{"title":"Icon Vehicle Dynamics","description":null,"products":[{"product_id":"icon-stage-4-suspension-system-for-17-19-f-150-raptor","title":"Icon Stage 4 Suspension System For 17-19 F-150 Raptor","description":"\u003cp\u003eAfter hundreds of hours of R\u0026amp;D and thousands of miles of real world on and off-road testing, ICON engineers have developed products that provide a true performance upgrade over the factory components found on the 2017-UP Ford F150 Raptor. The Gen. 2 Raptor is faster, lighter, and smarter than its older brother - suspension mounting locations have changed, a significant amount of weight was trimmed off of the truck, and new technology has been introduced both on the side of safety and performance. In typical ICON fashion, the new Raptor was pushed to its limits in stock trim to build a list of performance “needs and wants”. After this process, the ICON engineering team began to go over the truck front to rear to identify any opportunities to overcome the limits of the OE suspension and achieve the gains laid out in the previous phases of R\u0026amp;D.\u003c\/p\u003e\n\n\u003cp\u003eThe front end geometry of the Gen. 2 Raptor was found to be fairly similar to the previous model truck, however the shock mounting points had been moved higher up on the chassis. Seeing this as an opportunity, the team was able to design a 3.0 Series coilover that has more shaft travel while utilizing a barreled coil spring for more efficient packaging. The vehicle-specific valving featured in these shocks and the all new ICON-engineered spring work together to provide exceptional on-road ride quality with excellent off-road characteristics. ICON’s multi-stage hydraulic “Bump Zone” adds to the performance capability by providing an exponential increase in damping ability during the last 40% of compression travel for superior bottom-out resistance. In the ride zone, these 3.0 Series coilovers see a 50% increase in damping ability with the use of a significantly larger piston than what is found in the factory shocks. New 10” finned aluminum reservoirs provide a generous amount of shock oil while also providing an increase in surface area (over 200%) for enhanced cooling and consistent damping. The addition of ICON’s CDC Valve technology provides 10 settings of damping adjustment allowing the end-user to adjust the “feel” of the shocks for different terrains and vehicle cargo configurations.\u003c\/p\u003e\n\n\u003cp\u003eICON's billet aluminum upper control arms are designed with built-in caster correction for predictable handling and feature on-vehicle camber\/caster adjustment for precise vehicle alignment. These upper control arms include ICON's patent pending Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.\u003c\/p\u003e\n\n\u003cp\u003eThe rear of the updated Ford Raptor was a highlight for ICON engineers, as new changes proved to be for the better. One significant change was that the shock mounting layout went from a parallel style setup to an offset design. While this is great for controlling axle wrap, it required a thorough reevaluation of the way ICON shocks would need to function to make the most of the refreshed rear end. In the R\u0026amp;D process it was found that Gen. 2 had more available wheel travel than the original Raptor, and by way of an offset upper eyelet ICON engineers laid out a 3.0 Series bypass shock that maximized travel while utilizing the factory shock mounts. To control the rear end in specific ranges of travel, these shocks feature 3 unique bypass zones – 2 on the compression stroke and one rebound. Unlike other shocks that have a loud bypass “click” when functioning, ICON bypass valves feature damped valve stops for quiet and precise operation. Easy-to-adjust knobs allow for quick changes to shock tuning without the need for tools, enabling the user to dial in their ride with minimal down time. When in use on and off-road, ICON’s patented Anti-Wobble Link stabilizes the shocks to prevent rotation and possible collision. Additionally, urethane shin guards protect the shock shafts and rod ends under grueling off-road conditions.\u003c\/p\u003e\n\n\u003cp\u003eThe function of the bump stop is to control and limit the final position of the suspension during up-travel. The factory bump stops have a limited energy absorption capacity and an uncontrolled release of this energy upon rebound – translating into a harsh ride and poor handling during more aggressive driving in rough terrain. ICON addresses this weakness with a hydraulic rear bump stop kit which includes heavy duty steel clamshell brackets, a billet aluminum frame crossmember, adjustable tension rods, hydraulic bump stops, and all of the necessary hardware required to complete the installation. Combining all of these components helps to increase energy absorption and chassis rigidity resulting in predictable handling and confidence inspiring performance.\u003c\/p\u003e\n\n\u003cp\u003eTo compliment ICON's rear 3.0 Series bypass shocks and hydraulic bump stop kit, ICON engineers decided to scrap the OE rear leaf springs and develop a replacement that addressed a couple issues found in the R\u0026amp;D process. The result is a user-adjustable, multi-rate leaf pack that offers a major performance gain for almost every Raptor setup imaginable. To increase the ride quality of the truck and gain additional droop travel, the spring rate was designed to be slightly lighter than factory, which was found to be on the stiff side for smaller, choppier terrain. While most Raptor owners will embrace the improved ride quality this provides, there are those who have outfitted their trucks with a significant amount of weight and require more load carrying capability. Understanding this, ICON engineers designed the leaf pack with an additional leaf (included with kit) that can be exchanged or added to the pack, yielding an additional 20% or 40% spring rate that will work well for heavier vehicles. The resulting spring pack produces a ride that is much smoother in all terrain, significantly reduces axle wrap, while also adding durability and strength.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHolistic Engineering - the ICON Difference\u003c\/strong\u003e\u003cbr\u003eWhen developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This \"holistic engineering\" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.\u003c\/p\u003e\n\n\u003cp\u003eICON Vehicle Dynamics products are proudly designed, manufactured, and assembled in Riverside, California by a team of passionate off-road enthusiasts. With a reputation for quality, performance, and service it's clear that ICON Vehicle Dynamics is the top choice for performance suspension systems and shock absorbers for the 2017-UP Ford F150 Raptor.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e3.0 SERIES COILOVER SHOCK KIT\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAdjustable coilovers yield 1-3” of front lift height\u003c\/li\u003e\n\n\u003cli\u003eIncreased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use\u003c\/li\u003e\n\n\u003cli\u003e50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions\u003c\/li\u003e\n\n\u003cli\u003eSuperior low speed control reduces body roll and increases on-road stability\u003c\/li\u003e\n\n\u003cli\u003eEasy-to-adjust CDC Valve (Compression Damping Control) has 10 compression damping settings to suit all types of driving styles across varying terrain and vehicle cargo setups \u003c\/li\u003e\n\n\u003cli\u003eICON’s multi-stage hydraulic “Bump Zone” exponentially increases bottom-out resistance in the last 40% of compression travel\u003c\/li\u003e\n\n\u003cli\u003e10\" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping\u003c\/li\u003e\n\n\u003cli\u003eBarreled coil spring design maximizes travel and provides more efficient packaging\u003c\/li\u003e\n\n\u003cli\u003eHigh quality ICON-engineered coil springs are guaranteed for life against sagging or breakage\u003c\/li\u003e\n\n\u003cli\u003eHeavy duty CNC machined 1” shock shafts\u003c\/li\u003e\n\n\u003cli\u003eFK Rod End COM12 spherical bearings ensure maximum strength and durability\u003c\/li\u003e\n\n\u003cli\u003eCAD plated shock body with hard anodized piston and top cap\u003c\/li\u003e\n\n\u003cli\u003eFully serviceable design allows for revalves, rebuilds, and an immeasurable service life\u003c\/li\u003e\n\n\u003cli\u003eBolt-in design makes for an easy install into OEM shock location\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003e\u003cstrong\u003eBILLET ALUMINUM UPPER CONTROL ARM KIT\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eCNC machined 6061 billet aluminum construction for light weight and exceptional strength\u003c\/li\u003e\n\n\u003cli\u003eBuilt-in caster correction improves front end geometry\u003c\/li\u003e\n\n\u003cli\u003ePatent pending Delta Joint for maximum durability and noise-free operation\u003c\/li\u003e\n\n\u003cli\u003eCamber and caster adjustability allows for precise wheel alignment\u003c\/li\u003e\n\n\u003cli\u003eICON double adjuster sleeves for easy on-vehicle adjustment\u003c\/li\u003e\n\n\u003cli\u003eVehicle specific taper pin provides OE-like fitment\u003c\/li\u003e\n\n\u003cli\u003ePTFE Lined 7\/8” FK Rod Ends increase rigidity and improve response\u003c\/li\u003e\n\n\u003cli\u003eBuilt in o-ring sealed dust cover cap\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003e3.0 SERIES 3-TUBE BYPASS SHOCK KIT\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e3-tube bypass design and \"Bump Zone\" technology provides multiple unique zones of damping and rebound control\u003c\/li\u003e\n\n\u003cli\u003e50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions\u003c\/li\u003e\n\n\u003cli\u003e12\" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping\u003c\/li\u003e\n\n\u003cli\u003eOffset upper eyelet with patented ICON Anti-Wobble link for optimized shock mounting and packaging\u003c\/li\u003e\n\n\u003cli\u003eEasy-to-adjust detented knobs offer quick adjustability without the use of tools\u003c\/li\u003e\n\n\u003cli\u003eSpecially engineered damped valve stops for quiet and precise operation without the loud “clicking” noise common with other brands\u003c\/li\u003e\n\n\u003cli\u003eHeavy duty CNC machined 1” shock shafts\u003c\/li\u003e\n\n\u003cli\u003eFK Rod End COM12 spherical bearings ensure maximum strength and durability\u003c\/li\u003e\n\n\u003cli\u003eUrethane shin guards help to protect the shock shaft \u0026amp; rod end from premature wear\u003c\/li\u003e\n\n\u003cli\u003eCAD plated shock body with hard anodized piston and top cap\u003c\/li\u003e\n\n\u003cli\u003eFully serviceable design allows for revalves, rebuilds, and an immeasurable service life\u003c\/li\u003e\n\n\u003cli\u003eBolt-in design makes for an easy install into OEM shock location\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003e\u003cstrong\u003eHYDRAULIC REAR BUMP STOP KIT\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eBolt-on installation does not require any fabrication or removal of the bed\u003c\/li\u003e\n\n\u003cli\u003e2.5” travel hydraulic bump stop reduces rear end ‘kick’ and improves overall vehicle performance\u003c\/li\u003e\n\n\u003cli\u003eVelocity sensitive technology exponentially increases bottom-out resistance\u003c\/li\u003e\n\n\u003cli\u003eVehicle specific bump stop tune provides smooth engagement and excellent ride quality\u003c\/li\u003e\n\n\u003cli\u003e6061 billet aluminum crossmember increases chassis rigidity to improve overall vehicle dynamics\u003c\/li\u003e\n\n\u003cli\u003eSteel clamshell brackets strengthen the frame in critical areas to prevent damage from extreme off-road use\u003c\/li\u003e\n\n\u003cli\u003eAdjustable tension rods allow the frame to be preloaded to withstand torsional force during hard impacts\u003c\/li\u003e\n\n\u003cli\u003eHeavy duty 1.25” CNC machined nitro steel shafts\u003c\/li\u003e\n\n\u003cli\u003eMulti-stage CAD plated body for maximum corrosion resistance\u003c\/li\u003e\n\n\u003cli\u003eReplaceable noise-reducing striker pad\u003c\/li\u003e\n\n\u003cli\u003eFully serviceable\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003e\u003cstrong\u003eMULTI-RATE LEAF SPRING KIT\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e3 user-adjustable spring rates for unique vehicle setups\u003c\/li\u003e\n\n\u003cli\u003eTriple military wrap front eyelet and rear half wrap for increased durability\u003c\/li\u003e\n\n\u003cli\u003eRebound leaf reduces severe axle wrap\u003c\/li\u003e\n\n\u003cli\u003eLeaf separators and tip inserts reduce noise and friction while increasing ride comfort\u003c\/li\u003e\n\n\u003cli\u003eDirect bolt-in to OEM spring location makes for an easy install\u003c\/li\u003e\n\n\u003cli\u003e“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003eWHEEL \u0026amp; TIRE FITMENT INFO:\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eOEM Wheels \u0026amp; Tires: Yes\u003c\/li\u003e\n\n\u003cli\u003eAftermarket Wheels: 8.5\" Wide, 5\" Backspace\u003c\/li\u003e\n\n\u003cli\u003eAftermarket Tires: 35 x 12.50 \u003cem\u003e(Larger tires may fit but fender trimming may be required)\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003eSYSTEM COMPONENTS:\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003e\u003cstrong\u003e95002\u003c\/strong\u003e (QTY.1) | 17-UP RAPTOR FRONT 3.0 VS RR CDCV COILOVER KIT\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e95205\u003c\/strong\u003e (QTY.1) | 17-UP RAPTOR REAR 3.0 SERIES PB PAIR\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e98561DJ\u003c\/strong\u003e (QTY.1) | 10-UP RAPTOR BILLET UCA DJ KIT\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e95225\u003c\/strong\u003e (QTY.1) | 17-UP RAPTOR MULTI RATE LEAF SPRING KIT\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e95121\u003c\/strong\u003e (QTY.1) | 17-UP RAPTOR REAR AIR BUMP KIT\u003c\/p\u003e\n\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":44932558389405,"sku":"K93154","price":14419.53,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198708345.jpg?v=1712571330"},{"product_id":"icon-stage-3-suspension-system-for-17-19-f-150-raptor","title":"Icon Stage 3 Suspension System For 17-19 F-150 Raptor","description":"\u003cp\u003eAfter hundreds of hours of R\u0026amp;D and thousands of miles of real world on and off-road testing, ICON engineers have developed products that provide a true performance upgrade over the factory components found on the 2017-UP Ford F150 Raptor. The Gen. 2 Raptor is faster, lighter, and smarter than its older brother - suspension mounting locations have changed, a significant amount of weight was trimmed off of the truck, and new technology has been introduced both on the side of safety and performance. In typical ICON fashion, the new Raptor was pushed to its limits in stock trim to build a list of performance “needs and wants”. After this process, the ICON engineering team began to go over the truck front to rear to identify any opportunities to overcome the limits of the OE suspension and achieve the gains laid out in the previous phases of R\u0026amp;D.\u003c\/p\u003e\n\n\u003cp\u003eThe front end geometry of the Gen. 2 Raptor was found to be fairly similar to the previous model truck, however the shock mounting points had been moved higher up on the chassis. Seeing this as an opportunity, the team was able to design a 3.0 Series coilover that has more shaft travel while utilizing a barreled coil spring for more efficient packaging. The vehicle-specific valving featured in these shocks and the all new ICON-engineered spring work together to provide exceptional on-road ride quality with excellent off-road characteristics. ICON’s multi-stage hydraulic “Bump Zone” adds to the performance capability by providing an exponential increase in damping ability during the last 40% of compression travel for superior bottom-out resistance. In the ride zone, these 3.0 Series coilovers see a 50% increase in damping ability with the use of a significantly larger piston than what is found in the factory shocks. New 10” finned aluminum reservoirs provide a generous amount of shock oil while also providing an increase in surface area (over 200%) for enhanced cooling and consistent damping. The addition of ICON’s CDC Valve technology provides 10 settings of damping adjustment allowing the end-user to adjust the “feel” of the shocks for different terrains and vehicle cargo configurations.\u003c\/p\u003e\n\n\u003cp\u003eICON's billet aluminum upper control arms are designed with built-in caster correction for predictable handling and feature on-vehicle camber\/caster adjustment for precise vehicle alignment. These upper control arms include ICON's patent pending Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.\u003c\/p\u003e\n\n\u003cp\u003eThe rear of the updated Ford Raptor was a highlight for ICON engineers, as new changes proved to be for the better. One significant change was that the shock mounting layout went from a parallel style setup to an offset design. While this is great for controlling axle wrap, it required a thorough reevaluation of the way ICON shocks would need to function to make the most of the refreshed rear end. In the R\u0026amp;D process it was found that Gen. 2 had more available wheel travel than the original Raptor, and by way of an offset upper eyelet ICON engineers laid out a 3.0 Series bypass shock that maximized travel while utilizing the factory shock mounts. To control the rear end in specific ranges of travel, these shocks feature 3 unique bypass zones – 2 on the compression stroke and one rebound. Unlike other shocks that have a loud bypass “click” when functioning, ICON bypass valves feature damped valve stops for quiet and precise operation. Easy-to-adjust knobs allow for quick changes to shock tuning without the need for tools, enabling the user to dial in their ride with minimal down time. When in use on and off-road, ICON’s patented Anti-Wobble Link stabilizes the shocks to prevent rotation and possible collision. Additionally, urethane shin guards protect the shock shafts and rod ends under grueling off-road conditions.\u003c\/p\u003e\n\n\u003cp\u003eTo compliment ICON's rear 3.0 Series bypass shocks, ICON engineers decided to scrap the OE rear leaf springs and develop a replacement that addressed a couple issues found in the R\u0026amp;D process. The result is a user-adjustable, multi-rate leaf pack that offers a major performance gain for almost every Raptor setup imaginable. To increase the ride quality of the truck and gain additional droop travel, the spring rate was designed to be slightly lighter than factory, which was found to be on the stiff side for smaller, choppier terrain. While most Raptor owners will embrace the improved ride quality this provides, there are those who have outfitted their trucks with a significant amount of weight and require more load carrying capability. Understanding this, ICON engineers designed the leaf pack with an additional leaf (included with kit) that can be exchanged or added to the pack, yielding an additional 20% or 40% spring rate that will work well for heavier vehicles. The resulting spring pack produces a ride that is much smoother in all terrain, significantly reduces axle wrap, while also adding durability and strength.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHolistic Engineering - the ICON Difference\u003c\/strong\u003e\u003cbr\u003eWhen developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This \"holistic engineering\" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.\u003c\/p\u003e\n\n\u003cp\u003eICON Vehicle Dynamics products are proudly designed, manufactured, and assembled in Riverside, California by a team of passionate off-road enthusiasts. With a reputation for quality, performance, and service it's clear that ICON Vehicle Dynamics is the top choice for performance suspension systems and shock absorbers for the 2017-UP Ford F150 Raptor.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e3.0 SERIES COILOVER SHOCK KIT\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAdjustable coilovers yield 1-3” of front lift height\u003c\/li\u003e\n\n\u003cli\u003eIncreased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use\u003c\/li\u003e\n\n\u003cli\u003e50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions\u003c\/li\u003e\n\n\u003cli\u003eSuperior low speed control reduces body roll and increases on-road stability\u003c\/li\u003e\n\n\u003cli\u003eEasy-to-adjust CDC Valve (Compression Damping Control) has 10 compression damping settings to suit all types of driving styles across varying terrain and vehicle cargo setups \u003c\/li\u003e\n\n\u003cli\u003eICON’s multi-stage hydraulic “Bump Zone” exponentially increases bottom-out resistance in the last 40% of compression travel\u003c\/li\u003e\n\n\u003cli\u003e10\" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping\u003c\/li\u003e\n\n\u003cli\u003eBarreled coil spring design maximizes travel and provides more efficient packaging\u003c\/li\u003e\n\n\u003cli\u003eHigh quality ICON-engineered coil springs are guaranteed for life against sagging or breakage\u003c\/li\u003e\n\n\u003cli\u003eHeavy duty CNC machined 1” shock shafts\u003c\/li\u003e\n\n\u003cli\u003eFK Rod End COM12 spherical bearings ensure maximum strength and durability\u003c\/li\u003e\n\n\u003cli\u003eCAD plated shock body with hard anodized piston and top cap\u003c\/li\u003e\n\n\u003cli\u003eFully serviceable design allows for revalves, rebuilds, and an immeasurable service life\u003c\/li\u003e\n\n\u003cli\u003eBolt-in design makes for an easy install into OEM shock location\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003e\u003cstrong\u003eBILLET ALUMINUM UPPER CONTROL ARM KIT\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eCNC machined 6061 billet aluminum construction for light weight and exceptional strength\u003c\/li\u003e\n\n\u003cli\u003eBuilt-in caster correction improves front end geometry\u003c\/li\u003e\n\n\u003cli\u003ePatent pending Delta Joint for maximum durability and noise-free operation\u003c\/li\u003e\n\n\u003cli\u003eCamber and caster adjustability allows for precise wheel alignment\u003c\/li\u003e\n\n\u003cli\u003eICON double adjuster sleeves for easy on-vehicle adjustment\u003c\/li\u003e\n\n\u003cli\u003eVehicle specific taper pin provides OE-like fitment\u003c\/li\u003e\n\n\u003cli\u003ePTFE Lined 7\/8” FK Rod Ends increase rigidity and improve response\u003c\/li\u003e\n\n\u003cli\u003eBuilt in o-ring sealed dust cover cap\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003e3.0 SERIES 3-TUBE BYPASS SHOCK KIT\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e3-tube bypass design and \"Bump Zone\" technology provides multiple unique zones of damping and rebound control\u003c\/li\u003e\n\n\u003cli\u003e50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions\u003c\/li\u003e\n\n\u003cli\u003e12\" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping\u003c\/li\u003e\n\n\u003cli\u003eOffset upper eyelet with patented ICON Anti-Wobble link for optimized shock mounting and packaging\u003c\/li\u003e\n\n\u003cli\u003eEasy-to-adjust detented knobs offer quick adjustability without the use of tools\u003c\/li\u003e\n\n\u003cli\u003eSpecially engineered damped valve stops for quiet and precise operation without the loud “clicking” noise common with other brands\u003c\/li\u003e\n\n\u003cli\u003eHeavy duty CNC machined 1” shock shafts\u003c\/li\u003e\n\n\u003cli\u003eFK Rod End COM12 spherical bearings ensure maximum strength and durability\u003c\/li\u003e\n\n\u003cli\u003eUrethane shin guards help to protect the shock shaft \u0026amp; rod end from premature wear\u003c\/li\u003e\n\n\u003cli\u003eCAD plated shock body with hard anodized piston and top cap\u003c\/li\u003e\n\n\u003cli\u003eFully serviceable design allows for revalves, rebuilds, and an immeasurable service life\u003c\/li\u003e\n\n\u003cli\u003eBolt-in design makes for an easy install into OEM shock location\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003e\u003cstrong\u003eMULTI-RATE LEAF SPRING KIT\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e3 user-adjustable spring rates for unique vehicle setups\u003c\/li\u003e\n\n\u003cli\u003eTriple military wrap front eyelet and rear half wrap for increased durability\u003c\/li\u003e\n\n\u003cli\u003eRebound leaf reduces severe axle wrap\u003c\/li\u003e\n\n\u003cli\u003eLeaf separators and tip inserts reduce noise and friction while increasing ride comfort\u003c\/li\u003e\n\n\u003cli\u003eDirect bolt-in to OEM spring location makes for an easy install\u003c\/li\u003e\n\n\u003cli\u003e“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003eWHEEL \u0026amp; TIRE FITMENT INFO:\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eOEM Wheels \u0026amp; Tires: Yes\u003c\/li\u003e\n\n\u003cli\u003eAftermarket Wheels: 8.5\" Wide, 5\" Backspace\u003c\/li\u003e\n\n\u003cli\u003eAftermarket Tires: 35 x 12.50 \u003cem\u003e(Larger tires may fit but fender trimming may be required)\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003eSYSTEM COMPONENTS:\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003e\u003cstrong\u003e95002\u003c\/strong\u003e (QTY.1) | 17-UP RAPTOR FRONT 3.0 VS RR CDCV COILOVER KIT\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e95205\u003c\/strong\u003e (QTY.1) | 17-UP RAPTOR REAR 3.0 SERIES PB PAIR\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e98561DJ\u003c\/strong\u003e (QTY.1) | 10-UP RAPTOR BILLET UCA DJ KIT\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e95225\u003c\/strong\u003e (QTY.1) | 17-UP RAPTOR MULTI RATE LEAF SPRING KIT\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e95226\u003c\/strong\u003e (QTY.1) | 17-UP RAPTOR REAR BUMP SPACER KIT\u003c\/p\u003e\n\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":44932558422173,"sku":"K93153","price":11784.