Give your 2008 Ram 2500 Power Wagon the height, capability, and aggressive stance it deserves with the Zone Offroad 5” Suspension Lift Kit. Designed specifically for the Power Wagon’s 4-link suspension, this system delivers improved articulation, increased ground clearance, and the strength needed for off-road performance. With clearance for up to 37” tires, your truck gains a commanding presence both on and off the pavement.
This lift kit includes full-length coil springs, heavy-duty upper and lower control arms, a track bar relocation bracket, steering correction components, and rear lift hardware to ensure factory-like handling after installation. Now equipped with Nitro Series shocks, the system provides enhanced damping control with nitrogen-charged twin-tube performance, self-lubricating seals, and rugged dual-welded ends for durability in demanding conditions.
Features:
- Nitro Series shocks offer nitrogen-charged performance and smooth damping
- Upper & lower control arms improve strength, caster, and articulation
- Full-length front coil springs lift while maintaining ride quality
- Track bar bracket re-centers the front axle after lifting
- Dropped pitman arm corrects steering geometry for stable handling
- Bump stop extensions protect suspension at full compression
- Rear block & U-bolt kit levels truck and increases tire clearance
- 100% bolt-on design simplifies installation for most setups
Specifications:
- Brand: Zone Offroad
- Rear Lift Height: 3 inches
- Front Lift Method: Coil Springs
- Rear Lift Method: Lift Block & U-Bolts
- Shock Type: Nitro Series Gas-Charged
- Shock Design: Twin-Tube, 10-Stage Velocity-Sensitive Valving
- Shock Coating: Black Powder Coat Finish
- Drive Type: 4WD Only
- Max Tire Size: Up to 37" (trimming may be required)
- Vehicle Application: 2008 Ram 2500 Power Wagon (5.7L Gas)
Included:
- (2) Front Coil Springs – Heavy-duty
- (2) Nitro Series Shocks – Nitrogen-charged, twin-tube
- (2) Heavy-Duty Upper Control Arms – Steel construction
- (2) Heavy-Duty Lower Control Arms – Steel construction
- (1) Dropped Pitman Arm – Correct steering geometry
- (1) Track Bar Relocation Bracket – HD steel
- (1) Rear Lift Block – Steel
- (4) Rear U-Bolts – Coated hardware
- (2) Bump Stop Extensions – Front
- (2) Sway Bar Relocation Brackets
- (1) Hardware Kit – Complete bolts, brackets, components
Fitment:
- 2008 Ram 2500 Power Wagon 5.7L Gas 4WD
Note:
- 3 Year Warranty
- Professional installation and alignment required after lift
- Minor trimming may be needed depending on wheel/tire setup
- Gas engines may sit slightly taller due to lighter weight vs diesel
- Two-piece driveshaft models may require a carrier bearing drop kit
- Not designed for dually models (may be adapted with modifications)
- Check rear axle diameter before ordering to ensure proper kit configuration
- If the steering gearbox has been replaced and the sector shaft is 1.5"–1.625", kit requires ZOND8404