RockJock Billet Aluminum RockNut 1 Ton Tie Rod Assembly - Universal
RockJock Billet Aluminum RockNut 1 Ton Tie Rod Assembly - Universal
RockJock Billet Aluminum RockNut 1 Ton Tie Rod Assembly - Universal
RockJock Billet Aluminum RockNut 1 Ton Tie Rod Assembly - Universal
RockJock

RockJock Billet Aluminum RockNut 1 Ton Tie Rod Assembly - Universal

SKU: RJ-432102-101

SELECT FITMENT

See If This Product Fits Your Vehicle

$900.00
$900.00
$930.00

Free Shipping

Free ground shipping on all orders over $99
Description

Have you installed a 1 ton front differential and are looking for a Tie Rod? In most instances that we are aware of – this is your answer! If you have custom built a 1 ton front differential, if you have purchased a 1 ton differential and are unhappy with the tie rod supplied with it or if you have installed knuckles on your stock differential that have a 1 ton taper this aesthetically beautiful option may be the tie rod solution you are looking for!

RockJock's completely bolt-on Modular Extreme Tie Rod is commonly referred to as our 2 1/2 ton tie rod. Features include a massive 1 5/8 in. diameter billet 7075-T6 aluminum bar with our tapered RockNut ends machined into the bar and RJ logos engraved at both ends, 1 1/4 in. RH/LH thread RockNuts, 1 1/4 in. RH/LH thread forged steel rod ends and removable rod end cartridges that may be used in standard or reversed orientation.

The RockNuts featured on this tie rod feature collet design as opposed to traditional jamming with a nut. The steel nut with a female taper tightens against an intersecting male taper machined onto the control arm. When tight, the components are bound together and are bound onto the threads of the rod ends with incredible force that is not attainable via a traditional jam nut. The right hand and left hand threads for tie rod length adjustments after installation without having to remove either end of the tie rod from the vehicle.

 

Component Specs:

  • Tie Rod Bar = 1 5/8 in. dia. x 39.69 in. long 7075-T6 aluminum
  • Tie Rod End Forgings = 1 1/4 in.-12 RH/LH threads, forged steel
  • Rod End Cartridges = 1 ton taper on the pin, 1 3/4 in.-12 threads on the O.D. and
  • 9/16 in.-18 threads on the pin

Adjustment Range:

  • Closed - 57.89 in. C-C
  • Open - 61.36 in. C-C

Fitment:

  • Universal Application - 1 ton front differentials w/ 1 ton taper knuckles

Included:

  • (1) Billet Aluminum RockNut Tie Rod Assembly

Note:

  • Wrench flats on the bar require a 1 1/2 in. wrench, RockNuts require a 1 3/4 in. wrench
  • Rod end cartridges require our JK-9703W wrench or a 2 in. wrench or impact socket
  • If you decide to flip the Rod End Cartridges to mount the components in a high-steer configuration, keep in mind that all of the corresponding tapered holes must be retapered from the other direction as well
  • Intended for use with 0–6 in. of lift out of the box
  • Do not use this unit outboard of the lift amount requirements outlined above! Deviating from these parameters will cause damage and premature wear to the components!
  • You must grease all rod ends via their zerk fittings before use
  • Grease unit with non-synthetic, hi-moly lube grease, such as our CE-9013G
Fitment
Fitment

Product Specs

SKU:
RJ-432102-101
Brand:
RockJock

Related Products

Vendor
Example product title
$900.00
$900.00
$930.00
Vendor
Example product title
$900.00
$900.00
$930.00
Vendor
Example product title
$900.00
$900.00
$930.00
Vendor
Example product title
$900.00
$900.00
$930.00
Vendor
Example product title
$900.00
$900.00
$930.00
Vendor
Example product title
$900.00
$900.00
$930.00
Vendor
Example product title
$900.00
$900.00
$930.00
Vendor
Example product title
$900.00
$900.00
$930.00
Vendor
Example product title
$900.00
$900.00
$930.00
Vendor
Example product title
$900.00
$900.00
$930.00