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198708347.jpg?v=1712571331"},{"product_id":"icon-1-retrofit-delta-joint-kit-non-icon-uca-for-17-19-f-150-raptor-614564","title":"Icon 1\" Retrofit Delta Joint Kit (Non-Icon UCA) For 17-19 F-150 Raptor","description":"\u003cp\u003eDelta Joint Retrofit Kit for 2010-UP Ford F150 Raptor using non-ICON upper control arms utilizing a 1\" uniball.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eRetrofit kits allow for installation of Delta Joint into wide range of aftermarket upper control arms using a 1\" uniball\u003c\/li\u003e\n\n\u003cli\u003eRetrofit kits include a pair of Delta Joints, retaining rings, and a supply of anti-seize\u003c\/li\u003e\n\n\u003cli\u003ePatent pending Delta Joint combines the durability of a ball joint with the performance characteristics of a traditional uniball\u003c\/li\u003e\n\n\u003cli\u003eSealed design and zinc plated housing protects Delta Joint from the elements, road salts, and other debris\u003c\/li\u003e\n\n\u003cli\u003eMetal on metal internals and a greasable design for maximum longevity and noise-free operation\u003c\/li\u003e\n\n\u003cli\u003eCapable of high angularity required for lifted applications\u003c\/li\u003e\n\n\u003cli\u003eCarburized taper pin provides increased corrosion resistance, decreased internal friction, and less chance of thread galling on assembly\u003c\/li\u003e\n\n\u003cli\u003ePullout strength greater than comparable industry standard uniball\u003c\/li\u003e\n\n\u003cli\u003eApplication specific taper pins for precise fit across a wide range of vehicles\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTECH INFO:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eReplaces all WSSX16, AWX16, WC16, WE16, WSSB16, WR16, ABW16 uniballs with a 2.125\" outside diameter and 1\" height\u003c\/li\u003e\n\n\u003cli\u003eRetrofit kits are designed for use only on listed applications using stock length upper control arms.\u003c\/li\u003e\n\n\u003cli\u003eFitment verification is the duty of the installer! Failure to cycle suspension and check for bind issues may lead to component failure and\/or injury. Professional installation required.\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003ca href=\"http:\/\/iconvehicledynamics.com\/shop\/service-parts\/1202-on-vehicle-uniball-replacement-tool-kit.html\"\u003e\u003cstrong\u003e614518 |\u003c\/strong\u003e ON-VEHICLE UNIBALL REPLACEMENT TOOL\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003ca href=\"http:\/\/iconvehicledynamics.com\/shop\/service-parts\/1255-delta-joint-install-press-adapter-tube.html\"\u003e\u003cstrong\u003e614519 |\u003c\/strong\u003e DELTA JOINT INSTALL PRESS ADAPTER TUBE\u003c\/a\u003e\u003c\/p\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":44932558553245,"sku":"614564","price":349.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198708366.jpg?v=1712571333"},{"product_id":"icon-stage-2-suspension-system-for-17-19-f-150-raptor","title":"Icon Stage 2 Suspension System For 17-19 F-150 Raptor","description":"\u003cp\u003eAfter hundreds of hours of R\u0026amp;D and thousands of miles of real world on and off-road testing, ICON engineers have developed products that provide a true performance upgrade over the factory components found on the 2017-UP Ford F150 Raptor. The Gen. 2 Raptor is faster, lighter, and smarter than its older brother - suspension mounting locations have changed, a significant amount of weight was trimmed off of the truck, and new technology has been introduced both on the side of safety and performance. In typical ICON fashion, the new Raptor was pushed to its limits in stock trim to build a list of performance “needs and wants”. After this process, the ICON engineering team began to go over the truck front to rear to identify any opportunities to overcome the limits of the OE suspension and achieve the gains laid out in the previous phases of R\u0026amp;D.\u003c\/p\u003e\n\n\u003cp\u003eThe front end geometry of the Gen. 2 Raptor was found to be fairly similar to the previous model truck, however the shock mounting points had been moved higher up on the chassis. Seeing this as an opportunity, the team was able to design a 3.0 Series coilover that has more shaft travel while utilizing a barreled coil spring for more efficient packaging. The vehicle-specific valving featured in these shocks and the all new ICON-engineered spring work together to provide exceptional on-road ride quality with excellent off-road characteristics. ICON’s multi-stage hydraulic “Bump Zone” adds to the performance capability by providing an exponential increase in damping ability during the last 40% of compression travel for superior bottom-out resistance. In the ride zone, these 3.0 Series coilovers see a 50% increase in damping ability with the use of a significantly larger piston than what is found in the factory shocks. New 10” finned aluminum reservoirs provide a generous amount of shock oil while also providing an increase in surface area (over 200%) for enhanced cooling and consistent damping. The addition of ICON’s CDC Valve technology provides 10 settings of damping adjustment allowing the end-user to adjust the “feel” of the shocks for different terrains and vehicle cargo configurations.\u003c\/p\u003e\n\n\u003cp\u003eICON's billet aluminum upper control arms are designed with built-in caster correction for predictable handling and feature on-vehicle camber\/caster adjustment for precise vehicle alignment. These upper control arms include ICON's patent pending Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.\u003c\/p\u003e\n\n\u003cp\u003eThe rear of the updated Ford Raptor was a highlight for ICON engineers, as new changes proved to be for the better. One significant change was that the shock mounting layout went from a parallel style setup to an offset design. While this is great for controlling axle wrap, it required a thorough reevaluation of the way ICON shocks would need to function to make the most of the refreshed rear end. In the R\u0026amp;D process it was found that Gen. 2 had more available wheel travel than the original Raptor, and by way of an offset upper eyelet ICON engineers laid out a 3.0 Series bypass shock that maximized travel while utilizing the factory shock mounts. To control the rear end in specific ranges of travel, these shocks feature 3 unique bypass zones – 2 on the compression stroke and one rebound. Unlike other shocks that have a loud bypass “click” when functioning, ICON bypass valves feature damped valve stops for quiet and precise operation. Easy-to-adjust knobs allow for quick changes to shock tuning without the need for tools, enabling the user to dial in their ride with minimal down time. When in use on and off-road, ICON’s patented Anti-Wobble Link stabilizes the shocks to prevent rotation and possible collision. Additionally, urethane shin guards protect the shock shafts and rod ends under grueling off-road conditions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHolistic Engineering - the ICON Difference\u003c\/strong\u003e\u003cbr\u003eWhen developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This \"holistic engineering\" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.\u003c\/p\u003e\n\n\u003cp\u003eICON Vehicle Dynamics products are proudly designed, manufactured, and assembled in Riverside, California by a team of passionate off-road enthusiasts. With a reputation for quality, performance, and service it's clear that ICON Vehicle Dynamics is the top choice for performance suspension systems and shock absorbers for the 2017-UP Ford F150 Raptor.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e3.0 SERIES COILOVER SHOCK KIT\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAdjustable coilovers yield 1-3” of front lift height\u003c\/li\u003e\n\n\u003cli\u003eIncreased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use\u003c\/li\u003e\n\n\u003cli\u003e50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions\u003c\/li\u003e\n\n\u003cli\u003eSuperior low speed control reduces body roll and increases on-road stability\u003c\/li\u003e\n\n\u003cli\u003eEasy-to-adjust CDC Valve (Compression Damping Control) has 10 compression damping settings to suit all types of driving styles across varying terrain and vehicle cargo setups \u003c\/li\u003e\n\n\u003cli\u003eICON’s multi-stage hydraulic “Bump Zone” exponentially increases bottom-out resistance in the last 40% of compression travel\u003c\/li\u003e\n\n\u003cli\u003e10\" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping\u003c\/li\u003e\n\n\u003cli\u003eBarreled coil spring design maximizes travel and provides more efficient packaging\u003c\/li\u003e\n\n\u003cli\u003eHigh quality ICON-engineered coil springs are guaranteed for life against sagging or breakage\u003c\/li\u003e\n\n\u003cli\u003eHeavy duty CNC machined 1” shock shafts\u003c\/li\u003e\n\n\u003cli\u003eFK Rod End COM12 spherical bearings ensure maximum strength and durability\u003c\/li\u003e\n\n\u003cli\u003eCAD plated shock body with hard anodized piston and top cap\u003c\/li\u003e\n\n\u003cli\u003eFully serviceable design allows for revalves, rebuilds, and an immeasurable service life\u003c\/li\u003e\n\n\u003cli\u003eBolt-in design makes for an easy install into OEM shock location\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003e\u003cstrong\u003eBILLET ALUMINUM UPPER CONTROL ARM KIT\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eCNC machined 6061 billet aluminum construction for light weight and exceptional strength\u003c\/li\u003e\n\n\u003cli\u003eBuilt-in caster correction improves front end geometry\u003c\/li\u003e\n\n\u003cli\u003ePatent pending Delta Joint for maximum durability and noise-free operation\u003c\/li\u003e\n\n\u003cli\u003eCamber and caster adjustability allows for precise wheel alignment\u003c\/li\u003e\n\n\u003cli\u003eICON double adjuster sleeves for easy on-vehicle adjustment\u003c\/li\u003e\n\n\u003cli\u003eVehicle specific taper pin provides OE-like fitment\u003c\/li\u003e\n\n\u003cli\u003ePTFE Lined 7\/8” FK Rod Ends increase rigidity and improve response\u003c\/li\u003e\n\n\u003cli\u003eBuilt in o-ring sealed dust cover cap\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003e3.0 SERIES 3-TUBE BYPASS SHOCK KIT\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e3-tube bypass design and \"Bump Zone\" technology provides multiple unique zones of damping and rebound control\u003c\/li\u003e\n\n\u003cli\u003e50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions\u003c\/li\u003e\n\n\u003cli\u003e12\" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping\u003c\/li\u003e\n\n\u003cli\u003eOffset upper eyelet with patented ICON Anti-Wobble link for optimized shock mounting and packaging\u003c\/li\u003e\n\n\u003cli\u003eEasy-to-adjust detented knobs offer quick adjustability without the use of tools\u003c\/li\u003e\n\n\u003cli\u003eSpecially engineered damped valve stops for quiet and precise operation without the loud “clicking” noise common with other brands\u003c\/li\u003e\n\n\u003cli\u003eHeavy duty CNC machined 1” shock shafts\u003c\/li\u003e\n\n\u003cli\u003eFK Rod End COM12 spherical bearings ensure maximum strength and durability\u003c\/li\u003e\n\n\u003cli\u003eUrethane shin guards help to protect the shock shaft \u0026amp; rod end from premature wear\u003c\/li\u003e\n\n\u003cli\u003eCAD plated shock body with hard anodized piston and top cap\u003c\/li\u003e\n\n\u003cli\u003eFully serviceable design allows for revalves, rebuilds, and an immeasurable service life\u003c\/li\u003e\n\n\u003cli\u003eBolt-in design makes for an easy install into OEM shock location\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003eWHEEL \u0026amp; TIRE FITMENT INFO:\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eOEM Wheels \u0026amp; Tires: Yes\u003c\/li\u003e\n\n\u003cli\u003eAftermarket Wheels: 8.5\" Wide, 5\" Backspace\u003c\/li\u003e\n\n\u003cli\u003eAftermarket Tires: 35 x 12.50 \u003cem\u003e(Larger tires may fit but fender trimming may be required)\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003eSYSTEM COMPONENTS:\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cp\u003e\u003cstrong\u003e95002\u003c\/strong\u003e (QTY.1) | 17-UP RAPTOR FRONT 3.0 VS RR CDCV COILOVER KIT\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e95205\u003c\/strong\u003e (QTY.1) | 17-UP RAPTOR REAR 3.0 SERIES PB PAIR\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e98561DJ\u003c\/strong\u003e (QTY.1) | 10-UP RAPTOR BILLET UCA DJ KIT\u003c\/p\u003e\n\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":44932558586013,"sku":"K93152","price":9870.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198708349.jpg?v=1712571333"},{"product_id":"icon-3-0-series-coilover-shock-kit-for-17-19-f-150-raptor-95002","title":"Icon 3.0 Series Coilover Shock Kit For 17-19 F-150 Raptor","description":"\u003cp\u003eThe front end geometry of the Gen 2 Raptor was found to be fairly similar to the previous model truck, however the shock mounting points had been moved higher up on the chassis. Seeing this as an opportunity, the team was able to design a 3.0 Series coilover that has more shaft travel while utilizing a barreled coil spring for more efficient packaging. The vehicle-specific valving featured in these shocks and the all new ICON-engineered spring work together to provide exceptional on-road ride quality with excellent off-road characteristics. ICON’s multi-stage hydraulic “Bump Zone” adds to the performance capability by providing an exponential increase in damping ability during the last 40% of compression travel for superior bottom-out resistance. In the ride zone, these 3.0 Series coilovers see a 50% increase in damping ability with the use of a significantly larger piston than what is found in the factory shocks. New 10” finned aluminum reservoirs provide a generous amount of shock oil while also providing an increase in surface area for enhanced cooling and consistent damping. The addition of ICON’s CDC Valve technology provides 10 settings of damping adjustment allowing the end-user to adjust the “feel” of the shocks for different terrains and vehicle cargo configurations. All of these features work together to deliver the perfect blend of on-road comfort and off-road performance.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eAdjustable coilovers yield 1-3” of front lift height\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eIncreased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eSuperior low speed control reduces body roll and increases on-road stability\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eEasy-to-adjust CDC Valve (Compression Damping Control) has 10 compression damping settings to suit all types of driving styles across varying terrain and vehicle cargo setups \u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eICON’s multi-stage hydraulic “Bump Zone” exponentially increases bottom-out resistance in the last 40% of compression travel\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e10\" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eBarreled coil spring design maximizes travel and provides more efficient packaging\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eHigh quality ICON-engineered coil springs are guaranteed for life against sagging or breakage\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eHeavy duty CNC machined 1” shock shafts\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eFK Rod End COM12 spherical bearings ensure maximum strength and durability\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eCAD plated shock body with hard anodized piston and top cap\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eFully serviceable design allows for revalves, rebuilds, and an immeasurable service life\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eBolt-in design makes for an easy install into OEM shock location\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWHEEL \u0026amp; TIRE FITMENT INFO:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eOEM Wheels \u0026amp; Tires: Yes\u003c\/p\u003e\n\n\u003cp\u003eAftermarket Wheels: 8.5\" Wide Wheel With 5\" Backspace\u003c\/p\u003e\n\n\u003cp\u003eAftermarket Tires: 35X12.50 \u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003e(Larger Tires May Fit but Fender Trimming and Modifications will be Required)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e98561DJ \u003c\/strong\u003e| 2017-UP FORD F-150 RAPTOR BILLET ALUMINUM DELTA JOINT UCA KIT\u003c\/p\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":44932559143069,"sku":"95002","price":4006.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198708373.jpg?v=1712571338"},{"product_id":"icon-3-0-series-rear-bypass-shock-kit-for-17-19-f-150-raptor-95205","title":"Icon 3.0 Series Rear Bypass Shock Kit For 17-19 F-150 Raptor","description":"\u003cp\u003eThe rear of the updated Ford Raptor was a highlight for ICON engineers, as new changes proved to be for the better. One significant change was that the shock mounting layout went from a parallel style setup to an offset design. While this is great for controlling axle wrap, it required a thorough reevaluation of the way ICON shocks would need to function to make the most of the refreshed rear end. In the R\u0026amp;D process it was found that Gen 2 had more available wheel travel than the original Raptor, and by way of an offset upper eyelet ICON engineers laid out a 3.0 Series bypass shock that maximized travel while utilizing the factory shock mounts. To control the rear end in specific ranges of travel, these shocks feature 3 unique bypass zones – 2 on the compression stroke and one rebound. Unlike other shocks that have a loud bypass “click” when functioning, ICON bypass valves feature damped valve stops for quiet and precise operation. Easy-to-adjust knobs allow for quick changes to shock tuning without the need for tools, enabling the user to dial in their ride with minimal down time. When in use on and off-road, ICON’s patented Anti-Wobble Link stabilizes the shocks to prevent rotation and possible collision. Additionally, urethane shin guards protect the shock shafts and rod ends under grueling off-road conditions.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e3-tube bypass design and \"Bump Zone\" technology provides multiple unique zones of damping and rebound control\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e12\" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eOffset upper eyelet with patented ICON Anti-Wobble link for optimized shock mounting and packaging\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eEasy-to-adjust detented knobs offer quick adjustability without the use of tools\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eSpecially engineered damped valve stops for quiet and precise operation without the loud “clicking” noise common with other brands\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eHeavy duty CNC machined 1” shock shafts\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eFK Rod End COM12 spherical bearings ensure maximum strength and durability\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eUrethane shin guards help to protect the shock shaft \u0026amp; rod end from premature wear\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eCAD plated shock body with hard anodized piston and top cap\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eFully serviceable design allows for revalves, rebuilds, and an immeasurable service life\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eBolt-in design makes for an easy install into OEM shock location\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability\u003c\/p\u003e\n\n\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWHEEL \u0026amp; TIRE FITMENT INFO:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eOEM Wheels \u0026amp; Tires: Yes\u003c\/p\u003e\n\n\u003cp\u003eAftermarket Wheels: 8.5\" Wide Wheel With 5\" Backspace\u003c\/p\u003e\n\n\u003cp\u003eAftermarket Tires: 35X12.50 \u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003e(Larger Tires May Fit but Fender Trimming and Modifications will be Required)\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eOPTIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e98561DJ \u003c\/strong\u003e| 2017-UP FORD F-150 RAPTOR BILLET ALUMINUM DELTA JOINT UCA KIT\u003c\/p\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":44932559274141,"sku":"95205","price":4120.