Valair Heavy Duty Upgrade Clutch For 05.5-18 5.9L & 6.7L Cummins

Valair Heavy Duty Upgrade Clutch For 2005-2018 Dodge Ram 5.9L & 6.7L Cummins

The Valair Heavy Duty Upgrade Clutch NMU70G56-01 for your 2005.5-2018 Dodge 5.9L/6.7L Cummins is better than the OEM clutch you get from your dealer. This is due to the better quality materials used, the quality of the manufacturing process, and QC. Some companies also offer higher plate loads as options to the standard plate thus giving the clutch better holding ability than its OE counterpart. Best suited to trucks without or only minor power modifications. Good for light towing at stock HP levels. For use on 2005.5 & up G56 6-Speed Transmissions.

Features:

• 13.00" x 1.375" Stock Organic Replacement
• Premium Brass Woven Organic Facings
• HD Spring Hub
• Rated @ 400HP / 900 ft lbs Torque
• 3400# Pressure Plate

Kit Includes:

• New G56 Solid Flywheel
• Pressure Plate
• Clutch Disc
• Release Bearing
• HD Pilot Bearing
• Bolt Kit
• Alignment Tool & Upgraded HD Hydraulic Kit NMU70HYD-03

Fitment Application:

• 2005.5-2007 Dodge 5.9L Cummins Diesel 'With G56 Transmission
• 2007.5-2018 Dodge 6.7L Cummins Diesel 'With G56 Transmission 

G56 Gear Rollover Facts:

• When converting a G56 transmission over to a solid mass flywheel vs. dual mass flywheel, gear rollover is inevitable. Gear rollover noise is often heard when the vehicle is idling or under a load in low RPM ranges (often referred to as sounding like marbles in the transmission). This is completely normal.
• Gear rollover noise is caused by reverse engine spike and can in most cases be drastically reduced by simply changing the oil in the transmission or reducing engine spike produced by inadequate engine components (ex. misfiring injector, FCA problems, Electronic programming). The oil recommended by the transmission manufacture Mercedes-Benz is Mobil Delvac Synthetic Transmission Fluid 50. We at Valair Inc. recommend draining completely and refilling with 7 quarts. Only 6 quarts will fit when utilizing the fill hole, the final quart will need to be filled through the shift tower.