SuperATV Polaris RZR 900 6" Portal Gear Lift

SKU: PGH6-1-44-301

SELECT FITMENT

See If This Product Fits Your Vehicle

$3,099.95
$3,099.95
$3,391.95

Free Shipping

Free ground shipping on all orders over $99
Year and Model: Manufactured before 3/2/2015, 2 Seat
Portal Setup: Cast Housing, 30% Gear Reduction, Single Idler
Lift Kit and Frame Stiffener: Without 7-10 inch Lift Kit, No frame stiffener

SuperATV’s GDP 6" Portal Gear Lift for the Polaris RZR 900 is designed to give you more clearance for bigger tires, more torque to the ground, and reduced stress on your drivetrain. Choose a 30%, 45%, or 60% gear reduction, and optionally dual idler gears for maximum strength.

GDP dual idler portals use a second idler gear to spread the load over more surface area for more reliable torque transfer. The gears are precision CNC ground and made from 9310 steel alloy for a strong, quiet, and reliable gear set.

These 6" portals are built to help your RZR 900 handle mud, hills, and rough trails while reducing wear on axles, differential, prop shaft, and transmission. The portal gear reduction is placed directly in the hub to help lower drivetrain stress compared to stock.

Features include reinforced housings for gear retention and optimized oil flow, 5/16" advanced alloy backing plates, advanced gaskets and O-rings, a sealed input gear, double-lipped output seal, double-angular contact output bearings, and roller idler and drive bearings. Portal Blood gear oil is available separately for GDP portals.

Available features include billet or cast aluminum housings, a dual idler gear configuration, cool and quiet precision-ground gears, a 1.5" diameter 4340 hardened steel drive shaft, a universal hub that fits all major bolt patterns, and a 1" front and rear offset for 2" total extension.

Includes:

  • (4) Assembled portal hub boxes complete with 9310 gears, seals, output shaft, gaskets or O-rings, and thrust bearings
  • (4) Universal hubs and precision-ground stainless steel slotted rotors with lugs
  • (4) Specialized steel alloy backing plates
  • (4) Steel caliper mounting plates
  • (2) Steel steering arms
  • Extended brake lines
  • All required hardware, including recessed castle nut socket

Recommended tire and suspension setup with 6" portals:

  • Up to 30" tires: Stock suspension
  • 30" tires: 2" lift kit
  • 32" tires: RZR 900 to RZR 900 S conversion kit with 3" lift kit
  • 32" tires: RZR 900 to RZR 900 S conversion kit with 3" lift kit and 2" lift kit
  • 44" tires: 7-10" lift kit

Max tire sizes are measured at full compression and full turn. The listed tire sizes are the largest that fit without rubbing; with minor trimming or a small amount of rub, larger tires can be used. If you need help choosing the right gear reduction, use the portal gear reduction calculator.

Fitment:

  • Polaris RZR 900: 2015-2020
  • Polaris RZR S 900: 2015-2020
  • Polaris RZR 4 900: 2015-2018
  • Polaris RZR S4 900: 2018
  • Polaris RZR 900 XC: 2015-2017

Wheel requirements:

  • 18" or larger wheel required
  • 18" wheels cannot exceed 4-1/2" backspacing
  • 20" and larger wheels cannot exceed 5" backspacing
  • Wheels need a center hole of at least 3.25" (82.55mm) or require a 1" wheel spacer

Patent # 11,299,042Patent # 11,318,787

Product Specs

SKU:
PGH6-1-44-301
Brand:
SuperATV

Related Products