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198708383.jpg?v=1712571341"},{"product_id":"icon-impact-series-front-bumper-w-skid-plate-for-17-19-f-150-raptor-95153","title":"Icon IMPACT Series Front Bumper w\/ Skid Plate For 17-19 F-150 Raptor","description":"\u003cp\u003eICON Impact Series Off-Road Armor is designed for the off-road enthusiast seeking a higher level of performance and protection. Staying true to ICON’s holistic engineering approach, Impact Series armor has been thoroughly tested through countless hours of research and development to ensure precise fitment, proper clearance, exceptional durability, and maximum strength.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eModular design with removable\/replaceable wings\u003c\/li\u003e\n\n\u003cli\u003eMaximized ground clearance without cutting of the frame\u003c\/li\u003e\n\n\u003cli\u003eIncreased air flow to the intercooler without the need to relocate\u003c\/li\u003e\n\n\u003cli\u003eAccommodates a 40” light bar on top of center section\u003c\/li\u003e\n\n\u003cli\u003eIntegrated universal light mounts in wing sections\u003c\/li\u003e\n\n\u003cli\u003eComes with radar\/ adaptive cruise control bracket\u003c\/li\u003e\n\n\u003cli\u003eRemovable honeycomb mesh front and wing grills to allow for personal customization\u003c\/li\u003e\n\n\u003cli\u003eFollows OE styling cues \u0026amp; body lines\u003c\/li\u003e\n\n\u003cli\u003eIMPACT Series Skid Plate covers the lower control arm pivots\u003c\/li\u003e\n\n\u003cli\u003eCompatible with stock skid plate\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTECH INFO:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBUMPER THICKNESS:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eSkin: 1\/8” Steel\u003c\/li\u003e\n\n\u003cli\u003eRecovery tabs: 1\/2” Steel\u003c\/li\u003e\n\n\u003cli\u003eMounts \/ Sub Structure: 1\/4” Steel\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eSKID PLATE THICKNESS:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e3\/16” Aluminum\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRECOVERY POINTS:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFits standard 7\/8\" shackles \u0026amp; accessories\u003c\/li\u003e\n\n\u003cli\u003eOE recovery points are lowest approach contact point in stock trim, but are relocated higher with ICON Impact Series bumper for improved ground clearance while retaining off-road functionality\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eIMPACT SERIES DIMENSIONS VS STOCK:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eTop tube of bumper: +1” further than stock\u003c\/li\u003e\n\n\u003cli\u003eBottom of bumper: -1” less than stock (improved approach angle)\u003c\/li\u003e\n\n\u003cli\u003eRecovery tabs: +2” (higher than stock, providing improved approach angle)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eADDITIONAL DETAILS:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e89lbs assembled weight with hardware \u0026amp; radar bracket\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":44932559437981,"sku":"95153","price":1589.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198708408.jpg?v=1712571345"},{"product_id":"icon-uniball-billet-aluminum-upper-control-arm-kit-for-17-19-f-150-raptor-98561","title":"Icon Uniball Billet Aluminum Upper Control Arm Kit For 17-19 F-150 Raptor","description":"\u003cp\u003eThis ICON billet aluminum upper control arm kit is designed to improve the overall performance of the new Ford Raptor with corrected front end geometry, adjustable camber and caster, and improved suspension component clearance. These are constructed of CNC machined 6061 billet aluminum merging light weight with high strength properties. Replacing the OE ball joint with a 1” stainless uniball allows for full bump and droop travel of the front suspension while eliminating bind. FK Rod End 7\/8” heim joints provide precise and smooth function throughout the range of travel while ICON’s signature double adjuster sleeve allows for on-vehicle camber and caster adjustment. Included with all components and hardware necessary for a complete install, these billet UCAs are the perfect upgrade for the 2017-UP Ford Raptor.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eCNC machined 6061 billet aluminum construction for light weight and exceptional strength\u003c\/li\u003e\n\n\u003cli\u003e1” PTFE-lined stainless uniball\u003c\/li\u003e\n\n\u003cli\u003eCamber and caster adjustability allows for precise wheel alignment\u003c\/li\u003e\n\n\u003cli\u003eICON double adjuster sleeves allow for on-vehicle adjustment\u003c\/li\u003e\n\n\u003cli\u003eVehicle specific taper pin provides OE-like fitment\u003c\/li\u003e\n\n\u003cli\u003ePTFE Lined 7\/8” FK Rod Ends for improved response\u003c\/li\u003e\n\n\u003cli\u003eBuilt in o-ring sealed dust cover cap\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWHEEL \u0026amp; TIRE FITMENT INFO:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eAftermarket Wheels \u0026amp; Tires:  Back space 5\"\u003c\/p\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":44932559536285,"sku":"98561","price":1211.21,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198708361.jpg?v=1712571346"},{"product_id":"icon-stage-1-suspension-system-for-17-19-f-150-raptor","title":"Icon Stage 1 Suspension System For 17-19 F-150 Raptor","description":"\u003cp\u003eAfter hundreds of hours of R\u0026amp;D and thousands of miles of real world on and off-road testing, ICON engineers have developed products that provide a true performance upgrade over the factory components found on the 2017-UP Ford F150 Raptor. The Gen. 2 Raptor is faster, lighter, and smarter than its older brother - suspension mounting locations have changed, a significant amount of weight was trimmed off of the truck, and new technology has been introduced both on the side of safety and performance. In typical ICON fashion, the new Raptor was pushed to its limits in stock trim to build a list of performance “needs and wants”. After this process, the ICON engineering team began to go over the truck front to rear to identify any opportunities to overcome the limits of the OE suspension and achieve the gains laid out in the previous phases of R\u0026amp;D.\u003c\/p\u003e\n\n\u003cp\u003eThe front end geometry of the Gen. 2 Raptor was found to be fairly similar to the previous model truck, however the shock mounting points had been moved higher up on the chassis. Seeing this as an opportunity, the team was able to design a 3.0 Series coilover that has more shaft travel while utilizing a barreled coil spring for more efficient packaging. The vehicle-specific valving featured in these shocks and the all new ICON-engineered spring work together to provide exceptional on-road ride quality with excellent off-road characteristics. ICON’s multi-stage hydraulic “Bump Zone” adds to the performance capability by providing an exponential increase in damping ability during the last 40% of compression travel for superior bottom-out resistance. In the ride zone, these 3.0 Series coilovers see a 50% increase in damping ability with the use of a significantly larger piston than what is found in the factory shocks. New 10” finned aluminum reservoirs provide a generous amount of shock oil while also providing an increase in surface area (over 200%) for enhanced cooling and consistent damping. The addition of ICON’s CDC Valve technology provides 10 settings of damping adjustment allowing the end-user to adjust the “feel” of the shocks for different terrains and vehicle cargo configurations.\u003c\/p\u003e\n\n\u003cp\u003eThe rear of the updated Ford Raptor was a highlight for ICON engineers, as new changes proved to be for the better. One significant change was that the shock mounting layout went from a parallel style setup to an offset design. While this is great for controlling axle wrap, it required a thorough reevaluation of the way ICON shocks would need to function to make the most of the refreshed rear end. In the R\u0026amp;D process it was found that Gen. 2 had more available wheel travel than the original Raptor, and by way of an offset upper eyelet ICON engineers laid out a 3.0 Series bypass shock that maximized travel while utilizing the factory shock mounts. To control the rear end in specific ranges of travel, these shocks feature 3 unique bypass zones – 2 on the compression stroke and one rebound. Unlike other shocks that have a loud bypass “click” when functioning, ICON bypass valves feature damped valve stops for quiet and precise operation. Easy-to-adjust knobs allow for quick changes to shock tuning without the need for tools, enabling the user to dial in their ride with minimal down time. When in use on and off-road, ICON’s patented Anti-Wobble Link stabilizes the shocks to prevent rotation and possible collision. Additionally, urethane shin guards protect the shock shafts and rod ends under grueling off-road conditions.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eHolistic Engineering - the ICON Difference\u003c\/strong\u003e\u003cbr\u003eWhen developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This \"holistic engineering\" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.\u003c\/p\u003e\n\n\u003cp\u003eICON Vehicle Dynamics products are proudly designed, manufactured, and assembled in Riverside, California by a team of passionate off-road enthusiasts. With a reputation for quality, performance, and service it's clear that ICON Vehicle Dynamics is the top choice for performance suspension systems and shock absorbers for the 2017-UP Ford F150 Raptor.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e3.0 SERIES COILOVER SHOCK KIT\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eAdjustable coilovers yield 1-3” of front lift height\u003c\/li\u003e\n\n\u003cli\u003eIncreased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use\u003c\/li\u003e\n\n\u003cli\u003e50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions\u003c\/li\u003e\n\n\u003cli\u003eSuperior low speed control reduces body roll and increases on-road stability\u003c\/li\u003e\n\n\u003cli\u003eEasy-to-adjust CDC Valve (Compression Damping Control) has 10 compression damping settings to suit all types of driving styles across varying terrain and vehicle cargo setups \u003c\/li\u003e\n\n\u003cli\u003eICON’s multi-stage hydraulic “Bump Zone” exponentially increases bottom-out resistance in the last 40% of compression travel\u003c\/li\u003e\n\n\u003cli\u003e10\" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping\u003c\/li\u003e\n\n\u003cli\u003eBarreled coil spring design maximizes travel and provides more efficient packaging\u003c\/li\u003e\n\n\u003cli\u003eHigh quality ICON-engineered coil springs are guaranteed for life against sagging or breakage\u003c\/li\u003e\n\n\u003cli\u003eHeavy duty CNC machined 1” shock shafts\u003c\/li\u003e\n\n\u003cli\u003eFK Rod End COM12 spherical bearings ensure maximum strength and durability\u003c\/li\u003e\n\n\u003cli\u003eCAD plated shock body with hard anodized piston and top cap\u003c\/li\u003e\n\n\u003cli\u003eFully serviceable design allows for revalves, rebuilds, and an immeasurable service life\u003c\/li\u003e\n\n\u003cli\u003eBolt-in design makes for an easy install into OEM shock location\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003e3.0 SERIES 3-TUBE BYPASS SHOCK KIT\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e3-tube bypass design and \"Bump Zone\" technology provides multiple unique zones of damping and rebound control\u003c\/li\u003e\n\n\u003cli\u003e50% increase in damping ability over OE shocks for excellent performance in extreme off-road conditions\u003c\/li\u003e\n\n\u003cli\u003e12\" finned aluminum reservoirs provide generous oil volume and increased surface area for enhanced cooling properties and consistent damping\u003c\/li\u003e\n\n\u003cli\u003eOffset upper eyelet with patented ICON Anti-Wobble link for optimized shock mounting and packaging\u003c\/li\u003e\n\n\u003cli\u003eEasy-to-adjust detented knobs offer quick adjustability without the use of tools\u003c\/li\u003e\n\n\u003cli\u003eSpecially engineered damped valve stops for quiet and precise operation without the loud “clicking” noise common with other brands\u003c\/li\u003e\n\n\u003cli\u003eHeavy duty CNC machined 1” shock shafts\u003c\/li\u003e\n\n\u003cli\u003eFK Rod End COM12 spherical bearings ensure maximum strength and durability\u003c\/li\u003e\n\n\u003cli\u003eUrethane shin guards help to protect the shock shaft \u0026amp; rod end from premature wear\u003c\/li\u003e\n\n\u003cli\u003eCAD plated shock body with hard anodized piston and top cap\u003c\/li\u003e\n\n\u003cli\u003eFully serviceable design allows for revalves, rebuilds, and an immeasurable service life\u003c\/li\u003e\n\n\u003cli\u003eBolt-in design makes for an easy install into OEM shock location\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003eWHEEL \u0026amp; TIRE FITMENT INFO:\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eOEM Wheels \u0026amp; Tires: Yes\u003c\/li\u003e\n\n\u003cli\u003eAftermarket Wheels: 8.5\" Wide, 5\" Backspace\u003c\/li\u003e\n\n\u003cli\u003eAftermarket Tires: 35 x 12.50 \u003cem\u003e(Larger tires may fit but fender trimming may be required)\u003c\/em\u003e\n\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cdiv\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/div\u003e\n\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003eSYSTEM COMPONENTS:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e95002\u003c\/strong\u003e (QTY.1) | 17-UP RAPTOR FRONT 3.0 VS RR CDCV COILOVER KIT\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e95205\u003c\/strong\u003e (QTY.1) | 17-UP RAPTOR REAR 3.0 SERIES PB PAIR\u003c\/p\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":44932560126109,"sku":"K93151","price":8127.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198708351.jpg?v=1712571353"},{"product_id":"icon-multi-rate-rear-leaf-spring-kit-for-17-19-f-150-raptor-95225","title":"Icon Multi-Rate Rear Leaf Spring Kit For 17-19 F-150 Raptor","description":"\u003cp\u003eThe Ford Raptor is an extremely capable truck that has captured the attention of the off-road community over the past few years. Since the Raptor’s release ICON Vehicle Dynamics’ engineers have pushed this vehicle to extremes to develop the most sophisticated suspension components on the market. From the brutal deserts of the Southwest, to the deep snow of Michigan’s U.P., to the wooded trails of the East coast ICON suspension systems have been put to the test and performed flawlessly. Unable to leave “well-enough” alone, ICON is aiming to once again raise the bar in Raptor performance with the release of a multi-rate leaf spring that represents the latest component in the ICON complete suspension system for the Gen 2 Raptor.\u003c\/p\u003e\n\n\u003cp\u003eTo fully take advantage of ICON’s current 2017-UP F150 Raptor offerings, ICON engineers decided to scrap the OE leaf springs and develop a replacement that addressed a couple issues found in the R\u0026amp;D process. The result is a user-adjustable multi-rate leaf pack that offers a major performance gain for almost every Raptor setup imaginable. To increase the ride quality of the truck and gain additional droop travel, the spring rate was designed to be slightly lighter than factory, which was found to be on the stiff side for smaller, choppier terrain. While most Raptor owners will embrace the improved ride quality this provides, there are those who have outfitted their trucks with a significant amount of weight and require more load carrying capability.\u003c\/p\u003e\n\n\u003cp\u003eFeatures like tip inserts and leaf separators add to ride comfort, while a triple military wrapped front and rear half wrapped eyelet increases durability and strength of the leaf spring. A rebound leaf was added to reduce the axle wrap of the Raptor, which was another issue that has been found through ICON’s extensive testing. These features all combine for a ride that is night and day smoother on choppy trails, dirt roads, and even in the parking lot. No matter if its a spare tire, chase rack, a roof top tent, or more this ICON leaf spring is the perfect option for 2017-UP Ford F150 Raptors looking to improve the ride quality and performance with a reliable and proven bolt-on solution.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMULTI-RATE INFO:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eOption #1 (as shipped)\u003c\/p\u003e\n\n\u003cp\u003e+1.00\" lift height over stock (unloaded)\u003c\/p\u003e\n\n\u003cp\u003eOption #2\u003c\/p\u003e\n\n\u003cp\u003e+20% spring rate over Option #1\u003c\/p\u003e\n\n\u003cp\u003e+2.25\" lift height over stock (unloaded)\u003c\/p\u003e\n\n\u003cp\u003e+1.00\" lift height over stock w\/ 400lb constant load\u003c\/p\u003e\n\n\u003cp\u003eOption #3\u003c\/p\u003e\n\n\u003cp\u003e+40% spring rate over option #1\u003c\/p\u003e\n\n\u003cp\u003e+3.00\" lift height over stock (unloaded)\u003c\/p\u003e\n\n\u003cp\u003e+0.50\" lift height over stock w\/ 850lb constant load \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e3 user-adjustable spring rates for unique vehicle setups\u003c\/li\u003e\n\n\u003cli\u003eTriple military wrap front eyelet and rear half wrap for increased durability\u003c\/li\u003e\n\n\u003cli\u003eRebound leaf reduces severe axle wrap\u003c\/li\u003e\n\n\u003cli\u003eLeaf separators and tip inserts reduce noise and friction while increasing ride comfort\u003c\/li\u003e\n\n\u003cli\u003eDirect bolt-in to OEM spring location makes for an easy install\u003c\/li\u003e\n\n\u003cli\u003e“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cdiv\u003e \u003c\/div\u003e\n\n\u003cp\u003e\u003cstrong\u003eTECH INFO:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eCompatible with factory shocks\u003c\/li\u003e\n\n\u003cli\u003eDoes not require modification of factory exhaust system\u003c\/li\u003e\n\n\u003cli\u003eRemoval of the bed is not required for installation\u003c\/li\u003e\n\n\u003cli\u003eICON multi-rate leaf springs require bump stop spacer kit (PN: 95226) if ICON's \u003cbr\u003ehydraulic bump stop kit (PN: 95121) is not used\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":44932560650397,"sku":"95225","price":1399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198713391.jpg?v=1712571356"},{"product_id":"icon-dual-rate-lift-coils","title":"Icon Dual Rate Lift Coils","description":"\u003cp\u003e\u003cfont color=\"#000000\"\u003eDual rate lift coils offer a nice improvement over the stock ride.  With a softer initial rate to soak up small road imperfections and a firmer secondary for larger pot holes, these help you to gain additional lift and make the truck ride even better!\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003eThe lift amount of these is accurate after the initial settling.  These will not sag like many of the coils on the market.  We have tested many different coils on the market and found these to ride the best!  These are sold as a pair.\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003eIf your looking for a slightly different height, check out our top and bottom mount coil spacers to achieve just the stance your looking for!\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003eThese are manufactured by Icon Vehicle Dynamics.\u003c\/font\u003e\u003c\/p\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45073323163805,"sku":"PMF-FRD-8000","price":349.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198667290.jpg?v=1713404578"},{"product_id":"icon-dual-rate-lift-coils-pmf-frd-8000-2-5","title":"Icon Dual Rate Lift Coils","description":"\u003cp\u003e\u003cfont color=\"#000000\"\u003eDual rate lift coils offer a nice improvement over the stock ride.  With a softer initial rate to soak up small road imperfections and a firmer secondary for larger pot holes, these help you to gain additional lift and make the truck ride even better!\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003eThe lift amount of these is accurate after the initial settling.  These will not sag like many of the coils on the market.  We have tested many different coils on the market and found these to ride the best!  These are sold as a pair.\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003eIf your looking for a slightly different height, check out our top and bottom mount coil spacers to achieve just the stance your looking for!\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003eThese are manufactured by Icon Vehicle Dynamics.\u003c\/font\u003e\u003c\/p\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45073807311005,"sku":"PMF-FRD-8000-2.5","price":399.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198686098.jpg?v=1713405969"},{"product_id":"icon-dual-rate-lift-coils-pmf-frd-8000-4-5","title":"Icon Dual Rate Lift Coils","description":"\u003cp\u003e\u003cfont color=\"#000000\"\u003eDual rate lift coils offer a nice improvement over the stock ride.  With a softer initial rate to soak up small road imperfections and a firmer secondary for larger pot holes, these help you to gain additional lift and make the truck ride even better!\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003eThe lift amount of these is accurate after the initial settling.  These will not sag like many of the coils on the market.  We have tested many different coils on the market and found these to ride the best!  These are sold as a pair.\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003eIf your looking for a slightly different height, check out our top and bottom mount coil spacers to achieve just the stance your looking for!\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003eThese are manufactured by Icon Vehicle Dynamics.\u003c\/font\u003e\u003c\/p\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45073807900829,"sku":"PMF-FRD-8000-4.5","price":349.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198686099.jpg?v=1713405971"},{"product_id":"icon-dual-rate-lift-coils-pmf-frd-8000-7-0","title":"Icon Dual Rate Lift Coils","description":"\u003cp\u003e\u003cfont color=\"#000000\"\u003eDual rate lift coils offer a nice improvement over the stock ride.  With a softer initial rate to soak up small road imperfections and a firmer secondary for larger pot holes, these help you to gain additional lift and make the truck ride even better!\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003eThe lift amount of these is accurate after the initial settling.  These will not sag like many of the coils on the market.  We have tested many different coils on the market and found these to ride the best!  These are sold as a pair.\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003eIf your looking for a slightly different height, check out our top and bottom mount coil spacers to achieve just the stance your looking for!\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003e\u003cbr\u003e\u003c\/font\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cfont color=\"#000000\"\u003eThese are manufactured by Icon Vehicle Dynamics.\u003c\/font\u003e\u003c\/p\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45073808883869,"sku":"PMF-FRD-8000-7.0","price":349.