{"title":"Exterior","description":"\u003cp\u003eFind high-quality exterior parts \u0026amp; accessories at Rudy's Performance Parts. Improve performance and reliability today!\u003c\/p\u003e","products":[{"product_id":"icon-impact-series-front-bumper-w-skid-plate-for-17-19-f-150-raptor-95153","title":"Icon IMPACT Series Front Bumper w\/ Skid Plate For 17-19 F-150 Raptor","description":"\u003cp\u003eICON Impact Series Off-Road Armor is designed for the off-road enthusiast seeking a higher level of performance and protection. Staying true to ICON’s holistic engineering approach, Impact Series armor has been thoroughly tested through countless hours of research and development to ensure precise fitment, proper clearance, exceptional durability, and maximum strength.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eModular design with removable\/replaceable wings\u003c\/li\u003e\n\n\u003cli\u003eMaximized ground clearance without cutting of the frame\u003c\/li\u003e\n\n\u003cli\u003eIncreased air flow to the intercooler without the need to relocate\u003c\/li\u003e\n\n\u003cli\u003eAccommodates a 40” light bar on top of center section\u003c\/li\u003e\n\n\u003cli\u003eIntegrated universal light mounts in wing sections\u003c\/li\u003e\n\n\u003cli\u003eComes with radar\/ adaptive cruise control bracket\u003c\/li\u003e\n\n\u003cli\u003eRemovable honeycomb mesh front and wing grills to allow for personal customization\u003c\/li\u003e\n\n\u003cli\u003eFollows OE styling cues \u0026amp; body lines\u003c\/li\u003e\n\n\u003cli\u003eIMPACT Series Skid Plate covers the lower control arm pivots\u003c\/li\u003e\n\n\u003cli\u003eCompatible with stock skid plate\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTECH INFO:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBUMPER THICKNESS:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eSkin: 1\/8” Steel\u003c\/li\u003e\n\n\u003cli\u003eRecovery tabs: 1\/2” Steel\u003c\/li\u003e\n\n\u003cli\u003eMounts \/ Sub Structure: 1\/4” Steel\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eSKID PLATE THICKNESS:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e3\/16” Aluminum\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRECOVERY POINTS:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFits standard 7\/8\" shackles \u0026amp; accessories\u003c\/li\u003e\n\n\u003cli\u003eOE recovery points are lowest approach contact point in stock trim, but are relocated higher with ICON Impact Series bumper for improved ground clearance while retaining off-road functionality\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eIMPACT SERIES DIMENSIONS VS STOCK:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eTop tube of bumper: +1” further than stock\u003c\/li\u003e\n\n\u003cli\u003eBottom of bumper: -1” less than stock (improved approach angle)\u003c\/li\u003e\n\n\u003cli\u003eRecovery tabs: +2” (higher than stock, providing improved approach angle)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eADDITIONAL DETAILS:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e89lbs assembled weight with hardware \u0026amp; radar bracket\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":44932559437981,"sku":"95153","price":1589.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198708408.jpg?v=1712571345"},{"product_id":"rigid-industries-07-17-jeep-jk-dual-d-series-pro-a-pillar-mount-d-series-pro-40335-flwb-40335","title":"Rigid Industries 07-17 Jeep JK Dual D-Series Pro A-Pillar Mount D-Series Pro 40335","description":"\u003cp\u003eAll of RIGIDs grilles, OE Brackets, and Mounts are made with stainless steel and covered with UV and abrasion resistant powder coat to ensure years of use in the harshest conditions. This 2007-2015 Jeep JK A-Pillar Mount Kit fits 4 RIGID D-Series or Radiance pod LED Lights.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLights Sold Separately\u003c\/li\u003e\n\u003cli\u003eAggressive RIGID Styling\u003c\/li\u003e\n\u003cli\u003eUV and Abrasion Resistant Powder Coat\u003c\/li\u003e\n\u003cli\u003eStainless Steel Construction\u003c\/li\u003e\n\u003cli\u003eBacked By RIGID Limited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Industries","offers":[{"title":"Default Title","offer_id":44932658725021,"sku":"FLWB-40335","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198739008.jpg?v=1712572049"},{"product_id":"addictive-desert-designs-bomber-front-skid-plate-kit-for-2021-2022-ford-bronco-ac23008na03","title":"Addictive Desert Designs Bomber Front Skid Plate Kit For 2021-2022 Ford Bronco","description":"\u003cp\u003eThe Bomber Front Skid Plate was designed to replace the plastic OEM skid plate, and flow with the contours of our Bomber Bronco Front Bumper. It is constructed from 3\/16-inch aluminum alloy, and finished in a satin black powder coat to protect it from rust. This skid plate can protect the front underbelly of you Bronco in a way that plastic can not. As always, this is fully bolt-on and Made in America.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFully bolt-on\u003c\/li\u003e\n\n\u003cli\u003eMade in America\u003c\/li\u003e\n\n\u003cli\u003eHigh grade 3\/16” aluminum alloy\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2021-2022 Ford Bronco\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFor use with Stealth Fighter bumper\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":44932928962717,"sku":"AC23008NA03","price":798.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198751813.jpg?v=1712573880"},{"product_id":"addictive-desert-designs-bomber-rigid-front-bumper-for-2021-2022-ford-bronco-f230194130103","title":"Addictive Desert Designs Bomber\/Rigid Front Bumper For 2021-2022 Ford Bronco","description":"\u003cp\u003eThe Bomber is a tight fitting front bumper for the new Bronco, that follows the contours of the body perfectly. At the center of the bumper, is a satin black aluminum panel that frames 3 mounting points for Rigid 360 6-inch lights (also available with Baja Designs Lighting). At the sides of the bumper are mounting points for cube lights, framed by satin black aluminum panels. The Bomber is constructed from modern plate steel, finished in a hammer black powder coat. The aluminum panels are finished in a satin black powder coat.\u003c\/p\u003e\n\n\u003cp\u003eThe approach angle of the Bomber is improved over the factory bumper, and provides higher clearance. The OEM parking sensors are incorporated into the design of the bumper, and the tow hooks are allowed to remain underneath the bumper. There are 2 heavily reinforced clevis mounts that take 3\/4-inch D-ring shackles for recovery options. We offer an optional 3\/16-inch vented aluminum skid plate that provides superior protection over the factory plastic skid plate. An Adaptive Cruise Control Relocation Bracket is also available, which allows you to retain full functionality of the feature. As always, this is fully bolt-on and Made in America.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFully bolt-on\u003c\/li\u003e\n\n\u003cli\u003eMade in America\u003c\/li\u003e\n\n\u003cli\u003eRetains OEM tow hooks\u003c\/li\u003e\n\n\u003cli\u003eModern plate steel design\u003c\/li\u003e\n\n\u003cli\u003eRetains OEM parking sensors\u003c\/li\u003e\n\n\u003cli\u003eSide mounts for 2 cube lights\u003c\/li\u003e\n\n\u003cli\u003eMounts for 3 Rigid 360 6\" lights\u003c\/li\u003e\n\n\u003cli\u003eOptional full 3\/16\" aluminum skid plate\u003c\/li\u003e\n\n\u003cli\u003eOptional adaptive cruise control bracket\u003c\/li\u003e\n\n\u003cli\u003eReinforced clevis mounts for 3\/4\" D-rings\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2021-2022 Ford Bronco\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eCutouts For Rigid Fog Lights\u003c\/li\u003e\n\n\u003cli\u003eDirect Replacement Skid Plate And Relocation Bracket Available Separately \u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":44932930961565,"sku":"F230194130103","price":2198.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198751916.jpg?v=1712573897"},{"product_id":"addictive-desert-designs-stealth-fighter-front-skid-plate-for-21-22-ford-bronco-ac23007na03","title":"Addictive Desert Designs Stealth Fighter Front Skid Plate For 21-22 Ford Bronco","description":"\u003cp\u003eThe Stealth Fighter Bronco Front Skid Plate replaces the stock plastic OEM skid plate. Manufactured from 3\/16-inch aluminum alloy, it protects the front underbelly of your Bronco in a way that plastic cannot. As always, this skid is fully bolt-on and Made in America.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFully bolt-on\u003c\/li\u003e\n\n\u003cli\u003eMade in America\u003c\/li\u003e\n\n\u003cli\u003eHigh grade 3\/16” aluminum alloy\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2021-2022 Ford Bronco\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFor use with Stealth Fighter bumper\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":44932934533277,"sku":"AC23007NA03","price":798.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198751801.jpg?v=1712573920"},{"product_id":"arb-replacement-black-winch-steel-front-bumper-for-2021-2022-ford-bronco-3480010","title":"ARB Replacement Black Steel Front Winch Bumper \u0026 Mount Kit For 2021-2024 Ford Bronco","description":"\u003cp\u003eThe ARB Summit Bumper is designed as a full bumper replacement with 4WD use in mind. Compatible with winches up to 10,000lb, it provides needed off-road protection, twin jack points, and rated recovery points, while accommodating adaptive cruise control and parking sensors. The width of the Summit Bumper blends seamlessly into the vehicle design, complementing either wide or narrow fender flares. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDurable, steel construction for maximum protection\u003c\/li\u003e\n\u003cli\u003eCompatible with winches up to 10,000lb\u003c\/li\u003e\n\u003cli\u003eTwin jack points located in lower pan to suit ARB Jack and mechanical jacks\u003c\/li\u003e\n\u003cli\u003eTwin forged bar-mounted ARB Rated 8T recovery points\u003c\/li\u003e\n\u003cli\u003eWing design allows for a 37 tire to be fitted (suitable suspension lift and rim off set required)\u003c\/li\u003e\n\u003cli\u003eFinished in Integrit black textured powder coat\u003c\/li\u003e\n\u003cli\u003eSuits the use of OE LED fog lights \u003c\/li\u003e\n\u003cli\u003eProvision for Driving Lights\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2021-2024 Ford Bronco \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eARB Summit Winch Bumper \u003c\/li\u003e\n\u003cli\u003eBumper Mounting Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e3 Year Warranty \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ARB","offers":[{"title":"Default Title","offer_id":44932935876765,"sku":"3480010B","price":1849.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/Untitled_36.jpg?v=1753380132"},{"product_id":"addictive-desert-designs-bomber-baja-front-bumper-for-2021-2022-ford-bronco-f230194120103","title":"Addictive Desert Designs Bomber\/Baja Front Bumper For 2021-2022 Ford Bronco","description":"\u003cp\u003eThe Bomber is a tight fitting front bumper for the new Bronco, that follows the contours of the body perfectly. At the center of the bumper is a satin black aluminum panel that frames 3 mounting points for Baja Designs LP4 lights (also available with Rigid Lighting). At the sides of the bumper are mounting points for cube lights, framed by satin black aluminum panels. The Bomber is constructed from modern plate steel, and finished in a hammer black powder coat. The aluminum panels are finished in a satin black powder coat.\u003c\/p\u003e\n\n\u003cp\u003eThe approach angle of the Bomber is improved over the factory bumper, and it also provides higher clearance. The OEM parking sensors are incorporated into the design of the bumper, and the tow hooks are allowed to remain underneath the bumper. There are 2 heavily reinforced clevis mounts that take 3\/4-inch D-ring shackles for recovery options. We offer an optional 3\/16-inch vented aluminum skid plate that provides superior protection over the factory plastic skid plate. An Adaptive Cruise Control Relocation Bracket is also available, which allows you to retain full functionality of the feature. As always, this is fully bolt-on and Made in America.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFully bolt-on\u003c\/li\u003e\n\n\u003cli\u003eMade in America\u003c\/li\u003e\n\n\u003cli\u003eRetains OEM tow hooks\u003c\/li\u003e\n\n\u003cli\u003eModern plate steel design\u003c\/li\u003e\n\n\u003cli\u003eRetains OEM parking sensors\u003c\/li\u003e\n\n\u003cli\u003eSide mounts for 2 cube lights\u003c\/li\u003e\n\n\u003cli\u003eMounts for 3 Baja Designs LP4 lights\u003c\/li\u003e\n\n\u003cli\u003eOptional full 3\/16\" aluminum skid plate\u003c\/li\u003e\n\n\u003cli\u003eOptional adaptive cruise control bracket\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2021-2022 Ford Bronco\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement Skid Plate And Relocation Bracket Available Separately \u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":44932936597661,"sku":"F230194120103","price":2198.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198751894.jpg?v=1712573935"},{"product_id":"arb-non-winch-steel-front-bumper-for-2021-2022-ford-bronco-with-narrow-flares-3280020","title":"ARB Non-Winch Steel Front Bumper \u0026 Mount Kit For 21-24 Ford Bronco (Narrow Body)","description":"\u003cp\u003eThe ARB Non-Winch Bumper (narrow fender flares) is designed as a full bumper replacement with the four-wheel driver in mind. Providing needed protection, it accommodates adaptive cruise control and parking sensors while adding off-road essentials such as an integrated LED lightbar, twin jack points, and rated recovery points. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific design suits the Ford Bronco narrow fender flares\u003c\/li\u003e\n\u003cli\u003e3mm laser cut and press formed center panel with NP provision in vintage silver\u003c\/li\u003e\n\u003cli\u003eDurable steel construction for maximum protection\u003c\/li\u003e\n\u003cli\u003ePre-assembled with fog housing and integrated LED light bar\u003c\/li\u003e\n\u003cli\u003eTwin jack points located in center pan\u003c\/li\u003e\n\u003cli\u003eTwin-forged chassis-mounted ARB Rated 8T recovery points \u003c\/li\u003e\n\u003cli\u003eWing design allows for a 37-inch tire (suitable suspension lift and rim off set required)\u003c\/li\u003e\n\u003cli\u003eZinc rich primer for additional corrosion resistance\u003c\/li\u003e\n\u003cli\u003eFinished in Integrit black, textured powder coat\u003c\/li\u003e\n\u003cli\u003ePress formed apertures in bumper for fitment of fog light surround OE LED fog lights\u003c\/li\u003e\n\u003cli\u003eProvision for Driving Lights\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2021-2024 Ford Bronco w\/ Narrow Body Style \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eARB Non-Winch Front Bumper \u003c\/li\u003e\n\u003cli\u003eBumper Mounting Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e3 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ARB","offers":[{"title":"Default Title","offer_id":44932941086877,"sku":"3280020B","price":2060.