Home - Return to Previous Page
Additional Images

Banks Power Monster RAM Intake Elbow For 2007.5-2018 Dodge/Ram 2500/3500 Diesel

Pricing: $660.00

FREE Ground Shipping


 Monster-Ram improves airflow from the intercooler. Flows 936 cfm (71.5 lbs/min) Banks High-Flow Heater and Billet Intake Plate compared to Stock's 421 cfm (32.16 lbs/min). Flows 520 cfm (39.72 lbs/min), with the stock heater plate. Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications. 

Although the Monster-Ram dramatically increases airflow using the stock heater plate, upgrading to Banks High-Flow Heater and Billet Intake Plate improves the performance 5x. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.

Utilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction. With four 1/8” NPT ports, perfect for temperature and pressure sensors, the sky's the limit for data acquisition and expandability. Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor. Add the Banks High-Flow Heater Plate and it beats the competition by over 10x.



  • Made in USA
  • 3-3/8 inch inlet
  • Red powder coat finish
  • Four 1/8 inch NPT ports
  • Quicker throttle response
  • Outflows stock over 122%
  • Accommodates stock mounting points
  • Optimizes air pressure and distribution
  • Larger and less restrictive than stock intake
  • Improves flow of oxygen-rich air into cylinders
  • Raises boost without increasing turbine drive pressure
  • Includes proprietary fuel line and all necessary hardware
  • Also available as a kit with High-Flow Heater and Billet Intake Plate



  • 2007.5-2018 Dodge Ram 2500/3500 Cummins 6.7 Diesel



  • Emissions equipment must be retained
  • Accommodates emissions equipment for 50-State compliance
  • Add the Banks High-Flow Heater and Billet Intake Plate for optimal power (2007.5-2012 use P/N 42800) (2013-2018 use P/N 42803)
  • The stock horn has quite a boost loss at the same flow, so now with a better flowing horn virtually all the boost produced by the turbos can get to the valves


  • 42793-PC
  • 42793-PC
  • Banks Power
  • New

Shipping Information

  • Item Requires Shipping
  • 14.0 lbs.
  • W8.5000” x H8.5000” x L14.5000”
  • FREE Ground Shipping

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.