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198686100.jpg?v=1713405974"},{"product_id":"icon-3-coil-over-spacer-kit-for-2021-ford-bronco-2-4-door-up-to-35-tires-ivd4300","title":"ICON 3\" Coil Over Spacer Kit For 2021 Ford Bronco 2 \u0026 4 Door Up To 35\" Tires","description":"\u003cp\u003eThe ICON 2021-UP Fords Bronco 3\" Lift Coilover Spacer Kit utilizes a combination of coil spring preload spacers and top load shims to yield 3” of lift in the front and 2” of rear lift for Sasquatch equipped models, or up to 2.75” of lift in the rear for Non-Sasquatch Broncos. Taking the front-end geometry of the Bronco into account, this kit is designed to provide lift while ensuring that here is no ball joint over extension or bind that can cause damage to ball joints. CNC machined 6061 billet aluminum construction and a black anodized finish mean this product can stand up to the test of time in the harshest on and off-road conditions. Backed by ICON’s limited lifetime warranty, the ICON Vehicle Dynamics 3\" Lift Coilover Spacer Kit is the best leveling solution on the market for the 2021-UP Ford Bronco.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eVehicle specific design\u003c\/li\u003e\n\n\u003cli\u003eIncreased ground clearance\u003c\/li\u003e\n\n\u003cli\u003eNo ball joint over extension or bind\u003c\/li\u003e\n\n\u003cli\u003eCNC machined 6061 aluminum components.\u003c\/li\u003e\n\n\u003cli\u003eKeeps oversized tire from interference with fender\u003c\/li\u003e\n\n\u003cli\u003eBlack anodized finish for excellent corrosion resistance\u003c\/li\u003e\n\n\u003cli\u003eIncreased ride height over stock (3” lift front, up to 2.75” lift rear)\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2021 Ford Bronco 2 door and 4 door\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eWill NOT fit Bronco Sport models\u003c\/li\u003e\n\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\n\u003cli\u003eRecommended Aftermarket Wheels (Without Sasquatch Package): ICON Alloys | 17x8.5\" w\/ 5.75” Backspace \/ 25mm Offset\u003c\/li\u003e\n\n\u003cli\u003eRecommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys | 17x8.5\" w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/li\u003e\n\n\u003cli\u003eRecommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys | 18x9\" w\/ 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n\n\u003cli\u003eRecommended Aftermarket Wheels (With Sasquatch Package): ICON Alloys | 20x9\" w\/ 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n\n\u003cli\u003eRecommended Aftermarket Tires (Without Sasquatch Package): 35\" x 12.50\" (Requires high clearance crash bars, ICON part number 42000)\u003c\/li\u003e\n\n\u003cli\u003eRecommended Aftermarket Tires (With Sasquatch Package): 37\" x 12.50\" (May require fender trimming and modifications)\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45075834273949,"sku":"IVD4300","price":457.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198747183.jpg?v=1713418257"},{"product_id":"icon-billet-adjustable-upper-control-arms-w-delta-joints-2010-2020-ford-raptor-98562dj","title":"Icon Billet Adjustable Upper Control Arms W\/ Delta Joints 2010-2020 Ford Raptor","description":"\u003cp\u003eThis ICON billet aluminum upper control arm kit is designed to improve the overall performance of the new Ford Raptor with corrected front end geometry, adjustable camber and caster, and improved suspension component clearance. These are constructed of CNC machined 6061 billet aluminum merging light weight with high strength properties. Replacing the OE ball joint with the available ICON Delta Joint allows for full bump and droop travel of the front suspension while eliminating bind. FK Rod End 7\/8” heim joints provide precise and smooth function throughout the range of travel while ICON’s signature double adjuster sleeve allows for on-vehicle camber and caster adjustment. Included with all components and hardware necessary for a complete install, these billet UCAs are the perfect upgrade for the 2010-2020 Ford Raptor.\u003c\/p\u003e\n\n\u003cp\u003eThese upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eFeatures ICON's Delta Joint\u003c\/li\u003e\n\n\u003cli\u003eBuilt in o-ring sealed dust cover cap\u003c\/li\u003e\n\n\u003cli\u003eVehicle specific taper pin provides OE-like fitment\u003c\/li\u003e\n\n\u003cli\u003ePTFE Lined 7\/8” FK Rod Ends for improved response\u003c\/li\u003e\n\n\u003cli\u003eICON double adjuster sleeves allow for on-vehicle adjustment\u003c\/li\u003e\n\n\u003cli\u003eCamber and caster adjustability allows for precise wheel alignment\u003c\/li\u003e\n\n\u003cli\u003eCNC machined 6061 billet aluminum construction for light weight and exceptional strength\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e2010-2020 Ford Raptor\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eRecommended Aftermarket Wheels: 17x8.5 w\/ 5\" BS \/ 6mm Offset\u003c\/li\u003e\n\n\u003c\/ul\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":45075879133341,"sku":"98562DJ","price":1742.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/F198747661.jpg?v=1713418380"},{"product_id":"icon-heavy-duty-add-a-leaf-kit-w-1-5-rear-lift-for-96-23-toyota-tacoma-tundra","title":"ICON Heavy Duty Add-A-Leaf Kit w\/ 1.5\" Rear Lift For 96-23 Toyota Tacoma\/Tundra","description":"\u003cp\u003e\u003cspan\u003eThe ICON Vehicle Dynamics Progressive Add-A-Leaf kit is a great way to lift the rear of your 1996-2023 Toyota Tacoma or 2000-2006 Toyota Tundra while also improving rear end ride quality. Installing in place of the factory overload leaves, this kit effectively lowers the rear spring rate by approximately 10% for a more compliant ride. This three-leaf progressive rate Add-A-Leaf Kit comes complete with U-bolts and center pins for an easy install. This kit will give your Tacoma or Tundra 1.5 inches of lift after installation. Simply remove the factory overload spring, bolt up the kits, and say goodbye to that rough factory ride.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eProvides 1.5” of lift on stock weight rear end\u003c\/li\u003e\n\u003cli\u003eLowers rear spring rate for smoother ride quality\u003c\/li\u003e\n\u003cli\u003eUses high-quality progressive rate, lifetime guaranteed leaf springs\u003c\/li\u003e\n\u003cli\u003eInstallation is easy, using common socket wrench, torque wrench, and cut-off wheel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e1996-2023 Toyota Tacoma\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2000-2006 Toyota Tundra\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eU-bolts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLeaf springs\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit is intended for near stock weight vehicles and will yield more exaggerated rear end squat under load. For heavier equipped 2005-2023 Tacomas, consider ICON Multi-Rate Rear Leaf Springs, part number 158505\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2017-2023 Tacoma TRD Pro models will have net rear lift height 1\" over stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46000210477213,"sku":"51100","price":284.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_bbd569bb-f471-49a5-b3f3-01a97ece5b8b.jpg?v=1727277863"},{"product_id":"icon-2-lift-rear-spring-kit-for-2003-2024-toyota-fj-cruiser-4runner-lexus-gx","title":"ICON 2\" Lift Rear Spring Kit For 2003-2024 Toyota FJ Cruiser\/4Runner \u0026 Lexus GX","description":"\u003cdiv\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eThese Linear-rate coil springs provide two inches of lift and improves your on- and off-road ride quality. The slightly higher than stock spring rate helps with load bearing capacity while increasing ride height to clear larger tires. When used in conjunction with ICON's rear 2.0 Aluminum Series or 2.5 Series shocks, the ride quality and performance is unbeatable.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eEasy install makes for a simple and cost effective upgrade\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eLinear-rate coil allows for exceptional ride quality and performance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eDual stage powder coat for long-lasting corrosion resistance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eICON engineered coil spring guaranteed for life against sagging and breaking\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cb\u003eFitment:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e2007-2014 Toyota FJ Cruiser\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e2003-2024 Toyota 4Runner\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e2003-2023 Lexus GX\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e(2) ICON Rear Springs\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eModels equipped with air ride rear suspension also require coil spring conversion kit, part number 56110\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46000309305501,"sku":"52700","price":286.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_25038010-6839-4f92-b429-35f0023e5b6b.jpg?v=1727279745"},{"product_id":"icon-tubular-front-upper-control-arm-w-delta-joint-kit-for-05-23-toyota-tacoma","title":"ICON Tubular Front Upper Control Arm w\/ Delta Joint Kit For 05-23 Toyota Tacoma","description":"\u003cdiv\u003eTake the performance of your 2005-2023 Toyota Tacoma to new levels with the ICON Vehicle Dynamics Delta Joint tubular upper control arm kit. All ICON tubular upper control arms are constructed from CNC bent 1026 DOM steel tubing and then powder coated to a semi-gloss black finish for maximum strength and corrosion resistance. ICON upper control arms are engineered with built-in caster correction for optimal alignment specifications and confidence inspiring handling. A main benefit of ICON upper control arms is the potential for increased wheel travel when paired with our extended travel coilovers, this translates into superior performance and ride quality for your 2005-2023 Toyota Tacoma. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFeatures patented ICON Delta Joint (U.S. Pat. 10,731,700)\u003c\/li\u003e\n\u003cli\u003e1026 DOM Steel Construction\u003c\/li\u003e\n\u003cli\u003eCNC Bent Tubing\u003c\/li\u003e\n\u003cli\u003eServiceable Dual Stage Bushings\u003c\/li\u003e\n\u003cli\u003eCNC Machined Bushing Housings and Sleeves\u003c\/li\u003e\n\u003cli\u003eBuilt-In Caster Correction\u003c\/li\u003e\n\u003cli\u003eBlack Semi-Gloss Powder Coat Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFitment:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2005-2023 Toyota Tacoma\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) ICON Tubular Front Upper Control Arms\u003c\/li\u003e\n\u003cli\u003eDelta Joint Kit\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5 with 4.75” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9 with 5.00” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 20x9 with 5.00” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 33\" x 11.50\" (Larger tires may fit but fender trimming and modifications will be required)\u003c\/li\u003e\n\u003cli\u003eOnly compatible with OE spindles. DO NOT install in combination with ANY aftermarket spindles\u003c\/li\u003e\n\u003cli\u003eWill not fit 2005-2015 2WD 5-Lug Toyota Tacoma models\u003c\/li\u003e\n\u003cli\u003eCompatible with 2-3.5\" of front lift over stock on 2005-2015 Toyota Tacoma\u003c\/li\u003e\n\u003cli\u003eCompatible with 1.25-2.75\" of front lift over stock on 2016-2023 Toyota Tacoma\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46000430186653,"sku":"58450DJ","price":892.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_deddc9ab-929e-45de-8667-3a42c67bdff7.jpg?v=1727281170"},{"product_id":"icon-upper-control-arms-w-delta-joint-kit-for-03-24-toyota-fj-4runner-lexus-gx","title":"ICON Upper Control Arms w\/Delta Joint Kit For 03-24 Toyota FJ\/4Runner \u0026 Lexus GX","description":"\u003cdiv\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eTake the performance of your Toyota 4Runner, FJ Cruiser, or Lexus GX to new levels with the ICON Vehicle Dynamics Delta Joint tubular upper control arm kit. All ICON tubular upper control arms are constructed from CNC bent 1026 DOM steel tubing and then powder coated to a semi-gloss black finish for maximum strength and corrosion resistance. ICON upper control arms are engineered with built-in caster correction for optimal alignment specifications and confidence inspiring handling. A main benefit of ICON upper control arms is the potential for increased wheel travel when paired with our extended travel coilovers, this translates into superior performance and ride quality for your vehicle. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eICON Delta Joint\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e1026 DOM Steel Construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eCNC Bent Tubing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eServiceable Dual Stage Bushings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eCNC Machined Bushing Housings and Sleeves\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eBuilt-In Caster Correction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eBlack Semi-Gloss Powder Coat Finish\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cb\u003eFitment:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e2007-2014 Toyota FJ Cruiser\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e2003-2024 Toyota 4Runner\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e2003-2023 Lexus GX\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e(2) ICON Tubular Front Upper Control Arms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eDelta Joint Kit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eAll Mounting Hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eFactory Wheels \u0026amp; Tires Fitment: Yes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eCompatible with 2-3.5\" of front lift over stock\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5 w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9 w\/ 5\" Backspace \/ 0mm Offset\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eRecommended Aftermarket Wheels: ICON Alloys - 20x9 w\/ 5\" Backspace \/ 0mm Offset\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eRecommended Aftermarket Tires: 33\" x 11.50\"\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46000798990493,"sku":"58451DJ","price":892.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/5_d842e7a3-ff28-490a-8391-c8a5f2c8f4c2.jpg?v=1727286805"},{"product_id":"icon-multi-rate-leaf-pack-spring-w-add-in-leaf-for-2017-2023-ford-f-150-raptor","title":"ICON Multi Rate Leaf Pack Spring w\/Add In Leaf For 2017-2025 Ford F-150\/Raptor","description":"\u003cdiv\u003eThe Ford Raptor is an extremely capable truck that has captured the attention of the off-road community over the past few years. Since the Raptor’s release ICON Vehicle Dynamics’ engineers have pushed this vehicle to extremes to develop the most sophisticated suspension components on the market. From the brutal deserts of the Southwest, to the deep snow of Michigan’s U.P., to the wooded trails of the East coast ICON suspension systems have been put to the test and performed flawlessly. Unable to leave “well-enough” alone, ICON is aiming to once again raise the bar in Raptor performance with the release of a multi-rate leaf spring that represents the latest component in the ICON complete suspension system for the Gen 2 Raptor.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e+2.25\" lift height over stock (unloaded)\u003c\/div\u003e\n\u003cdiv\u003e+1.00\" lift height over stock w\/ 400lb constant load\u003c\/div\u003e\n\u003cdiv\u003eRaptor Option #3 (+40% spring rate over option #1)\u003c\/div\u003e\n\u003cdiv\u003e+3.00\" lift height over stock (unloaded)\u003c\/div\u003e\n\u003cdiv\u003e+0.50\" lift height over stock w\/ 850lb constant load\u003c\/div\u003e\n\u003cdiv\u003eMULTI-RATE INFO 2021-2023 F-150 XL, XLT, Lariat, King Ranch, Platinum, and Limited\u003c\/div\u003e\n\u003cdiv\u003eF-150 Option #1 (as shipped)\u003c\/div\u003e\n\u003cdiv\u003e+2.50\" lift height over stock (unloaded)\u003c\/div\u003e\n\u003cdiv\u003eF-150 Option #2 (+20% spring rate over Option #1)\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eTo fully take advantage of ICON’s current 2017-2020 F150 Raptor offerings, ICON engineers decided to scrap the OE leaf springs and develop a replacement that addressed a couple issues found in the R\u0026amp;D process. The result is a user-adjustable multi-rate leaf pack that offers a major performance gain for almost every Raptor setup imaginable. To increase the ride quality of the truck and gain additional droop travel, the spring rate was designed to be slightly lighter than factory, which was found to be on the stiff side for smaller, choppier terrain. While most Raptor owners will embrace the improved ride quality this provides, there are those who have outfitted their trucks with a significant amount of weight and require more load carrying capability. Understanding this, ICON engineers designed the leaf pack with an additional leaf (included with kit) that can be exchanged or added to the pack, yielding an additional 20% or 40% spring rate that will work well for heavier vehicles.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e+3.75\" lift height over stock (unloaded)\u003c\/div\u003e\n\u003cdiv\u003e+2.50\" lift height over stock w\/ 400lb constant load\u003c\/div\u003e\n\u003cdiv\u003eF-150 Option #3 (+40% spring rate over option #1)\u003c\/div\u003e\n\u003cdiv\u003e+4.50\" lift height over stock (unloaded)\u003c\/div\u003e\n\u003cdiv\u003e+2.00\" lift height over stock w\/ 850lb constant load\u003c\/div\u003e\n\u003cdiv\u003eMULTI-RATE INFO 2021-2023 F-150 Tremor\u003c\/div\u003e\n\u003cdiv\u003eF-150 Tremor Option #1 (as shipped)\u003c\/div\u003e\n\u003cdiv\u003e+1.50\" lift height over stock (unloaded)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eFeatures like tip inserts and leaf separators add to ride comfort, while a triple military wrapped front and rear half wrapped eyelet increases durability and strength of the leaf spring. A rebound leaf was added to reduce the axle wrap of the Raptor, which was another issue that has been found through ICON’s extensive testing. These features all combine for a ride that is night and day smoother on choppy trails, dirt roads, and even in the parking lot. No matter if it’s a spare tire, chase rack, a roof top tent, or more this ICON leaf spring is the perfect option for 2017-2020 Ford F150 Raptors looking to improve the ride quality and performance with a reliable and proven bolt-on solution.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eF-150 Tremor Option #2 (+20% spring rate over Option #1)\u003c\/div\u003e\n\u003cdiv\u003e+2.75\" lift height over stock (unloaded)\u003c\/div\u003e\n\u003cdiv\u003e+1.50\" lift height over stock w\/ 400lb constant load\u003c\/div\u003e\n\u003cdiv\u003eF-150 Tremor Option #3 (+40% spring rate over option #1)\u003c\/div\u003e\n\u003cdiv\u003e+3.50\" lift height over stock (unloaded)\u003c\/div\u003e\n\u003cdiv\u003e+1.00\" lift height over stock w\/ 850lb constant load\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eFurther expanding the product line up, these multi-rate leaf packs are also approved for fitment on all 2021-2023 Ford F-150 submodels besides Raptor with specific ICON 2.5 Aluminum Series rear shock absorbers, offering improved ride quality, increased rear wheel travel, and reduced axle wrap with the elimination of the factory rear blocks. Their customizable spring rates and lift heights makes for a great option for vehicles with taller lift heights or builds with increased static weight in the rear. Pairing them with the ICON 1” lowering shackles also allows for fine tuning of the truck’s rear ride height and fitment on a wide range of suspension setups.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eMULTI-RATE INFO 2017-2020 F-150 Raptor:\u003c\/div\u003e\n\u003cdiv\u003eRaptor Option #1 (as shipped)\u003c\/div\u003e\n\u003cdiv\u003e+1.00\" lift height over stock (unloaded)\u003c\/div\u003e\n\u003cdiv\u003eRaptor Option #2 (+20% spring rate over Option #1)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e3 user-adjustable spring rates for unique vehicle setups\u003c\/li\u003e\n\u003cli\u003eTriple military wrap front eyelet and rear half wrap for increased durability\u003c\/li\u003e\n\u003cli\u003eRebound leaf reduces severe axle wrap\u003c\/li\u003e\n\u003cli\u003eLeaf separators and tip inserts reduce noise and friction while increasing ride comfort\u003c\/li\u003e\n\u003cli\u003eDirect bolt-in to OEM spring location makes for an easy install\u003c\/li\u003e\n\u003cli\u003e“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2017-2020 Ford Raptor\u003c\/li\u003e\n\u003cli\u003e2021-2023 Ford F-150\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(1) ICON Multi Rate Leaf Pack Spring\u003c\/li\u003e\n\u003cli\u003e(1) Add In Leaf\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eAPPLICATION NOTE #166: If equipped with Dynamic Bending Headlamps and\/or OnBoard Scales part # 611081 is also required\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Hardware kit part number 95225H required for installation (sold separately)\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Compatible with factory shocks on 2017-2020 F-150 Raptor. 2021-2023 F-150 requires ICON rear shock absorbers part numbers 97721P, 97721CP, or 97721EP\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: 2017-2020 F-150 Raptor also requires bump stop spacer kit (PN: 95226) if ICON's hydraulic bump stop kit (PN: 95121) is not used\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Not compatible with some aftermarket leaf spring shackles. Stock or ICON 1\" lowering shackles are recommended. ICON 1\" Lowering Shackles, part number 91001, are recommended for most 2021-2023 F-150 applications unless taller lift heights are required\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Reduction in rear spring rate may reduce accuracy of OnBoard Scales, if equipped\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: These leaf springs are sold individually. A quantity of 2 are required per vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46000933142685,"sku":"198510","price":763.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_556d6b49-3c83-45bd-a6da-bb5e48ef4f30.jpg?v=1727288729"},{"product_id":"icon-2-5-lift-front-dual-rate-coil-spring-kit-for-20-22-ford-f-250-f-350-sd-4wd","title":"ICON 2.5\" Lift Front Dual Rate Coil Spring Kit For 20-22 Ford F-250\/F-350 SD 4WD","description":"\u003cp\u003e\u003cspan\u003eThe ICON Vehicle Dynamics 2020-2022 Ford F-250 and F-350 Super Duty 2.5\" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Ford Super Duty coil springs provide 2.5\" of lift height and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on-road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Caster correction cams are also included to ensure proper caster angle with the new, taller ride height. Like all ICON coil springs, they feature a lifetime guarantee against sagging\/breakage to produce confidence in knowing that you have the best suspension products available for the 2020-2022 Ford Super Duty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2.5\" lift height\u003c\/li\u003e\n\u003cli\u003eDual rate coil springs improve on and off-road ride quality over stock\u003c\/li\u003e\n\u003cli\u003eDual-stage, semi-gloss powder coat offers excellent corrosion resistance\u003c\/li\u003e\n\u003cli\u003eCaster cam kit included for ideal caster angles with ride height increase\u003c\/li\u003e\n\u003cli\u003e100% bolt-on system makes for an easy install\u003c\/li\u003e\n\u003cli\u003eLifetime warranty against sagging\/breakage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2020-2022 Ford F-250\/F-350 Super Duty 4WD Diesel\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) ICON 2.5\" Lift Front Dual Rate Coil Springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFactory Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Brake line kit (Part # 61111) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 5” Backspace \/ 6mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 5.25” Backspace \/ 6mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 20x9\" w\/ 5.25” Backspace \/ 6mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 35\" x 12.50\" (Larger tires may fit but fender trimming and modifications will be required.)