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003eThis is the Raptor-4G RP-150 fuel system for the 1999-2003 Ford 7.3L Powerstroke. This system replaces the factory frame rail mounted fuel pump. This system mounts to the frame rail using the supplied sandwich plate mounting system. The suction line connects to the factory suction fitting on the frame rail. The pressure side connects directly into the factory feed line to the factory fuel filter and injection pump. These pumps are internally regulated and do not require a return line. This is a 150GPH (Gallon Per Hour) fuel system for moderately modified trucks.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAirDog Raptor 4G 150HP Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePreset @ 55 PSI\u003c\/li\u003e\n\n\u003cli\u003eFlows 150 Gallons Per Hour\u003c\/li\u003e\n\n\u003cli\u003eNo Return Line Needed\u003c\/li\u003e\n\n\u003cli\u003e4G Technology\u003c\/li\u003e\n\n\u003cli\u003eSmoother Idle \u0026amp; Acceleration\u003c\/li\u003e\n\n\u003cli\u003eGerotor Pump Design\u003c\/li\u003e\n\n\u003cli\u003eImproved Throttle Response\u003c\/li\u003e\n\n\u003cli\u003eCARB E.O. Number D-595-3\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eReplaces Obsolete Part Numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eR4SBF216\u003c\/li\u003e\n\n\u003cli\u003eR4SBF219\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Pictures of the Fuel System may vary. Please refer to the listing title and product description for correct Fuel System.\u003c\/p\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073151131805,"sku":"R4SPBF357","price":506.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198709968.png?v=1713403640"},{"product_id":"airdog-fuel-filter-2-micron-replacement-water-separator","title":"AirDog Fuel Filter (2 Micron) \u0026 Replacement Water Separator","description":"\u003cp\u003e\n\n\u003c\/p\u003e\u003cp\u003e\u003cb\u003e\u003cbr\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits All AirDog \u0026amp; AirDog II Kits \u003c\/li\u003e\n\u003cli\u003eGenuine AirDog Replacement \u003c\/li\u003e\n\u003cli\u003e2 Micron Filtration Rating\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cbr\u003eThe AirDog Replacement Water Separator WS100 is a direct replacement for your AirDog Fuel System. The built-in drain allows you to empty any water from the filter during routine maintenance. The life expectancy for the Airdog Water Separator could be up to 25K miles or a year. However, those figures can change drastically depending on fuel quality. Order a few extra and keep them in your cab or toolbox. \u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits All AirDog \u0026amp; AirDog II Kits \u003c\/li\u003e\n\u003cli\u003eGenuine AirDog Replacement \u003c\/li\u003e\n\u003cli\u003eReplaces Part# WS80\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAirDog FF100-2 \u0026amp; WS100\u003c\/p\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073151819933,"sku":"FF100-2-WS100","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198666722.jpg?v=1713403655"},{"product_id":"airdog-replacement-10-micron-fuel-filter","title":"AirDog Replacement 10 Micron Fuel Filter","description":"\u003cp\u003e\u003cstrong\u003eAirDog Replacement 10 Micron Fuel Filter\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThis is the 10 micron fuel filter that is a direct fit for all AirDog I, AirDog II, and AirDog II-4G models.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCross Reference Numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNAPA: 3420\u003c\/li\u003e\n\n\u003cli\u003eWIX: 33420\u003c\/li\u003e\n\n\u003cli\u003eBaldwin: BF-7531\u003c\/li\u003e\n\n\u003cli\u003eFleetguard: 5613\u003c\/li\u003e\n\n\u003cli\u003eDonaldson: P551315\u003c\/li\u003e\n\n\u003cli\u003eLuberFiner: LFF3545\u003c\/li\u003e\n\n\u003cli\u003eNote, this is for fitment and not micron rating.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073152606365,"sku":"FF100-10","price":32.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198717858.jpg?v=1713403667"},{"product_id":"airdog-replacement-water-separator","title":"AirDog Replacement Water Separator","description":"\u003cp\u003e\u003cstrong\u003eAirDog Replacement Water Separator\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThis is the water separator  that is a direct fit for all AirDog I, AirDog II, and AirDog II-4G models.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCross Reference Numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eNAPA: 3616\u003c\/li\u003e\n\n\u003cli\u003eWIX: 33616\u003c\/li\u003e\n\n\u003cli\u003eBaldwin: BF-1275\u003c\/li\u003e\n\n\u003cli\u003eFleetguard: FS19768\u003c\/li\u003e\n\n\u003cli\u003eDonaldson: P550550\u003c\/li\u003e\n\n\u003cli\u003eLuberFiner: LFF9594\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45073152802973,"sku":"WS100","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198717856.jpg?v=1713403673"},{"product_id":"bean-machine-multi-function-fuel-tank-sump-280002","title":"Bean Machine Multi Function Fuel Tank Sump","description":"\u003cp\u003e\u003cstrong\u003eNew and Improved Multi-Function Fuel Sump Design\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe Beans Diesel Bean Machine Multi-Function Fuel Sump takes the proven single-hole sump design to the next level. Constructed from billet 6061 aluminum, this heavy-duty sump provides improved fuel delivery, simple installation, and versatile plumbing options for a wide range of aftermarket fuel systems.\u003c\/p\u003e\n\n\u003cp\u003eInstallation requires only a single 3\" hole and one mounting bolt, eliminating the need to remove the fuel tank while minimizing potential leak points.