MSD Ignition SKU 7564-HC
MSD High-Current Solid-State Relay 35Ax4 Red 4-Channel 140 Amp PWM
MSD High-Current Solid-State Relay 35Ax4 Red 4-Channel 140 Amp PWM - Picture 1 of 5
MSD High-Current Solid-State Relay 35Ax4 Red 4-Channel 140 Amp PWM - Picture 2 of 5
MSD High-Current Solid-State Relay 35Ax4 Red 4-Channel 140 Amp PWM - Picture 3 of 5
MSD High-Current Solid-State Relay 35Ax4 Red 4-Channel 140 Amp PWM - Picture 4 of 5
MSD High-Current Solid-State Relay 35Ax4 Red 4-Channel 140 Amp PWM - Picture 5 of 5
MSD Ignition SKU 7564-HC

MSD High-Current Solid-State Relay 35Ax4 Red 4-Channel 140 Amp PWM

$206.95
$206.95
$230.95
SAVE $24.00

Free ground shipping on all orders over $99

Get Real Advice & HelpCall 866-757-6537 · M–F, 8am–5pm
MSD High-Current Solid-State Relay 35Ax4 Red 4-Channel 140 Amp PWM - Picture 1 of 5

MSD High-Current Solid-State Relay 35Ax4 Red 4-Channel 140 Amp PWM

$230.95 $206.95

MSD High-Current Solid-State Relay 35Ax4 Red 4-Channel 140 Amp PWM

$230.95 $206.95

The MSD High-Current Solid-State Relay Block cleans up your wiring by replacing four standard relays with one compact module, with four independent 35 amp channels for a combined 140 amps of continuous current.

 

FOUR RELAYS IN ONE BLOCK

This high current module takes the place of four standard relays and eliminates unsightly wiring, controlling electric fans, water pumps, nitrous solenoids, auxiliary lighting, and any other accessory that would normally need a relay.

MSD High-Current Solid-State Relay block red

 

35 AMPS PER CHANNEL, 140 AMPS TOTAL

Each of the four independent channels handles up to 35 amps continuous or 100 amps for 8 seconds, for a combined total continuous rating of 140 amps, and channels can be run in parallel for devices that need more than 35 amps.

MSD solid-state relay output terminals

 

POWER OR GROUND ACTIVATION WITH PWM

Each channel activates with a single wire by switching power or ground, and the module accepts a Pulse Width Modulation (PWM) signal with a 50% to 90% duty cycle range, operating from a 7 to 20 volt supply.

MSD solid-state relay terminal block

 

BUILT-IN PROTECTION AND DIAGNOSTICS

LED status indicators confirm proper wiring and operation of each channel, and built-in automatic over-temp, short circuit, and overload protection with channel reset guard the system if a problem arises.

 

FLEXIBLE MOUNTING

The relay block mounts with the supplied hardware, and its mounting tabs rotate 90 degrees to accommodate a wide range of mounting locations.

MSD solid-state relay with mounting hardware

 

Features:

  • Replaces four standard relays and eliminates unsightly wiring
  • 4 independent channels, 35 amps each continuous or 100 amps for 8 seconds
  • Combined total continuous current rating of 140 amps
  • Single wire activation by switching power or ground
  • Channels can be run in parallel for loads over 35 amps
  • PWM capable with a 50% to 90% duty cycle range
  • Over-temp, short circuit, and overload protection with channel reset
  • Diagnostic LEDs and rotating mounting tabs for flexible installation

 

Specifications:

  • Brand: MSD
  • Product Type: Solid-State Relay Block
  • Channels: 4 Independent
  • Continuous Current per Channel: 35 Amps
  • Peak Current per Channel: 100 Amps for 8 Seconds
  • Total Continuous Current: 140 Amps
  • Operating Voltage: 7-20 Volts
  • Activation: Power or Ground, Single Wire
  • PWM Duty Cycle: 50% to 90%
  • Protection: Over-Temp, Short Circuit, Overload
  • Diagnostics: LED Status Indicators
  • Color: Red
  • Warranty: 1 Year

 

Included:

  • (1) MSD High-Current Solid-State Relay Block, Red
  • (1) Set of Mounting Hardware

 

Fitment:

  • Universal, for electrical accessories on 7-20 volt systems

 

Notes:

  • 1 Year Warranty
  • Channels can be run in parallel for loads over 35 amps
  • Warranty does not cover modifications, alterations, or misuse

Product Specs

SKU:
7564-HC
Brand:
MSD Ignition

You might also like