\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Compatible with 4WD only\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Springs rates optimized for use with trucks with diesel engines\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Models equipped with Tremor package will have front lift height of 1.5\" over stock\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Not compatible with F-450 or F-550\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46001035477149,"sku":"62511","price":503.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_f50123d0-e14d-44f3-bb35-4019053f0a0d.png?v=1727290762"},{"product_id":"icon-multi-rate-rxt-leaf-spring-pack-w-add-in-leaf-for-2007-2021-toyota-tundra","title":"ICON Multi-Rate RXT Leaf Spring Pack w\/Add In Leaf For 2007-2021 Toyota Tundra","description":"\u003cp\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eTo take advantage of the additional travel that the RXT Rear Suspension System offers, ICON engineers had to scrap the OE leaf springs and develop a replacement that addressed issues found in the R\u0026amp;D process. The result is a user-adjustable multi-rate leaf pack that offers a major performance gain for almost every Tundra setup imaginable. Features like tip inserts and leaf separators reduce friction and increase ride comfort, while a military wrapped front eyelet improves the durability and strength of the leaf spring. To increase the ride quality of the truck and gain additional droop travel, the spring rate has been lowered slightly. While many Tundra owners will embrace this, there are those who have outfitted their trucks with a significant amount of weight in the form of a bed rack, roof top tent, spare tires and parts or other additions. Understanding this, the leaf pack was designed with an additional leaf (included with kit) that can be exchanged or added to the pack yielding an additional 15% or 25% in spring rate that will handle more \"outfitted\" vehicles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e3 user-adjustable spring rates for unique vehicle configurations\u003c\/li\u003e\n\u003cli\u003eMilitary wrap front eyelet for increased durability\u003c\/li\u003e\n\u003cli\u003eGalvanized leaf separators reduce friction and aid in corrosion resistance\u003c\/li\u003e\n\u003cli\u003eLeaf tip inserts reduce noise and increase ride comfort\u003c\/li\u003e\n\u003cli\u003eIncludes additional leaf with 15% or 25% increase in spring rate for more laden \"outfitted\" vehicles\u003c\/li\u003e\n\u003cli\u003ePotential for increased wheel travel when used with RXT shock (up to 25%) without sacrificing up-travel\u003c\/li\u003e\n\u003cli\u003e“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability\u003c\/li\u003e\n\u003cli\u003eDirect bolt-in to OEM spring location makes for an easy install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eFitment:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2007-2021 Toyota Tundra\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eICON Multi-Rate RXT Leaf Spring Pack\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdd In Leaf\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFor best results (and increased wheel travel), use in conjunction with ICON RXT rear shocks\u003c\/li\u003e\n\u003cli\u003eU-Bolt kit part # 52050 required for installation (sold separately)\u003c\/li\u003e\n\u003cli\u003eNot compatible with TRD rear sway bar kit\u003c\/li\u003e\n\u003cli\u003eThese leaf springs are sold individually. A quantity of 2 are required per vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46001079877789,"sku":"158509","price":476.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_64b8ca73-6946-4497-947b-33ee6813f3d9.png?v=1727292007"},{"product_id":"icon-3-lift-rear-dual-rate-coil-springs-for-03-24-toyota-fj-4runner-lexus-gx","title":"ICON 3\" Lift Rear Dual Rate Coil Springs For 03-24 Toyota FJ\/4Runner \u0026 Lexus GX","description":"\u003cp\u003e\u003cspan\u003eThe ICON Vehicle Dynamics Overland Series Rear Coil Spring Kit was developed for the expedition-style offroader who is loading down their vehicle with bumpers, winches, rooftop tents, and more. ICON engineers developed this multi-rate coil spring to provide compliant handling and the exceptional on and off-road ride quality you would expect from an ICON product. This coil spring kit will deliver 3\" of lift in an unloaded vehicle, and 2\" of lift when loaded down with a typical list of overland equipment. Like all ICOn coil springs, these springs are guaranteed for life not to sag or break.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 3\" of rear lift\u003c\/li\u003e\n\u003cli\u003eEasy install makes for a simple and cost effective upgrade\u003c\/li\u003e\n\u003cli\u003eMulti-rate coil allows for exceptional ride quality whether loaded down or empty\u003c\/li\u003e\n\u003cli\u003eGreat option for aggressive drivers as second rate will help reduce bottom-out\u003c\/li\u003e\n\u003cli\u003eICON engineered coil springs guaranteed for life against sagging and breaking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eFitment:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2003-2024 Toyota 4Runner\u003c\/li\u003e\n\u003cli\u003e2007-2014 Toyota FJ Cruiser\u003c\/li\u003e\n\u003cli\u003e2003-2023 Lexus GX\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) ICON Coil Springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eModels equipped with air ride rear suspension also require coil spring conversion kit, part number 56110\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46001097375901,"sku":"52800","price":360.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_5bf43a92-528b-4453-bc65-a7ab0df5d06c.png?v=1727293077"},{"product_id":"icon-stage-4-suspension-system-w-0-3-5-adjustable-lift-for-05-23-toyota-tacoma","title":"ICON Stage 4 Suspension System w\/ 0-3.5\" Adjustable Lift For 05-23 Toyota Tacoma","description":"\u003cdiv\u003eICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 4 system includes vehicle-specific tuned 2.5” Extended Travel coilover shocks featuring remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. When used with an ICON upper control arm, these extended travel coilovers add increased droop travel to the front suspension. The included ICON tubular upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the serviceable ICON Delta Joint allows for full bump and droop travel of the front suspension while eliminating bind. The included rear Add-A-Leaf Kit Installs in place of the factory overload leaves and effectively lowers the rear spring rate by approximately 10% for a more compliant ride while also providing 1.5\" of rear lift over stock. ICON 2.0 Aluminum Series Remote Reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2005-2023 Toyota Tacoma Stage 4 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThis system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased wheel travel and ride quality over stock\u003c\/li\u003e\n\u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint\u003c\/li\u003e\n\u003cli\u003e2.0 Aluminum Series remote reservoir rear shocks with 5\/8\" shafts\u003c\/li\u003e\n\u003cli\u003eAdd-A-Leaf Kit replaces OE overload leaf spring for more compliant ride quality and 1.5\" of rear lift\u003c\/li\u003e\n\u003cli\u003eVehicle specific tuned front and rear shocks for superior shock damping and control\u003c\/li\u003e\n\u003cli\u003e2.5 Series front coilovers with remote reservoirs for improved shock cooling and consistent performance under hard use\u003c\/li\u003e\n\u003cli\u003eAdjustable coilovers provide up to 3.5\" of front lift height on 2005-2015 models and up to 2.75\" on 2016-2023 models\u003c\/li\u003e\n\u003cli\u003eExtended Travel coilovers offer maximum wheel travel\u003c\/li\u003e\n\u003cli\u003e6061 aircraft grade aluminum CNC machined components\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" shafts\u003c\/li\u003e\n\u003cli\u003eFK Rod End bearings for extended longevity and minimal deflection\u003c\/li\u003e\n\u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2005-2015 Toyota Tacoma (0-3.5\" Lift)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2016-2023 Tacoma (0-2.75\" Lift)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(1) ICON Tubular UCA DJ Kit (58450DJ)\u003c\/li\u003e\n\u003cli\u003e(1) ICON 1.5\" Add-A-Leaf Kit (51100)\u003c\/li\u003e\n\u003cli\u003e(2) ICON 0-1.5\" Rear 2.0 VS RR (56503R)\u003c\/li\u003e\n\u003cli\u003e(1) ICON EXT Travel 2.5 VS RR Coilover Kit (58735)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Not compatible with 2005-2015 2WD 5-Lug Toyota Tacoma models\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: 2017-2023 Tacoma TRD Pro models will have front lift height range of 0-1.25\" over stock and rear lift height of 1\" over stock\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5 with 4.75” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9 with 5.00” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 20x9 with 5.00” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 33\" x 11.50\" (Larger tires may fit but fender trimming and modifications will be required.)\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #18: These systems are to be used with aftermarket upper control arms only\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #47: 700Lb\/In Expedition Coil available for heavier equipped vehicles\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #55: Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #109: 2016-2023 Tacoma llft range Is 0-2.75”\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #110: Trimming required for recommended tire size\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #111: Bump Stop Spacer Kit 51045 can be installed to increase preload .25” beyond maximum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46001163436189,"sku":"K53004T","price":3927.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_aacd6c4c-f647-4070-a4ea-8c077f9cdd18.png?v=1727295261"},{"product_id":"icon-2-5-lift-front-dual-rate-coil-spring-kit-for-2005-2019-ford-f-250-f-350-sd","title":"ICON 2.5\" Lift Front Dual Rate Coil Spring Kit For 2005-2019 Ford F-250\/F-350 SD","description":"\u003cp\u003e\u003cspan\u003eThe ICON Vehicle Dynamics 2005-2019 Ford F-250 \u0026amp; F-350 Super Duty 2.5\" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Ford Super Duty coil springs provide 2.5\" of lift height and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Caster correction cams are also included to ensure proper caster angle with the new, taller ride height. Like all ICON coil springs, they feature a lifetime guarantee against sagging\/breakage to produce confidence in knowing that you have the best suspension products available for the 2005-2019 Ford F-250 \u0026amp; F-350 Super Duty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2.5\" lift height\u003c\/li\u003e\n\u003cli\u003eDual rate coil springs improve on and off-road ride quality over stock\u003c\/li\u003e\n\u003cli\u003eDual-stage, semi-gloss powder coat offers excellent corrosion resistance\u003c\/li\u003e\n\u003cli\u003eCaster cam kit included for ideal caster angles with ride height increase\u003c\/li\u003e\n\u003cli\u003e100% bolt-on system makes for an easy install\u003c\/li\u003e\n\u003cli\u003eLifetime warranty against sagging\/breakage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2005-2019 Ford F-250\/F-350 Super Duty\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) CON 2.5\" Lift Front Dual Rate Coil Springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFactory Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 5.00” Backspace \/ 6mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 5.25” Backspace \/ 6mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 20x9\" w\/ 5.25” Backspace \/ 6mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 35\" x 12.50\" (Larger tires may fit but fender trimming and modifications will be required.)\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: 2005-2016 F-250s require 4” rear blocks with 15” U-bolt kit to sit level with 2.5” lifted front. ICON block kit part # 194275 and U-bolt kit part # 37003 (2005-2010 models) or part # 67003 (2011-2016 models) are recommended\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Springs rates optimized for use with trucks with diesel engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46001196794013,"sku":"62510","price":503.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_e6834111-673c-4f91-a21e-77823c430c75.png?v=1727296346"},{"product_id":"icon-vs-2-5-series-0-3-5-lift-coilover-kit-for-10-24-toyota-4runner-fj-lexus-gx","title":"ICON VS 2.5 Series 0-3.5\" Lift Coilover Kit For 10-24 Toyota 4Runner\/FJ\/Lexus GX","description":"\u003cp\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eICON Vehicle Dynamics V.S. 2.5 Series internal reservoir front coilover shocks are an incredible upgrade for the front end of the 2010-2024 Toyota 4Runner, 2010-2014 Toyota FJ Cruiser, and 2010-2023 Lexus GX460. These adjustable coilovers allow up to 0-3.5” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. Their extended travel shock length yields the maximum travel possible with aftermarket front upper control arms and ICON’s Vehicle-specific valving along with the larger 2.5” shock body and increased piston area over stock components provide superior ride quality and suspension performance both on- and off-road. When paired with ICON 2.0 or 2.5 Aluminum Series rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota 4Runner, FJ Cruiser or Lexus GX460.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eAdjustable coilovers yield 0-3.5\" of front lift height\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIncreased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExtended Travel length requires installation of aftermarket front upper control arms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuperior low speed control reduces body roll and increases on-road stability\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHigh quality ICON-engineered coil springs are guaranteed for life against sagging or breakage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCorrosion resistant CAD plated shock body with 7\/8\" shaft\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFK Rod End bearings provide extended longevity and minimal deflection\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFully serviceable design allows for revalves, rebuilds, and an immeasurable service life\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBolt-in design makes for an easy install into OEM shock location\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cb\u003eFitment:\u003c\/b\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e2010-2024 Toyota 4Runner\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e2010-2014 Toyota FJ Cruiser\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e2010-2023 Lexus GX460\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003eICON 0-3.5\" Lift VS 2.5 Series Extended Travel Coilover Kit Internal Reservoir\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan style=\"font-family: Arial; font-size: large;\"\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFactory Wheels \u0026amp; Tires Fitment: Yes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThese systems are to be used with aftermarket upper control arms only\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e700lb coil spring available for heavier equipped vehicles\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eShocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBump stop spacer kit available that can be installed to increase threads showing beyond max recommendation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5 w\/ 4.75\" Backspace \/ 0mm Offset\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9 w\/ 5\" Backspace \/ 0mm Offset\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRecommended Aftermarket Wheels: ICON Alloys - 20x9 w\/ 5\" Backspace \/ 0mm Offset\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRecommended Aftermarket Tires: 33\" x 11.50\" (Larger Tires May Fit but Fender Trimming and Modifications will be Required)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46003079086237,"sku":"58647","price":1594.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_ad506490-93dc-49b2-a893-176c302a18c7.png?v=1727354019"},{"product_id":"icon-0-1-5-lift-rear-2-0-vs-remote-reservoir-shocks-for-96-04-toyota-tacoma-4wd","title":"ICON 0-1.5\" Lift Rear 2.0 VS Remote Reservoir Shocks For 96-04 Toyota Tacoma 4WD","description":"\u003cp\u003e\u003cspan\u003eICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePremium grade 5WT shock oil for consistent suspension damping along a wide temperature range\u003c\/li\u003e\n\u003cli\u003eNitrogen charged monotube design with remote reservoir\u003c\/li\u003e\n\u003cli\u003eOne piece linear\/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road\u003c\/li\u003e\n\u003cli\u003e5\/8” chrome plated hardened steel shaft resists corrosion and pits\u003c\/li\u003e\n\u003cli\u003e6061 aluminum rod end, top cap, and internals ensure strength and durability\u003c\/li\u003e\n\u003cli\u003ePolyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment\u003c\/li\u003e\n\u003cli\u003eApplication-specific reservoir mounting hardware\u003c\/li\u003e\n\u003cli\u003e6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance\u003c\/li\u003e\n\u003cli\u003eNitrile rubber top out bumper for noise free operation\u003c\/li\u003e\n\u003cli\u003e100% rebuildable\u003c\/li\u003e\n\u003cli\u003e100% revalveable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e1996-04 Toyota Tacoma 4WD\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Icon 0-1.5\" Lift Rear 2.0 VS Remote Reservoir Shocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned To Work With 0-1.5\" Lift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46003230671005,"sku":"(2) 56502R","price":648.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_ae3ea16d-454f-408c-90b1-40b1b02b48b6.jpg?v=1727355827"},{"product_id":"icon-0-3-5-lift-stage-2-suspension-system-for-10-24-toyota-4runner-fj-cruiser","title":"ICON 0-3.5\" Lift Stage 2 Suspension System For 10-24 Toyota 4Runner\/FJ Cruiser","description":"\u003cdiv\u003eICON Vehicle Dynamics 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. This Stage 2 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable for 0-3.5” of front lift over stock, allowing the use of larger, more aggressive wheel and tire combinations. Their extended travel length improves performance by increasing front wheel travel and require the addition of ICON front upper control arms. Tubular Delta Joint upper control arms not only add strength and durability, but help retain factory alignment specs, increasing caster over stock and allow proper wheel alignment at the lift height this system provides. ICON rear coil springs deliver on-road comfort and superior off-road performance with 2” of rear lift height over stock for a level stance front to rear. ICON 2.0 Aluminum Series internal reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser Stage 2 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThis system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased wheel travel and ride quality over stock\u003c\/li\u003e\n\u003cli\u003eBolt-on system means no cutting or welding necessary for install\u003c\/li\u003e\n\u003cli\u003eVehicle specific tuned front and rear shocks for superior shock damping and control\u003c\/li\u003e\n\u003cli\u003eAdjustable coilovers provide 0-3.5\" of front lift height\u003c\/li\u003e\n\u003cli\u003eExtended Travel coilovers matched with ICON UCA provides increased front droop travel\u003c\/li\u003e\n\u003cli\u003eTubular upper control arms for added strength, durability, and improved alignment geometry\u003c\/li\u003e\n\u003cli\u003e6061 aircraft grade aluminum CNC machined components\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant CAD plated coilover shock body with 7\/8\" shaft\u003c\/li\u003e\n\u003cli\u003eFK Rod End bearings for extended longevity and minimal deflection\u003c\/li\u003e\n\u003cli\u003e2.0 Aluminum Series rear internal reservoir shocks with 5\/8\" shafts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2010-2024 Toyota 4Runner\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2010-2014 Toyota FJ Cruiser\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded: \u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 1-3\" Rear 2.0 VS IR (56505)\u003c\/li\u003e\n\u003cli\u003e(1) EXT Travel 2.5 VS IR Coilover Kit (58647)\u003c\/li\u003e\n\u003cli\u003e(1) Tubular UCA DJ Kit (58451DJ)\u003c\/li\u003e\n\u003cli\u003e(1) Rear 2\" Spring Kit (52700)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #102: KDSS equipped require rear track bar 54200\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #111: Bump stop spacer kit available that can be installed to increase threads showing beyond max recommendation\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #18: These systems are to be used with aftermarket upper control arms only\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #30: An adjustable track bar is recommended to realign the axle but not required\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #47: 700lb\/in Expedition Coil available for heavier equipped vehicles\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #55: Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 4.75” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 5.00” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 20x9\" w\/ 5.00” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 33\" x 11.50\" (Larger tires may fit but fender trimming and modifications will be required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46003375014045,"sku":"K53062T","price":3183.