\u003c\/p\u003e\n\n\u003ch3\u003eMultiple Configuration Options\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eSupply and return configuration\u003c\/li\u003e\n\u003cli\u003eSingle outlet operation\u003c\/li\u003e\n\u003cli\u003eDual outlet setup for high-horsepower applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eEliminates common quarter-tank fuel starvation issues\u003c\/li\u003e\n\u003cli\u003eProvides access to nearly all available fuel in the tank\u003c\/li\u003e\n\u003cli\u003eReduces fuel pump strain and operating noise\u003c\/li\u003e\n\u003cli\u003eNo tank removal required during installation\u003c\/li\u003e\n\u003cli\u003eImproves fuel flow for high-output lift pump systems\u003c\/li\u003e\n\u003cli\u003eCompatible with many aftermarket fuel systems, including FASS and AirDog\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eBillet 6061 aluminum construction\u003c\/li\u003e\n\u003cli\u003eOriginal single-hole sump design\u003c\/li\u003e\n\u003cli\u003eSingle-bolt installation for reduced leak potential\u003c\/li\u003e\n\u003cli\u003eRequires only one 3\" hole in the fuel tank\u003c\/li\u003e\n\u003cli\u003eIntegrated sediment bowl helps reduce debris pickup\u003c\/li\u003e\n\u003cli\u003eExclusive O-ring sealing design for leak-free operation\u003c\/li\u003e\n\u003cli\u003eUses ORB fittings instead of pipe-thread fittings\u003c\/li\u003e\n\u003cli\u003eHigh-flow quick-disconnect and push-lock compatible fittings\u003c\/li\u003e\n\u003cli\u003eStainless steel drain plug for future servicing\u003c\/li\u003e\n\u003cli\u003eInner ring design eliminates the need to drop the tank\u003c\/li\u003e\n\u003cli\u003eCompatible with metal and plastic fuel tanks\u003c\/li\u003e\n\u003cli\u003eWorks with gasoline and diesel applications\u003c\/li\u003e\n\u003cli\u003eRequires a minimum 4\" flat mounting area\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in Woodbury, Tennessee, USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Advantages\u003c\/h3\u003e\n\n\u003cp\u003eUnlike traditional draw-straw systems, the Bean Machine Fuel Sump draws fuel directly from the bottom of the tank. This helps reduce restrictions, lower fuel pump noise, and prevent low-fuel starvation issues commonly experienced with top-mounted pickup systems.\u003c\/p\u003e\n\n\u003cp\u003eThe single-hole design also eliminates the need to lower the fuel tank, reducing installation time and simplifying aftermarket fuel system upgrades.\u003c\/p\u003e\n\n\u003ch3\u003eKit Includes\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eSump body\u003c\/li\u003e\n\u003cli\u003eSump \"Pacman\" in-tank backer ring\u003c\/li\u003e\n\u003cli\u003e3\" hole saw\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting bolt\u003c\/li\u003e\n\u003cli\u003eSealing washer\u003c\/li\u003e\n\u003cli\u003eO-ring\u003c\/li\u003e\n\u003cli\u003e(2) -8 ORB to 1\/2\" QDC\/push-lock fittings with O-rings\u003c\/li\u003e\n\u003cli\u003e(1) -8 ORB plug for single-outlet operation\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT stainless steel drain plug fitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBuilt for Real-World Durability\u003c\/h3\u003e\n\n\u003cp\u003eThe Bean Machine Fuel Sump has been tested in demanding conditions including towing, off-road use, and severe-duty environments. Its billet construction and proven sealing design deliver reliable performance in both daily-driven and high-performance applications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWatch the durability torture test:\u003c\/strong\u003e\u003cbr\u003e\n\u003ca href=\"https:\/\/www.youtube.com\/watch?v=n_GaBRX6SMY\" target=\"_blank\" rel=\"noopener\"\u003eBeans Diesel Sump Torture Test Video\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWatch the bubble demonstration video:\u003c\/strong\u003e\u003cbr\u003e\n\u003ca href=\"https:\/\/www.youtube.com\/watch?v=_9GbXYBftVA\u0026amp;t=2s\" target=\"_blank\" rel=\"noopener\"\u003eMulti-Function Sump Bubble Test Video\u003c\/a\u003e\u003c\/p\u003e","brand":"Beans Diesel","offers":[{"title":"Default Title","offer_id":45073159520413,"sku":"280002","price":157.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198706723.jpg?v=1713403814"},{"product_id":"rudys-dual-o-ring-fuel-tank-sump-kit-w-holesaw-dp0028","title":"Rudy's Dual O-Ring Fuel Tank Sump Kit w\/ Holesaw","description":"\u003cp\u003eFuel Sumps are nothing new these days, you see them everywhere and every company seems to have one. What we have done is step the tank sump up a notch. Made from 6061 Billet aluminum this sump is built like a tank and is super simple to install. While still using a no-tank drop design we have made this sump to where it will install with 1 single bolt with one single 3\" hole in your tank. This means less places to leak and much quicker install.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eBuilt-In Drain Plug\u003c\/li\u003e\n\n\u003cli\u003eDual O-Ring Design\u003c\/li\u003e\n\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\n\u003cli\u003eLarge Opening for Unrestricted Fuel Flow\u003c\/li\u003e\n\n\u003cli\u003eWorks Great With Stock \u0026amp; Aftermarket Fuel Tanks\u003c\/li\u003e\n\n\u003cli\u003e1-Year Warranty\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eNot recommended for off-road applications or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling\u003c\/p\u003e","brand":"Rudy's","offers":[{"title":"Default Title","offer_id":45073511350429,"sku":"DP0028","price":47.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198666338.jpg?v=1713405089"},{"product_id":"alliant-power-mechanical-fuel-transfer-pump-for-94-98-7-3l-powerstroke-apm61067","title":"Alliant Power Mechanical Fuel Transfer Pump For 94-98 7.3L Powerstroke","description":"\u003cp\u003e\u003cstrong\u003eAlliant Power Mechanical Fuel Transfer Pump For 1994-1998 Ford 7.3L Powerstroke\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes two banjo gaskets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eOEM Part Numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"field-item even\"\u003e1824415C93\u003c\/li\u003e\n\u003cli class=\"field-item odd\"\u003e1826794C93\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alliant Power","offers":[{"title":"Default Title","offer_id":45074570870941,"sku":"APM61067","price":206.