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_d3e68e22-c0ab-459f-a574-9732a8c0d8bb.webp?v=1758052390"},{"product_id":"arb-black-textured-rear-bumper-for-2021-2022-ford-bronco-narrow-body-style-5680020","title":"ARB Black textured Rear Bumper For 2021-2025 Ford Bronco (Narrow Body Style)","description":"\u003cp\u003eCombining functionality, strength and protection, ARB offers a rear bumper for the Ford Bronco (narrow fender flares) that retains OE tow bar and wiring. The rear bumper includes two jack points and incorporates twin chassis-mounted rated recovery points. To complement the ARB Bronco protection equipment range, the bumper is finished in Integrit (TM) textured black powder coat.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific designs suit Ford Bronco narrow fender flares\u003c\/li\u003e\n\u003cli\u003eCenter Panel Houses The Two Central Sensors And OE Tow Bar\u003c\/li\u003e\n\u003cli\u003eDurable steel construction delivers maximum protection\u003c\/li\u003e\n\u003cli\u003eTwin jack points located in outer wings suit ARB Jack or mechanical jacks\u003c\/li\u003e\n\u003cli\u003eLicense plate relocated to spare wheel\u003c\/li\u003e\n\u003cli\u003eLED license plate included in kit\u003c\/li\u003e\n\u003cli\u003eCompatible with rear parking sensors and OE tow bar \u003c\/li\u003e\n\u003cli\u003eZinc rich primer for additional corrosion resistance\u003c\/li\u003e\n\u003cli\u003eFinished in Integrit black textured powder coat\u003c\/li\u003e\n\u003cli\u003eVintage silver center panel houses the two central sensors and OE tow bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2021-2025 Ford Bronco w\/ Narrow Body Style\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eARB Rear Bumper\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e3 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ARB","offers":[{"title":"Default Title","offer_id":44932942233757,"sku":"5680020","price":798.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_1f463079-5231-4df2-b89b-ecb7850b6349.jpg?v=1758049578"},{"product_id":"addictive-desert-designs-stealth-fighter-front-bumper-for-2021-2022-ford-bronco-f230142210103","title":"Addictive Desert Designs Stealth Fighter Front Bumper For 2021-2022 Ford Bronco","description":"\u003cp\u003eFor those who are looking for a sleek, low-profile front bumper for their 2021 Bronco, the Stealth Fighter hits the mark. Designed for performance and clearance off-road, it also brings bold styling to the front end. At the center of the bumper are inset mounting points for up to a 30-inch radius light bar, or 8 cube lights. Towards the ends of the bumper are 2 additional inset mounting points, that can take a cube light each. This design retains the OEM parking sensors, and we include plugs if your model does not have sensors. Our adaptive cruise control relocation bracket is available as well.\u003c\/p\u003e\n\n\u003cp\u003eThe bottom panel features louvers to allow airflow to the intercooler. We designed a 3\/16-inch aluminum skid plate to replace the factory plastic skid plate. This is an optional feature, as you can retain the factory skid plate with the Stealth Fighter bumper. There are 2 reinforced clevis mounts that take 3\/4-inch D-Rings, that provide recovery options if you manage to get stuck in the mud, sand, or snow. As always, this Bronco front bumper is fully bolt-on and Made in America.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFully bolt-on\u003c\/li\u003e\n\n\u003cli\u003eMade in America\u003c\/li\u003e\n\n\u003cli\u003eOptional 3\/16\" Aluminum Skid Plate\u003c\/li\u003e\n\n\u003cli\u003eLow Profile Radius Plate Steel Design\u003c\/li\u003e\n\n\u003cli\u003eReinforced Clevis Mounts for 3\/4\" D-Rings\u003c\/li\u003e\n\n\u003cli\u003eOne Cube Light Mount Behind Each Side Panel\u003c\/li\u003e\n\n\u003cli\u003eVented Lower Panel with Louvers for Intercooler Airflow\u003c\/li\u003e\n\n\u003cli\u003eAdaptive Cruise Control Relocation Bracket Available Separately\u003c\/li\u003e\n\n\u003cli\u003eRetains OEM Parking Sensors, and Includes Plugs for Non-Sensor Models\u003c\/li\u003e\n\n\u003cli\u003eUniversal Light Mount for Up to 30-Inch Radius Light Bar or 8 Cube Lights\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2021-2022 Ford Bronco\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement Skid Plate And Relocation Bracket Sold Seperatley \u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":44932943347869,"sku":"F230142210103","price":2198.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198751852.jpg?v=1712573970"},{"product_id":"rigid-industries-high-power-40-50-inch-e-series-and-20-30-inch-rds-series-harness-40190","title":"Rigid Industries High Power 40-50 Inch E-Series and 20-30 Inch RDS-Series Harness 40190","description":"\u003cp\u003eThis 13 foot\/4 meter wiring harness is designed to connect a single LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light.\u003c\/p\u003e\n\u003cp\u003eIt incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID LED Lights: 40 inch-50 inch E-Series PRO, 20 inch-54 inch RDS-Series PRO.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned And Engineered By RIGID\u003c\/li\u003e\n\u003cli\u003eCompatible with 40 inch - 50 inch E-Series Pro and 20 inch - 30 inch RDS-Series Pro\u003c\/li\u003e\n\u003cli\u003eSize: 13 Feet\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eLights Included: No\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rigid Industries","offers":[{"title":"Default Title","offer_id":44932943642781,"sku":"FLWB-40190","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198738019.jpg?v=1712573976"},{"product_id":"addictive-desert-designs-bomber-rear-bumper-for-2021-2022-ford-bronco-r230141090103","title":"Addictive Desert Designs Bomber Rear Bumper For 2021-2022 Ford Bronco","description":"\u003cp\u003eADD Offroad's Bomber Rear Bumper for the Ford Bronco is a low-profile and slim fitting bumper that closely follows the body lines of the Bronco. The Bomber is constructed of modern plate steel with a hammer black powder coat finish, and lightweight aluminum alloy panels with a satin black powder coat finish. There are 2 universal mounting points for cube lights towards both ends of the bumper that can provide supplemental lighting at the rear of the truck.\u003c\/p\u003e\n\n\u003cp\u003eThe Bomber features two heavily reinforced clevis mounts that take 3\/4-inch D-rings to provide recovery options. The bumper also has sensor cutouts in order to retain full-functionality of the parking sensor system. The bumper sits just above the OEM tow hooks, allowing them to be used as intended. A license plate bracket is included with the Bomber that relocates the plate above the bumper, and is bolted into the same mounting points as the spare tire carrier. The OEM license plate light can be installed in this new location on the top of the bumper. As always, this is fully bolt-on and Made in America.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFully bolt-on\u003c\/li\u003e\n\n\u003cli\u003eMade in America\u003c\/li\u003e\n\n\u003cli\u003eParking sensor cutouts\u003c\/li\u003e\n\n\u003cli\u003eRetains OEM tow hooks\u003c\/li\u003e\n\n\u003cli\u003eModern plate steel design\u003c\/li\u003e\n\n\u003cli\u003eSide mounts for 2 cube lights\u003c\/li\u003e\n\n\u003cli\u003eRetains OEM parking sensors\u003c\/li\u003e\n\n\u003cli\u003eClevis mounts for 3\/4\" D-rings\u003c\/li\u003e\n\n\u003cli\u003eMounts for cube lights on sides\u003c\/li\u003e\n\n\u003cli\u003eHammer black powder coat finish\u003c\/li\u003e\n\n\u003cli\u003eSatin black powder coat panel finish\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2021-2022 Ford Bronco\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement  \u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":44932945281181,"sku":"R230141090103","price":1898.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198751977.jpg?v=1712573989"},{"product_id":"addictive-desert-designs-rock-fighter-front-skid-plate-for-2021-2022-ford-bronco-ac23005na03","title":"Addictive Desert Designs Rock Fighter Front Skid Plate For 2021-2022 Ford Bronco","description":"\u003cp\u003eThe Rock Fighter Skid Plate replaces the stock plastic OEM skid plate. Made from 3\/16-inch aluminum alloy, it provides protection to the whole front underbelly of your Bronco. As always, this is fully bolt-on and Made in America.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFully bolt-on\u003c\/li\u003e\n\n\u003cli\u003eMade in America\u003c\/li\u003e\n\n\u003cli\u003eHigh grade 3\/16” aluminum alloy\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2021-2022 Ford Bronco\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFor use with Rock Fighter bumper\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":44932948492445,"sku":"AC23005NA03","price":698.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198751791.jpg?v=1712574031"},{"product_id":"arb-silver-under-vehicle-protection-skid-plate-kit-for-2021-2022-ford-bronco-5480100","title":"ARB Silver Under Vehicle Protection Skid Plate Kit For 2021-2022 Ford Bronco","description":"\u003cp\u003eARB created the Under Vehicle Protection Skid Plate Set to be your 2021 Bronco’s first line of defense from the harshest trails, by shielding critical drivetrain components with 3mm of press-formed steel. Laser-cut for an exact fit, the plates bolt onto the bottom of your undercarriage for easy installation. With a Zinc plated and powder-coated finish, the plates reflect a silver textured finish when viewed from the side and both corrosion and scratches. Recessed mounting bolts are protected and easy to remove for vehicle servicing. \u003c\/p\u003e\n\n\u003cp\u003eARB Under Vehicle Protection panels are designed to give protection to vital underbody components including steering, engine sump, transmission and transfer case. Laser cut, press formed and folded 3mm sheet steel is used in ARB UVP to provide superior strength. The ARB UVP to suit the Ford Bronco consist of four carefully designed panels. The front, sump and transmission and transfer case panels bolt directly to the chassis to provide continuous under vehicle protection from the front bumper to the rear of the transfer case. Each UVP panel includes a return edge to add strength to the 3mm panel. To retain the strength and protection required of an ARB UVP, full vehicle servicing will require the removal and refit of panels to obtain access to drain plugs and other service points. This provides an opportunity to check for damage and buildup of dirt and foreign matter. Provision is provided to drain engine oil only with removable insert in the second panel. ARB's UVP will fit with or without an ARB front bumper. Fitment has not been confirmed with other bumper designs.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eLaser cut sheet steel\u003c\/li\u003e\n\n\u003cli\u003e21-Current Ford Bronco, 4-Door\u003c\/li\u003e\n\n\u003cli\u003eKit includes illustrated fitting instructions\u003c\/li\u003e\n\n\u003cli\u003eZinc plated and powder coated in a silver textured finish\u003c\/li\u003e\n\n\u003cli\u003e3mm press-formed, folded sheet steel adds superior strength\u003c\/li\u003e\n\n\u003cli\u003eAll steel components are protected with either powder coat or zinc plating\u003c\/li\u003e\n\n\u003cli\u003eRecessed mounting bolts are protected and easy to remove for vehicle servicing\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2021-2022 Ford Bronco\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eThis ARB UVP set does not fit the Bronco Sport\u003c\/li\u003e\n\n\u003cli\u003eARB’s UVP will fit with or without an ARB front bumper. Fitment has not been confirmed with other bumper designs.\u003c\/li\u003e\n\n\u003cli\u003eTo retain the strength and protection required of an ARB UVP, full vehicle servicing will require the removal and refit of panels to obtain access to drain plugs and other service points. Provision is provided to drain engine oil only with a removable insert in the second panel.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"ARB","offers":[{"title":"Default Title","offer_id":44932949409949,"sku":"5480100","price":807.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198752184.jpg?v=1712574037"},{"product_id":"addictive-desert-designs-rock-fighter-front-bumper-for-2021-2022-ford-bronco-f230181060103","title":"Addictive Desert Designs Rock Fighter Front Bumper For 2021-2022 Ford Bronco","description":"\u003cp\u003eWith the introduction of the new Ford Bronco and it’s rock crawling capabilities, we’ve brought our line of Rock Fighter bumpers to the 2021 Bronco. Designed with heavy trail use in mind, this bumper features high clearance and approach angles. At the center of the bumper is a universal light mount ready for up to a 20-inch radius light bar, or 5 cube lights. There are two light mounts for round lights on top, on either side of the low profile top hoop and standard winch mount.\u003c\/p\u003e\n\n\u003cp\u003eThis Bronco front bumper retains OEM parking sensor locations, and there is an adaptive cruise control relocation bracket available. The Rock Fighter has an integrated bumper skid plate featuring louvers to allow airflow to the intercooler. Additionally, we offer an optional 3\/16-inch aluminum alloy front skid plate to provide superior protection to the underbelly, as opposed to the OEM plastic skid. There are also 2 reinforced clevis mounts for ¾-inch D-rings for recovery options if you find yourself in a tough situation. Designed for off-road function and it’s aggressive styling, the Rock Fighter looks great with any style fenders. As always, this is fully bolt-on and Made in America.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFully Bolt-On\u003c\/li\u003e\n\n\u003cli\u003eMade in America\u003c\/li\u003e\n\n\u003cli\u003eStandard Winch Mount\u003c\/li\u003e\n\n\u003cli\u003eRetains OEM Parking Sensors\u003c\/li\u003e\n\n\u003cli\u003eModern Radius Plate Steel Design\u003c\/li\u003e\n\n\u003cli\u003eOptional 3\/16\" Aluminum Skid Plate\u003c\/li\u003e\n\n\u003cli\u003eTwo Light Mounts on Top for Round Lights\u003c\/li\u003e\n\n\u003cli\u003eReinforced Clevis Mounts for ¾-Inch D-Rings\u003c\/li\u003e\n\n\u003cli\u003eVented Lower Panel with Louvers for Intercooler Airflow\u003c\/li\u003e\n\n\u003cli\u003eUniversal Light Mount for Up to 20-Inch Radius Light Bar or 5 Cube Lights\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2021-2022 Ford Bronco\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement Skid Plate And Relocation Bracket Available Separately \u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":44932951048349,"sku":"F230181060103","price":2498.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198751872.jpg?v=1712574050"},{"product_id":"arb-non-winch-steel-front-bumper-for-2021-2022-ford-bronco-w-wide-body-flares-3280010","title":"ARB Non-Winch Steel Front Bumper \u0026 Mount Kit For 2021-2024 Ford Bronco Wide Body","description":"\u003cp\u003eThe ARB Non-Winch Bumper (wide fender flares) is designed as a full bumper replacement with the four-wheel driver in mind. Providing needed protection, it accommodates adaptive cruise control and parking sensors while adding off-road essentials such as an integrated LED lightbar, twin jack points, and rated recovery points. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific design suits the Ford Bronco wide fender flares\u003c\/li\u003e\n\u003cli\u003e3mm laser cut and press formed center panel with NP provision in vintage silver\u003c\/li\u003e\n\u003cli\u003eDurable steel construction for maximum protection\u003c\/li\u003e\n\u003cli\u003ePre-assembled with fog housing and integrated LED light bar \u003c\/li\u003e\n\u003cli\u003eTwin jack points located in center pan\u003c\/li\u003e\n\u003cli\u003eTwin-forged chassis-mounted ARB Rated 8T recovery points\u003c\/li\u003e\n\u003cli\u003eWing design allows for a 37-inch tire (suitable suspension lift and rim off set required)\u003c\/li\u003e\n\u003cli\u003eZinc rich primer for additional corrosion resistance\u003c\/li\u003e\n\u003cli\u003eFinished in Integrit black, textured powder coat\u003c\/li\u003e\n\u003cli\u003ePress formed apertures in bumper for fitment of fog light surround OE LED fog lights\u003c\/li\u003e\n\u003cli\u003eProvision for Driving Lights\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2021-2024 Ford Bronco w\/ Wide Body Style \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eARB Non-Winch Front Bumper \u003c\/li\u003e\n\u003cli\u003eBumper Mounting Kit \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e3 Year Warranty \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ARB","offers":[{"title":"Default Title","offer_id":44932954554525,"sku":"3280010B","price":1910.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198752132.jpg?v=1712574076"},{"product_id":"arb-black-textured-rear-bumper-for-2021-2022-ford-bronco-wide-body-style-5680010","title":"ARB Textured Black Rear Bumper For 2021-2024 Ford Bronco (Wide Body Style)","description":"\u003cp\u003eCombining functionality, strength and protection, ARB offers a rear bumper for the Ford Bronco (wide fender flares) that retains OE tow bar and wiring. The rear bumper includes two jack points and incorporates twin chassis-mounted rated recovery points. To complement the ARB Bronco protection equipment range, the bumper is finished in Integrit textured black powder coat. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle-specific designs suit Ford Bronco wide fender flares\u003c\/li\u003e\n\u003cli\u003eDurable steel construction delivers maximum protection\u003c\/li\u003e\n\u003cli\u003eTwin jack points located in outer wings suit ARB Jack or mechanical jacks\u003c\/li\u003e\n\u003cli\u003eLicense plate relocated to spare wheel\u003c\/li\u003e\n\u003cli\u003eLED license plate included in kit\u003c\/li\u003e\n\u003cli\u003eCompatible with rear parking sensors and OE tow bar\u003c\/li\u003e\n\u003cli\u003eZinc rich primer for additional corrosion resistance \u003c\/li\u003e\n\u003cli\u003eFinished in Integrit black textured powder coat\u003c\/li\u003e\n\u003cli\u003eVintage silver center panel houses the two central sensors and OE tow bar\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2021-2024 Ford Bronco w\/ Wide Body Style\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eARB Rear Bumper\u003c\/li\u003e\n\u003cli\u003eBumper Mounting Kit \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e3 Year Warranty \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ARB","offers":[{"title":"Bumper ONLY (no install kit)","offer_id":46936163188893,"sku":"5680010","price":798.0,"currency_code":"USD","in_stock":true},{"title":"Bumper + Installation Kit","offer_id":46936163221661,"sku":"5680011 + 6177706","price":1299.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_5ab51e69-81ff-4603-aeec-fa492896fe69.jpg?v=1758050632"},{"product_id":"addictive-desert-designs-rock-fighter-rear-bumper-for-2021-2022-ford-bronco-r23012na01na","title":"Addictive Desert Designs Rock Fighter Rear Bumper For 2021-2022 Ford Bronco","description":"\u003cp\u003eThe Rock Fighter Bronco Rear Bumper was designed to flow seamlessly with the contours of the rear end. It’s low profile, modern plate steel construction is perfect for crawling rocks on the trail. The Rock Fighter retains the OEM tire mount \u0026amp; backup camera, but an included relocation bracket moves the 3rd brake light further up to allow for a 37-inch spare tire to be mounted. Additionally, the bumper retains both the OEM hitch and license plate light.\u003c\/p\u003e\n\n\u003cp\u003eTwo reinforced clevis mounts for ¾-inch D-rings provide recovery options if you find yourself in a tight spot. The Rock Fighter Rear Bumper not only provides you with improved off-road performance, but brings a more aggressive styling than the factory plastic bumpers. As always, this is fully bolt-on and Made in America.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFully Bolt-On\u003c\/li\u003e\n\n\u003cli\u003eMade in America\u003c\/li\u003e\n\n\u003cli\u003eRetains OEM Hitch\u003c\/li\u003e\n\n\u003cli\u003eBackup sensor cutouts\u003c\/li\u003e\n\n\u003cli\u003eModern Plate Steel Design\u003c\/li\u003e\n\n\u003cli\u003eRetains OEM Parking Sensors\u003c\/li\u003e\n\n\u003cli\u003eRetains OEM License Plate Light\u003c\/li\u003e\n\n\u003cli\u003eHammer black powder coat finish\u003c\/li\u003e\n\n\u003cli\u003eSatin black powder coat panel finish\u003c\/li\u003e\n\n\u003cli\u003eReinforced Clevis Mounts for ¾” D-Rings\u003c\/li\u003e\n\n\u003cli\u003eRetains OEM Tire Mount \u0026amp; Backup Camera\u003c\/li\u003e\n\n\u003cli\u003e3rd Brake Light Relocation Bracket Included\u003c\/li\u003e\n\n\u003cli\u003eSpare tire 3rd brake light relocation bracket for up to a 37-inch tire\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2021-2022 Ford Bronco\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDirect Replacement Skid Plate And Relocation Bracket Available Separately \u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":44932956618909,"sku":"R23012NA01NA","price":1698.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198751938.jpg?v=1712574106"},{"product_id":"bd-power-air-compressor-kit","title":"BD-Power Air Compressor Kit","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBD 1030122B\u003c\/p\u003e","brand":"BD-Power","offers":[{"title":"Default Title","offer_id":45073159028893,"sku":"1030122B","price":611.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198662814.jpg?v=1713403807"},{"product_id":"teraflex-adjustable-spare-tire-mounting-kit-for-18-20-jeep-wrangler-jl-5x5","title":"TeraFlex Adjustable Spare Tire Mounting Kit For 18-20 Jeep Wrangler JL - 5x5\"","description":"\u003cp\u003e\u003cstrong\u003eTeraFlex Adjustable Spare Tire Mounting Kit For 2018-2020 Jeep Wrangler JL - 5X5\"\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eDesigned to accommodate up to a 39” tire, the TeraFlex JL\/JLU: Alpha HD Adjustable Spare Tire Mounting Kit w\/ 3rd Brake Light Mount \u0026amp; Rearview Camera Mount will secure your full-size spare tire over the most extreme trails and rugged terrain. Mounts to the factory tailgate. Complete adjustability includes vertical as well as fore and aft adjustments. The heavily gusseted tire mount is formed and welded from CNC laser cut steel for superior strength, while the adjustable tire carrier is constructed from strong and lightweight 6061-T6 extruded aluminum.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e• JL Wrangler (2-door)\u003cbr\u003e• JLU Wrangler Unlimited (4-door)\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e• Max Tire: 39” (when used w\/ tailgate reinforcement)\u003cbr\u003e• Max Tire: 35” (when used w\/ factory tailgate and no reinforcement)\u003cbr\u003e• Wheel Pattern: 5x5”\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e• Alpha HD Adjustable Spare Tire Mounting Kit - 5x5”\u003cbr\u003e• Quick release 3rd Brake Light Mount\u003cbr\u003e• Billet aluminum Rearview Camera Mount\u003cbr\u003e• All necessary hardware\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e• Max Tire: 39” (w\/ tailgate reinforcement)\u003cbr\u003e• Max Tire: 35” (w\/out tailgate reinforcement)\u003cbr\u003e• Wheel Pattern: 5x5”\u003cbr\u003e• innovative and unique design w\/ easy adjustability\u003cbr\u003e• Vertical as well as fore and aft adjustments\u003cbr\u003e• Relocates 3rd brake light from behind tailgate to behind spare tire\u003cbr\u003e• 3rd brake light quick release\u003cbr\u003e• Includes new hard-anodized billet aluminum rearview camera mount\u003cbr\u003e• Maintains single-handed entry to the rear cargo area\u003cbr\u003e• Works w\/ OEM and most aftermarket bumpers\u003cbr\u003e• Spare tire mount is formed and welded from CNC laser cut steel for superior strength\u003cbr\u003e• Adjuster made from strong and lightweight 6061-T6 extruded aluminum\u003cbr\u003e• Simple installation using common hand tools\u003cbr\u003e• No drilling required – uses factory mounting locations\u003cbr\u003e• 1,000-hour extreme salt spray testing\u003cbr\u003e• OEM Quality UV resistant powder coat finish w\/ 3,000-hour accelerated weather testing\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e• The factory tailgate can only support the weight of up to a 35” spare tire and wheel combo w\/out reinforcement. A tailgate reinforcement is required to support up to a 39” spare tire and wheel combo. TeraFlex JL\/JLU: Alpha HD Tailgate Reinforcement coming soon!\u003cbr\u003e• A spare tire larger than 39” will interfere with the stock rear bumper.\u003cbr\u003e• Tire size fitment and aftermarket bumper clearance varies by manufacturers; please confirm fitment before purchase.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstall Time:\u003c\/strong\u003e 1 Hour\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/m82IwizGY8A\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Teraflex","offers":[{"title":"Default Title","offer_id":45074801197213,"sku":"4838910","price":402.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198713983.jpg?v=1713409675"},{"product_id":"bubba-rope-1-4-mini-gator-jaw-synthetic-shackle-11000-pound-breaking-strength","title":"Bubba Rope 1\/4\" Mini Gator Jaw Synthetic Shackle 11,000 Pound Breaking Strength","description":"\u003cp\u003e\u003cstrong\u003eBubba Rope 1\/4\" Mini Gator Jaw Synthetic Shackle 11000 Pound Breaking Strength\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eMini Gator-Jaw® shackles are made from Plasma® rope - the highest strength synthetic rope available. Mini Gator-Jaw® shackles are stronger than comparable steel shackles or carabiners. These tow rope connectors won’t rust and are so light they float. Towing applications include: ATV, UTV, personal water craft and other various power sport equipment.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAdvantages Over Steel Shackles:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eStronger than steel -11,000 lb. breaking strength!\u003c\/li\u003e\n\n\u003cli\u003eIt floats - no more losing shackles in the water or muck!\u003c\/li\u003e\n\n\u003cli\u003eFlexible - easily wraps around the most difficult pulling points!\u003c\/li\u003e\n\n\u003cli\u003eOne piece construction - no pins to fasten!\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eUses:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eATV \u0026amp; UTV Off-road Vehicles\u003c\/li\u003e\n\n\u003cli\u003ePersonal Watercraft\u003c\/li\u003e\n\n\u003cli\u003eBoating\u003c\/li\u003e\n\n\u003cli\u003eCamping\u003c\/li\u003e\n\n\u003cli\u003eTie-down Securement\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Bubba Rope","offers":[{"title":"Default Title","offer_id":45075129532573,"sku":"176744","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198721279.jpg?v=1713412114"},{"product_id":"bubba-rope-7-16-blue-yellow-gator-jaw-pro-synthetic-shackle-52300-pound-breaking-strength","title":"Bubba Rope 7\/16\" Blue \u0026 Yellow Gator Jaw Pro Synthetic Shackle 52,300 Pound Breaking Strength","description":"\u003cp\u003e\u003cstrong\u003eBubba Rope 7\/16\" Blue \u0026amp; Yellow Gator Jaw Pro Synthetic Shackle 52,300 Pounds\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAdvantages Over Steel Shackles:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eStronger than steel - 52,300 lb. breaking strength!\u003c\/li\u003e\n\n\u003cli\u003eIt floats - no more losing shackles in the water or muck!\u003c\/li\u003e\n\n\u003cli\u003eFlexible - easily wraps around the most difficult pulling points!\u003c\/li\u003e\n\n\u003cli\u003eOne piece construction - no pins to fasten!\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eUses:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eOff-Road Recovery\u003c\/li\u003e\n\n\u003cli\u003eMarine\u003c\/li\u003e\n\n\u003cli\u003eFarming\u003c\/li\u003e\n\n\u003cli\u003eIndustrial\u003c\/li\u003e\n\n\u003cli\u003eMining\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e52,300 lbs. breaking strength\u003c\/li\u003e\n\n\u003cli\u003eRope diameter 7\/16\"\u003c\/li\u003e\n\n\u003cli\u003eMade from Plasma® UHMPE\u003c\/li\u003e\n\n\u003cli\u003eBow width: 6\"\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHow To Use:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eOpen Gator-Jaw® PRO shackle by loosening and slipping off loop over knot\u003c\/li\u003e\n\n\u003cli\u003eThread through eye of Bubba Rope or strap and through tow point\u003c\/li\u003e\n\n\u003cli\u003eCheck your vehicle’s owner’s manual for proper attachment points\u003c\/li\u003e\n\n\u003cli\u003eDo Not attach to bumper, trailer hitch ball or sharp edged tow point\u003c\/li\u003e\n\n\u003cli\u003eLoop Gator-Jaw® PRO eye back over knot and pull to tighten\u003c\/li\u003e\n\n\u003cli\u003ePull as normal. Gator-Jaw® PRO shackles are designed to take the load without stretching\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCare \u0026amp; Maintenance:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eThe Gator-Jaw® PRO shackle by Bubba Rope can be washed off with water and air dried. While Gator-Jaw® fibers are stronger than steel they are susceptible to wear and cutting. Always inspect shackle before use for excess wear, cutting, or worn and frayed areas.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Bubba Rope","offers":[{"title":"Default Title","offer_id":45075130417309,"sku":"176745PRO","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198721281.jpg?v=1713412117"},{"product_id":"bubba-rope-7-8-blue-20-foot-power-stretch-recovery-rope-28600-pound-breaking-strength-176660blg","title":"Bubba Rope 7\/8\" Blue 20 Foot Power Stretch Recovery Rope 28,600 Pound Breaking Strength","description":"\u003cp\u003e\u003cstrong\u003eBubba Rope 7\/8\" Blue 20 Foot Power Stretch Recovery Rope 28,600 Pound Breaking Strength\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e7\/8\" x 20'\u003c\/strong\u003e — This is the same great offroad Power Stretch™ recovery rope as the original but only a few feet shorter. With a breaking strength of 28,600 pounds, this recovery rope is safer and more reliable than other so-called kinetic energy ropes. Ideal for 4x4 trucks, Jeeps and SUVs. Comes with its own mesh duffle bag for easy carrying and storing.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eBubba Rope® is the original tougher, safer, off-road recovery rope, developed through our military contracts for pulling vehicles out of mud, sand or snow. It is the only snatch rope for the 4x4 market with a heavy vinyl polymer coating and Gator-ize® eyes.