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_589cea5a-8cc8-4b6b-8c39-06a69097a8c6.png?v=1727358238"},{"product_id":"icon-2-5-vs-extended-travel-coilovers-internal-reservoir-for-05-23-toyota-tacoma","title":"ICON 2.5 VS Extended Travel Coilovers Internal Reservoir For 05-23 Toyota Tacoma","description":"\u003cp\u003e\u003cspan\u003eICON Vehicle Dynamics V.S. 2.5 Series internal reservoir front coilover shocks are an incredible upgrade for the front end of the 2005-2023 Toyota Tacoma. These adjustable coilovers allow up to 0-3.5” of lift height adjustability on 2005-2015 models or 0-2.75” of lift height adjustability on 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Their extended travel length allows for more wheel travel but also requires the installation of aftermarket front upper control arms. When paired with ICON 2.0 or 2.5 Aluminum Series rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tacoma\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHeight-adjustable coilovers offer 0-3.5\" or 0-2.75\" of lift height adjustment depending on year model\u003c\/li\u003e\n\u003cli\u003eIncreased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use\u003c\/li\u003e\n\u003cli\u003eExtended Travel length requires installation of aftermarket front upper control arms\u003c\/li\u003e\n\u003cli\u003eSuperior low speed control reduces body roll and increases on-road stability\u003c\/li\u003e\n\u003cli\u003eHigh quality ICON-engineered coil springs are guaranteed for life against sagging or breakage\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant CAD plated shock body with 7\/8\" diameter shaft\u003c\/li\u003e\n\u003cli\u003eFK Rod End bearings provide extended longevity and minimal deflection\u003c\/li\u003e\n\u003cli\u003eFully serviceable design allows for revalves, rebuilds, and an immeasurable service life\u003c\/li\u003e\n\u003cli\u003eBolt-in design makes for an easy install into OEM shock location\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2005-2023 Toyota Tacoma\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) ICON 2.5 VS Extended Travel Coilovers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Will not fit 2005-2015 2WD 5-Lug Toyota Tacoma models\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: 2005-2015 Toyota Tacoma will have front lift height range of 0-3.5\" over stock\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: 2017-2023 Tacoma TRD Pro models will have front lift height range of 0-1.25\" over stock\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #18: These systems are to be used with aftermarket upper control arms only\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #110: Trimming Required For Recommended Tire Size\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #111: Bump Stop Spacer Kit 51045 Can Be Installed To Increase Preload .25” Beyond Maximum\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #47: 700Lb\/In Expedition Coil Available For Heavier Equipped Vehicles\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #55: Shocks Are Fully Serviceable. Coilover Heights Indicated Are For A Stock Equipped Vehicle\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #109: 2016-2023 Tacoma Lift Range Is 0-2.75”\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5 with 4.75” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9 with 5.00” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 20x9 with 5.00” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 33\" x 11.50\" (Larger tires may fit but fender trimming and modifications will be required.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46003403063453,"sku":"58635","price":1594.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_04a717ee-b2c8-4c2a-ad6c-4460c593915b.png?v=1727359589"},{"product_id":"icon-0-3-5-lift-stage-3-suspension-kit-tubular-uca-for-2005-2023-toyota-tacoma","title":"ICON 0-3.5\" Lift Stage 3 Suspension Kit Tubular UCA For 2005-2023 Toyota Tacoma","description":"\u003cdiv\u003eICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 3 system includes vehicle-specific tuned 2.5” Extended Travel coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-2023 models, allowing the use of larger, more aggressive wheel and tire combinations. When used with an ICON upper control arm, these extended travel coilovers add increased droop travel to the front suspension. The included ICON tubular upper control arm kit is designed to improve the overall performance of the Toyota Tacoma with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the serviceable ICON Delta Joint allows for full bump and droop travel of the front suspension while eliminating bind. The included rear Add-A-Leaf Kit Installs in place of the factory overload leaves and effectively lowers the rear spring rate by approximately 10% for a more compliant ride while also providing 1.5\" of rear lift over stock. ICON 2.0 Aluminum Series Remote Reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2005-2023 Toyota Tacoma Stage 3 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThis system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased wheel travel and ride quality over stock\u003c\/li\u003e\n\u003cli\u003e2.0 Aluminum Series remote reservoir rear shocks with 5\/8\" shafts\u003c\/li\u003e\n\u003cli\u003eAdd-A-Leaf Kit replaces OE overload leaf spring for more compliant ride quality and 1.5\" of rear lift\u003c\/li\u003e\n\u003cli\u003eVehicle specific tuned front and rear shocks for superior shock damping and control\u003c\/li\u003e\n\u003cli\u003eAdjustable coilovers provide up to 3.5\" of front lift height on 2005-2015 models and up to 2.75\" on 2016-2023 models\u003c\/li\u003e\n\u003cli\u003eExtended Travel coilovers offer maximum wheel travel\u003c\/li\u003e\n\u003cli\u003e6061 aircraft grade aluminum CNC machined components\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" shafts\u003c\/li\u003e\n\u003cli\u003eFK Rod End bearings for extended longevity and minimal deflection\u003c\/li\u003e\n\u003cli\u003eTubular UCAs for added strength, durability, and alignment correction for better drivability\u003c\/li\u003e\n\u003cli\u003eUCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2005-2015 Toyota Tacoma (0-3.5\" Lift)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2016-2023 Toyota Tacoma ( 0-2.75\" Lift)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Add-A-Leaf Kit - 51100 \u003c\/li\u003e\n\u003cli\u003e(1) VS IR Coilover Kit - 58635 \u003c\/li\u003e\n\u003cli\u003e(1) Tubular UCA DJ Kit - 58450DJ\u003c\/li\u003e\n\u003cli\u003e(2) Rear 2.0 VV RR - 56503R \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Not compatible with 2005-2015 2WD 5-Lug Toyota Tacoma models\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: 2017-2023 Tacoma TRD Pro models will have front lift height range of 0-1.25\" over stock and rear lift height of 1\" over stock\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #110: Trimming required for recommended tire size\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #111: Bump Stop Spacer Kit 51045 can be installed to increase preload .25” beyond maximum\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #18: These systems are to be used with aftermarket upper control arms only\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #47: 700Lb\/In Expedition Coil available for heavier equipped vehicles\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #55: Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #109: 2016-2023 Tacoma Llft range Is 0-2.75”\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5 with 4.75” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9 with 5.00” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 20x9 with 5.00” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 33\" x 11.50\" (Larger tires may fit but fender trimming and modifications will be required.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46003486883997,"sku":"K53003T","price":3419.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_68b9fd70-b69b-4c90-9979-705602b9c36f.png?v=1727362269"},{"product_id":"icon-heavy-duty-0-3-5-lift-stage-2-suspension-system-for-05-23-toyota-tacoma","title":"ICON Heavy Duty 0-3.5\" Lift Stage 2 Suspension System For 05-23 Toyota Tacoma","description":"\u003cp\u003e\u003cspan\u003eICON Vehicle Dynamics Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. The Stage 2 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” of lift on 2005-2015 or 0-2.75” on 2016-2023 models allowing the use of larger, more aggressive wheel and tire combinations. Remote reservoir ICON 2.0 Aluminum Series rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The included rear Add-A-Leaf Kit Installs in place of the factory overload leaves and effectively lowers the rear spring rate by approximately 10% for a more compliant ride while also providing 1.5\" of rear lift over stock. The ICON Vehicle Dynamics 2005-2023 Toyota Tacoma Stage 2 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased wheel travel and ride quality over stock\u003c\/li\u003e\n\u003cli\u003eSimple, bolt-on installation\u003c\/li\u003e\n\u003cli\u003eVehicle specific tuned front and rear shocks for superior shock damping and control\u003c\/li\u003e\n\u003cli\u003eAdjustable coilovers provide up to 3.5\" of front lift height on 2005-2015 models and up to 2.75\" on 2016-2023 models\u003c\/li\u003e\n\u003cli\u003e6061 aircraft grade aluminum CNC machined components\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant CAD plated coilover shock bodies with 7\/8\" shafts\u003c\/li\u003e\n\u003cli\u003eFK Rod End bearings for extended longevity and minimal deflection\u003c\/li\u003e\n\u003cli\u003eICON engineered coil springs\u003c\/li\u003e\n\u003cli\u003e2.0 Aluminum Series remote reservoir rear shocks with 5\/8\" shafts\u003c\/li\u003e\n\u003cli\u003eAdd-A-Leaf Kit replaces OE overload leaf spring for more compliant ride quality and 1.5\" of rear lift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2005-2015 Toyota Tacoma (0-3.5\" Lift)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2016-2023 Tacoma Tacoma (0-2.75\" Lift)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Add-A-Leaf Kit - 51100 \u003c\/li\u003e\n\u003cli\u003e(1) 2.5 VS IR Coilover Kit - 58630 \u003c\/li\u003e\n\u003cli\u003e(2) Rear 2.0 VS RR - 56503R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Not compatible with 2005-2015 2WD 5-Lug Toyota Tacoma models\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: 2017-2023 Tacoma TRD Pro models will have front lift height range of 0-1.25\" over stock and rear lift height of 1\" over stock\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #111: Bump Stop Spacer Kit 51045 can be installed to increase preload .25” beyond maximum\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #47: 700Lb\/In Expedition Coil available for heavier equipped vehicles\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #55: Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #109: 2016-2023 Tacoma Llft range Is 0-2.75”\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #110: Trimming required for recommended tire size\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5 with 4.75” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9 with 5.00” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 20x9 with 5.00” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 33\" x 11.50\" (Larger tires may fit but fender trimming and modifications will be required.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46003515162781,"sku":"K53002","price":2527.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_b8639c72-57a1-4515-b583-41ee8dbaa127.png?v=1727363428"},{"product_id":"icon-1-5-3-lift-rear-2-0-aluminum-series-shock-kit-for-2005-2023-toyota-tacoma","title":"ICON 1.5-3\" Lift Rear 2.0 Aluminum Series Shock Kit For 2005-2023 Toyota Tacoma","description":"\u003cp\u003e\u003cspan\u003eICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off-road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eNitrogen charged monotube design with remote reservoir\u003c\/li\u003e\n\u003cli\u003e100% revalveable\u003c\/li\u003e\n\u003cli\u003eOne piece linear\/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road\u003c\/li\u003e\n\u003cli\u003e5\/8” chrome plated hardened steel shaft resists corrosion and pits\u003c\/li\u003e\n\u003cli\u003e6061 aluminum rod end, top cap, and internals ensure strength and durability\u003c\/li\u003e\n\u003cli\u003ePolyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment\u003c\/li\u003e\n\u003cli\u003eApplication-specific reservoir mounting hardware\u003c\/li\u003e\n\u003cli\u003e6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance\u003c\/li\u003e\n\u003cli\u003eNitrile rubber top out bumper for noise free operation\u003c\/li\u003e\n\u003cli\u003e100% rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2005-2023 Toyota Tacoma (1.5-3\" Lift)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Rear 2.0 Aluminum Series Remote Reservoir Shocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eWill not fit 2005-2015 5-Lug 2WD Toyota Tacoma\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBumpstop height must be increase my minimum of .75\" or damage to shocks and\/or shock mounts may occur\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46003550290077,"sku":"(2) 56515R","price":648.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/2_26ab7168-e01c-4601-9c1b-178dc8ce3ead.png?v=1727364832"},{"product_id":"icon-billet-upper-control-arms-w-delta-joints-for-22-23-toyota-tundra-sequoia","title":"ICON Billet Upper Control Arms w\/ Delta Joints For 22-23 Toyota Tundra\/Sequoia","description":"\u003cdiv\u003eThis ICON billet aluminum upper control arm kit is designed to improve the overall performance of the 2022-2023 Toyota Tundra\/2023 Toyota Sequoia with corrected front-end geometry, increased camber and caster adjustment, and improved suspension component clearance. Constructed of CNC machined 6061 billet aluminum utilizing a hybrid H-beam cross-section that is light-weight and resists bending forces better than tubular arms. Replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. FK Rod End 3\/4” heim joints provide precise and smooth function throughout the range of travel while ICON’s signature double adjuster sleeve allows for on-vehicle camber and caster adjustment. Included with all components and hardware necessary for a complete install, these billet UCAs are the perfect front end upgrade for the 2022-2023 Toyota Tundra or 2023 Toyota Sequoia.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eICON suspension components with the all-new Delta Joint PRO represent the state of the art in off-road performance and durability. Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of factory style ball joints with performance and strength that exceeds traditional motorsports-style ball joints. The Delta Joint PRO features a new rebuildable, serviceable design in which any component may be removed, inspected and replaced without having to purchase a whole new joint. Strength and durability are improved by using a larger ball with 56% more bearing surface than our standard Delta Joint, along with improved lubrication sealing. But improved performance is at the heart of the Delta Joint PRO, with a full 90 degrees of articulation, from one extreme to the other. This represents a 14% improvement in range of motion, over the highly capable original Delta Joint, allowing for maximum bind-free suspension movement through the complete range of travel. The Delta Joint PRO is built to take the abuse, with a chromoly ball and shaft that has a bearing surface hardened to Rockwell C 55. The replaceable races are made of graphite-impregnated sintered metal, machined to the finest tolerance to provide a flawless, metal-to-metal bearing interface. We also redesigned the lubrication system, with lubricant channels that distribute grease more efficiently without extending past the bearing seal.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined 6061 billet aluminum construction with satin anodized finish\u003c\/li\u003e\n\u003cli\u003eCorrects suspension geometry and allows for proper wheel alignment on Tundras with up to 3” of lift\u003c\/li\u003e\n\u003cli\u003eQuick, precise, on-vehicle adjustment for both caster and camber\u003c\/li\u003e\n\u003cli\u003eDelta Joint PRO allows maximum articulation without binding\u003c\/li\u003e\n\u003cli\u003eDelta Joint PRO is 100% serviceable and rebuildable\u003c\/li\u003e\n\u003cli\u003eFK Rod Ends at chassis pivots for strength and precision driving characteristics\u003c\/li\u003e\n\u003cli\u003eBuilt in O-ring sealed dust cover cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2022-2023 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e2023 Toyota Sequoia\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eICON Billet Upper Control Arms w\/Delta Joint Pro Kit\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFactory Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17\" x 8.5\" with 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 35\" x 12.50\"\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Compatible with 2022-2023 Tundra without TRD Sport Package equipped with 0-3.5” of front lift over stock\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Compatible with 2022-2023 Tundra with TRD Sport Package equipped with 0-4.5” of front lift over stock\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Compatible with 2022-2023 Tundra TRD Pro equipped with 0-1.75” of front lift over stock\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Compatible with ICON 2022-2023 Tundra 6\" Lift Performance Suspension System but NOT compatible with 6\" lift kits from other manufacturers\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Compatible with 2023 Sequoia equipped with 0-4.5” of front lift over stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46003626606749,"sku":"58561DJ","price":1511.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_4b62753e-e0c1-44b2-8f3b-d64c04008b76.png?v=1727366327"},{"product_id":"icon-rear-1-25-inch-lift-triple-rate-coil-spring-kit-for-2022-2023-toyota-tundra","title":"ICON Rear 1.25 Inch Lift Triple Rate Coil Spring Kit For 2022-2023 Toyota Tundra","description":"\u003cp\u003e\u003cspan\u003eICON Triple Rate rear coil springs for 22-23 Tundra provides a modest increase in ground clearance while greatly enhancing on- and off-road performance, especially when used with ICON shocks and suspension components. The triple-rate coil design gives a softer droop and ride rates with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Specifically designed to net .75\" of rear lift on a Tundra equipped with a TRD suspension Package or 1.25\" of rear lift on a non-TRD Tundra desiring taller rear ride heights. Like all ICON coil springs, they feature a lifetime guarantee against sagging\/breakage to produce confidence in knowing that you have the best suspension products available for the 22-23 Tundra.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eVehicle specific design to yield more lift on a Tundra equipped with TRD suspension packages\u003c\/li\u003e\n\u003cli\u003e.75\" rear lift height over stock on TRD models\u003c\/li\u003e\n\u003cli\u003e1.25\" rear lift height over stock on non-TRD models\u003c\/li\u003e\n\u003cli\u003eTriple rate rear coil springs with ICON-engineered droop, ride, and overload rates\u003c\/li\u003e\n\u003cli\u003eSignificantly improves on- and off-road ride quality and performance over stock\u003c\/li\u003e\n\u003cli\u003eDual stage powder coating for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee against sagging\/breakage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2022-2023 Toyota Tundra\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Rear 1.25\" Lift Triple Rate Coil Springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: 17x8.5\" w\/ 5.75” Backspace \/ 25mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 35\" x 12.50\" (Minor fender trimming and modifications may be required)\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Provides .75\" of rear lift on a Tundra equipped with TRD Off-Road or TRD Sport suspension packages and TRD Pro. A Tundra without TRD Off-Road or TRD Sport suspension packages will net 1.25\" of rear lift. If less lift is desired, consider ICON Part # 51210\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #85: Advertised Lift Height Ranges Are For A Stock Equipped Vehicle. Increasing Weight Of Vehicle Due To Accessories Will Alter Lift Range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46003858899101,"sku":"51211","price":426.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_788c2def-3293-4a55-be10-a5f1b56df756.png?v=1727372620"},{"product_id":"icon-upper-control-arms-with-delta-joint-kit-for-2007-2022-toyota-tundra-sequoia","title":"ICON Upper Control Arms With Delta Joint Kit For 2007-2022 Toyota Tundra\/Sequoia","description":"\u003cp\u003e\u003cspan\u003eTake the performance of your 2007-2021 Toyota Tundra or 2008-2022 Toyota Sequoia to new levels with the ICON Vehicle Dynamics Delta Joint tubular upper control arm kit. All ICON tubular upper control arms are constructed from CNC bent 1026 DOM steel tubing and then powder coated to a semi-gloss black finish for maximum strength and corrosion resistance. ICON upper control arms are engineered with built-in caster correction for optimal alignment specifications and confidence inspiring handling. A main benefit of ICON upper control arms is the potential for increased wheel travel when paired with our 2.5 or 3.0 series coilovers, this translates into superior performance and ride quality for your 2007-2021 Toyota Tundra. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eICON Delta Joint\u003c\/li\u003e\n\u003cli\u003e1026 DOM Steel Construction\u003c\/li\u003e\n\u003cli\u003eCNC Bent Tubing\u003c\/li\u003e\n\u003cli\u003eServiceable Dual Stage Bushings\u003c\/li\u003e\n\u003cli\u003eCNC Machined Bushing Housings and Sleeves\u003c\/li\u003e\n\u003cli\u003eBuilt-In Caster Correction\u003c\/li\u003e\n\u003cli\u003eBlack Semi-Gloss Powder Coat Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2007-2021 Toyota Tundra\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2008-2022 Toyota Sequoia\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) ICON Upper Control Arms\u003c\/li\u003e\n\u003cli\u003eDelta Joint Kit\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFactory Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 5.75” Backspace \/ 25mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 6.00” Backspace \/ 25mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 20x9\" w\/ 5.625” Backspace \/ 16mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 35\" x 12.50\"\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #110: Trimming required for recommended tire size\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: NOT compatible with all subframe-drop lift kits or aftermarket spindles\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Geometry optimized for 1-3\" of front lift over stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46003894681757,"sku":"58460DJ","price":923.