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/APM61067_1.jpg?v=1784816536"},{"product_id":"rudys-fuel-tank-sump-kit-w-integrated-return-holesaw-dp0267","title":"Rudy's Fuel Tank Sump Kit w\/ Integrated Return \u0026 Holesaw","description":"\u003csection class=\"cmp-product-section cmp-product-description open animate--fade-in\" data-scroll=\"\"\u003e\n\u003cdiv class=\"cmp-product-section__inner\"\u003e\n\u003cdiv class=\"cmp-product-description__content\"\u003e\n\u003csection class=\"cmp-product-section cmp-product-description open animate--fade-in\" data-scroll=\"\"\u003e\n\u003cdiv class=\"cmp-product-section__inner\"\u003e\n\u003cdiv class=\"cmp-product-description__content\"\u003e\n\u003cp\u003eThe Rudy's Fuel Tank Sump with Built-In Fuel Return provides you with a perfect option to maximize fuel delivery, and customization when installing your aftermarket fuel system. Avoid the common 1\/4 tank issues associated with in-tank draw straws used with fuel systems such as AirDog, FASS and many others. The Rudy's sump features a one-hole design that only requires drilling a single hole for installation. A machined groove for the o-ring gasket ensures a leak-free seal, and the inner-ring is designed to fit into the bottom of the tank without requiring you to remove it from the truck. We even include a 3\" hole saw for drilling your tank! \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWhat sets this sump apart from the other sumps in the Rudy's lineup is the built-in return. Installation of most aftermarket fuel systems require you to cut and \"tee\" into your factory fuel filler neck. In some cases, modifications to the filler neck can cause leaks, and also cause fuel pumps to \"click off\" when refueling. Using the built-in return port, you can easily route return fuel back to the tank without having to modify any other components for a clean and easy installation. For optimal fuel quality, the Rudy's Sump features a stand pipe that places the returned fuel above the fuel feed. This design eliminates the possibility of feeding your engine the aerated return fuel coming back to your fuel tank. Includes barbed fittings for 1\/2\" hose. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-In Fuel Return \u003c\/li\u003e\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\u003cli\u003eStand Pipe Separates Return Fuel \u0026amp; Feed\u003c\/li\u003e\n\u003cli\u003e3\" Hole Saw Included For Easy Installation\u003c\/li\u003e\n\u003cli\u003eMade From Aircraft Grade T6 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eWorks Great With Stock \u0026amp; Aftermarket Fuel Tanks \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Not recommended for off-road s or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eUniversal - Cutting Required\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"cmp-product-section cmp-product-specification animate--fade-in\" data-scroll=\"\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"cmp-product-section cmp-product-specification animate--fade-in\" data-scroll=\"\"\u003e\u003c\/section\u003e","brand":"Rudy's","offers":[{"title":"Default Title","offer_id":45074701582493,"sku":"DP0267","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198713402.jpg?v=1713408921"},{"product_id":"bean-machine-micro-fuel-sump-280032","title":"Bean Machine Micro Fuel Sump","description":"\u003cp\u003eThe \u003cstrong\u003eBeans Diesel Bean Machine Micro Fuel Sump\u003c\/strong\u003e delivers the same proven performance and quality as the original Beans Diesel fuel sump in a more compact, budget-friendly design. Manufactured from billet 6061 aluminum, the Micro Sump features a simple one-bolt, one-hole installation that eliminates the need to drop the fuel tank.\u003c\/p\u003e\n\n\u003cp\u003eDesigned for use with aftermarket fuel systems such as FASS and AirDog, the Micro Sump improves fuel delivery, reduces pump strain, and helps eliminate common quarter-tank fuel starvation issues associated with traditional draw straw installations.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe Micro Sump can also be used as a fuel return.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eEliminates quarter-tank fuel starvation issues\u003c\/li\u003e\n\u003cli\u003eAllows use of nearly the entire fuel tank capacity\u003c\/li\u003e\n\u003cli\u003eReduces fuel pump strain and operating noise\u003c\/li\u003e\n\u003cli\u003eNo tank removal required for installation\u003c\/li\u003e\n\u003cli\u003eCompatible with high-flow lift pump systems\u003c\/li\u003e\n\u003cli\u003eSuitable for fuel supply or fuel return applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eMade from billet 6061 aluminum\u003c\/li\u003e\n\u003cli\u003eSingle-bolt, single-hole installation design\u003c\/li\u003e\n\u003cli\u003eRequires only a 1-1\/2\" hole in the tank\u003c\/li\u003e\n\u003cli\u003eOne-piece machined billet construction\u003c\/li\u003e\n\u003cli\u003eExclusive no-leak O-ring sealing design\u003c\/li\u003e\n\u003cli\u003eStainless steel installation hardware included\u003c\/li\u003e\n\u003cli\u003eIntegrated standpipe helps reduce sediment pickup\u003c\/li\u003e\n\u003cli\u003eInner ring design eliminates the need to drop the fuel tank\u003c\/li\u003e\n\u003cli\u003eCompatible with metal or plastic fuel tanks\u003c\/li\u003e\n\u003cli\u003eRequires a minimum 3\" flat mounting area\u003c\/li\u003e\n\u003cli\u003eCompatible with gasoline or diesel applications\u003c\/li\u003e\n\u003cli\u003eInstalls in minutes\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Choose a Fuel Sump?\u003c\/h3\u003e\n\n\u003cp\u003eMany aftermarket fuel systems use draw straws that pull fuel from the top of the tank. These systems can experience fuel starvation below a quarter tank, increased pump noise, and restricted fuel flow.\u003c\/p\u003e\n\n\u003cp\u003eThe Bean Machine Micro Sump draws fuel directly from the bottom of the tank, improving fuel delivery while reducing pump strain and helping eliminate common low-fuel issues.\u003c\/p\u003e\n\n\u003ch3\u003eBuilt for Real-World Use\u003c\/h3\u003e\n\n\u003cp\u003eThe original Beans Diesel one-hole fuel sump design has been proven in daily-driven trucks, towing applications, off-road environments, and severe-duty conditions. Its billet construction and leak-resistant design provide long-term durability even in demanding environments.