RockJock Johnny Joint Adjustable Control Arm Set For 2007-2018 Wrangler JK

This is our complete set of all 8 Johnny Joint® adjustable length control arms for the '07 & up Jeep JK Wrangler. All arms feature heavy tubular steel construction and Johnny Joint® rod ends on both ends. Johnny Joint rod ends offer 30 degrees of overall travel, are urethane bushed, and are fully rebuildable!

These are the adjustable length Johnny Joint® front upper control arms out of the RockJock® JK off road suspension system. Arms are fabricated from 1.25" o.d. x .188" wall d.o.m. steel tubing, feature the 2" Johnny Joint® rod end on one end, and a formed steel fork and jam nut on the other end. New grade 8 bolts are furnished for the frame end of the arms, while the housing end retains the factory hardware. Arms and ends are finished in semi-gloss black powder coat.

These are the adjustable length Johnny Joint® rear upper control arms out of the RockJock® off road suspension systems for the Jeep JL & JK Wranglers. Arms are fabricated from 1.25" o.d. x .188" wall d.o.m. steel tubing, feature the 2 1/2" Johnny Joint® rod end on one end, and the 1" RH thread forged 2 1/2" Johnny Joint® and jam nut on the other end. Arms are finished in semi-gloss black powder coat and the forged ends are finished in gold zinc plating.

These are the adjustable length Johnny Joint® front lower control arms out of the RockJock® JK off road suspension system. Arms are fabricated from 1.625" o.d. x .250" wall d.o.m. steel tubing, feature the 2 1/2" Johnny Joint® rod end on one end, and the 1 1/4" RH thread forged 2 1/2" Johnny Joint® and jam nut on the other end. Arms are finished in semi-gloss black powder coat and the forged ends are finished in gold zinc plating.

These are the adjustable length Johnny Joint® front lower control arms out of the RockJock® off road suspension systems for the Jeep JL & JK Wranglers. Arms are fabricated from 1.625" o.d. x .250" wall d.o.m. steel tubing, feature the 2 1/2" Johnny Joint® rod end on one end, and the 1 1/4" RH thread forged 2 1/2" Johnny Joint® and jam nut on the other end. Arms are finished in semi-gloss black powder coat and the forged ends are finished in gold zinc plating.

Features:

• 2-year warranty.
• Works with any size tire
• Semi-Gloss Black Powder Coat Finish
• No Modifications needed for installation
• 1.250"-1.625" o.d. x .188"-.250" wall 4130 chromemoly steel tubing
• Designed for stock height or up to 6" lifted vehicles
• 1" thread forged steel greasable ends

Fitment:

• 2007-2018 Jeep Wrangler JK All Models

Note:

• Can be used on stock and lifted Jeeps