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e100% double-braided nylon rope Gator-ize® Vinyl Polymer coating\u003c\/li\u003e\n\n\u003cli\u003eThe only rope that uses exact US Military specs for splicing and coatings\u003c\/li\u003e\n\n\u003cli\u003eWater, UV and abrasive resistant\u003c\/li\u003e\n\n\u003cli\u003eHighest breaking strengths available, certified at our factory\u003c\/li\u003e\n\n\u003cli\u003eEach Bubba Rope® recovery rope includes a FREE mesh carrying case\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Length is determined with rope under load.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eBubba Rope® provides superior performance, strength and durability that goes way beyond typical recovery ropes, kinetic energy ropes, snatch straps and chains. It stretches to help get your stuck vehicle moving.\u003c\/p\u003e","brand":"Bubba Rope","offers":[{"title":"Default Title","offer_id":45075130450077,"sku":"176660BLG","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198721284.jpg?v=1713412119"},{"product_id":"bubba-rope-7-8-red-30-foot-power-stretch-recovery-rope-28600-pound-breaking-strength-176680rdg","title":"Bubba Rope 7\/8\" Red 30 Foot Power Stretch Recovery Rope 28,600 Pound Breaking Strength","description":"\u003cp\u003e\u003cstrong\u003eBubba Rope 7\/8\" Red 30 Foot Power Stretch Recovery Rope 28,600 Pound Breaking Strength\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e7\/8\" x 30'\u003c\/strong\u003e — the original strap buster! Use this off-road recovery rope for 4x4 trucks, Jeeps, and SUVs. Made from the highest quality nylon, this powerful rope is the best choice for safe recovery and towing, with a breaking strength of 28,600 pounds.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eBubba Rope® is the original tougher, safer, off-road recovery rope, developed through our military contracts for pulling vehicles out of mud, sand or snow. It is the only snatch rope for the 4x4 market with a heavy vinyl polymer coating and Gator-ize® eyes.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e100% double-braided nylon rope Gator-ize® Vinyl Polymer coating\u003c\/li\u003e\n\n\u003cli\u003eThe only rope that uses exact US Military specs for splicing and coatings\u003c\/li\u003e\n\n\u003cli\u003eWater, UV and abrasive resistant\u003c\/li\u003e\n\n\u003cli\u003eHighest breaking strengths available, certified at our factory\u003c\/li\u003e\n\n\u003cli\u003eEach Bubba Rope® recovery rope includes a FREE mesh carrying case\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Length is determined with rope under load.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eBubba Rope® provides superior performance, strength and durability that goes way beyond typical recovery ropes, kinetic energy ropes, snatch straps and chains. It stretches to help get your stuck vehicle moving.\u003c\/p\u003e","brand":"Bubba Rope","offers":[{"title":"Default Title","offer_id":45075130482845,"sku":"176680RDG","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198721287.jpg?v=1713412121"},{"product_id":"bubba-rope-7-8-black-20-foot-power-stretch-recovery-rope-28600-pound-breaking-strength-176660bkg","title":"Bubba Rope 7\/8\" Black 20 Foot Power Stretch Recovery Rope 28,600 Pound Breaking Strength","description":"\u003cp\u003e\u003cstrong\u003eBubba Rope 7\/8\" Black 20 Foot Power Stretch Recovery Rope 28,600 Pound Breaking Strength\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e7\/8\" x 20'\u003c\/strong\u003e — This is the same great offroad Power Stretch™ recovery rope as the original but only a few feet shorter. With a breaking strength of 28,600 pounds, this recovery rope is safer and more reliable than other so-called kinetic energy ropes. Ideal for 4x4 trucks, Jeeps and SUVs. Comes with its own mesh duffle bag for easy carrying and storing.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eBubba Rope® is the original tougher, safer, off-road recovery rope, developed through our military contracts for pulling vehicles out of mud, sand or snow. It is the only snatch rope for the 4x4 market with a heavy vinyl polymer coating and Gator-ize® eyes.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e100% double-braided nylon rope Gator-ize® Vinyl Polymer coating\u003c\/li\u003e\n\n\u003cli\u003eThe only rope that uses exact US Military specs for splicing and coatings\u003c\/li\u003e\n\n\u003cli\u003eWater, UV and abrasive resistant\u003c\/li\u003e\n\n\u003cli\u003eHighest breaking strengths available, certified at our factory\u003c\/li\u003e\n\n\u003cli\u003eEach Bubba Rope® recovery rope includes a FREE mesh carrying case\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Length is determined with rope under load.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eBubba Rope® provides superior performance, strength and durability that goes way beyond typical recovery ropes, kinetic energy ropes, snatch straps and chains. It stretches to help get your stuck vehicle moving.\u003c\/p\u003e","brand":"Bubba Rope","offers":[{"title":"Default Title","offer_id":45075131203741,"sku":"176660BKG","price":215.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198721290.jpg?v=1713412127"},{"product_id":"bubba-rope-3-4-renegade-20-foot-power-stretch-recovery-rope-19000-pound-breaking-strength-176655bkg","title":"Bubba Rope 3\/4\" Renegade 20 Foot Power Stretch Recovery Rope 19,000 Pound Breaking Strength","description":"\u003cp\u003e\u003cstrong\u003eBubba Rope 3\/4\" Renegade 20 Foot Power Stretch Recovery Rope 19,000 Pound Breaking Strength\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e3\/4\" x 20'\u003c\/strong\u003e — Meet the new generation of Power Stretch™ recovery rope in a compact size. With 100% more stretching ability and more pulling power than a flat web strap, Renegade is the perfect tool for safely snatching Jeeps and light trucks from mud, sand or snow. We even made it Military Camo green to match the military specs that this rope was derived from. Mesh duffel bag and camo Velcro wrap included.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eBubba Rope® is the original tougher, safer, off-road recovery rope, developed through our military contracts for pulling vehicles out of mud, sand or snow. It is the only snatch rope for the 4x4 market with a heavy vinyl polymer coating and Gator-ize® eyes.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e100% double-braided nylon rope Gator-ize® Vinyl Polymer coating\u003c\/li\u003e\n\n\u003cli\u003eThe only rope that uses exact US Military specs for splicing and coatings\u003c\/li\u003e\n\n\u003cli\u003eWater, UV and abrasive resistant\u003c\/li\u003e\n\n\u003cli\u003eHighest breaking strengths available, certified at our factory\u003c\/li\u003e\n\n\u003cli\u003eEach Bubba Rope® recovery rope includes a FREE mesh carrying case\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Length is determined with rope under load.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eBubba Rope® provides superior performance, strength and durability that goes way beyond typical recovery ropes, kinetic energy ropes, snatch straps and chains. It stretches to help get your stuck vehicle moving.\u003c\/p\u003e","brand":"Bubba Rope","offers":[{"title":"Default Title","offer_id":45075131236509,"sku":"176655BKG","price":155.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198721296.jpg?v=1713412127"},{"product_id":"bubba-rope-1-1-4-big-bubba-30-foot-power-stretch-recovery-rope-52300-pound-breaking-strength","title":"Bubba Rope 1-1\/4\" Big Bubba 30 Foot Power Stretch Recovery Rope 52,300 Pound Breaking Strength","description":"\u003cp\u003e\u003cstrong\u003eBubba Rope 1-1\/4\" Big Bubba 30 Foot Power Stretch Recovery Rope 52,300 Pound Breaking Strength\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e1-1\/4\" x 30'\u003c\/strong\u003e — This offroad recovery rope is custom made for mud boggin’. Great for full-size trucks and large SUVs, this monster snatch rope features a breaking strength of over 52,300 pounds, making it the safest of its kind!\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eBubba Rope® is the original tougher, safer, off-road recovery rope, developed through our military contracts for pulling vehicles out of mud, sand or snow. It is the only snatch rope for the 4x4 market with a heavy vinyl polymer coating and Gator-ize® eyes.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e100% double-braided nylon rope Gator-ize® Vinyl Polymer coating\u003c\/li\u003e\n\n\u003cli\u003eThe only rope that uses exact US Military specs for splicing and coatings\u003c\/li\u003e\n\n\u003cli\u003eWater, UV and abrasive resistant\u003c\/li\u003e\n\n\u003cli\u003eHighest breaking strengths available, certified at our factory\u003c\/li\u003e\n\n\u003cli\u003eEach Bubba Rope® recovery rope includes a FREE mesh carrying case\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Length is determined with rope under load.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eBubba Rope® provides superior performance, strength and durability that goes way beyond typical recovery ropes, kinetic energy ropes, snatch straps and chains. It stretches to help get your stuck vehicle moving.\u003c\/p\u003e","brand":"Bubba Rope","offers":[{"title":"Default Title","offer_id":45075131269277,"sku":"176720ORG","price":425.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198721301.jpg?v=1713412127"},{"product_id":"bubba-rope-10-foot-orange-tree-hugger-strap-47000-pound-breaking-strength-176000or","title":"Bubba Rope 10 Foot Orange Tree Hugger Strap 47,000 Pound Breaking Strength","description":"\u003cp\u003e\u003cstrong\u003eBubba Rope 10 Foot Orange Tree Hugger Strap 47,000 Pound Breaking Strength\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThe 10-foot Tree Hugger™ is a perfect way to safely winch yourself out of some difficult situations while still managing to leave your surroundings green and un-scarred. The Tree Hugger™ is made from 3 inch wide 100% polyester webbing that can wrap around a tree like a soft cuddle keeping your winch cable from girdling the bark off your tree buddy’s trunk. We also added a tuff Cordura covering over the synthetic webbing for added web protection and reduced eyelets for easily attaching a joining shackle.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eEven if you’re not a granola-eating, herbal-tea drinking type of Bubba or Bubbette, we still think it’s a pretty darn good idea to respect ol’ Mother Nature. Especially when you’re crashing through the country side in an awesome man-made four wheeling mechanical off-roading fun machine. Which is why we designed The Tree Hugger™, a perfect way to safely winch yourself out of some difficult situations while still managing to leave your surroundings green and un-scarred. The Tree Hugger™ is made from 3 inch wide 100% polyester webbing that can wrap around a tree like a soft cuddle keeping your winch cable from girdling the bark off your tree buddy’s trunk. We also added a tuff Cordura covering over the synthetic webbing for added web protection and reduced eyelets for easily attaching a joining shackle.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eWe made The Tree Hugger™ super strong with the breaking strength of 47,000 lbs when wrapped around a tree or some other stationary object. That’s more than twice the weight of a one ton pick-me-up truck! In fact, everything about The Tree Hugger™ is pretty cool right down to the neon orange coloring. Kinda makes us think of cousin Merle who went out west in his psychedelic painted 4x4 back in 1968.\u003c\/p\u003e","brand":"Bubba Rope","offers":[{"title":"Default Title","offer_id":45075131302045,"sku":"176000OR","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198721303.jpg?v=1713412129"},{"product_id":"bubba-rope-3-8-nexgen-gator-jaw-synthetic-shackle-47000-pound-breaking-strength-176746nggb","title":"Bubba Rope 3\/8\" Nexgen Gator Jaw Synthetic Shackle 47,000 Pound Breaking Strength","description":"\u003cp\u003e\u003cstrong\u003eBubba Rope 3\/8\" Nexgen Gator Jaw Synthetic Shackle 47,000 Pound Breaking Strength\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThe NexGen PRO Gator-Jaw® synthetic shackle is lightest and strongest 3\/8\" diameter synthetic shackle ever made. Weighing only 6.5 ounces it has a rated breaking strength of 47,000 lbs. The unique design has eliminated all rope-weakening-splices found in other soft shackles. The locking loop incorporates a flexible tough epoxy rubber slider that slips over a patented designed knot making a strong closed connector. The new slider is made from tough rubber epoxy giving it the strength and stretch to hold up to the wear and tear of off-road recovery. All Gator-Jaw synthetic shackles are made from HMPE synthetic fibers and contain no metal, so they won’t rust and are so light they float.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eBreaking strength 47,000 lbs.\u003c\/li\u003e\n\n\u003cli\u003e3\/8” diameter 12 strand High Modulus Polyethylene (HMPE) rope\u003c\/li\u003e\n\n\u003cli\u003e6.5” bow width\u003c\/li\u003e\n\n\u003cli\u003eVinyl coated for UV and fiber locking protection\u003c\/li\u003e\n\n\u003cli\u003eSlider made from two-part flexible high-performance urethane elastomer\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuggested Application:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eJeeps \u0026amp; Trucks weighing 4k – 8k lbs.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/www.bubbarope.com\/media\/catalog\/product\/g\/a\/gator-jaw-animated-web_1.gif\" alt=\"\" width=\"668\" height=\"668\"\u003e\u003c\/p\u003e","brand":"Bubba Rope","offers":[{"title":"Default Title","offer_id":45075132317853,"sku":"176746NGGB","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198721306.jpg?v=1713412132"},{"product_id":"superwinch-atv-utv-utility-winch-2000-lb-capacity-with-49-steel-cable-1120210","title":"Superwinch ATV\/UTV Utility Winch 2,000 LB Capacity With 49' Steel Cable","description":"\u003cp\u003e\u003cstrong\u003eSuperwinch ATV\/UTV Utility Winch 2,000 LB Capacity With 49' Steel Cable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Superwinch LT2000 Utility Winch is your best choice for compact, quiet, all-purpose winching – ideal for those needing a smaller, durable tool with brand-name reliability and function. This utility version winch is driven by a durable, but low Amp, permanent magnet 1.0 hp motor which is controlled by an included wired handheld remote containing two sets of color-coated electrical leads and a circuit breaker component and wire. One set of paired leads attaches to the winch and the other to the DC battery power source, with the circuit breaker component and wire added to the positive connection to the battery. Making these connections is easy, quick and ensures safe operation of the 49 feet of 5\/32\" rope wire included with the winch. The Superwinch LT2000 Utility Winch also features a pull and turn freespooling clutch, allowing for manual extending of wire rope, and a heavy duty latched hook.