\u003c\/p\u003e\n\n\u003ch3\u003eKit Includes\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eMicro Sump body\u003c\/li\u003e\n\u003cli\u003eSump Pacman\u003c\/li\u003e\n\u003cli\u003eStainless steel bolt\u003c\/li\u003e\n\u003cli\u003eSealing washer\u003c\/li\u003e\n\u003cli\u003eO-ring\u003c\/li\u003e\n\u003cli\u003e8 ORB to 1\/2\" push-lock fitting with O-ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eRequires a 1-1\/2\" hole saw (not included)\u003c\/li\u003e\n\u003cli\u003eHole saw and tank drain are not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/n_GaBRX6SMY\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Beans Diesel","offers":[{"title":"Default Title","offer_id":45075058851997,"sku":"280032","price":79.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198719270.jpg?v=1713411562"},{"product_id":"bean-machine-universal-multi-function-fuel-tank-sump-kit-280003","title":"Bean Machine Universal Multi Function Fuel Tank Sump Kit","description":"\u003cp\u003e\u003cstrong\u003eBean Machine Universal Multi Function Fuel Tank Sump\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eWhat they have done at Beans Diesel\/Bean Machine is step up the tank sump another notch. Made from 6061 Billet aluminum, this guy is built like a tank and is super simple to install. Just like Beans original and revolutionary design, install is as easy as it gets, requiring a single 3\" hole and a single bolt. This means super easy and quick install time as well as minimal places to develop a leak. Bean's is not the only sump manufacturer on the market, but if you do purchase theirs you will be purchasing a 100% USA manufactured product from the company that invented the single hole design sump!\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eAll of Bean's tank sumps come with a 3\" hole saw and all the fittings you will need, (so no extra trips to the hardware store), as well as all stainless or aluminum hardware. The single O-ring design creates the perfect seal insuring you have zero leaks. Bean's manufacture the only tank sump on the market that uses O-ring Boss style fittings instead of a pipe thread style fitting. This means less possibility for leaks and a perfect seal. Their fittings can be used with a quick disconnect fitting (found on many aftermarket fuel systems) or 1\/2\" push-lock style fuel hose. That means it is going to be plug and play for the largest percentage of aftermarket fuel systems out there! They even include a plug if you only need a single outlet style sump.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUses all available fuel from the tank. No issues with sucking air when below 1\/8th of a tank. Perfect for use with today's high flow lift pump systems. (Airdog, FASS, etc)\u003c\/li\u003e\n\n\u003cli\u003eSediment bowl area machined inside of the sump to reduce the amount of sediments that get to your filter system.\u003c\/li\u003e\n\n\u003cli\u003eStainless Drain Plug for future tank servicing or sediment draining.\u003c\/li\u003e\n\n\u003cli\u003eSingle bolt design that allows for 5 minute install. A single bolt offers less chances for leaks than tanks sumps using multiple bolts drilled into the tank.\u003c\/li\u003e\n\n\u003cli\u003eStainless Steel hardware, High Flow aluminum Quick Disconnect\/pushlock fittings, and a -8 ORB Plug are provided in the kit.\u003c\/li\u003e\n\n\u003cli\u003eComes with 3” hole saw to make the only hole needed in your tank for install.\u003c\/li\u003e\n\n\u003cli\u003eInner ring designed to go through the 3” hole so tank does not need to be dropped.\u003c\/li\u003e\n\n\u003cli\u003eO-ring design for a perfect seal.\u003c\/li\u003e\n\n\u003cli\u003eSuper strong 1 piece machined billet design.\u003c\/li\u003e\n\n\u003cli\u003eCan be installed on any fuel tank with an available 4” diameter flat area\u003c\/li\u003e\n\n\u003cli\u003eSupporting the Company that Invented the Single Hole Design Sump!\u003c\/li\u003e\n\n\u003cli\u003eCan be used on metal or plastic tanks\u003c\/li\u003e\n\n\u003cli\u003eWorks on gas or diesel applications\u003c\/li\u003e\n\n\u003cli\u003eDESIGNED AND MANUFACTURED IN WOODBURY,TN USA!!!\u003cbr\u003e \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eSump Body\u003c\/li\u003e\n\n\u003cli\u003eSump \"Pacman\" in Tank Backer Ring\u003c\/li\u003e\n\n\u003cli\u003e3\" Hole Saw (Plastic Tank Only. If Installing On Metal Tank You Will Need To Purchase A Metal Hole Saw)\u003c\/li\u003e\n\n\u003cli\u003eStainless Steel Bolt\u003c\/li\u003e\n\n\u003cli\u003eSealing Washer\u003c\/li\u003e\n\n\u003cli\u003eO-Ring\u003c\/li\u003e\n\n\u003cli\u003e(2) -8 O-Ring Boss (ORB) to 1\/2\" QDC\/Push-lock Fittings\u003c\/li\u003e\n\n\u003cli\u003e(1) -8 O-Ring Boss (ORB) 1\/2\" Plug For Single Outlet Operation\u003c\/li\u003e\n\n\u003cli\u003e(1) -8 O-Ring Boss (ORB) to 5\/8\" QDC\/Push-lock Fitting\u003c\/li\u003e\n\n\u003cli\u003e(1) -8 O-Ring Boss (ORB) to 3\/8\" QDC\/Push-lock Fitting\u003c\/li\u003e\n\n\u003cli\u003e(1) 5\/16' Plug\u003c\/li\u003e\n\n\u003cli\u003e(1) 3\/8\" Plug\u003c\/li\u003e\n\n\u003cli\u003e(1) 1\/2\" Plug\u003c\/li\u003e\n\n\u003cli\u003e(3) O-Rings For the Fittings\u003c\/li\u003e\n\n\u003cli\u003e1\/4\" NPT Stainless Steel Drain Plug Fitting\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/n_GaBRX6SMY\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e \u003ciframe src=\"\/\/www.youtube.com\/embed\/_9GbXYBftVA\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Beans Diesel","offers":[{"title":"Default Title","offer_id":45075074908317,"sku":"280003","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198719614.jpg?v=1713411701"},{"product_id":"driven-diesel-regulated-return-fuel-system-kit-for-94-97-7-3l-powerstroke-dd-73fs-obs-rrk-v3","title":"Driven Diesel Regulated Return Fuel System Kit For 94-97 7.3L Powerstroke","description":"\u003cp\u003e\u003cstrong\u003eDriven Diesel Regulated Return