PRP (2) Gray 5-Point 3" Harness/Seat Belt Bypass Connector For Polaris & Can-Am

This 5 point harness with 3″ belts matches safety and comfort. The 5 point harness has sewn in shoulder pads that stop chaffing on the neck and adds extra comfort, especially on long rides off-road. Includes all black hardware for cool styling. The EZ adjusters allow you to adjust your shoulder straps quickly, even if they are dirty or muddy. The harness also has a removable sternum strap, and a red latch guard on the lap belt. The lap belt bolts in. The shoulder harness and crotch strap can either bolt down or wrap around a roll bar. SFI 16.1 certified for racing.Harness Override Connector will bypass the factory governor (15 mph) when seat belts are not connected. Factory style clip just plug in and go. When installing harnesses in SxS you will find that the computer system knows when you're not wearing your seat belt and will interrupt the ignition. Great idea for stock seat belts not so good for 4-point harnesses. The Harness Override Plug has been designed to close the open loop system and allow for you to use the full potential of your motor. No wiring skills required for this install all you have to do is unplug the old and plug in the new.

Features:

• Sewn in pads
• SFI certified for racing
• Removable sternum strap
• 5 point, 3 inch safety harness
• All Black hardware and EZ shoulder adjusters

Fitment:

• 2015+ Polaris General
• 2015+ Polaris Ranger
• 2015+ Polaris RZR
• 2015+ Can-Am Commander
• 2015+ Can-Am Defender
• 2015+ Can-Am Maverick
• 2015+ Can-Am Maverick X3

Includes:

• (2) PRP Gray 5.3 Harness
• (1) Seat Belt Harness Override Connector

Note:

• Never use with child car seats or boosters.
• This 5 point competition restraint system is intended for UTV or other off-road vehicle-not replacement for FMVSS 209 restraints.
• Proper installation and consistent use of the 5 point harness restraint system is critical to your safety in event of accident. To reduce risk of serious injury or death
• Inspect all components of the harness restraint system regularly & replace as indicated by accident, wear or abrasion. Replace no later than 2 years from date on SFI 16.1 tag.
• Use all belts provided. Secure lap belt first; low and snug across hips. Sternum strap tight at chest line (min. 4” below neck). Adjust remaining straps per instructions and confirm fitment restrains user & provides safe clearance from wheel, dash, roll cage, etc.