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFeatures a powerful, yet efficient 1.0 hp (0.8kW) motor with a 2,000 lb pull rating and circuit breaker protection\u003c\/li\u003e\n\u003cli\u003eUtilizes 49 feet of 5\/32-inch wire rope (3.9mm x 15m) with a stainless thimble, as well as a quiet, efficient, differential planetary gear box, and pull and turn freespooling clutch\u003c\/li\u003e\n\u003cli\u003eEasily upgraded to a fully functional ATV handlebar unit with minimal additional accessories (Upgrade Kit sold separately)\u003c\/li\u003e\n\u003cli\u003eIncludes a toggle switch for better and safer performance\u003c\/li\u003e\n\u003cli\u003eIncludes a one-year warranty for defects in materials and workmanship as well as electrical components\u003c\/li\u003e\n\u003cli\u003eLow Amp, 12V DC, permanent magnet 1.0 hp (0.8kW) motor, with 2,000 LB line pull rating.\u003c\/li\u003e\n\u003cli\u003ePowers load in and out.\u003c\/li\u003e\n\u003cli\u003eGear ratio 153:1.\u003c\/li\u003e\n\u003cli\u003ePull and turn freespooling clutch.\u003c\/li\u003e\n\u003cli\u003eCircuit breaker protected.\u003c\/li\u003e\n\u003cli\u003eHeavy duty latched hook with rope thimble.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1-Superwinch LT2000 Utility Winch with 49 feet of 5\/32\" wire rope with rope thimble\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1-circuit breaker component and wire\u003c\/li\u003e\n\u003cli\u003e1-tree strap\u003c\/li\u003e\n\u003cli\u003eM8 x 1.25 x 30mm mounting bolts (for use with a 1\/4\" (6.3mm) thick mounting plate, sold separately)\u003c\/li\u003e\n\u003cli\u003e1-users manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"specBlock\"\u003e\n\u003cdiv\u003e\n\u003ctable cellpadding=\"0\" cellspacing=\"0\" width=\"561\" border=\"1\" style=\"height: 416px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_odd\"\u003eRated Line Pull\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_odd\"\u003e2,000 lbs (907 kgs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_even\"\u003eMotor\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_even\"\u003e1.0 HP (.75 kw) Permanent Magnet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_odd\"\u003eGearing\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_odd\"\u003e1-Stage Planetary\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_even\"\u003eGear Ratio\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_even\"\u003e153:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_odd\"\u003eSolenoid\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_odd\"\u003eCircuit Breaker Protected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_even\"\u003eClutch\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_even\"\u003eFree-Spooling, Pull and Turn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_odd\"\u003eBrake\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_odd\"\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_even\"\u003eRope\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_even\"\u003eWire Rope 5\/32\" x 49' (3.9mm x 15m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_odd\"\u003eHook\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_odd\"\u003eLatched with Rope Thimble, Permanent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_even\"\u003eFairlead\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_even\"\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_odd\"\u003eRemote\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_odd\"\u003e8' Hand Held\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_even\"\u003eDimensions\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_even\"\u003e11.0” L x 4.1” D x 4.1” H (285mm L x 105mm D x 105mm H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_odd\"\u003eDrum Diameter\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_odd\"\u003eDrum Diameter: 1.25” (31.8mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_even\"\u003eDrum Length\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_even\"\u003eDrum Length: 2.83” (72.0mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_odd\"\u003eMounting Bolt Pattern\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_odd\"\u003e2 Hole, 3.15\" (80mm) on center\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_even\"\u003eInstalled Weight\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_even\"\u003e12 lbs (5.4 kgs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_odd\"\u003eShipping Weight\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_odd\"\u003e17.4 lbs (7.89 kgs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_even\"\u003eWarranty\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_even\"\u003eOne-Year Limited Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_odd\"\u003eUPC\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_odd\"\u003e0 22705 00264 6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_even\"\u003eLine Pull: 0 lbs\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_even\"\u003e10 Amps Motor Draw \/ 10.0 FPM (3.0 MPM) Line Speed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" style=\"width: 137px;\" class=\"spec_name_odd\"\u003eLine Pull: 2,000 lbs\u003c\/td\u003e\n\u003ctd valign=\"top\" style=\"width: 418px;\" class=\"spec_description_odd\"\u003e100 Amps Motor Draw \/ 2.5 FPM (0.8 MPM) Line Speed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Superwinch","offers":[{"title":"Default Title","offer_id":45075229606045,"sku":"1120210","price":185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/cae7f82f559b3eed6e01e5bf4e4bc9fb.jpg?v=1737734045"},{"product_id":"bw-10000lbs-black-tow-stow-3-ball-trailer-hitch-with-5-drop-2-receiver","title":"B\u0026W 10,000LBS Black Tow \u0026 Stow 3 Ball Trailer Hitch With 5\" Drop - 2\" Receiver","description":"\u003cp\u003e\u003cstrong\u003eB\u0026amp;W 10,000LBS Black Tow \u0026amp; Stow 3 Ball Trailer Hitch With 5\" Drop - 2\" Receiver \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003csection class=\"cmp-product-section cmp-product-description open animate--fade-in\" data-scroll=\"\"\u003e\n\n\u003cdiv class=\"cmp-product-section__inner\"\u003e\n\n\u003cdiv class=\"cmp-product-description__content\"\u003e\n\n\u003cp\u003eB\u0026amp;W Tow and Stow Magnum Receiver Hitch Ball Mounts are available in a variety of formats and configurations that either adjust to multiple heights, or eliminate the need for multiple ball mounts, by having different sizes in one unit. These ball mounts also stow underneath when not in use, protecting the hitch from shins, garage doors and other safety issues. Powder-coating over a zinc phosphate base ensures ultimate durability and long lasting good looks.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan data-ccp-props=\"{\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003eTow \u0026amp; Stow\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003e8\" Model\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003e5\" Drop\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003e5.5\" Rise\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003eTri-Ball\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003eAdjustable in 1\" increments. \u003c\/span\u003e\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFits any Standard 2\" Receiver\u003c\/li\u003e\n\n\u003cli\u003e1-7\/8\" Chrome Ball\u003c\/li\u003e\n\n\u003cli\u003e2\" Chrome Ball \u003c\/li\u003e\n\n\u003cli\u003e2-5\/16\" Chrome Ball \u003c\/li\u003e\n\n\u003cli\u003eClass IV\u003c\/li\u003e\n\n\u003cli\u003eGross Trailer Weight: 10,000 LBS\u003c\/li\u003e\n\n\u003cli\u003eTongue Weight: 1,000 LBS\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/gmHU1EzpFtI\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003c\/section\u003e","brand":"B\u0026W Trailer Hitches","offers":[{"title":"Default Title","offer_id":45075377127581,"sku":"TS10048B","price":279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198728374.png?v=1713414385"},{"product_id":"bw-10000lbs-black-tow-stow-2-ball-trailer-hitch-with-5-drop-2-receiver","title":"B\u0026W 10,000LBS Black Tow \u0026 Stow 2 Ball Trailer Hitch With 5\" Drop - 2\" Receiver","description":"\u003cp\u003e\u003cstrong\u003eB\u0026amp;W 10,000LBS Black Tow \u0026amp; Stow 2 Ball Trailer Hitch With 5\" Drop - 2\" Receiver \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003csection class=\"cmp-product-section cmp-product-description open animate--fade-in\" data-scroll=\"\"\u003e\n\n\u003cdiv class=\"cmp-product-section__inner\"\u003e\n\n\u003cdiv class=\"cmp-product-description__content\"\u003e\n\n\u003cp\u003eB\u0026amp;W Tow and Stow Magnum Receiver Hitch Ball Mounts are available in a variety of formats and configurations that either adjust to multiple heights, or eliminate the need for multiple ball mounts, by having different sizes in one unit. These ball mounts also stow underneath when not in use, protecting the hitch from shins, garage doors and other safety issues. Powder-coating over a zinc phosphate base ensures ultimate durability and long lasting good looks.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan data-ccp-props=\"{\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003eTow \u0026amp; Stow\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003e5\" Drop\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003e5.5\" Rise\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003eTwo-Ball\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003eAdjustable in 1\" increments. \u003c\/span\u003e\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFits any Standard 2\" Receiver\u003c\/li\u003e\n\n\u003cli\u003e2\" Chrome Ball \u003c\/li\u003e\n\n\u003cli\u003e2-5\/16\" Chrome Ball \u003c\/li\u003e\n\n\u003cli\u003eClass IV\u003c\/li\u003e\n\n\u003cli\u003eGross Trailer Weight: 10,000 LBS\u003c\/li\u003e\n\n\u003cli\u003eTongue Weight: 1,000 LBS\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/gmHU1EzpFtI\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003c\/section\u003e","brand":"B\u0026W Trailer Hitches","offers":[{"title":"Default Title","offer_id":45075377586333,"sku":"TS10037B","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198728376.png?v=1713414389"},{"product_id":"bw-16000lbs-black-tow-stow-pintle-2-5-16-ball-trailer-hitch-8-5-drop-2-5-receiver","title":"B\u0026W 16,000LBS Black Tow \u0026 Stow Pintle 2-5\/16\" Ball Trailer Hitch 8.5\" Drop - 2.5\" Receiver","description":"\u003cp\u003e\u003cstrong\u003eB\u0026amp;W 16,000LBS Black Tow \u0026amp; Stow Pintle Trailer Hitch 8.5\" Drop - 2.5\" Receiver \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003csection class=\"cmp-product-section cmp-product-description open animate--fade-in\" data-scroll=\"\"\u003e\n\n\u003cdiv class=\"cmp-product-section__inner\"\u003e\n\n\u003cdiv class=\"cmp-product-description__content\"\u003e\n\n\u003cp\u003eStows under the vehicle when not in use. The Pintle Hitch offers some of the same great features as the Tow \u0026amp; Stow Receiver Hitch. B\u0026amp;W Trailer Hitches products are designed using advanced manufacturing techniques to meet and exceed your highest expectations. Crafted from sturdy materials with the greatest care and precision they ensure a high level of quality you expect from B\u0026amp;W Trailer Hitches. Manufactured in a state-of-the-art facility by expert professionals using the technologically advanced equipment B\u0026amp;W products are durable and strong. When it comes to uncompromising reliability, you can rely on B\u0026amp;W Trailer Hitches.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cspan data-ccp-props=\"{\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003eTow \u0026amp; Stow\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003ePintle or Ball Mount\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003e8.5\" Drop\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003e4.5\" Rise\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003e1.25\" Hole Diameter\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan data-ccp-props=\"{\"\u003eAdjustable in 1\" increments. \u003c\/span\u003e\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFits any Standard 2.5\" Receiver\u003c\/li\u003e\n\n\u003cli\u003e2-5\/16\" Chrome Ball \u003c\/li\u003e\n\n\u003cli\u003eClass V\u003c\/li\u003e\n\n\u003cli\u003eGross Trailer Weight: 16,000 LBS (Pintle)\u003c\/li\u003e\n\n\u003cli\u003eGross Trailer Weight: 10,000 LBS (Ball Mount)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003c\/section\u003e\n\n\u003csection class=\"cmp-product-section cmp-product-description open animate--fade-in\" data-scroll=\"\"\u003e\n\n\u003cdiv class=\"cmp-product-section__inner\"\u003e\n\n\u003cdiv class=\"cmp-product-description__content\"\u003e \u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003c\/section\u003e","brand":"B\u0026W Trailer Hitches","offers":[{"title":"Default Title","offer_id":45075377619101,"sku":"TS20056","price":389.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198728378.jpg?v=1713414389"},{"product_id":"rockjock-spare-tire-mount-delete-for-wrangler-jl-ce-9818tg","title":"RockJock Spare Tire Mount Delete For Wrangler JL","description":"\u003cp\u003eRockJock's spare tire mount delete and vent cover is fabricated and formed from laser cut .125\" aluminum, powdercoated semi-gloss black and includes all mounting hardware. Additonally, this kit includes a mount that allows you to reinstall the factory back up camera and 3rd. brake light!\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2-year warranty.\u003c\/li\u003e\n\n\u003cli\u003eLaser cut .125\" aluminum\u003c\/li\u003e\n\n\u003cli\u003eIncludes all mounting hardware\u003c\/li\u003e\n\n\u003cli\u003eSemi-Gloss Black Powder Coat Finish\u003c\/li\u003e\n\n\u003cli\u003eNo Modifications needed for installation \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2018+ Jeep Wrangler JL All Models \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eProvisions for mounting license plate and a license plate light are not included\u003c\/li\u003e\n\n\u003cli\u003e3rd. brake light, back up camera and license plate frame not included\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"RockJock","offers":[{"title":"Default Title","offer_id":45075460063389,"sku":"CE-9818TG","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198740819.jpg?v=1713415823"},{"product_id":"rockjock-spare-tire-mount-delete-for-wrangler-jk","title":"RockJock Spare Tire Mount Delete For Wrangler JK","description":"\u003cp\u003eRockJock's JK spare tire mount delete and vent cover is fabricated and formed from laser cut .125\" aluminum, powdercoated semi-gloss black and includes all mounting hardware. Additonally, license plate and 3rd. brake light may be mounted onto this cover.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2-year warranty.\u003c\/li\u003e\n\n\u003cli\u003eLaser Cut .125\" Aluminum\u003c\/li\u003e\n\n\u003cli\u003ePowdercoated semi-gloss black\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2007-2018 Jeep Wrangler JK All Models \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eProvisions for mounting license plate and 3rd. brake light not included.\u003c\/li\u003e\n\n\u003cli\u003e3rd. brake light and license plate frame not included\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"RockJock","offers":[{"title":"Default Title","offer_id":45075462095005,"sku":"CE-9807TG","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198740902.jpg?v=1713415854"},{"product_id":"oem-ford-safari-bar-kit-for-2021-bronco-with-modular-front-bumper-m2dz-17d942-aa","title":"OEM Ford Safari Bar Kit For 2021+ Bronco With Modular Front Bumper","description":"\u003cp\u003eProtect the front of your Bronco with this rugged Safari Bar. Constructed from cold rolled steel, this bar bolts directly to the optional Modular Front Bumper.  