Fuel System Kit For 1994-1997 Ford 7.3L Powerstroke OBS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThe Driven Diesel \"OBS\" Fuel Bowl Delete Regulated Return Kit is a significant upgrade for the 94-97 Powerstroke trucks. This kit eliminates the factory mechanical fuel pump and filter bowl assemblies from the engine valley, includes larger than stock fuel lines for improved fuel flow to the injectors and provides a high quality aftermarket fuel pressure regulator to properly manage fuel system pressure. For customers doing aftermarket high pressure oil pump systems, custom turbocharger systems or other high performance modifications, this kit also opens up a bunch of room in the engine valley. The use of this kit with an appropriate electric fuel pump (not included) and proper aftermarket fuel filtration will result in quicker starting and smoother engine operation. This kit will also support significantly more power upgrades, depending on the fuel pump and plumbing setup used.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e1994-1998 E-SERIES VAN OWNERS:\u003c\/strong\u003e This kit is \u003cstrong\u003eNOT\u003c\/strong\u003e a direct bolt-in for the van. Some customers have modified our kit or their van to use this product. While we don't believe that the modifications are significant, we are not aware of the specifics of the modifications and we can NOT provide support for fitting this kit to an E-Series Van. Thank You for your understanding in this matter.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Installation of this kit eliminates the stock mechanical fuel pump and engine valley filter. This kit does NOT include the required ELECTRIC FUEL PUMP or proper POST PUMP FILTER to complete the fuel system. See the RELATED PRODUCTS section below for some other components to help you complete your fuel system build.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eThe most commonly reported results from the installation of an Driven Diesel Regulated Return Kit are:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eQuicker Starting\u003c\/li\u003e\n\n\u003cli\u003eQuieter Engine Operation\u003c\/li\u003e\n\n\u003cli\u003eImproved Throttle Response\u003c\/li\u003e\n\n\u003cli\u003eIncreased Power Output\u003c\/li\u003e\n\n\u003cli\u003eIncreased Fuel Economy\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures of the Driven Diesel OBS Regulated Return Kits:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFits with Both Stock and Aftermarket Turbocharger Applications\u003c\/li\u003e\n\n\u003cli\u003eCompatible with both \"Stealth\" and \"Terminator\" Twin HPOP Setups\u003c\/li\u003e\n\n\u003cli\u003eHigh Quality FueLab Bypass Fuel Pressure Regulator **\u003c\/li\u003e\n\n\u003cli\u003e3\/8\" CNC Bent S.S. Hard Line Used in High Temperature and Tight Radius Locations *\u003c\/li\u003e\n\n\u003cli\u003eHigh Quality 3\/8\" S.S. Braided Teflon Hoses with BLACK Protective Covering *\u003c\/li\u003e\n\n\u003cli\u003eStainless Steel Regulator Mounting Bracket **\u003c\/li\u003e\n\n\u003cli\u003eMarshall Liquid Filled Fuel Pressure Gauge\u003c\/li\u003e\n\n\u003cli\u003eAll Kits Feed Front Ports (away from Turbo Heat) and Return from Rear Ports\u003c\/li\u003e\n\n\u003cli\u003eComplete Kit with All Necessary Parts and Detailed COLOR Instructions\u003c\/li\u003e\n\n\u003cli\u003eNICEST REGULATED RETURN KIT AVAILABLE...PERIOD!\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Driven Diesel","offers":[{"title":"Default Title","offer_id":45075372343453,"sku":"DD-73FS-OBS-RRK-V3","price":734.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198728082.jpg?v=1713414300"},{"product_id":"rudys-mini-fuel-tank-sump-kit-w-integrated-return-holesaw-dp0267-mini","title":"Rudy's Mini Fuel Tank Sump Kit w\/ Holesaw","description":"\u003cp\u003eThe Rudy's Mini Fuel Tank Sump provides you with a perfect option to maximize fuel delivery, and customization when installing your aftermarket fuel system. The Mini Design allows for a more versatile mounting locations.  Avoid the common 1\/4 tank issues associated with in-tank draw straws used with fuel systems such as AirDog, FASS and many others. The Rudy's mini sump features a one-hole design that only requires drilling a single hole for installation. A machined groove for the o-ring gasket ensures a leak-free seal, and the o-ring is designed to fit onto the bottom of the tank without requiring you to remove it from the truck. We even include a 2\" hole saw for drilling your tank!\u003c\/p\u003e\n\u003cp\u003eIncludes barbed fittings for 1\/2\" \u0026amp; 5\/8\" hose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-In Fuel Return\u003c\/li\u003e\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\u003cli\u003eSmall design for easier mounting\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2\" Hole Saw Included For Easy Installation\u003c\/li\u003e\n\u003cli\u003eMade From Aircraft Grade T6 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eWorks Great With Stock \u0026amp; Aftermarket Fuel Tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal - Cutting Required \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNot recommended for off-road applications or for vehicles with potential ground clearance issues. Extra care must be taken to ensure that fuel tank is free of debris after drilling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Rudy's","offers":[{"title":"Default Title","offer_id":45075475792029,"sku":"DP0267-Mini","price":89.