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_657336b6-2ecd-4694-991d-66af1307d11c.png?v=1727374296"},{"product_id":"icon-2-0-aluminum-series-0-3-lift-rear-shocks-for-22-24-toyota-tundra-sequoia","title":"ICON 2.0 Aluminum Series 0-3\" Lift Rear Shocks For 22-24 Toyota Tundra\/Sequoia","description":"\u003cp\u003eICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are fully rebuildable and re-tunable. For those using their vehicle in extreme off-road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePremium grade 5WT shock oil for consistent suspension damping along a wide\u003c\/li\u003e\n\u003cli\u003etemperature range\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNitrogen charged monotube design with remote reservoir\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOne piece linear\/digressive piston design with vehicle specific valving for\u003c\/li\u003e\n\u003cli\u003eunsurpassed performance and ride quality on and off-road\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e5\/8” chrome plated hardened steel shaft resists corrosion and pits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e6061 aluminum rod end, top cap, and internals ensure strength and durability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePolyurethane bushings, zinc plated sleeves, and forged steel mounting stems for\u003c\/li\u003e\n\u003cli\u003eOE factory type fitment\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e6063 anodized aluminum body and reservoir tubing for superb heat dissipation,\u003c\/li\u003e\n\u003cli\u003eexcellent corrosion resistance, and high-tech appearance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNitrile rubber top out bumper for noise free operation\u003c\/li\u003e\n\u003cli\u003eFully rebuildable and re-tunable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2022-2024 Toyota Tundra (0-1.5\" Lift)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2023-2024 Toyota Sequoia (0-3\" Lift)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Icon VS 2.0 Aluminum Series Shocks\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with 0-1.5” of rear lift on non-TRD Tundras or 0-1\" lift on TRD\u003c\/li\u003e\n\u003cli\u003eTundras equipped with rear coil springs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible with 0-3” of rear lift on Tundras equipped with rear OE Load-leveling\u003c\/li\u003e\n\u003cli\u003eRear Height Control Air Suspension\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible with 0-3” of rear lift on non-TRD Sequoias or 0-1\" lift on TRD Sequoias\u003cbr\u003eIf upgrading a vehicle equipped with Adaptive Variable Suspension (AVS) all other vehicle systems remain function\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46004001144989,"sku":"(2) 56516R","price":648.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/2_9da9a6e1-bdf6-4e3b-a8c4-a8d27d8dd829.png?v=1727376293"},{"product_id":"icon-upper-control-arms-w-delta-joint-kit-for-1996-2004-toyota-tacoma-4runner","title":"ICON Upper Control Arms w\/Delta Joint Kit For 1996-2004 Toyota Tacoma\/4Runner","description":"\u003cp\u003e\u003cspan\u003eThrough hours of in-house research and thousands of miles of real world testing, ICON engineers have identified the limiting factors of the 1996-2004 Toyota Tacoma and 1996-2002 Toyota 4Runner OEM upper control arms and developed a kit to address these limits. Like all ICON tubular upper control arms, these are constructed from CNC bent 1026 DOM steel tubing and then powder coated to a semi-gloss black finish for maximum strength and corrosion resistance. These arms are engineered with built-in geometry correction for optimal alignment specifications and increased caster for confidence inspiring handling. The robust, two piece steel taper adapter clamps from both sides of the spindle to distribute the extreme forces seen during aggressive off-road driving while CNC machining provides a precise, OE style fit for the Delta Joint taper pin. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eDirect bolt-in design makes for a simple and straightforward installation\u003c\/li\u003e\n\u003cli\u003eDelta Joint upper control arms carry ICON's exclusive 5 year limited warranty when used in a complete ICON suspension system\u003c\/li\u003e\n\u003cli\u003ePatented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball\u003c\/li\u003e\n\u003cli\u003eCNC machined steel taper adapter\u003c\/li\u003e\n\u003cli\u003e1026 DOM steel construction\u003c\/li\u003e\n\u003cli\u003eCNC bent and notched tubing\u003c\/li\u003e\n\u003cli\u003eServiceable dual stage bushings\u003c\/li\u003e\n\u003cli\u003eCNC machined bushing housings and sleeves\u003c\/li\u003e\n\u003cli\u003eBuilt-In caster correction\u003c\/li\u003e\n\u003cli\u003eBlack semi-gloss powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e1996-2004 Toyota Tacoma\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1996-2002 Toyota 4Runner\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) ICON Upper Control Arms\u003c\/li\u003e\n\u003cli\u003eDelta Joint Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5 with 4.75” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 33\" x 11.50\" (Larger tires may fit but fender trimming and modifications will be required.)\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: DOES NOT FIT 5 LUG TACOMA MODELS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46004047773853,"sku":"58400DJ","price":892.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_220cb5e5-016e-4681-ab69-e48b24d0aa0a.png?v=1727377802"},{"product_id":"icon-steel-rear-lower-trailing-arm-kit-for-03-24-toyota-fj-land-4runner-lexus-gx","title":"ICON Steel Rear Lower Trailing Arm Kit For 03-24 Toyota FJ\/Land\/4Runner\/Lexus GX","description":"\u003cp\u003e\u003cspan\u003eICON’s tubular steel rear lower link arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These components are made from CNC machined and notched 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This rear lower link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustability and also utilize a multi durometer bushing that allows for noise free operation and maximum angularity without the need for periodic greasing and\/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. ICON’s engineering team has also gone a step further in the development of these products by incorporating features such as a tangent lower link barrel design that allows for easier sliding over off-road obstacles, and offsetting the front pivots of the lower link for improved roll steer geometry. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined \u0026amp; notched 1026 DOM steel construction\u003c\/li\u003e\n\u003cli\u003eFabricated components covered under ICON's lifetime warranty\u003c\/li\u003e\n\u003cli\u003eMulti durometer bushing for noise free operation and maximum angularity\u003c\/li\u003e\n\u003cli\u003eNo grease required for life of bushings\u003c\/li\u003e\n\u003cli\u003eQuality JM16T PTFE-lined FK Rod Ends\u003c\/li\u003e\n\u003cli\u003eAdjustable for various lift heights \u0026amp; driveline angles\u003c\/li\u003e\n\u003cli\u003eOffset lower link front pivots improve roll steer\u003c\/li\u003e\n\u003cli\u003eTangent lower link barrel design reduces risk of off-road hangups\u003c\/li\u003e\n\u003cli\u003eIntegrated OEM emergency brake bracket mount\u003c\/li\u003e\n\u003cli\u003eICON1K tested in extreme off-road conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2007-2014 Toyota FJ Cruiser\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2003-2024 Toyota 4Runner\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2008-2021 Toyota Land Cruiser 200 Series\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2003-2023 Lexus GX\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) ICON Tubular Steel Rear Lower Trailing Arms\u003c\/li\u003e\n\u003cli\u003eAll Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eDirect Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46004133331101,"sku":"54000T","price":635.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_bab06de0-5c97-45d2-ba56-bd9995eb9f4d.png?v=1727380354"},{"product_id":"icon-0-3-5-lift-stage-3-suspension-kit-for-2010-2024-toyota-4runner-fj-cruiser","title":"ICON 0-3.5\" Lift Stage 3 Suspension Kit For 2010-2024 Toyota 4Runner\/FJ Cruiser","description":"\u003cdiv\u003eICON Vehicle Dynamics 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. This Stage 3 system includes vehicle-specific tuned 2.5” coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable for 0-3.5” of front lift over stock, allowing the use of larger, more aggressive wheel and tire combinations. Their extended travel length improves performance by increasing front wheel travel and require the addition of ICON front upper control arms. Tubular Delta Joint upper control arms not only add strength and durability, but help retain factory alignment specs, increasing caster over stock and allow proper wheel alignment at the lift height this system provides. ICON's tubular steel lower links are much stronger than the OE units, feature a low maintenance multi-durometer bushing, and can be adjusted for optimum pinion angle. ICON rear coil springs deliver on-road comfort and superior off-road performance with 2” of rear lift height over stock for a level stance front to rear. ICON 2.0 Aluminum Series internal reservoir rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser Stage 3 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThis system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased wheel travel and ride quality over stock\u003c\/li\u003e\n\u003cli\u003e2.0 Aluminum Series rear internal reservoir shocks with 5\/8\" shafts\u003c\/li\u003e\n\u003cli\u003eBolt-on system means no cutting or welding necessary for install\u003c\/li\u003e\n\u003cli\u003eVehicle specific tuned front and rear shocks for superior shock damping and control\u003c\/li\u003e\n\u003cli\u003eAdjustable coilovers provide 0-3.5\" of front lift height\u003c\/li\u003e\n\u003cli\u003eExtended Travel coilovers matched with ICON UCA provides increased front droop travel\u003c\/li\u003e\n\u003cli\u003eTubular upper control arms for added strength, durability, and improved alignment geometry\u003c\/li\u003e\n\u003cli\u003eTubular rear lower links offer increased strength, improved geometry, and pinion angle adjustment\u003c\/li\u003e\n\u003cli\u003e6061 aircraft grade aluminum CNC machined components\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant CAD plated coilover shock body with 7\/8\" shaft\u003c\/li\u003e\n\u003cli\u003eFK Rod End bearings for extended longevity and minimal deflection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2010-2024 Toyota 4Runner\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2010-2014 Toyota FJ Cruiser\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(1) EXT Travel 2.5 VS IR Coilover Kit - 58647 \u003c\/li\u003e\n\u003cli\u003e(1) Rear 2\" Spring Kit - 52700\u003c\/li\u003e\n\u003cli\u003e(1) Tubular UCA DJ Kit - 58451DJ\u003c\/li\u003e\n\u003cli\u003e(2) 1-3\" Rear 2.0 VS IR - 56505\u003c\/li\u003e\n\u003cli\u003e(1) Tubular Lower Trailing Arm Kit - 54000T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 4.75” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 5.00” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 20x9\" w\/ 5.00” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 33\" x 11.50\" (Larger tires may fit but fender trimming and modifications will be required.)\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #18: These systems are to be used with aftermarket upper control arms only\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #30: An adjustable track bar is recommended to realign the axle but not required\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #47: 700lb\/in Expedition Coil available for heavier equipped vehicles\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #55: Shocks are fully serviceable. Coilover heights indicated are for a stock equipped vehicle\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #102: KDSS equipped require rear track bar 54200\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #111: Bump stop spacer kit available that can be installed to increase threads showing beyond max recommendation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46004169277597,"sku":"K53063T","price":3818.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_b8a62b9b-a560-4b09-8a55-b2f2aa398654.png?v=1727381776"},{"product_id":"icon-heavy-duty-0-3-5-lift-stage-3-suspension-system-for-2010-2023-lexus-gx460","title":"ICON Heavy Duty 0-3.5\" Lift Stage 3 Suspension System For 2010-2023 Lexus GX460","description":"\u003cdiv\u003eThe Stage 3 system includes vehicle-specific tuned, extended travel 2.5” coilover shocks with internal reservoirs paired with tubular steel Delta Joint upper control arms. This combination allows for extended wheel travel and geometry correction for more precise wheel alignment. The coilovers are also height adjustable from 0-3.5” of lift over stock, allowing the use of larger, more aggressive wheel and tire combinations. ICON 2” lift rear coil springs paired with 2.0 Aluminum Series internal reservoir rear shocks utilizing vehicle-specific valving balance the performance of the truck from front to rear. ICON's tubular steel rear lower links are much stronger than the OE units, feature a low maintenance multi-durometer bushing, and can be adjusted for optimum pinion angle. On top of it all, these links have been designed to provide correct roll steer geometry for the best possible handling on and off-road. An adjustable rear track bar is also included for KDSS compatibility that also helps correct rear end alignment. The ICON Vehicle Dynamics 2010-UP Lexus GX460 Stage 4 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThis system features upper control arms with ICON's patented Delta Joint. The Delta Joint is a heavy-duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased wheel travel and ride quality over stock\u003c\/li\u003e\n\u003cli\u003e2.0 Aluminum Series rear IFP shocks with 5\/8\" shafts\u003c\/li\u003e\n\u003cli\u003eIncluded adjustable rear track bar ensures KDSS compatibility\u003c\/li\u003e\n\u003cli\u003eBolt-on system means no cutting or welding necessary for install\u003c\/li\u003e\n\u003cli\u003eVehicle specific tuned front and rear shocks for superior shock damping and control\u003c\/li\u003e\n\u003cli\u003eAdjustable coilovers provide 0-3.5\" of lift height\u003c\/li\u003e\n\u003cli\u003eICON upper control arms allow for additional wheel travel (when paired with extended travel coilovers) while improving suspension geometry for predictable handling\u003c\/li\u003e\n\u003cli\u003ePatented Delta Joint (U.S. Pat. 10,731,700) combines the durability and weather resistance of a ball joint with the performance characteristics of a uniball\u003c\/li\u003e\n\u003cli\u003eTubular rear lower links offer increased strength, improved geometry, and pinion angle adjustment\u003c\/li\u003e\n\u003cli\u003e6061 aircraft grade aluminum CNC machined components\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant CAD plated coilover shock body with 7\/8\" shaft\u003c\/li\u003e\n\u003cli\u003eFK Rod End bearings for extended longevity and minimal deflection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2010-2023 Lexus GX460\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Tubular UCA DJ Kit - 58451DJ\u003c\/li\u003e\n\u003cli\u003e(1) Tubular Lower Trailing Arm Kit - 54000T\u003c\/li\u003e\n\u003cli\u003e(1) EXT Travel 2.5 VS IR Coilover Kit - 58647\u003c\/li\u003e\n\u003cli\u003e(1) Rear 2\" Spring Kit - 52700\u003c\/li\u003e\n\u003cli\u003e(1) Rear ADJ Track Bar Kit - 54200\u003c\/li\u003e\n\u003cli\u003e(2) 1-3\" Rear 2.0 VS IR - 56505 \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eNote:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFactory Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eShips in multiple boxes\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 4.75” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 5.00” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 20x9\" w\/ 5.00” Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 33\" x 11.50\" (Larger Tires May Fit but Fender Trimming and Modifications will be Required)\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #33: Gx460 Models Equipped With Factory Rear Air Ride Suspension Require ICON Rear Coil Conversion Kit #56110\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #35: Remote Reservoir Mounting Brackets May Interfere With Aftermarket Bumper Mounts \/ Windshield Washer Bottles\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #46: Suspension System Compatible With Kdss. Front Sway Bar Relocation Brackets Not Used For Kdss Equipped Vehicles. Certain Years Require Trimming For Front Reservoir Bracket Fitment\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #47: 700Lb Coil Spring Available For Heavier Equipped Vehicles\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #55: Shocks Are Fully Serviceable. Coilover Heights Indicated Are For A Stock Equipped Vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46004218069149,"sku":"K53183T","price":4241.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_b4d56be3-1ead-4c7e-863e-c561694084b5.png?v=1727383863"},{"product_id":"icon-4-5-lift-front-dual-rate-coil-spring-kit-for-05-19-ford-f-250-f-350-sd-4wd","title":"ICON 4.5” Lift Front Dual Rate Coil Spring Kit For 05-19 Ford F-250\/F-350 SD 4WD","description":"\u003cp\u003e\u003cspan\u003eThe ICON Vehicle Dynamics 2005-2019 Ford F-250 \u0026amp; F-350 Super Duty 4.5\" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Ford Super Duty coil springs provide 4.5\" of lift height and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging\/breakage to produce confidence in knowing that you have the best suspension products available for the 2005-2019 Ford F-250 \u0026amp; F-350 Super Duty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e4.5\" lift height\u003c\/li\u003e\n\u003cli\u003eDual rate coil springs improve on and off-road ride quality over stock\u003c\/li\u003e\n\u003cli\u003eDual-stage, semi-gloss powder coat offers excellent corrosion resistance\u003c\/li\u003e\n\u003cli\u003e100% bolt-on system makes for an easy install\u003c\/li\u003e\n\u003cli\u003eLifetime warranty against sagging\/breakage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2005-2019 Ford F-250\/F-350 Super Duty 4WD Diesel\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) ICON 4.5” Lift Front Dual Rate Coil Springs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFactory Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 5.00” Backspace \/ 6mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 5.25” Backspace \/ 6mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 20x9\" w\/ 5.25” Backspace \/ 6mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 37\" x 12.50\" (Larger tires may fit but fender trimming and modifications will be required.)\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Springs rates optimized for use with trucks with diesel engines\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Brake line kit (Part # 61110) is optional on 2017-2019 models for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46005934882973,"sku":"64010","price":367.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_1c7bdfcd-2e02-4a02-82bd-ce645cb38d11.png?v=1727439950"},{"product_id":"icon-front-billet-gold-upper-control-arms-w-delta-joint-for-2024-toyota-tacoma","title":"ICON Front Billet Gold Upper Control Arms w\/ Delta Joint For 2024 Toyota Tacoma","description":"\u003cdiv\u003eThis ICON billet aluminum upper control arm kit is designed to improve the overall performance of the 2024 Toyota Tacoma with corrected front-end geometry, increased camber and caster adjustment, and improved suspension component clearance. Constructed of CNC machined 6061 billet aluminum utilizing a hybrid H-beam cross-section that is light-weight and resists bending forces better than tubular arms. Replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind. FK Rod End 3\/4” Heim joints provide precise and smooth function throughout the range of travel while ICON’s signature double adjuster sleeve allows for on-vehicle camber and caster adjustment. An all-new gold anodized finish matches ICON shock absorbers for a splash of color in the wheel well and provide a custom look to any build. Included with all components and hardware necessary for a complete install, these billet UCAs are the perfect front end upgrade for your 2024 Toyota Tacoma.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eICON suspension components with the all-new Delta Joint PRO represent the state of the art in off-road performance and durability. Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of factory style ball joints with performance and strength that exceeds traditional motorsports-style ball joints. The Delta Joint PRO features a new rebuildable, serviceable design in which any component may be removed, inspected and replaced without having to purchase a whole new joint. Strength and durability are improved by using a larger ball with 56% more bearing surface than our standard Delta Joint, along with improved lubrication sealing. But improved performance is at the heart of the Delta Joint PRO, with a full 90 degrees of articulation, from one extreme to the other. This represents a 14% improvement in range of motion, over the highly capable original Delta Joint, allowing for maximum bind-free suspension movement through the complete range of travel. The Delta Joint PRO is built to take the abuse, with a chromoly ball and shaft that has a bearing surface hardened to Rockwell C 55. The replaceable races are made of graphite-impregnated sintered metal, machined to the finest tolerance to provide a flawless, metal-to-metal bearing interface. We also redesigned the lubrication system, with lubricant channels that distribute grease more efficiently without extending past the bearing seal.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined 6061 billet aluminum construction\u003c\/li\u003e\n\u003cli\u003eGold anodized finish\u003c\/li\u003e\n\u003cli\u003eCorrects suspension geometry and allows for proper wheel alignment on Tacomas with up to 3” of lift\u003c\/li\u003e\n\u003cli\u003eQuick, precise, on-vehicle adjustment for both caster and camber\u003c\/li\u003e\n\u003cli\u003eDelta Joint PRO allows maximum articulation without binding\u003c\/li\u003e\n\u003cli\u003eDelta Joint PRO is 100% serviceable and rebuildable\u003c\/li\u003e\n\u003cli\u003eFK Rod Ends at chassis pivots for strength and precision driving characteristics\u003c\/li\u003e\n\u003cli\u003eBuilt in O-ring sealed dust cover cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2024 Toyota Tacoma\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) ICON Front Billet Gold Upper Control Arms\u003c\/li\u003e\n\u003cli\u003eDelta Joint Kit\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFactory Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17\" x 8.5\" with 5.75\" Backspace \/ 25mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18\" x 9\" with 6\" Backspace \/ 25mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 33\" x 11.50\" (Larger tires may fit but fender trimming and modifications will be required.)\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Compatible with 2024 Tacoma equipped with 0-3” of front lift over stock\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Also available with classic satin silver anodized finish. See part number 58552DJ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46006040232093,"sku":"58552GDJ","price":1553.