When your next adventure takes you off the beaten path and into the brush, help protect the front of your Bronco with this rugged Safari Bar.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eConstructed of cold rolled steel\u003c\/li\u003e\n\n\u003cli\u003e2-inch diameter, black powder coated tube\u003c\/li\u003e\n\n\u003cli\u003eCorrosion-resistant mounting hardware included\u003c\/li\u003e\n\n\u003cli\u003eBolts directly to the optional Modular Front Bumper\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2021+ Ford Bronco\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eDoes NOT fit Bronco Sport\u003c\/li\u003e\n\n\u003cli\u003eOnly Fits models with Modular Front Bumper\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"OEM Ford","offers":[{"title":"Default Title","offer_id":45075536216221,"sku":"M2DZ-17D942-AA","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198744202.jpg?v=1713417041"},{"product_id":"ford-performance-5pc-gloss-black-aluminum-bead-lock-trim-kit-for-2021-bronco-m-1021k-blb","title":"Ford Performance 5pc Gloss Black Aluminum Bead Lock Trim Kit For 2021+ Bronco","description":"\u003cp\u003eGive your Bronco better performance off-road and on trails with this bead-lock ring kit. Designed to work with the 17\" bead-lock capable wheels from Ford (option 64W), this kit comes with everything you need to get your wheels ready for extreme terrain.  The bead-lock ring clamps the bead of the tire and prevents it from slipping off the wheel at low tire pressures. This lets you air down your tires for better traction in extreme terrain. \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eEasy installation\u003c\/li\u003e\n\n\u003cli\u003eSet includes five gloss black trim rings\u003c\/li\u003e\n\n\u003cli\u003eFits 2021 Bronco with Factory Bead lock capable wheels\u003c\/li\u003e\n\n\u003cli\u003eBronco Bead-Lock Trim Rings provide an easy way to customize your Bronco adding an unique and awesome look! \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2021 Ford Bronco W\/ Factory Bead Lock Wheels\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFits all Sasquatch Package (675) equipped vehicles\u003c\/li\u003e\n\n\u003cli\u003eAlso fits optional Bead lock Capable wheel (64W) found on on Badlands trim\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"OEM Ford","offers":[{"title":"Default Title","offer_id":45075547619485,"sku":"M-1021K-BLB","price":579.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198744626.jpg?v=1713417274"},{"product_id":"bulletproof-hitches-medium-duty-4-drop-rise-2-shank-md204","title":"Bulletproof Hitches Medium Duty 4\" Drop\/Rise 2\" Shank","description":"\u003cp\u003eOur 2.0\" Medium Duty 4\" Drop or Rise Hitch is unlike any of our competitors' products. We worked hard to create 1 amazing Hitch that does the work of 10.  Our hitches are extensively tested and exceed SAE-J684 testing requirements. They are built to such a high standard that we have never had a single failure. Each adjustable mount includes a 2-ball platform, 2\" \u0026amp; 2-5\/16\" Dual Ball, which fits in the adjustable channel of the hitch. The 2 hitch balls are welded together onto the solid steel platform for maximum strength and stability.\u003c\/p\u003e\n\n\u003cp\u003eThe Medium Duty Hitch Shank is boxed steel and has rounded edges to easily go into \u0026amp; out of your hitch receiver. It also comes with two pin holes on the shank for more adjustment options.  All BulletProof Hitches™ feature a durable corrosion-resistant powder coat. This process starts with an aggressive sandblast to remove all impurities and create a clean surface for the powder coat. After the sandblast process, the hitch moves through a 5-stage pretreatment wash to remove any oil or residue. The metal itself is then sealed to eliminate the possibility of corrosion. The final step is an application of our signature black textured powder coat, which is applied by a Fanuc robot to ensure consistent thickness across the hitch.\u003c\/p\u003e\n\n\u003cp\u003eThe components of the BulletProof Hitch™ are machined in house on our state-of-the-art Haas CNC machines. These CNC machines use Renishaw probes, allowing us to manufacture all of our parts to an extremely tight tolerance. This primarily ensures that each hitch and ball combination fit together without slop or excess movement when attached to your vehicle.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMADE IN THE USA!\u003c\/li\u003e\n\n\u003cli\u003eBox Steel Shank\u003c\/li\u003e\n\n\u003cli\u003e4\" Rise\/Drop Hitch\u003c\/li\u003e\n\n\u003cli\u003e2\" Ball: 10,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e2-5\/16\" Ball: 14,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e14,000 lb Max Towing Capacity\u003c\/li\u003e\n\n\u003cli\u003e2,000 lb Tongue Weight Capacity\u003c\/li\u003e\n\n\u003cli\u003eSignature Black Textured Powder Coat\u003c\/li\u003e\n\n\u003cli\u003eExceed SAE-J684 testing requirements\u003c\/li\u003e\n\n\u003cli\u003eRide Heights That Are Easily Adjustable \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUniversal \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMedium Duty Hitches Are Not Compatible With Pintle Attachment\u003c\/li\u003e\n\n\u003cli\u003eThis 2.0\" Medium Duty hitch has a max towing capacity of 14,000 lbs and a tongue weight capacity of 2,000 lbs in both the drop \u0026amp; rise positions.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"BulletProof Hitches","offers":[{"title":"Default Title","offer_id":45075560104093,"sku":"MD204","price":239.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198744955.jpg?v=1713417441"},{"product_id":"bulletproof-hitches-medium-duty-2-drop-rise-2-shank-md202","title":"Bulletproof Hitches Medium Duty 2\" Drop\/Rise 2\" Shank","description":"\u003cp\u003eBulletproof Hitches 2.0\" Medium Duty 2\" Drop or Rise Hitch is unlike any of our competitors' products.  This is the last hitch you will EVER need! We worked hard to create 1 amazing Hitch that does the work of 10.  Our hitches are extensively tested and exceed SAE-J684 testing requirements. They are built to such a high standard that we have never had a single failure.   Each adjustable mount includes a 2-ball platform, 2\" \u0026amp; 2-5\/16\" Dual Ball, which fits in the adjustable channel of the hitch. The 2 hitch balls are welded together onto the solid steel platform for maximum strength and stability.\u003c\/p\u003e\n\n\u003cp\u003eThe Medium Duty Hitch Shank is boxed steel and has rounded edges to easily go into \u0026amp; out of your hitch receiver. It also comes with two pin holes on the shank for more adjustment options.  All BulletProof Hitches™ feature a durable corrosion-resistant powder coat. This process starts with an aggressive sandblast to remove all impurities and create a clean surface for the powder coat. After the sandblast process, the hitch moves through a 5-stage pretreatment wash to remove any oil or residue. The metal itself is then sealed to eliminate the possibility of corrosion. The final step is an application of our signature black textured powder coat, which is applied by a Fanuc robot to ensure consistent thickness across the hitch.\u003c\/p\u003e\n\n\u003cp\u003eThe components of the BulletProof Hitch™ are machined in house on our state-of-the-art Haas CNC machines. These CNC machines use Renishaw probes, allowing us to manufacture all of our parts to an extremely tight tolerance. This primarily ensures that each hitch and ball combination fit together without slop or excess movement when attached to your vehicle.\u003c\/p\u003e\n\n\u003cp\u003eAll of our hitches can be used in the drop or rise position and maintain the same weight capacity in either position.  This 2.0\" Medium Duty 2\" drop\/rise hitch has a max towing capacity of 14,000 lbs and a tongue weight capacity of 2,000 lbs in both the drop \u0026amp; rise positions.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMADE IN THE USA!\u003c\/li\u003e\n\n\u003cli\u003eBox Steel Shank\u003c\/li\u003e\n\n\u003cli\u003e2\" Ball: 10,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e2-5\/16\" Ball: 14,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e14,000 lb Max Towing Capacity\u003c\/li\u003e\n\n\u003cli\u003e2,000 lb Tongue Weight Capacity\u003c\/li\u003e\n\n\u003cli\u003eSignature Black Textured Powder Coat\u003c\/li\u003e\n\n\u003cli\u003eExceed SAE-J684 testing requirements\u003c\/li\u003e\n\n\u003cli\u003eRide Heights That Are Easily Adjustable \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUniversal \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMedium Duty Hitches Are Not Compatible With Pintle Attachment\u003c\/li\u003e\n\n\u003cli\u003eThis 2.0\" Medium Duty 2\" drop\/rise hitch has a max towing capacity of 14,000 lbs and a tongue weight capacity of 2,000 lbs in both the drop \u0026amp; rise positions.\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"BulletProof Hitches","offers":[{"title":"Default Title","offer_id":45075562102941,"sku":"MD202","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198744923.jpg?v=1713417445"},{"product_id":"bulletproof-hitches-medium-duty-6-drop-rise-2-shank-md206","title":"Bulletproof Hitches Medium Duty 6\" Drop\/Rise 2\" Shank","description":"\u003cp\u003eBulletProof Hitches 2.0\" Medium Duty 6\" Drop or Rise Hitch is unlike any of our competitors' products. We worked hard to create 1 amazing Hitch that does the work of 10.  Our hitches are extensively tested and exceed SAE-J684 testing requirements. They are built to such a high standard that we have never had a single failure. Each adjustable mount includes a 2-ball platform, 2\" \u0026amp; 2-5\/16\" Dual Ball, which fits in the adjustable channel of the hitch. The 2 hitch balls are welded together onto the solid steel platform for maximum strength and stability.\u003c\/p\u003e\n\n\u003cp\u003eThe Medium Duty Hitch Shank is boxed steel and has rounded edges to easily go into \u0026amp; out of your hitch receiver. It also comes with two pin holes on the shank for more adjustment options.  All BulletProof Hitches™ feature a durable corrosion-resistant powder coat. This process starts with an aggressive sandblast to remove all impurities and create a clean surface for the powder coat. After the sandblast process, the hitch moves through a 5-stage pretreatment wash to remove any oil or residue. The metal itself is then sealed to eliminate the possibility of corrosion. The final step is an application of our signature black textured powder coat, which is applied by a Fanuc robot to ensure consistent thickness across the hitch.\u003c\/p\u003e\n\n\u003cp\u003eThe components of the BulletProof Hitch™ are machined in house on our state-of-the-art Haas CNC machines. These CNC machines use Renishaw probes, allowing us to manufacture all of our parts to an extremely tight tolerance. This primarily ensures that each hitch and ball combination fit together without slop or excess movement when attached to your vehicle.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMADE IN THE USA!\u003c\/li\u003e\n\n\u003cli\u003eBox Steel Shank\u003c\/li\u003e\n\n\u003cli\u003e6\" Rise\/Drop Hitch\u003c\/li\u003e\n\n\u003cli\u003e2\" Ball: 10,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e2-5\/16\" Ball: 14,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e14,000 lb Max Towing Capacity\u003c\/li\u003e\n\n\u003cli\u003e2,000 lb Tongue Weight Capacity\u003c\/li\u003e\n\n\u003cli\u003eSignature Black Textured Powder Coat\u003c\/li\u003e\n\n\u003cli\u003eExceed SAE-J684 testing requirements\u003c\/li\u003e\n\n\u003cli\u003eRide Heights That Are Easily Adjustable \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUniversal \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMedium Duty Hitches Are Not Compatible With Pintle Attachment\u003c\/li\u003e\n\n\u003cli\u003eThis 2.0\" Medium Duty hitch has a max towing capacity of 14,000 lbs and a tongue weight capacity of 2,000 lbs in both the drop \u0026amp; rise positions.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"BulletProof Hitches","offers":[{"title":"Default Title","offer_id":45075570753693,"sku":"MD206","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198744978.png?v=1713417464"},{"product_id":"bulletproof-hitches-2-shank-medium-duty-4-6-offset-hitch-md20offset","title":"Bulletproof Hitches 2\" Shank Medium Duty 4\"\/6\" Offset Hitch","description":"\u003cp\u003eBulletProof Hitches 2.0\" Medium Duty 4\"\/6\" Offset Hitch is unlike any of our competitors' products. We worked hard to create 1 amazing Hitch that does the work of 10.  Our hitches are extensively tested and exceed SAE-J684 testing requirements. They are built to such a high standard that we have never had a single failure. Each adjustable mount includes a 2-ball platform, 2\" \u0026amp; 2-5\/16\" Dual Ball, which fits in the adjustable channel of the hitch. The 2 hitch balls are welded together onto the solid steel platform for maximum strength and stability.\u003c\/p\u003e\n\n\u003cp\u003eThe Medium Duty Hitch Shank is boxed steel and has rounded edges to easily go into \u0026amp; out of your hitch receiver. It also comes with two pin holes on the shank for more adjustment options.  All BulletProof Hitches™ feature a durable corrosion-resistant powder coat. This process starts with an aggressive sandblast to remove all impurities and create a clean surface for the powder coat. After the sandblast process, the hitch moves through a 5-stage pretreatment wash to remove any oil or residue. The metal itself is then sealed to eliminate the possibility of corrosion. The final step is an application of our signature black textured powder coat, which is applied by a Fanuc robot to ensure consistent thickness across the hitch.\u003c\/p\u003e\n\n\u003cp\u003eThe components of the BulletProof Hitch™ are machined in house on our state-of-the-art Haas CNC machines. These CNC machines use Renishaw probes, allowing us to manufacture all of our parts to an extremely tight tolerance. This primarily ensures that each hitch and ball combination fit together without slop or excess movement when attached to your vehicle.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMADE IN THE USA!\u003c\/li\u003e\n\n\u003cli\u003eBox Steel Shank\u003c\/li\u003e\n\n\u003cli\u003e4\" \u0026amp; 6\" Drop\/Rise Offset Hitch\u003c\/li\u003e\n\n\u003cli\u003e2\" Ball: 10,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e2-5\/16\" Ball: 14,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e14,000 lb Max Towing Capacity\u003c\/li\u003e\n\n\u003cli\u003e2,000 lb Tongue Weight Capacity\u003c\/li\u003e\n\n\u003cli\u003eSignature Black Textured Powder Coat\u003c\/li\u003e\n\n\u003cli\u003eExceed SAE-J684 testing requirements\u003c\/li\u003e\n\n\u003cli\u003eRide Heights That Are Easily Adjustable \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUniversal \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMedium Duty Hitches Are Not Compatible With Pintle Attachment\u003c\/li\u003e\n\n\u003cli\u003eThis 2.0\" Medium Duty hitch has a max towing capacity of 14,000 lbs and a tongue weight capacity of 2,000 lbs in both the drop \u0026amp; rise positions.