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/267.png?v=1726686088"},{"product_id":"airdog-ii-5g-diaphragm-regulated-fuel-pump-kit-for-99-03-ford-7-3l-powerstroke-a7sabf592","title":"AirDog II 5G Diaphragm Regulated Fuel Pump Kit For 99-03 Ford 7.3L Powerstroke","description":"\u003cp\u003eAn industry first! The AirDog® II-5G is the first diesel Fuel Air Separation System to include an integrated diaphragm fuel pressure regulator. This regulator allows for more fuel pressure adjustability, offers better fuel flow at pressure, and can be boost compensated! This system has larger porting to allow less cavitation and noise at the inlet of the higher flowing 220GPH pumps. All AirDog II-5G systems come with improved wiring harnesses and connectors as well! The wiring harness is now 12ga from the battery all the way to the internal connections in the motor. A Metri-Pack 280 connector replaces the Deutch 2 pin connector which allows more more current flow without creating excessive heat. All other connectors in the harness are weather pack to keep the elements out. This system has the same 4G motor technology that has proven itself to be a reliable, quiet operating system. It also retains the \"Demand Flow\" of the older AirDog II variants. Demand Flow means whatever fuel the injection system does not consume gets recirculated back through the filter base.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eLifetime Warranty\u003c\/li\u003e\n\n\u003cli\u003eLarger Ports Over Previous Pumps\u003c\/li\u003e\n\n\u003cli\u003eDiaphragm Fuel Pressure Regulator\u003c\/li\u003e\n\n\u003cli\u003eDemand Flow Design\u003c\/li\u003e\n\n\u003cli\u003eAdjustable From 7-70 PSI\u003c\/li\u003e\n\n\u003cli\u003eIncreased Fuel Economy\u003c\/li\u003e\n\n\u003cli\u003eIncreased Horsepower \u0026amp; Torque Output\u003c\/li\u003e\n\n\u003cli\u003eIncreased Injection Pump Life\u003c\/li\u003e\n\n\u003cli\u003eLonger Injector Life\u003c\/li\u003e\n\n\u003cli\u003eImproved Throttle Response\u003c\/li\u003e\n\n\u003cli\u003eReduced Exhaust Emissions\u003c\/li\u003e\n\n\u003cli\u003eIncreased Fuel Flow Rates\u003c\/li\u003e\n\n\u003cli\u003eRemoves Air\/Vapor from Diesel Fuel\u003c\/li\u003e\n\n\u003cli\u003eComplete Installation Kit and Detailed Instructions\u003c\/li\u003e\n\n\u003cli\u003e1\/2\" Fuel Lines with OEM-Style Quick Connect Fittings\u003c\/li\u003e\n\n\u003cli\u003e4 Bearing Motor with Intermediate Shaft For Reduced Pump Noise\u003c\/li\u003e\n\n\u003cli\u003eThis Is A Complete Kit – Includes Pump \u0026amp; All Needed Mounting Hardware\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e1999-2003 Ford F-250\/F-350\/F-450\/F-550 7.3L Powerstroke \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eWe recommend installing the AirDog® on the inside of the frame rail, but we understand some applications just don’t have the room.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45075988381853,"sku":"A7SABF592","price":851.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198748695.png?v=1713418677"},{"product_id":"airdog-150-gph-lift-pump-fuel-bowl-bypass-sump-for-2001-2010-gm-6-6l-duramax-a4spbc188-dp0056-dp0028","title":"AirDog 150 GPH Lift Pump\/Fuel Bowl Bypass\/Sump For 2001-2010 GM 6.6L Duramax","description":"\u003cp\u003eThe PureFlow AirDog 150GPH Air\/Fuel Separation System for your 2001-2010 GM 6.6L Duramax provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel. The AirDog is lift pump and filter system, that enhances the fuel delivery to your engine with a commercial duty system.\u003c\/p\u003e\n\n\u003cp\u003eYour High Performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air\/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air\/vapor can cause galling and pitting of the injector barrel\/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time!\u003c\/p\u003e\n\n\u003cp\u003eThe Airdog works by pulling fuel from the fuel tank containing entrained air\/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air\/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air\/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation.\u003c\/p\u003e\n\n\u003cp\u003eThe Rudy's Duramax Fuel Filter Delete for your 2001-2016 GM 6.6L Duramax is for use after the installation of an AirDog or FASS Fuel Air Separation System. Once installed the factory fuel filter is no longer needed and can be easily removed by using this factory fuel filter canister delete. Because your Duramax fuel filter is located after the AirDog or FASS filtration system you will still need to replace the factory filter every 5,000-8,000 miles. This filter delete kit will replace your now useless fuel filter with a spin on canister that will allow fuel to flow freely into the engine, saving you even more money. This spin on fuel filter delete kit is a perfect addition to your AirDog or FASS Titanium diesel fuel pump and comes with all required hardware for a professional installation.\u003c\/p\u003e\n\n\u003cp\u003eFuel Sumps are nothing new these days, you see them everywhere and every company seems to have one. What we have done is step the tank sump up a notch. Made from 6061 Billet aluminum this sump is built like a tank and is super simple to install. While still using a no-tank drop design we have made this sump to where it will install with 1 single bolt with one single 3\" hole in your tank. This means less places to leak and much quicker install.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eSmall \u0026amp; Compact\u003c\/li\u003e\n\n\u003cli\u003eDual Feed Gerotor Pump\u003c\/li\u003e\n\n\u003cli\u003eLow Amperage Motor for Efficiency and Endurance\u003c\/li\u003e\n\n\u003cli\u003eSelf-aligning Motor for Less Maintenance \u0026amp; Less Noise\u003c\/li\u003e\n\n\u003cli\u003eIntermediate Pump Shaft to Separate the Motor from Fuel\u003c\/li\u003e\n\n\u003cli\u003eQuick Connect Components\u003c\/li\u003e\n\n\u003cli\u003eFlow Rate of 150 GPH\u003c\/li\u003e\n\n\u003cli\u003eMounts to Frame\u003c\/li\u003e\n\n\u003cli\u003eRetains WIF (Water In Fuel) Sensor\u003c\/li\u003e\n\n\u003cli\u003eInstalls In Place Of Stock Filter\u003c\/li\u003e\n\n\u003cli\u003eAllows For Unrestricted Fuel Flow To Engine\u003c\/li\u003e\n\n\u003cli\u003eBuilt-In Drain Plug\u003c\/li\u003e\n\n\u003cli\u003eDual O-Ring Design\u003c\/li\u003e\n\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2001-2010 Chevrolet Silverado 2500HD\/3500HD 6.6L Duramax LB7\/LLY\/LBZ\/LMM\u003c\/li\u003e\n\n\u003cli\u003e2001-2010 GMC Sierra 2500HD\/3500HD 6.6L Duramax LB7\/LLY\/LBZ\/LMM\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAirdog comes with Limited Lifetime Warranty, when registered properly\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":45076116504733,"sku":"A4SPBC188 | DP0056 | DP0028","price":868.