MSD Ultra 6AL Ignition Control Box Black - App Programmable

The Ultra 6AL greatly expands on the capabilities of the 6-series line with three rev limiters (Launch, Burnout, and Step Retard activation) and is wirelessly controlled from a smart phone via the "MSD Ultra 6AL" app. A Programmable Step Retard (up to 30 degrees) is available for: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation. High level of security connection from phone to Ignition box (encryption) including sequence in push button implementation. Mobile app available settings include Cylinder selection, Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value, Start retard value.

The Ultra 6AL Plus features boost dependent timing control up to 400 kPA (58 PSI / 4 BAR internal sensor), making it the ultimate ignition box for moderately boosted vehicles utilizing a blow-through or draw-through carburetor. Program through the "MSD Ultra 6AL" app or MSDView software via the integrated USB port. Programmable timing curves in 2D Plots or 3D tables (RPM vs Timing vs MAP Pressure) - you can plot the 3D graph and edit a table 20x20 either from Mobile app (phone) or from MSDView (laptop). Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, and Max (Race) RPM Value.

Features:

• The Ultra 6AL expands on the 6-series line with wireless control via the “MSD Ultra 6AL” app.
• Built-in tri-step RPM rev limit capability with Launch, Burnout, and Step Retard activation.
• Programmable Step Retard (up to 30 degrees) for On Ramp time, Off Delay, Off Ramp Time, and Engine RPM activation.
• Programmable Start Retard with options for 0, 10, and 20 degrees.
• Mobile app settings include Cylinder selection, Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value, and Start retard value.
• Alerts and monitors available.

   Connectivity and Communication

• High-level security connection from phone to Ignition box with encryption and sequence in push button implementation.
• MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product.

   Performance and Efficiency

• High conversion efficiency for minimal heat generation and maximum spark energy output with less current draw.
• Consistently high spark energy of 135mJ to 150mJ per firing from idle to redline RPM.
• Powerful capacitive discharge of multiple sparks improves performance, quickens throttle response, and enhances starting.
• Spark series duration lasts for 18 degrees of crankshaft rotation.
• High RPM operation and maximum output using Blaster HVC, PN 8252 or HVC II, PN 8253.

   Installation and Compatibility

• Operates on most 7 to 28 volt electrical systems.
• Connects to points, magnetic pickups, and Hall/Crank Input distributors on 4, 6, and 8-cylinder engines.

   Safety and Alerts

• Fully protected against an open coil, shorted coil, and open load.
• Tach output included.

Specificationss

• Brand: MSD
  
• Color: Black
  
• Current Draw: 0.8 Amps per 1,000 RPM
  
• Emission Code: 4
  
• Features: Rev Limiter
  
• MAP Sensor: 4-Bar
  
• Primary Voltage: 520-540 Volts
  
• Product Type: Digital 6AL Ignition Control Box w/Rev Control
  
• RPM Range: 15,000 RPM with 14.4 Volts
  
• Sale Category: Ignition
  
• Secondary Voltage: 45,000 Volts
  
• Spark Energy: 135mJ - 150mJ Per Spark
  
• Voltage Required: 12-15 Volts, 7 Volt Start
  
• Warranty: Limited 1 Year Warranty
  
• Weight and Size: 3.3" x 5.2" - 498 Grams
• Weight: 2.825
  
• Length: 11
  
• Width: 10.05
  
• Height: 3.2

Fitment:

• Easily installs on 4, 6, 8-cylinder engines with Hall/Crank Input distributors

Included:

• (1) MSD Ultra 6AL Ignition Control - Black
  

Note:

• Limited 1 Year Warranty
  
• Buyer is responsible for ensuring that it uses the products (and its vehicle) in accordance with all applicable laws, regulations, guidelines, and standards of care