Home - Return to Previous Page
Additional Images

BDS 4" Lift Kit With Fox 2.0 Series Shocks For 19-20 Chevy/GMC 1500 4WD Silverado & Sierra

748FS
Pricing: $2,211.93

Customize Your Item

CA Prop 65
Qty:
FREE Ground Shipping

Description

BDS 4" Lift Kit With Fox 2.0 Series Shocks For 2019-2020 Chevy Silverado 1500 & GMC Sierra 1500

 

Specially designed to offer improved offroad capability while maintaining on-road handling and comfort, these new 4" IFS system are FMVSS 126 (ESC System) compliant, improve ground clearance and allow more wheel fitment options than any other kit on the market.

 

At the heart of this BDS 4" IFS system are a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the 3-piece heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility while also allowing a wider range of wheel fitment options to include factory 20" wheels. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS's multipoint relocation bracket system tying into the frame and control arm pockets to further secure the front differential to keep CV axle angles at a minimum. Additional ride height on this particular kit comes from a set of top mounted steel fabricated strut spacers to mount onto the factory strut assemblies. A pair of BDS-branded sway bar drop brackets used to correct the operating angle of the factory sway bar as well as created a strong brace between the rear crossmember and the frame. Also supplied are new lower control arm cam bolts to allow alignment and a weld-in frame reinforcement plate for extra strength. In the rear 2" lift blocks and longer u-bolts lift and level the stance and your choice of NX2 gas or FOX 2.0 performance series gas shocks are supplied to round out this kit allowing room for up to 35" tires to be installed.

 

Kit Includes:

Qty Part# Description
1 011316 2019 Chevy/GM 1500 Rear Box Kit - 4"
1 021405 2019 Chevy/GM 4" Strut Spacer Box
1 021680 2019-20 GM 1500 Knuckle Box 1of2
1 021681 2019-20 GM 1500 Knuckle Box 2of2
1 021682 2019-20 GM 1500 6in Front Box Kit 1of2
1 021683 2019-20 GM 1500 6in Front Box Kit 2of2
2 98224758 Fox 2.0 Shock 27.95 x 17.35 x 2- EB1/EB1

 

Fox 2.0 Series Shocks:

  • Fox 2.0 performance series shocks have been tuned and tested by both Fox and BDS Suspension to maximize performance specific to each application and to every BDS Suspension system. The basic shock design is based on proven Fox Racing Shox race products, but re-designed to maximize the ride quality, handling, and control of your BDS equipped truck or jeep, whether on or off the road.

 


Tire & Wheel Combinations:

  • 35"x12.50 w/20x9/22x9 and 5.5 - 6.25" back spacing
  • 33"x12.50 w/20x9/22x9 and 4.5 - 6.25" back spacing
  • 33"x12.50 w/17x8/17x9/18x9 and 4.5" back spacing
  • For additional tire & wheel combinations refer to the instruction sheet
  • Trimming may be required

 

Notes: 

  • Requires frame bracket modification
  • Estimated Installation Time Is 8 hours
  • Will NOT fit MagneRide / Adaptive Ride equipped models
  • Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference, stock 20" wheels can be reinstalled.
  • 17" Wheels with 4.5" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle / tie rod.
  • All aftermarket wheels should be test fit prior to mounting the tire to ensure proper clearance to the brake caliper. Some wheel profiles will not clear the brake caliper. These can be test fitted before the vehicle is lifted in a stock condition.
  • Will NOT work with TrailBoss or AT4 models.
  • Will NOT work with 2019 1500 Classic models.
  • Front skid plate will not work with 2.7L Turbo Engines.

 

Details

Shipping Information

  • Item Requires Shipping
  • 276.0 lbs.
  • FREE Ground Shipping

Documents

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.