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198753509.jpg?v=1713420038"},{"product_id":"driven-diesel-complete-electric-fuel-system-for-1994-1997-ford-7-3l-powerstroke-dd-73fs-obsfs-1p-v2","title":"Driven Diesel Complete Electric Fuel System For 1994-1997 Ford 7.3L Powerstroke","description":"\u003cdiv class=\"full_description\"\u003eThis Driven Diesel OBS Electric Fuel System Conversion kit for the 94-97 \"OBS\" 7.3L Powerstroke trucks is truly a COMPLETE fuel system solution. This package includes our proven OBS Regulated Return Kit along with the necessary electric fuel pump, fuel filters, hose, fittings and all necessary hardware...for a total \"tank to engine\" electric fuel system package. Fuel delivery is handled by the nearly bulletproof OEM Bosch fuel pump from the 99-03 Super Duty trucks, providing you with stellar reliability and enough fuel to supply up to about a 180cc injector (350-375hp). The result is a much more consistent fuel flow\/pressure delivered to the injectors, a primed fuel system BEFORE starting the engine, support for moderately upgraded power levels as well as filters that are easier to service and less expensive to replace!\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eCompatible with Both Stock and Aftermarket Turbochargers\u003c\/li\u003e\n\n\u003cli\u003eCompatible with \"Terminator\" Twin HPOP Setups\u003c\/li\u003e\n\n\u003cli\u003eOPTIONAL Driven Diesel S.S. High Flow Banjo Bolt Kit - RECOMMENDED Made in the USA\u003c\/li\u003e\n\n\u003cli\u003eAll Kits Feed Front Ports (away from Turbo Heat) and Return from Rear Ports\u003c\/li\u003e\n\n\u003cli\u003eCan be Upgraded to \"Dual Stock Pump\" Setup at a later date (support for more HP)\u003c\/li\u003e\n\n\u003cli\u003eComplete Pump\/Filters Assembly is only 13\" Wide\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e1994-1997 Ford F250\/350 OBS 7.3L\u003c\/li\u003e\n\n\u003cli\u003e1994-1998 Ford E-SERIES VAN\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eHigh Quality Fuelab Bypass Fuel Pressure Regulator Made in the USA\u003c\/li\u003e\n\n\u003cli\u003e3\/8\" CNC Bent S.S. Hard Line Used in High Temperature and Tight Radius Locations Made in the USA\u003c\/li\u003e\n\n\u003cli\u003eHigh Quality 3\/8\" S.S. Braided Teflon Hoses with BLACK Protective Covering Made in the USA\u003c\/li\u003e\n\n\u003cli\u003eStainless Steel Regulator Mounting Bracket Made in the USA\u003c\/li\u003e\n\n\u003cli\u003eDriven Diesel Liquid Filled Fuel Pressure Gauge\u003c\/li\u003e\n\n\u003cli\u003eBosch Electric Fuel Pump (same pump as 99-03 Ford Super Duty)\u003c\/li\u003e\n\n\u003cli\u003eNew Driven Diesel Mounting Bracket Assembly (Improved Fit and Flexibility) Made in the USA\u003c\/li\u003e\n\n\u003cli\u003eNEW DRIVEN DIESEL Billet Pre \u0026amp; Post Pump Fuel Filter Heads Made in the USA\u003c\/li\u003e\n\n\u003cli\u003eBaldwin Pre \u0026amp; Post Pump Fuel Filter Elements Made in the USA\u003c\/li\u003e\n\n\u003cli\u003e20' of #6 Fuel Line and All Necessary Fittings\u003c\/li\u003e\n\n\u003cli\u003eDriven Diesel OBS Fuel Pump Wiring Harness w\/Pump Controller Made in the USA\u003c\/li\u003e\n\n\u003cli\u003eAll Necessary Hardware for Installation\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eThis kit RETAINS the fuel tank selector valve...you will still be able to use BOTH fuel tanks using the switch on the dash, like you always have\u003c\/li\u003e\n\n\u003cli\u003eWhile we have done everything we can to make this the most compact fuel pump and filter mount on the market at only 13\" wide, there are a few applications where the mount will not fit inside the frame. If your truck doesn't have enough space inside the frame, this kit CAN be used outside the frame \u003c\/li\u003e\n\n\u003cli\u003e94-98 E-SERIES VAN OWNERS: This kit may NOT be a direct bolt-in for the van. Some customers have modified our kit or their van to use this product. While we don't believe that the modifications are significant, we are not aware of the specifics of the modifications and we can NOT provide support for fitting this kit to an E-Series Van\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Driven Diesel","offers":[{"title":"Default Title","offer_id":45082207977629,"sku":"DD-73FS-OBSFS-1P-V2","price":1644.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198818852.jpg?v=1713435367"},{"product_id":"precision-parts-billet-aluminum-diesel-sump-with-integrated-return-for-cummins-duramax-powerstroke-dp0477","title":"Precision Parts Billet Aluminum Diesel Sump with Integrated Return For Cummins Duramax Powerstroke","description":"\u003csection data-scroll=\"\" class=\"cmp-product-section cmp-product-description open animate--fade-in\"\u003e\n\u003cdiv class=\"cmp-product-section__inner\"\u003e\n\u003cdiv class=\"cmp-product-description__content\"\u003e\n\u003csection data-scroll=\"\" class=\"cmp-product-section cmp-product-description open animate--fade-in\"\u003e\n\u003cdiv class=\"cmp-product-section__inner\"\u003e\n\u003cdiv class=\"cmp-product-description__content\"\u003e\n\u003cp\u003eThe Precision Parts Billet Fuel Tank Sump with a built-in fuel return is the superior choice for optimizing fuel delivery and facilitating seamless customization when integrating your aftermarket fuel system. Say goodbye to the common 1\/4 tank issues associated with in-tank draw straws used in systems like AirDog and FASS. Our billet sump boasts a one-hole design, simplifying installation with only a single hole to drill.\u003c\/p\u003e\n\u003cp\u003eCrafted with precision, the Precision Parts billet sump features a machined groove for the o-ring gasket, ensuring a leak-free seal. The inner-ring is thoughtfully designed to fit snugly into the tank without necessitating removal from the truck. As part of our commitment to convenience, we even include a hole saw for effortless tank drilling!