RT Pro Light Duty Trail Replacement Spring Kit For Polaris RZR XP 1000 Two Seater

RT Pro Light Duty Trail Replacement Spring Kit For Polaris RZR XP 1000 Two Seater

After years of testing, development and several years on the market, RT Pro has proven to have the best replacement spring options for todays UTV's. Now we are happy to offer this option for the RZR XP 1000 using OEM Walker Evans shocks. This is a RT Pro D.I.S.S. Dual Rate Kit in the front which gives a substantial improvement in ride quality while improving handling as well at G-out resistance. We've found the perfect combination of spring length to rate ratio and are very happy with our results. This kit is for all four corners of the machine. It provides a short spring, a long spring and a delrin spacer for each shock as well as adapters for the front shocks to run 2.5" springs.

The XP 1000 is a completely different animal. It's suspension works unlike any other model in the past and unfortunately we don't think it works very well! The rear end lifts hard when braking and does not reset when getting back on the gas. This makes the RZR very top heavy in the turns and can cause a "two wheeling" effect which ultimately ends up in a roll over or at least, very slow and boring performance. Another inherent negative is the dreading "bucking" effect all RZR's are known for. No matter what the OEM says, it's still very apparent in the RZR XP 1000.

This spring kit has helped racers set track records while taking victories, in many different venues from desert racing to XC racing and everything else in between. The spring kit alone can make a night and day difference in the performance of the RZR. This is enough of an improvement most recreational driver's will never need to make any other internal adjustments to the shocks and will be able to fine-tune the ride with the external adjustments provided on the OEM shocks.

Features:

• This kit is 100% MADE IN THE U.S.A. 
• Kit includes (8) springs, (4) spring spacers and 4 front spring adapters.
• All springs come with silver powdercoat.

Spring Rate:

• LIGHT - This kit was designed to lower the car at minimal preload. At minimum, the car at OEM weight should sit around 11-12" rear when measured from the bottom of the chassis using OEM sized tires and wheel offsets. The front will sit higher at 13-14". This kit is specifically designed for short course racing or any other application where a lowered center of gravity is desired and revalving is highly recommended for best performance.

Fitment:

• RZR XP 1000 2 SEAT model.
• Will NOT fit Fox Edition RZR XP1000 2-Seat With Fox IBP Shocks