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/3_300cbe48-e5e5-42fa-b8cf-2a5cbdf8b6bf.png?v=1727441189"},{"product_id":"icon-5-2-5-lift-adjustment-collar-front-leveling-kit-for-2021-2023-ford-raptor","title":"ICON .5-2.5\" Lift Adjustment Collar Front Leveling Kit For 2021-2023 Ford Raptor","description":"\u003cp\u003e\u003cspan\u003eThe ICON Attitude Adjustment Collar (AAC) is an industry first, patent pending multi-height coil spring collar that works in conjunction with a top load shim that can be configured in five unique ways to yield .5” to 2.5” of front lift height over stock. Taking the front-end dimensions of the \"Gen 3\" Raptor into account, the collar and shim design of this leveling system achieves this range of lift height while keeping the OE shock in the ride zone, maintaining factory ride quality. Other options on the market achieve lift height solely through coil preload, which places the shock in the rebound zone at ride height and drastically impacts ride quality and performance. Installation of this leveling system requires no disassembly of the shock, making it a simple and straightforward process as opposed to other options currently available. CNC machined 6061 billet aluminum construction and a black anodized finish mean this product can stand up to the test of time in the harshest on and off-road conditions. Backed by ICON’s limited lifetime warranty, the ICON Vehicle Dynamics Attitude Adjustment Collar is the best leveling solution on the market for the 2021-2023 Ford Raptor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eKeeps OE shock in the ride zone, maintaining factory ride quality\u003c\/li\u003e\n\u003cli\u003eMulti-height design can yield 5 different heights from 0.5” to 2.50” of front lift over stock\u003c\/li\u003e\n\u003cli\u003eFeatures mounting holes for Live Valve wire harnesses\u003c\/li\u003e\n\u003cli\u003eDoes not require disassembly of the shock for installation\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061 billet aluminum construction\u003c\/li\u003e\n\u003cli\u003eBlack anodized finish for corrosion resistance and great looks\u003c\/li\u003e\n\u003cli\u003eLifetime guarantee against component breakage or manufacturer defect\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2021-2023 Ford Raptor\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e ICON Attitude Adjustment Collar Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys | 17x8.5 w\/ 5.00\" BS \/ 6mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 35\" x 12.50\" (Larger Tires May Fit but Fender Trimming and Modifications will be Required)\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Ride height sensor recalibration recommended\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Not compatible with Raptors equipped with Raptor 37 Performance Package\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46006135160989,"sku":"IVD6135B","price":436.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_40cd0629-d83c-4817-80a7-a7269cd022e0.png?v=1727442486"},{"product_id":"icon-ball-joint-kit-for-05-23-toyota-tacoma-tundra-sequoia-nissan-titan-gm-1500","title":"ICON Ball Joint Kit For 05-23 Toyota Tacoma\/Tundra\/Sequoia\/Nissan Titan\/GM 1500","description":"\u003cp\u003e\u003cspan\u003eICON’s Delta Joint is a heavy-duty high-angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint’s zinc plated housing provides the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greaseable design increase the longevity of the Delta Joint while also allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and capable of greater angularity than a typical ball joint.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Delta Joint (U.S. Pat. 10,731,700) combines the durability of a ball joint with the performance characteristics of a traditional uniball\u003c\/li\u003e\n\u003cli\u003eSealed design and zinc plated housing protects Delta Joint from the elements, road salts, and other debris\u003c\/li\u003e\n\u003cli\u003eMetal on metal internals and a greaseable design for maximum longevity and noise-free operation\u003c\/li\u003e\n\u003cli\u003eCapable of high angularity required for lifted applications\u003c\/li\u003e\n\u003cli\u003eCarburized taper pin provides increased corrosion resistance, decreased internal friction, and less chance of thread galling on assembly\u003c\/li\u003e\n\u003cli\u003ePullout strength greater than comparable industry standard uniball\u003c\/li\u003e\n\u003cli\u003eApplication specific taper pins for precise fit across a wide range of vehicles\u003c\/li\u003e\n\u003cli\u003e5 Year ICON Limited Warranty (When used with ICON Vehicle Dynamics suspension components, visit www.iconvehicledynamics.com\/deltajoint for more info)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2005-2023 Toyota Tacoma\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2007-2021 Toyota Tundra\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2008-2022 Toyota Sequoia\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2016-2023 Nissan Titan XD\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2019-2023 Chevrolet Silverado 1500\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2019-2023 GMC Sierra 1500\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Delta Ball Joints\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eRequires ICON front upper control arms. Will not fit other brands of UCAs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46006327902365,"sku":"614550","price":296.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_0c3f48c4-228c-4fd9-b385-9141d4d7817c.png?v=1727445962"},{"product_id":"icon-upper-control-arm-delta-joint-pro-kit-for-2022-2024-toyota-tundra-sequoia","title":"ICON Upper Control Arm Delta Joint Pro Kit For 2022-2024 Toyota Tundra\/Sequoia","description":"\u003cp\u003eICON suspension components with the all-new Delta Joint PRO represent the state of the art in off-road performance and durability. Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of factory style ball joints with performance and strength that exceeds traditional motorsports-style ball joints. The Delta Joint PRO features a new rebuildable, serviceable design in which any component may be removed, inspected and replaced without having to purchase a whole new joint. Strength and durability are improved by using a larger ball with 56% more bearing surface than our standard Delta Joint, along with improved lubrication sealing. But improved performance is at the heart of the Delta Joint PRO, with a full 90 degrees of articulation, from one extreme to the other. This represents a 14% improvement in range of motion, over the highly capable original Delta Joint, allowing for maximum bind-free suspension movement through the complete range of travel. The Delta Joint PRO is built to take the abuse, with a chromoly ball and shaft that has a bearing surface hardened to Rockwell C 55. The replaceable races are made of graphite-impregnated sintered metal, machined to the finest tolerance to provide a flawless, metal-to-metal bearing interface. We also redesigned the lubrication system, with lubricant channels that distribute grease more efficiently without extending past the bearing seal.\u003c\/p\u003e\n\u003cp\u003eCompatible with the following suspension setups:\u003c\/p\u003e\n\u003cp\u003e2022-2024 Tundra without TRD Sport Package equipped with 2-3.5” of front lift over stock\u003cbr\u003e2022-2024 Tundra with TRD Sport Package equipped with 3-4.5” of front lift over stock\u003cbr\u003e2022-2024 Tundra TRD Pro equipped with 0-1.75” of front lift over stock\u003cbr\u003e2022-2024 Tundra ICON 6\" Lift Performance Suspension System but NOT compatible with 6\" lift kits from other manufacturers\u003cbr\u003e2023-2024 non-TRD Sequoia equipped with 1.75-4.5” of front lift over stock\u003cbr\u003e2023-2024 TRD Sequoia equipped with 0-2.5” of front lift over stock\u003c\/p\u003e\n\u003cp\u003eFactory Wheels \u0026amp; Tires Fitment: Yes\u003cbr\u003eRecommended Aftermarket Wheels: ICON Alloys - 17\" x 8.5\" with 5.75\" Backspace \/ 25mm Offset\u003cbr\u003eRecommended Aftermarket Tires: 35\" x 12.50\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt in added caster for better handling on lifted vehicles\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDelta Joint PRO allows maximum articulation without binding\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDelta Joint PRO is 100% serviceable and rebuildable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eServiceable dual stage pivot bushings\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCNC machined housings for bushings and Delta Joint PRO\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1026 DOM tube construction with black powder coat finish\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncludes billet dust caps for Delta Joint PRO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControl Arm Material: DOM Steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl Arm Construction: Tubular\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBall Joint Included: Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBushings Included: Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBall Joint Mounting Type: Press In\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBall Joint Stud Type: Threaded\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReinforced: Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuspension Grade Type: Performance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 35\" x 12.50\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: 17x8.5\" with 5.75” Backspace \/ 25mm Offset\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePre-Greased: No\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBushing Material: Polyurethane\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGrease Fitting Included: Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMounting Hardware Included: Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdjustable: No\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFinish: Powdercoat\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eControl Arm Color: Black\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBushing Color: Black\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuspension Type: Spring\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eQuantity: Pair\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnd 1 Type: Bushing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnd 2 Type: Ball Joint\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCalifornia Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdjustable Control Arm: No\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMounting Bracket Included: No\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConstruction: Tubular\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2022-2024 Toyota Tundra\u003c\/li\u003e\n\u003cli\u003e2023-2024 Toyota Sequoia\u003cbr\u003e                  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) ICON Upper Control Arms w\/ Delta Joint Pro\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46006375678109,"sku":"58461DJ","price":923.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/Screenshot2024-09-27094853.png?v=1727447766"},{"product_id":"icon-delta-ball-joint-kit-for-2001-2023-gmc-chevy-1500-2500-3500-ford-f-150","title":"ICON Delta Ball Joint Kit For 2001-2023 GMC\/Chevy 1500\/2500\/3500 \u0026 Ford F-150","description":"\u003cp\u003e\u003cspan\u003eICON’s Delta Joint is more robust than a uniball and capable of greater angularity than a typical ball joint. Its metal-on-metal construction and a greaseable design increases longevity while also allowing for noise-free operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003ePatented Delta Joint (U.S. Pat. 10,731,700) combines the durability of a ball joint with the performance characteristics of a traditional uniball\u003c\/li\u003e\n\u003cli\u003eSealed design and zinc plated housing protects Delta Joint from the elements, road salts, and other debris\u003c\/li\u003e\n\u003cli\u003eMetal on metal internals and a greasable design for maximum longevity and noise-free operation\u003c\/li\u003e\n\u003cli\u003eCapable of high angularity required for lifted applications\u003c\/li\u003e\n\u003cli\u003eCarburized taper pin provides increased corrosion resistance, decreased internal friction, and less chance of thread galling on assembly\u003c\/li\u003e\n\u003cli\u003ePullout strength greater than comparable industry standard uniball\u003c\/li\u003e\n\u003cli\u003eApplication specific taper pins for precise fit across a wide range of vehicles\u003c\/li\u003e\n\u003cli\u003e5 Year ICON Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2014-2016 GMC Sierra 1500\u003c\/li\u003e\n\u003cli\u003e2001-2022 GMC Sierra 2500\/3500\u003c\/li\u003e\n\u003cli\u003e2015-2022 GMC Canyon\u003c\/li\u003e\n\u003cli\u003e2014-2018 Chevrolet Silverado 1500\u003c\/li\u003e\n\u003cli\u003e2001-2022 Chevrolet Silverado 2500\/3500\u003c\/li\u003e\n\u003cli\u003e2015-2022 Chevrolet Colorado\u003c\/li\u003e\n\u003cli\u003e2020-2023 Ford F-150\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\n\u003cb\u003eIncluded\u003c\/b\u003e:\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) ICON Delta Ball Joints\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e Not compatible with Colorado ZR2\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlso compatible with 2019 Chevrolet Silverado 1500 LD and 2019 GMC Sierra 1500 Limited equipped with ICON UCA kit part # 78600 or 78600DJ\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNot compatible with F-150 Raptor or F-150 Tremor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46006442688669,"sku":"614555","price":306.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_b35f4c23-9462-407e-907a-dfdcd10b5ed2.png?v=1727449174"},{"product_id":"icon-625-2-125-lift-front-aluminum-coilover-spacer-kit-for-21-23-ram-1500-trx","title":"ICON .625-2.125\" Lift Front Aluminum Coilover Spacer Kit For 21-23 Ram 1500 TRX","description":"\u003cp\u003e\u003cspan\u003eThe ICON 2021-2023 Ram 1500 TRX Lift Spacer’s modular design allows for an increased ride height of .625”-2.125\" to provide fitment of larger, more agressive wheel and tire combinations and does not require disassembly of the OE coilovers for installation. The 2021-203 Ram 1500 TRX Lift Spacer is a vehicle specific design formulated to work with existing OE components and maintains active damping system functionality. Made from CNC machined billet aluminum with an anodized black finish for the perfect sleek look and precise fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased ride height (.625-2.125” over stock)\u003c\/li\u003e\n\u003cli\u003eModular design allowing for three different ride heights\u003c\/li\u003e\n\u003cli\u003eDoes not require disassembly of the shock for installation\u003c\/li\u003e\n\u003cli\u003eVehicle specific design\u003c\/li\u003e\n\u003cli\u003eCNC machined aluminum components\u003c\/li\u003e\n\u003cli\u003eBlack anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2021-2023 Ram 1500 TRX\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eICON Front Coilover Spacer Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003c\/li\u003e\n\u003cli\u003eOnly fits 2021-2023 Ram 1500 TRX models\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 20x9\" w\/ 5\" Backspace \/ 0mm Offset\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 35\" x 12.50\" (Larger tires may fit but fender trimming and modifications will be required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46006456746141,"sku":"IVD2122","price":303.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_f6bc5412-20db-4b1e-809e-9ecf1b9883de.png?v=1727450515"},{"product_id":"icon-tubular-upper-control-arms-w-delta-joint-pro-kit-for-2021-2023-ford-bronco","title":"ICON Tubular Upper Control Arms w\/ Delta Joint Pro Kit For 2021-2023 Ford Bronco","description":"\u003cp\u003e\u003cspan\u003eThese tubular steel upper control arms free up your 2021-2023 Ford Bronco's front suspension movement to allow maximum travel for performance shocks and coilovers at an easier price point compared to our range-topping billet components. Additional caster is built in to correct geometry to allow for better front-end alignment on lifted Broncos. The all-new Delta Joint PRO provides a host of durability and performance improvements compared to our standard Delta Joints, including up to 90° of free articulation to maximize suspension travel without bind. It’s also larger and fully rebuildable. The Delta Joint PRO’s grease fitting is protected by an anodized billet aluminum dust cap, included with the kit. Serviceable Heavy Duty Dual Stage bushings at the frame pivots are greaseable and rebuildable, and fit into precision machined bushing housings to ensure a responsive driving experience. ICON Tubular Upper Control Arms are constructed of heavy-wall DOM tubing, CNC formed and fixture welded before receiving our multi-stage black powder coat finish. Strength and durability are improved by using a larger ball with 56% more bearing surface than our standard Delta Joint, along with improved lubrication sealing. But improved performance is at the heart of the Delta Joint PRO, with a full 90 degrees of articulation, from one extreme to the other. This represents a 14% improvement in range of motion, over the highly capable original Delta Joint, allowing for maximum bind-free suspension movement through the complete range of travel. The Delta Joint PRO is built to take the abuse, with a chromoly ball and shaft that has a bearing surface hardened to Rockwell C 55. The replaceable races are made of graphite-impregnated sintered metal, machined to the finest tolerance to provide a flawless, metal-to-metal bearing interface. We also redesigned the lubrication system, with lubricant channels that distribute grease more efficiently without extending past the bearing seal.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt in added caster for better handling on lifted vehicles\u003c\/li\u003e\n\u003cli\u003eDelta Joint PRO allows maximum articulation without binding\u003c\/li\u003e\n\u003cli\u003eDelta Joint PRO is 100% serviceable and rebuildable\u003c\/li\u003e\n\u003cli\u003eServiceable dual stage pivot bushings\u003c\/li\u003e\n\u003cli\u003eCNC machined housings for bushings and Delta Joint PRO\u003c\/li\u003e\n\u003cli\u003e1026 DOM tube construction with black powder coat finish\u003c\/li\u003e\n\u003cli\u003eIncludes billet dust caps for Delta Joint PRO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cb\u003eFitment:\u003c\/b\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e2021-2023 Ford Bronco\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eIncluded:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e(2) ICON Upper Control Arms\u003c\/li\u003e\n\u003cli\u003eDelta Joint Pro Kit\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cb\u003eNote:\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFactory Wheels \u0026amp; Tires Fitment\u003c\/li\u003e\n\u003cli\u003eNot compatible with Bronco Raptor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46006499082397,"sku":"48400DJ","price":923.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/1_b26f798e-0666-4b44-8a8b-126d349fdaad.png?v=1727451724"},{"product_id":"icon-1-3-lift-stage-1-suspension-kit-for-2007-2018-gm-silverado-sierra-1500","title":"ICON 1-3\" Lift Stage 1 Suspension Kit For 2007-2018 GM Silverado\/Sierra 1500","description":"\u003cp\u003eICON Vehicle Dynamics 2007-2018 GM Silverado\/Sierra 1500 suspension systems are designed to dramatically increase the on and off-road ride quality. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. With wheel travel and ride quality in mind, ICON engineers researched each component of the GM platform’s suspension and addressed any areas where performance could be extracted. The Stage 1 system includes vehicle-specific tuned 2.5 coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 1-3” allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series monotube rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics GM Silverado\/Sierra 1500 Stage 1 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2WD and 4WD models\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncreased wheel travel and ride quality over stock with no change in towing capacity\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVehicle specific tuned front and rear shocks for superior shock damping and control\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdjustable coilovers allow for f 1-3\" of front lift height over stock\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e6061 Aircraft grade aluminum CNC machined components\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant CAD plated coilover shock body with 7\/8\" shaft\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh strength alloy CNC machined lower bar pin\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFK rod end bearings for extended longevity and minimal deflection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2.0 Aluminum Series rear IFP shocks with 5\/8\" shock shafts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTech Info:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Wheels \u0026amp; Tires Fitment: Yes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 17x8.5\" w\/ 4.75” Backspace \/ 0mm Offset\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 18x9\" w\/ 5.00” Backspace \/ 0mm Offset\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Wheels: ICON Alloys - 20x9\" w\/ 5.00” Backspace \/ 0mm Offset\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRecommended Aftermarket Tires: 33\" x 11.50\" (Larger tires may fit but fender trimming and modifications will be required.)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #48: Slight Modifications To Factory Shock Mounts May Be Required\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #55: Shocks Are Fully Serviceable. Coilover Heights Indicated Are For A Stock Equipped Vehicle\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAPPLICATION NOTE #83: Trimming Of The Upper Control Arm Stop Required Or Down Travel Will Be Limited By Upper Arm Stop\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Not compatible with models equipped Magnetic Ride Control\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Included rear shocks are compatible with 0-2\" of rear lift on most models\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTECH NOTE: Not recommended for Hybrid models\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eShips in multiple boxes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2007-2018 Chevrolet Silverado 1500\u003c\/li\u003e\n\u003cli\u003e2007-2018 GMC Sierra 1500                  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Front 2.5 VS IR Coilover Kit\u003c\/li\u003e\n\u003cli\u003e(2) Rear 2.0 VS IR Shocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Icon Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":46006506782877,"sku":"K73001","price":2333.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/files\/K73001.png?v=1727451864"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0645\/2504\/1821\/collections\/Icon_Vehicle_Dynamics.png?v=1761144983","url":"https:\/\/rudysdiesel.com\/collections\/icon-vehicle-dynamics.oembed","provider":"Rudy's Performance Parts","version":"1.0","type":"link"}