Upgrade your 2008–2010 Ford F-250 or F-350 Super Duty 4WD Gas truck with this Zone Offroad 4-inch Radius Arm Lift Kit engineered for strength, stance, and drivability. Designed specifically for gas models, this system includes full-length replacement coil springs, heavy-duty radius arms, steering correction components, and a rear block kit to properly level your truck. Achieve improved ground clearance and clearance for up to 35-inch tires with the proper wheel setup.
Built using high-strength 1/4-inch steel construction and paired with premium FOX 2.0 Adventure Series shocks, this lift kit delivers consistent performance both on and off the road. The internal floating piston monotube shock design provides superior damping control while maintaining ride quality. Zone Offroad combines durability, clean geometry correction, and aggressive Super Duty styling in one complete system.
Features:
- 4-inch front lift improves stance and ground clearance
- Full-length coil springs maintain ride comfort daily
- Heavy-duty radius arms correct caster and geometry
- Track bar re-centers front axle for improved stability
- Rear lift block levels stance and rear ride height
- Black e-coated U-bolts resist corrosion and wear
- FOX 2.0 shocks improve damping and ride control
- Clears up to 35-inch tires with minor trimming required
Specifications:
- Brand: Zone Offroad
- Front Lift Height: 4 Inches
- Rear Lift Height: 5 Inches
- Front Lift Method: Coil Spring and Drop Bracket
- Rear Lift Method: Block
- Shock Series: FOX 2.0 Adventure Series
- Shock Type: IFP Monotube
Included:
- (2) Front Coil Springs
- (2) Heavy-Duty Radius Arms
- (1) Track Bar
- (2) Rear Lift Blocks
- (4) Rear U-Bolts
- (2) Sway Bar Relocation Brackets
- (2) FOX 2.0 Front Shocks
- (2) FOX 2.0 Rear Shocks
- (1) Hardware Kit
Fitment:
- 2008-2010 Ford F-250 Super Duty 5.4L 4WD Gas
- 2008-2010 Ford F-250 Super Duty 6.8L 4WD Gas
- 2008-2010 Ford F-350 Super Duty 5.4L 4WD Gas
- 2008-2010 Ford F-350 Super Duty 6.8L 4WD Gas
Note:
- 3 Year Warranty
- If your vehicle is equipped with both a stock 4" rear block and a top mounted overload/helper spring, select the longer 18.5" Rear U-Bolts.
- This kit is not designed for dually models, but may me easily adapted to accommodate your truck.
- This lift will require replacing your truck's factory rear block to achieve a level stance; total height gained will vary depending on the size of the factory block.
- Exhaust modification may be required to clear the front driveshaft on gas models. See installation instructions for more information.
- Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.