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"BulletProof Hitches","offers":[{"title":"Default Title","offer_id":45075571507357,"sku":"MD20OFFSET","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198744997.jpg?v=1713417466"},{"product_id":"bulletproof-hitches-heavy-duty-2-solid-shank-4-drop-rise-22000-lbs-hitch-hd204-2-2-5-16-ball","title":"BulletProof Hitches Heavy Duty 2\" Solid Shank 4\" Drop\/Rise 22,000 LBS Hitch","description":"\u003cp\u003eBulletProof Hitches 2.0\" Heavy Duty 4\" Drop or Rise Hitch is unlike any of our competitors' products. We worked hard to create 1 amazing Hitch that does the work of 10.  Our hitches are extensively tested and exceed SAE-J684 testing requirements. They are built to such a high standard that we have never had a single failure. Each adjustable mount includes a 2-ball platform, 2\" \u0026amp; 2-5\/16\" Dual Ball, which fits in the adjustable channel of the hitch. The 2 hitch balls are welded together onto the solid steel platform for maximum strength and stability.\u003c\/p\u003e\n\n\u003cp\u003eThe Heavy Duty and Extreme Duty hitch shanks are solid steel all the way through and have chamfered edges so that they can easily slide into \u0026amp; out of your hitch receiver. The Solid Steel Shank also comes with two pin holes on the shank for more adjustment options.  All BulletProof Hitches™ feature a durable corrosion-resistant powder coat. This process starts with an aggressive sandblast to remove all impurities and create a clean surface for the powder coat. After the sandblast process, the hitch moves through a 5-stage pretreatment wash to remove any oil or residue. The metal itself is then sealed to eliminate the possibility of corrosion. The final step is an application of our signature black textured powder coat, which is applied by a Fanuc robot to ensure consistent thickness across the hitch.\u003c\/p\u003e\n\n\u003cp\u003eThe components of the BulletProof Hitch™ are machined in house on our state-of-the-art Haas CNC machines. These CNC machines use Renishaw probes, allowing us to manufacture all of our parts to an extremely tight tolerance. This primarily ensures that each hitch and ball combination fit together without slop or excess movement when attached to your vehicle.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMADE IN THE USA!\u003c\/li\u003e\n\n\u003cli\u003eSolid Steel Shank\u003c\/li\u003e\n\n\u003cli\u003e4\" Drop\/Rise Hitch\u003c\/li\u003e\n\n\u003cli\u003e2\" Ball: 12,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e2-5\/16\" Ball: 22,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e22,000 lb Max Towing Capacity\u003c\/li\u003e\n\n\u003cli\u003e3,000 lb Tongue Weight Capacity\u003c\/li\u003e\n\n\u003cli\u003eSignature Black Textured Powder Coat\u003c\/li\u003e\n\n\u003cli\u003eExceed SAE-J684 testing requirements\u003c\/li\u003e\n\n\u003cli\u003eRide Heights That Are Easily Adjustable \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUniversal \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAll of our hitches can be used in the drop or rise position and maintain the same weight capacity in either position.\u003c\/li\u003e\n\n\u003cli\u003eThis 2.0\" Heavy Duty hitch has a max towing capacity of 22,000 lbs and a tongue weight capacity of 3,000 lbs in both the drop \u0026amp; rise positions.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"BulletProof Hitches","offers":[{"title":"Default Title","offer_id":45075576684701,"sku":"HD204 - 2\" \u0026 2-5\/16\" Ball","price":359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198745035.jpg?v=1713417478"},{"product_id":"bulletproof-hitches-heavy-duty-2-solid-shank-6-drop-rise-22000-lbs-hitch-hd206-2-2-5-16-ball","title":"BulletProof Hitches Heavy Duty 2\" Solid Shank 6\" Drop\/Rise 22,000 LBS Hitch","description":"\u003cp\u003eBulletProof Hitches 2.0\" Heavy Duty 6\" Drop or Rise Hitch is unlike any of our competitors' products. We worked hard to create 1 amazing Hitch that does the work of 10.  Our hitches are extensively tested and exceed SAE-J684 testing requirements. They are built to such a high standard that we have never had a single failure. Each adjustable mount includes a 2-ball platform, 2\" \u0026amp; 2-5\/16\" Dual Ball, which fits in the adjustable channel of the hitch. The 2 hitch balls are welded together onto the solid steel platform for maximum strength and stability.\u003c\/p\u003e\n\n\u003cp\u003eThe Heavy Duty and Extreme Duty hitch shanks are solid steel all the way through and have chamfered edges so that they can easily slide into \u0026amp; out of your hitch receiver. The Solid Steel Shank also comes with two pin holes on the shank for more adjustment options.  All BulletProof Hitches™ feature a durable corrosion-resistant powder coat. This process starts with an aggressive sandblast to remove all impurities and create a clean surface for the powder coat. After the sandblast process, the hitch moves through a 5-stage pretreatment wash to remove any oil or residue. The metal itself is then sealed to eliminate the possibility of corrosion. The final step is an application of our signature black textured powder coat, which is applied by a Fanuc robot to ensure consistent thickness across the hitch.\u003c\/p\u003e\n\n\u003cp\u003eThe components of the BulletProof Hitch™ are machined in house on our state-of-the-art Haas CNC machines. These CNC machines use Renishaw probes, allowing us to manufacture all of our parts to an extremely tight tolerance. This primarily ensures that each hitch and ball combination fit together without slop or excess movement when attached to your vehicle.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMADE IN THE USA!\u003c\/li\u003e\n\n\u003cli\u003eSolid Steel Shank\u003c\/li\u003e\n\n\u003cli\u003e6\" Drop\/Rise Hitch\u003c\/li\u003e\n\n\u003cli\u003e2\" Ball: 12,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e2-5\/16\" Ball: 22,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e22,000 lb Max Towing Capacity\u003c\/li\u003e\n\n\u003cli\u003e3,000 lb Tongue Weight Capacity\u003c\/li\u003e\n\n\u003cli\u003eSignature Black Textured Powder Coat\u003c\/li\u003e\n\n\u003cli\u003eExceed SAE-J684 testing requirements\u003c\/li\u003e\n\n\u003cli\u003eRide Heights That Are Easily Adjustable \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUniversal \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAll of our hitches can be used in the drop or rise position and maintain the same weight capacity in either position.\u003c\/li\u003e\n\n\u003cli\u003eThis 2.0\" Heavy Duty hitch has a max towing capacity of 22,000 lbs and a tongue weight capacity of 3,000 lbs in both the drop \u0026amp; rise positions.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"BulletProof Hitches","offers":[{"title":"Default Title","offer_id":45075580846237,"sku":"HD206 - 2\" \u0026 2-5\/16\" Ball","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198745057.jpg?v=1713417487"},{"product_id":"bulletproof-hitches-heavy-duty-2-solid-shank-8-drop-rise-22000-lbs-hitch-hd208","title":"BulletProof Hitches Heavy Duty 2\" Solid Shank 8\" Drop\/Rise 22,000 LBS Hitch","description":"\u003cp\u003eBulletProof Hitches 2.0\" Heavy Duty 8\" Drop or Rise Hitch is unlike any of our competitors' products. We worked hard to create 1 amazing Hitch that does the work of 10.  Our hitches are extensively tested and exceed SAE-J684 testing requirements. They are built to such a high standard that we have never had a single failure. Each adjustable mount includes a 2-ball platform, 2\" \u0026amp; 2-5\/16\" Dual Ball, which fits in the adjustable channel of the hitch. The 2 hitch balls are welded together onto the solid steel platform for maximum strength and stability.\u003c\/p\u003e\n\n\u003cp\u003eThe Heavy Duty and Extreme Duty hitch shanks are solid steel all the way through and have chamfered edges so that they can easily slide into \u0026amp; out of your hitch receiver. The Solid Steel Shank also comes with two pin holes on the shank for more adjustment options.  All BulletProof Hitches™ feature a durable corrosion-resistant powder coat. This process starts with an aggressive sandblast to remove all impurities and create a clean surface for the powder coat. After the sandblast process, the hitch moves through a 5-stage pretreatment wash to remove any oil or residue. The metal itself is then sealed to eliminate the possibility of corrosion. The final step is an application of our signature black textured powder coat, which is applied by a Fanuc robot to ensure consistent thickness across the hitch.\u003c\/p\u003e\n\n\u003cp\u003eThe components of the BulletProof Hitch™ are machined in house on our state-of-the-art Haas CNC machines. These CNC machines use Renishaw probes, allowing us to manufacture all of our parts to an extremely tight tolerance. This primarily ensures that each hitch and ball combination fit together without slop or excess movement when attached to your vehicle.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMADE IN THE USA!\u003c\/li\u003e\n\n\u003cli\u003eSolid Steel Shank\u003c\/li\u003e\n\n\u003cli\u003e8\" Drop\/Rise Hitch\u003c\/li\u003e\n\n\u003cli\u003e2\" Ball: 12,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e2-5\/16\" Ball: 22,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e22,000 lb Max Towing Capacity\u003c\/li\u003e\n\n\u003cli\u003e3,000 lb Tongue Weight Capacity\u003c\/li\u003e\n\n\u003cli\u003eSignature Black Textured Powder Coat\u003c\/li\u003e\n\n\u003cli\u003eExceed SAE-J684 testing requirements\u003c\/li\u003e\n\n\u003cli\u003eRide Heights That Are Easily Adjustable \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUniversal \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAll of our hitches can be used in the drop or rise position and maintain the same weight capacity in either position.\u003c\/li\u003e\n\n\u003cli\u003eThis 2.0\" Heavy Duty hitch has a max towing capacity of 22,000 lbs and a tongue weight capacity of 3,000 lbs in both the drop \u0026amp; rise positions.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"BulletProof Hitches","offers":[{"title":"Default Title","offer_id":45075583271069,"sku":"HD208","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198745078.jpg?v=1713417493"},{"product_id":"bulletproof-hitches-heavy-duty-2-solid-shank-10-drop-rise-22000-lbs-hitch-hd2010-2-2-5-16-ball","title":"BulletProof Hitches Heavy Duty 2\" Solid Shank 10\" Drop\/Rise 22,000 LBS Hitch","description":"\u003cp\u003eBulletProof Hitches 2.0\" Heavy Duty 10\" Drop or Rise Hitch is unlike any of our competitors' products. We worked hard to create 1 amazing Hitch that does the work of 10.  Our hitches are extensively tested and exceed SAE-J684 testing requirements. They are built to such a high standard that we have never had a single failure. Each adjustable mount includes a 2-ball platform, 2\" \u0026amp; 2-5\/16\" Dual Ball, which fits in the adjustable channel of the hitch. The 2 hitch balls are welded together onto the solid steel platform for maximum strength and stability.\u003c\/p\u003e\n\n\u003cp\u003eThe Heavy Duty and Extreme Duty hitch shanks are solid steel all the way through and have chamfered edges so that they can easily slide into \u0026amp; out of your hitch receiver. The Solid Steel Shank also comes with two pin holes on the shank for more adjustment options.  All BulletProof Hitches™ feature a durable corrosion-resistant powder coat. This process starts with an aggressive sandblast to remove all impurities and create a clean surface for the powder coat. After the sandblast process, the hitch moves through a 5-stage pretreatment wash to remove any oil or residue. The metal itself is then sealed to eliminate the possibility of corrosion. The final step is an application of our signature black textured powder coat, which is applied by a Fanuc robot to ensure consistent thickness across the hitch.\u003c\/p\u003e\n\n\u003cp\u003eThe components of the BulletProof Hitch™ are machined in house on our state-of-the-art Haas CNC machines. These CNC machines use Renishaw probes, allowing us to manufacture all of our parts to an extremely tight tolerance. This primarily ensures that each hitch and ball combination fit together without slop or excess movement when attached to your vehicle.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMADE IN THE USA!\u003c\/li\u003e\n\n\u003cli\u003eSolid Steel Shank\u003c\/li\u003e\n\n\u003cli\u003e10\" Drop\/Rise Hitch\u003c\/li\u003e\n\n\u003cli\u003e2\" Ball: 12,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e2-5\/16\" Ball: 22,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e22,000 lb Max Towing Capacity\u003c\/li\u003e\n\n\u003cli\u003e3,000 lb Tongue Weight Capacity\u003c\/li\u003e\n\n\u003cli\u003eSignature Black Textured Powder Coat\u003c\/li\u003e\n\n\u003cli\u003eExceed SAE-J684 testing requirements\u003c\/li\u003e\n\n\u003cli\u003eRide Heights That Are Easily Adjustable \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUniversal \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAll of our hitches can be used in the drop or rise position and maintain the same weight capacity in either position.\u003c\/li\u003e\n\n\u003cli\u003eThis 2.0\" Heavy Duty hitch has a max towing capacity of 22,000 lbs and a tongue weight capacity of 3,000 lbs in both the drop \u0026amp; rise positions.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"BulletProof Hitches","offers":[{"title":"Default Title","offer_id":45075584319645,"sku":"HD2010 - 2\" \u0026 2-5\/16\" Ball","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198745094.jpg?v=1713417496"},{"product_id":"bulletproof-hitches-heavy-duty-2-solid-shank-12-drop-rise-22000-lbs-hitch-hd2012-2-2-5-16-ball","title":"BulletProof Hitches Heavy Duty 2\" Solid Shank 12\" Drop\/Rise 22,000 LBS Hitch","description":"\u003cp\u003eBulletProof Hitches 2.0\" Heavy Duty 12\" Drop or Rise Hitch is unlike any of our competitors' products. We worked hard to create 1 amazing Hitch that does the work of 10.  Our hitches are extensively tested and exceed SAE-J684 testing requirements. They are built to such a high standard that we have never had a single failure. Each adjustable mount includes a 2-ball platform, 2\" \u0026amp; 2-5\/16\" Dual Ball, which fits in the adjustable channel of the hitch. The 2 hitch balls are welded together onto the solid steel platform for maximum strength and stability.\u003c\/p\u003e\n\n\u003cp\u003eThe Heavy Duty and Extreme Duty hitch shanks are solid steel all the way through and have chamfered edges so that they can easily slide into \u0026amp; out of your hitch receiver. The Solid Steel Shank also comes with two pin holes on the shank for more adjustment options.  All BulletProof Hitches™ feature a durable corrosion-resistant powder coat. This process starts with an aggressive sandblast to remove all impurities and create a clean surface for the powder coat. After the sandblast process, the hitch moves through a 5-stage pretreatment wash to remove any oil or residue. The metal itself is then sealed to eliminate the possibility of corrosion. The final step is an application of our signature black textured powder coat, which is applied by a Fanuc robot to ensure consistent thickness across the hitch.