\u003c\/p\u003e\n\u003cp\u003eWhat sets this sump apart from others in the Precision Parts lineup is its innovative built-in return. Unlike traditional aftermarket fuel systems that may require cutting and \"teeing\" into the factory fuel filler neck, our design eliminates this need. By utilizing the built-in return port, you can effortlessly route return fuel back to the tank without modifying other components, ensuring a clean and straightforward installation.\u003c\/p\u003e\n\u003cp\u003eFor superior fuel quality, the Precision Parts Sump incorporates a stand pipe that positions the returned fuel above the fuel feed. This ingenious design prevents the possibility of feeding your engine aerated return fuel, enhancing overall performance. The package includes barbed fittings for 1\/2\" hose, adding to the versatility of this top-tier sump.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-In Fuel Return\u003c\/li\u003e\n\u003cli\u003eNo Tank Drop Installation\u003c\/li\u003e\n\u003cli\u003eStand Pipe Separates Return Fuel \u0026amp; Feed\u003c\/li\u003e\n\u003cli\u003eCrafted From Aircraft Grade T6 Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eCompatible with Stock \u0026amp; Aftermarket Fuel Tanks\u003c\/li\u003e\n\u003cli\u003e1\/4 NPT Drain - Should You Need To Drain Your Tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"b-desc\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Precision Parts Billet Sump\u003c\/li\u003e\n\u003cli\u003e1 x Holesaw\u003c\/li\u003e\n\u003cli\u003e2 x Mounting Bolts\u003c\/li\u003e\n\u003cli\u003e1 x Drain Plug \u003c\/li\u003e\n\u003cli\u003e2 x Washers\u003c\/li\u003e\n\u003cli\u003e1 x O-ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"b-desc\"\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal - Cutting Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cdiv class=\"b-desc\"\u003e\n\u003cstrong\u003eNote: \u003c\/strong\u003eWhile this sump is ideal for a wide range of applications, it is not recommended for off-road use or vehicles with potential ground clearance issues. Exercise extra caution to ensure the fuel tank is free of debris after drilling.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection data-scroll=\"\" class=\"cmp-product-section cmp-product-specification animate--fade-in\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection data-scroll=\"\" class=\"cmp-product-section cmp-product-specification animate--fade-in\"\u003e\u003c\/section\u003e","brand":"Precision Parts","offers":[{"title":"Default Title","offer_id":45082661453981,"sku":"DP0477","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198823669.png?v=1713437419"},{"product_id":"airdog-ii-5g-165-gph-fuel-pump-sump-kit-for-1999-2003-ford-7-3l-powerstroke","title":"AirDog II 5G 165 GPH Fuel Pump \u0026 Sump Kit For 1999-2003 Ford 7.3L Powerstroke","description":"\u003cp\u003eThis is the AirDog® II-5G DF-165-5G fuel system for the 1999-2003 Ford 7.3L Powerstroke. This replaces the factory frame rail fuel pump. This diesel lift pump mounts to the frame rail using the supplied sandwich plate mounting system. The suction side hooks up to the factory suction line on the frame rail. The pressure side connects to the factory feed line to the injection pump. The AirDog® Air\/Vapor return is sent back to the tank through a filler neck return tee. This is a 165GPH (Gallon Per Hour) lift pump system for moderately modified trucks. Check out our installation manual for a list of parts that are included with this kit. \u003c\/p\u003e\n\u003cp\u003eThe PureFlow AirDog® universal fuel sump helps aid aftermarket fuel systems by utilizing gravity to pull fuel from the tank. Our redesigned sump has both a suction and return port! We integrated a dual o-ring seal to prevent leaks! The installation of our fuel sump eliminates the common 1\/4 tank suction issue associated with a draw straw-style fuel pickup. This sump is manufactured in America using corrosion resistant components.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFuel System Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarger Ports Over Previous Pumps\u003c\/li\u003e\n\u003cli\u003eIncreases Engine Efficiency\u003c\/li\u003e\n\u003cli\u003eProvides Better Fuel Flow At Pressure\u003c\/li\u003e\n\u003cli\u003eReliable \u0026amp; Quiet 5G Technology\u003c\/li\u003e\n\u003cli\u003e12-Gauge Wiring Harness\u003c\/li\u003e\n\u003cli\u003eLow Flow Return For Reduce Aeration\u003c\/li\u003e\n\u003cli\u003eIntegrated Diaphragm Fuel Pressure Regulator\u003c\/li\u003e\n\u003cli\u003eDemand Flow Design\u003c\/li\u003e\n\u003cli\u003e165 Gallons Per Hour \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSump Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCan be Installed Without Dropping the Fuel Tank\u003c\/li\u003e\n\u003cli\u003eEliminate 1\/4 Tank Problems\u003c\/li\u003e\n\u003cli\u003eFeed and Return Port\u003c\/li\u003e\n\u003cli\u003eUses Corrosion Resistant Components\u003c\/li\u003e\n\u003cli\u003eInstallation Takes Less Than an Hour\u003c\/li\u003e\n\u003cli\u003eDual O-Ring Seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1999-2003 Ford F-250\/F-350\/F-450 7.3L Powerstroke \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAirDog II 5G 165 GPH Fuel Pump\u003c\/li\u003e\n\u003cli\u003eAirDog Fuel Sump \u003c\/li\u003e\n\u003cli\u003eFuel Filter\u003c\/li\u003e\n\u003cli\u003eWater Separator\u003c\/li\u003e\n\u003cli\u003eWiring Harness\u003c\/li\u003e\n\u003cli\u003eFuel Lines \u0026amp; Fittings\u003c\/li\u003e\n\u003cli\u003eBrackets\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eNot For Sale Or Street Use In California\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AirDog","offers":[{"title":"Default Title","offer_id":46967283712157,"sku":"A7SABF592 | AD09SMP","price":1026.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_43d8f8ce-8ee4-43a1-8b14-b093174f8f3f.webp?v=1751038887"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/collections\/F198662912_644a2e38-e28e-437e-a39c-a8ec8d2490ff.jpg?v=1791892879","url":"https:\/\/rudysdiesel.com\/collections\/7-3l-powerstroke-fuel-system-components.oembed","provider":"Rudy's Performance Parts","version":"1.0","type":"link"}