\u003c\/p\u003e\n\n\u003cp\u003eThe components of the BulletProof Hitch™ are machined in house on our state-of-the-art Haas CNC machines. These CNC machines use Renishaw probes, allowing us to manufacture all of our parts to an extremely tight tolerance. This primarily ensures that each hitch and ball combination fit together without slop or excess movement when attached to your vehicle.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMADE IN THE USA!\u003c\/li\u003e\n\n\u003cli\u003eSolid Steel Shank\u003c\/li\u003e\n\n\u003cli\u003e12\" Drop\/Rise Hitch\u003c\/li\u003e\n\n\u003cli\u003e2\" Ball: 12,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e2-5\/16\" Ball: 22,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e22,000 lb Max Towing Capacity\u003c\/li\u003e\n\n\u003cli\u003e3,000 lb Tongue Weight Capacity\u003c\/li\u003e\n\n\u003cli\u003eSignature Black Textured Powder Coat\u003c\/li\u003e\n\n\u003cli\u003eExceed SAE-J684 testing requirements\u003c\/li\u003e\n\n\u003cli\u003eRide Heights That Are Easily Adjustable \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUniversal \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAll of our hitches can be used in the drop or rise position and maintain the same weight capacity in either position.\u003c\/li\u003e\n\n\u003cli\u003eThis 2.0\" Heavy Duty hitch has a max towing capacity of 22,000 lbs and a tongue weight capacity of 3,000 lbs in both the drop \u0026amp; rise positions.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"BulletProof Hitches","offers":[{"title":"Default Title","offer_id":45075586973853,"sku":"HD2012 - 2\" \u0026 2-5\/16\" Ball","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198745113.jpg?v=1713417502"},{"product_id":"bulletproof-hitches-heavy-duty-2-solid-shank-14-drop-rise-22000-lbs-hitch-hd2014-2-2-5-16-ball","title":"BulletProof Hitches Heavy Duty 2\" Solid Shank 14\" Drop\/Rise 22,000 LBS Hitch","description":"\u003cp\u003eBulletProof Hitches 2.0\" Heavy Duty 14\" Drop or Rise Hitch is unlike any of our competitors' products. We worked hard to create 1 amazing Hitch that does the work of 10.  Our hitches are extensively tested and exceed SAE-J684 testing requirements. They are built to such a high standard that we have never had a single failure. Each adjustable mount includes a 2-ball platform, 2\" \u0026amp; 2-5\/16\" Dual Ball, which fits in the adjustable channel of the hitch. The 2 hitch balls are welded together onto the solid steel platform for maximum strength and stability.\u003c\/p\u003e\n\n\u003cp\u003eThe Heavy Duty and Extreme Duty hitch shanks are solid steel all the way through and have chamfered edges so that they can easily slide into \u0026amp; out of your hitch receiver. The Solid Steel Shank also comes with two pin holes on the shank for more adjustment options.  All BulletProof Hitches™ feature a durable corrosion-resistant powder coat. This process starts with an aggressive sandblast to remove all impurities and create a clean surface for the powder coat. After the sandblast process, the hitch moves through a 5-stage pretreatment wash to remove any oil or residue. The metal itself is then sealed to eliminate the possibility of corrosion. The final step is an application of our signature black textured powder coat, which is applied by a Fanuc robot to ensure consistent thickness across the hitch.\u003c\/p\u003e\n\n\u003cp\u003eThe components of the BulletProof Hitch™ are machined in house on our state-of-the-art Haas CNC machines. These CNC machines use Renishaw probes, allowing us to manufacture all of our parts to an extremely tight tolerance. This primarily ensures that each hitch and ball combination fit together without slop or excess movement when attached to your vehicle.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMADE IN THE USA!\u003c\/li\u003e\n\n\u003cli\u003eSolid Steel Shank\u003c\/li\u003e\n\n\u003cli\u003e14\" Drop\/Rise Hitch\u003c\/li\u003e\n\n\u003cli\u003e2\" Ball: 12,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e2-5\/16\" Ball: 22,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e22,000 lb Max Towing Capacity\u003c\/li\u003e\n\n\u003cli\u003e3,000 lb Tongue Weight Capacity\u003c\/li\u003e\n\n\u003cli\u003eSignature Black Textured Powder Coat\u003c\/li\u003e\n\n\u003cli\u003eExceed SAE-J684 testing requirements\u003c\/li\u003e\n\n\u003cli\u003eRide Heights That Are Easily Adjustable \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUniversal \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAll of our hitches can be used in the drop or rise position and maintain the same weight capacity in either position.\u003c\/li\u003e\n\n\u003cli\u003eThis 2.0\" Heavy Duty hitch has a max towing capacity of 22,000 lbs and a tongue weight capacity of 3,000 lbs in both the drop \u0026amp; rise positions.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"BulletProof Hitches","offers":[{"title":"Default Title","offer_id":45075591725213,"sku":"HD2014 - 2\" \u0026 2-5\/16\" Ball","price":439.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198745131.jpg?v=1713417514"},{"product_id":"bulletproof-hitches-heavy-duty-2-solid-shank-16-drop-rise-22000-lbs-hitch-hd2016-2-2-5-16-ball","title":"BulletProof Hitches Heavy Duty 2\" Solid Shank 16\" Drop\/Rise 22,000 LBS Hitch","description":"\u003cp\u003eBulletProof Hitches 2.0\" Heavy Duty 16\" Drop or Rise Hitch is unlike any of our competitors' products. We worked hard to create 1 amazing Hitch that does the work of 10.  Our hitches are extensively tested and exceed SAE-J684 testing requirements. They are built to such a high standard that we have never had a single failure. Each adjustable mount includes a 2-ball platform, 2\" \u0026amp; 2-5\/16\" Dual Ball, which fits in the adjustable channel of the hitch. The 2 hitch balls are welded together onto the solid steel platform for maximum strength and stability.\u003c\/p\u003e\n\n\u003cp\u003eThe Heavy Duty and Extreme Duty hitch shanks are solid steel all the way through and have chamfered edges so that they can easily slide into \u0026amp; out of your hitch receiver. The Solid Steel Shank also comes with two pin holes on the shank for more adjustment options.  All BulletProof Hitches™ feature a durable corrosion-resistant powder coat. This process starts with an aggressive sandblast to remove all impurities and create a clean surface for the powder coat. After the sandblast process, the hitch moves through a 5-stage pretreatment wash to remove any oil or residue. The metal itself is then sealed to eliminate the possibility of corrosion. The final step is an application of our signature black textured powder coat, which is applied by a Fanuc robot to ensure consistent thickness across the hitch.\u003c\/p\u003e\n\n\u003cp\u003eThe components of the BulletProof Hitch™ are machined in house on our state-of-the-art Haas CNC machines. These CNC machines use Renishaw probes, allowing us to manufacture all of our parts to an extremely tight tolerance. This primarily ensures that each hitch and ball combination fit together without slop or excess movement when attached to your vehicle.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMADE IN THE USA!\u003c\/li\u003e\n\n\u003cli\u003eSolid Steel Shank\u003c\/li\u003e\n\n\u003cli\u003e16\" Drop\/Rise Hitch\u003c\/li\u003e\n\n\u003cli\u003e2\" Ball: 12,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e2-5\/16\" Ball: 22,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e22,000 lb Max Towing Capacity\u003c\/li\u003e\n\n\u003cli\u003e3,000 lb Tongue Weight Capacity\u003c\/li\u003e\n\n\u003cli\u003eSignature Black Textured Powder Coat\u003c\/li\u003e\n\n\u003cli\u003eExceed SAE-J684 testing requirements\u003c\/li\u003e\n\n\u003cli\u003eRide Heights That Are Easily Adjustable \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUniversal \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAll of our hitches can be used in the drop or rise position and maintain the same weight capacity in either position.\u003c\/li\u003e\n\n\u003cli\u003eThis 2.0\" Heavy Duty hitch has a max towing capacity of 22,000 lbs and a tongue weight capacity of 3,000 lbs in both the drop \u0026amp; rise positions.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"BulletProof Hitches","offers":[{"title":"Default Title","offer_id":45075591987357,"sku":"HD2016 - 2\" \u0026 2-5\/16\" Ball","price":459.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198745147.jpg?v=1713417515"},{"product_id":"bulletproof-hitches-extreme-duty-2-solid-shank-4-drop-rise-30000-lbs-hitch-ed204-2-2-5-16-ball","title":"BulletProof Hitches Extreme Duty 2\" Solid Shank 4\" Drop\/Rise 30,000 LBS Hitch","description":"\u003cp\u003eBulletProof Hitches 2.0\" Extreme Duty 4\" Drop or Rise Hitch is unlike any of our competitors' products. We worked hard to create 1 amazing Hitch that does the work of 10.  Our hitches are extensively tested and exceed SAE-J684 testing requirements. They are built to such a high standard that we have never had a single failure. Each adjustable mount includes a 2-ball platform, 2\" \u0026amp; 2-5\/16\" Dual Ball, which fits in the adjustable channel of the hitch. The 2 hitch balls are welded together onto the solid steel platform for maximum strength and stability.\u003c\/p\u003e\n\n\u003cp\u003eThe Heavy Duty and Extreme Duty hitch shanks are solid steel all the way through and have chamfered edges so that they can easily slide into \u0026amp; out of your hitch receiver. The Solid Steel Shank also comes with two pin holes on the shank for more adjustment options.  All BulletProof Hitches™ feature a durable corrosion-resistant powder coat. This process starts with an aggressive sandblast to remove all impurities and create a clean surface for the powder coat. After the sandblast process, the hitch moves through a 5-stage pretreatment wash to remove any oil or residue. The metal itself is then sealed to eliminate the possibility of corrosion. The final step is an application of our signature black textured powder coat, which is applied by a Fanuc robot to ensure consistent thickness across the hitch.\u003c\/p\u003e\n\n\u003cp\u003eThe components of the BulletProof Hitch™ are machined in house on our state-of-the-art Haas CNC machines. These CNC machines use Renishaw probes, allowing us to manufacture all of our parts to an extremely tight tolerance. This primarily ensures that each hitch and ball combination fit together without slop or excess movement when attached to your vehicle.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMADE IN THE USA!\u003c\/li\u003e\n\n\u003cli\u003eSolid Steel Shank\u003c\/li\u003e\n\n\u003cli\u003e4\" Drop\/Rise Hitch\u003c\/li\u003e\n\n\u003cli\u003e2\" Ball: 12,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e2-5\/16\" Ball: 30,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e30,000 lb Max Towing Capacity\u003c\/li\u003e\n\n\u003cli\u003e6,000 lb Tongue Weight Capacity\u003c\/li\u003e\n\n\u003cli\u003eSignature Black Textured Powder Coat\u003c\/li\u003e\n\n\u003cli\u003eExceed SAE-J684 testing requirements\u003c\/li\u003e\n\n\u003cli\u003eRide Heights That Are Easily Adjustable \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUniversal \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eThis 2.0\" Extreme Duty  hitch has a max towing capacity of 30,000 lbs and a tongue weight capacity of 6,000 lbs in both the drop \u0026amp; rise positions.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"BulletProof Hitches","offers":[{"title":"Default Title","offer_id":45075600474269,"sku":"ED204 - 2\" \u0026 2-5\/16\" Ball","price":409.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198745181.jpg?v=1713417534"},{"product_id":"bulletproof-hitches-extreme-duty-2-solid-shank-6-drop-rise-30000-lbs-hitch-ed206-2-2-5-16-ball","title":"BulletProof Hitches Extreme Duty 2\" Solid Shank 6\" Drop\/Rise 30,000 LBS Hitch","description":"\u003cp\u003eBulletProof Hitches 2.0\" Extreme Duty 6\" Drop or Rise Hitch is unlike any of our competitors' products. We worked hard to create 1 amazing Hitch that does the work of 10.  Our hitches are extensively tested and exceed SAE-J684 testing requirements. They are built to such a high standard that we have never had a single failure. Each adjustable mount includes a 2-ball platform, 2\" \u0026amp; 2-5\/16\" Dual Ball, which fits in the adjustable channel of the hitch. The 2 hitch balls are welded together onto the solid steel platform for maximum strength and stability.\u003c\/p\u003e\n\n\u003cp\u003eThe Heavy Duty and Extreme Duty hitch shanks are solid steel all the way through and have chamfered edges so that they can easily slide into \u0026amp; out of your hitch receiver. The Solid Steel Shank also comes with two pin holes on the shank for more adjustment options.  All BulletProof Hitches™ feature a durable corrosion-resistant powder coat. This process starts with an aggressive sandblast to remove all impurities and create a clean surface for the powder coat. After the sandblast process, the hitch moves through a 5-stage pretreatment wash to remove any oil or residue. The metal itself is then sealed to eliminate the possibility of corrosion. The final step is an application of our signature black textured powder coat, which is applied by a Fanuc robot to ensure consistent thickness across the hitch.\u003c\/p\u003e\n\n\u003cp\u003eThe components of the BulletProof Hitch™ are machined in house on our state-of-the-art Haas CNC machines. These CNC machines use Renishaw probes, allowing us to manufacture all of our parts to an extremely tight tolerance. This primarily ensures that each hitch and ball combination fit together without slop or excess movement when attached to your vehicle.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eMADE IN THE USA!\u003c\/li\u003e\n\n\u003cli\u003eSolid Steel Shank\u003c\/li\u003e\n\n\u003cli\u003e6\" Drop\/Rise Hitch\u003c\/li\u003e\n\n\u003cli\u003e2\" Ball: 12,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e2-5\/16\" Ball: 30,000 lb Rating\u003c\/li\u003e\n\n\u003cli\u003e30,000 lb Max Towing Capacity\u003c\/li\u003e\n\n\u003cli\u003e6,000 lb Tongue Weight Capacity\u003c\/li\u003e\n\n\u003cli\u003eSignature Black Textured Powder Coat\u003c\/li\u003e\n\n\u003cli\u003eExceed SAE-J684 testing requirements\u003c\/li\u003e\n\n\u003cli\u003eRide Heights That Are Easily Adjustable \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eUniversal \u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eThis 2.0\" Extreme Duty  hitch has a max towing capacity of 30,000 lbs and a tongue weight capacity of 6,000 lbs in both the drop \u0026amp; rise positions.\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"BulletProof Hitches","offers":[{"title":"Default Title","offer_id":45075601391773,"sku":"ED206 - 2\" \u0026 2-5\/16\" Ball","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198745201.jpg?v=1713417537"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/collections\/F198701224.jpg?v=1712561383","url":"https:\/\/rudysdiesel.com\/collections\/exterior.oembed?page=7","provider":"Rudy's Performance Parts","version":"1.0","type":"link"}